Verizon LG GizmoPal 2 User Manual

This booklet is printed with soy ink. Printed in Mexico

This booklet is made from 90% post-consumer recycled paper.

User Guide

Usuario Guía del

User Guide

MFL69311801 (1.2)

Table of Contents

What You’ll Find in the Box .......................................................2

About Your GizmoPal 2 .............................................................3

Charging the Battery ..................................................................4

Turning Your GizmoPal 2 On and Off ......................................5

Linking Your GizmoPal 2 to Your Smartphone ........................6

Caregivers and Contacts ............................................................8

The GizmoHub App ................................................................. 10

Using GizmoPal 2 ................................................................... 20

LED Colors and GizmoPal 2 Status ...................................... 22

Safety ........................................................................................ 23

Limited Warranty Statement .................................................. 48

What You’ll Find in the Box

Check that all of the following components are included in the GizmoPal 2 box:

GizmoPal 2 in its Wristband

Charging Cord

Charging Adapter

Get to Know Your Device Guide

Product Safety & Warranty Brochure

NOTE If any component is missing, please contact the store from which you bought it.

About Your GizmoPal 2

Front View

GizmoPal 2

About Your GizmoPal 2

Wristband (Holder)

Speaker

Battery, Call, and Communication Icons

Rear View

Call Button

Play Button

Microphone

USB/Charger Port

Charging the Battery

To charge the battery, open the USB/charger port cover and:

1. Plug the charging cord into the GizmoPal 2.

2. Plug the other end of the cord into the charging adapter.

3. Plug the charging adapter into an electrical outlet. The battery charging light will blink red while your GizmoPal 2 is charging and turn green when it is fully charged.

USB/Charger Port

NOTES • Don’t use the GizmoPal 2 while it’s being charged.

• Only use the charging cord and adapter included in the box to charge your GizmoPal 2.

• Make sure that you close the USB/charger port cover completely to keep out dirt and

water.

Turning Your GizmoPal 2 On and Off

Turning your GizmoPal 2 on:

Press and hold the Play button

GizmoPal 2 says “Hello”.

Turning your GizmoPal 2 off:

Press and hold the Play button

the Play button

You can also use the GizmoHub app to turn off the GizmoPal 2 from your

smartphone.

again to turn off your GizmoPal 2.

until all of the icons light up and your

until the voice prompts you to press

Linking Your GizmoPal 2 to Your Smartphone

Linking Your GizmoPal 2 to the GizmoHub App

To use your GizmoPal 2, it must be registered with the GizmoHub smartphone app. The app is available for Android™ 5.0 or higher and iOS

9.0 or higher in the Google Play Store or the Apple App Store.

The ﬁrst person who installs the GizmoHub app on their smartphone and completes the registration will automatically become the primary caregiver. The primary caregiver can register up to 3 additional phone numbers as caregivers or contacts. Caregivers will also need to install and register with the GizmoHub app.

NOTES • The smartphone must have Internet access to complete registration.

    • The GizmoHub app is free but data usage may apply when downloading and using the

Step 1: Download and install the GizmoHub app on your smartphone

Decide who you want to be the primary caregiver. Then download and install the GizmoHub app on their smartphone from the Google Play Store or the Apple App Store.

NOTE Data usage may apply for app download and use.

app.

Linking Your GizmoPal 2 to Your Smartphone

Step 2: Activate your GizmoPal 2

1. Your GizmoPal 2 should start activating automatically the ﬁrst time you turn it on. Your GizmoPal 2 should say, “I’m setting up. This could take a few minutes.”

2. Then, your GizmoPal 2 will turn off and on by itself.

3. When activation is complete, your GizmoPal 2 will say, “Yay! I’m ready.”

NOTE Once your GizmoPal 2 is activated, the up and down arrows will blink green every 20

seconds. If activation fails, your GizmoPal 2 will tell you something went wrong and the up and down arrows will blink red every 2 seconds. You can try to activate again by pressing the Call button

Step 3: Register as a caregiver using the GizmoHub app

Open the GizmoHub app on your smartphone and follow the instructions in the app and the voice instructions on your GizmoPal 2 to:

Add additional contacts

You will be asked for your GizmoPal 2’s mobile number. You can ﬁnd the mobile number on your customer receipt or by pressing either button (

) on your GizmoPal 2 after it has been activated.

