Page 1
Look for Verifone online
help videos on YouTube
– search for “Verifone
Training Academy.”
VeriFone Vx680 BT Series Installation Guide
CHIP CARD PROCESSING: WHAT YOU NEED TO KNOW
This device has the ability to process EMV chip cards. If you are
set up to accept chip cards, you will notice a few dierences.
1. Chip cards must be inserted into the device or pin pad if
attached (swiped transactions are not allowed).
2. The chip card must remain in the device until the transaction
is complete.
3. The transaction may require a customer to enter a PIN
(similar to a debit transaction).
4. Chip card transactions require the credit card to remain in
the the cardholder’s possession at all times.
For more information regarding EMV chip card acceptance and
processing, please visit: www.paymentstart.com/secure
CONTACT US:
www.paymentstart.com
for user guides and other DIY tips
1-866-451-4007
Activation & Training
8:30 AM – 9:00 PM ET, M-F
INSTALLATION INSTRUCTIONS
Step 1: Open box
Step 2: Follow installation instructions on page 2
Step 3: Begin processing
Your
Payment Solutions
Team
Page 2
CHARGING BASE & POWER CONNECTION
Charging Base & Power Connecon
(Place the terminal on the base for charging*)
(Connect the power cord to the base and to a power outlet)
Charging Base & Power Connecon
(Connect the power cord to the base and to a power outlet)
Inserng the Paper Roll
Charging Base
(Place the terminal on the base for charging*)
Communicaon Connecon
(Connect to a modem or router)
(Paper roll must feed as shown with terminal upside down)
Power Connecon
ETH
Inserng the Paper Roll
(Paper roll must feed as shown with terminal upside down)
(Connect to a modem or router)