NOTES • If you previously registered with the GizmoHub app and want to register a new

   • Descriptions and screen images in this user guide may differ due to GizmoHub app

smartphone that has your same mobile number, register your new phone as described above. Then you'll receive a text message with a security code that you'll need to enter to register the new smartphone. Entering the code will unregister the previous device.

updates.

Caregivers and Contacts

The primary caregiver can use the GizmoHub app to register up to 3 additional phone numbers as contacts or caregivers. GizmoPal 2 contacts and caregivers can call the GizmoPal 2 from their registered phone number and receive calls from the gizmo. Caregivers can also use the app.

Primary Caregiver

Make calls to and receive calls from gizmo

Use the GizmoHub App to locate gizmo

Use the GizmoHub app to change gizmo settings

Use the GizmoHub App to turn off gizmo

Use the GizmoHub app to manage caregivers and contacts

To view GizmoPal 2's list of caregivers and contacts, tap SETTINGS >

Contacts.

Other Caregiver

v v v

v v

Contacts

Caregivers and Contacts

Adding Contacts

1. From the primary caregiver’s GizmoHub app, tap SETTINGS > Contacts.

2. Tap the Add icon

3. Enter the contact’s name and the phone number and what your child calls the contact.

4. Select Caregiver if you also want the contact to be able to use the GizmoHub app to locate the gizmo.

5. Enter the contact's information.

6. Tap SAVE.

NOTE Caregivers will have to download and install the app on their smartphone.

Caregivers using a smartphone may also want their phone number registered as a contact so they can receive and make calls to the gizmo.

Deleting Contacts

1. From the primary caregiver’s GizmoHub app, tap SETTINGS > Contacts.

2. Touch and hold the contact that you want to delete (except Primary Caregiver).

3. Tap REMOVE to delete it.

NOTE Deleting the primary caregiver will cause the GizmoPal 2 to reset and all contacts and

caregivers will be deleted from the gizmo and have to be registered again by a new primary caregiver.

The GizmoHub App

GizmoPal 2 caregivers use the GizmoHub app to connect and communicate with GizmoPal 2.

Call

GizmoHub App Home Screen

Find

GizmoHub Options for Your GizmoPal 2

From the menu , you can see the following options:

Home

Set up PIN for security

Help

Send feedback

Add another gizmo

Terms & Conditions

Version number

From the drop down (See page 12 for information on Adding Another Gizmo.)

you can switch to viewing other linked gizmos.

The GizmoHub App

Home Screen /Maps Tab

The GizmoHub Home screen is the Maps tab. From here you can tap the Find icon location on page 13.)

to locate your gizmo. (See Checking GizmoPal 2’s current

Setting Up a PIN for Security

You can create a security PIN so that others can’t open the GizmoHub app on your smartphone.

1. From the GizmoHub app on the caregiver’s smartphone, go to Menu > Set up PIN for security.

2. Read the information and tap SET PIN.

3. Read the PIN security information and tap OK.

4. Enter the 4-digit PIN and tap SAVE PIN.

5. Enter the 4-digit PIN once more and tap CONFIRM PIN.

NOTE To change the security PIN, remove the existing PIN using the same menu, then create

a new PIN.

GizmoHub Help

GizmoHub Help includes Help information for different gizmos. The GizmoPal 2 Help information includes:

Setting up your GizmoPal 2

Using your GizmoPal 2

Checking your GizmoPal’s location

About caregivers and contacts

Managing caregivers and contacts

GizmoPal 2 status icons

The GizmoHub App

Send Feedback

Tap Send feedback to email Gizmo Support directly from your smartphone.

Adding Another Gizmo

You can link multiple gizmos (including GizmoPals, GizmoPal 2s and GizmoGadgets) to the GizmoHub app. The app will show you information on each gizmo, one at a time and all the tabs will relate to the gizmo shown.

To link another gizmo to your app, go to Menu

To view information for other linked gizmos, open the list of linked gizmos by tapping the name of the gizmo you’re viewing at the top of the Home screen or the Menu

. Then select the gizmo you want to view.

> Add another gizmo.

GizmoHub App Home Screen GizmoHub App Menu Screen

The GizmoHub App

Making Calls From the GizmoHub App

From the GizmoHub app on the caregiver’s smartphone, tap the Call icon

to call the GizmoPal 2.

Call ScreenGizmoHub App Home Screen

NOTE When the Auto-answer calls setting is turned on, GizmoPal 2 will automatically answer

the call in 10 seconds even if the Call button automatically end after 1 minute.

on the Gizmo isn't pressed. The call will

Checking GizmoPal 2's Current Location

From the Home screen or MAPS tab, tap the Find icon to search for your gizmo's current location. While the GizmoHub app searches, the Find icon

will show a progress indicator, the accuracy bubble will fade in and out, and search information will be shown. When your gizmo is located, the new location marker will be shown on the map along with the latest location information.

NOTE For additional location features such scheduling location checks and setting alerts, see

pages 15-17.

GizmoHub App Home Screen

The GizmoHub App

About Location Information and Accuracy

Your GizmoPal 2's location will usually be shown as a place name or an address. When a place name or address can't be determined for a location, GPS coordinates will be shown.

The GizmoPal 2's location is primarily determined using Google’s GPS location service. If unsuccessful, the GizmoHub app will attempt to locate the GizmoPal 2 using a different method.

When the GizmoPal 2 is located in a place where GPS or Wi-Fi isn’t

available (or if the GizmoPal 2 is turned off), the GizmoHub app won’t be able to display location information.

Location information may be unavailable, inaccurate, or incomplete

depending on your gizmo's surroundings.

Note that it may take up to 3 minutes to get your gizmo's location

information.

A location error of up to several miles can occur.

If the GizmoPal 2 is indoors, the location can be inaccurate or

unavailable.

NOTE The Wi-Fi connection for this GizmoPal 2 is reception only. (There's no Wi-Fi signal

transmission.)

Settings

From the GizmoHub app on the caregiver’s smartphone, tap SETTINGS. From here, you can see and control these settings on your GizmoPal 2:

Location

Sounds

Auto-Answer Calls

Battery Life

Contacts

Turn Off Gizmo

About Gizmo

The GizmoHub App

Gizmo's Name and Mobile Number

The top of the Settings screen shows the name of the gizmo user and the gizmo's mobile number. Tap the name to edit it.

NOTES • All settings are available to primary caregivers. Other caregivers can use only

   • For detailed settings information see page 18.

Auto-answer calls and Battery life.

GizmoHub App Settings Screen

Using Location Settings

The primary caregiver can set alerts and location checks to keep track of your gizmo’s location, and name places your child visits for easy identiﬁcation.

Go to SETTINGS > Location.

The GizmoHub App

Naming Places

You can name places your child visits often, like “home”, “school” or “Grandma’s house”.

What do I have to do?

For each place, you’ll enter the address, give your place a name, and select the size of the area around your place.

You can also name places as you set Place Alerts.

What will happen?

Place names will be shown instead of the address on the map and in notiﬁcations for alerts and location checks. You can also use the location name when setting Place Alerts and Location Checks.

NOTE GizmoHub keeps separate place lists for each of your gizmos.

Use Place Alerts to See When Your Gizmo Is at One of Your Places (Primary Caregivers Only)

When your child is supposed to be at certain place during a certain time, you can set a place alert to see when your child’s gizmo arrives and leaves that place. For example, maybe your child is supposed to be at the library on Wednesday between 3 and 5 PM. A place alert can send you notiﬁcations when your child’s gizmo arrives at the library at 3:05 PM and leaves at 4:50 PM.

What do I have to do?

For each Place Alert you’ll enter a place name or address, the size of the area, start time, duration, and days you want an alert.

What will happen?

During the time period you set for the Place Alert, your phone will receive notiﬁcations if your gizmo enters or leaves the set area. The GizmoHub map will also show a green circle when the gizmo is at the place and a red circle if it leaves.

+ 39 hidden pages

Verizon LG GizmoPal 2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

What You’ll Find in the Box

About Your GizmoPal 2

Charging the Battery

Turning Your GizmoPal 2 On and Off

Linking Your GizmoPal 2 to Your Smartphone

Caregivers and Contacts

The GizmoHub App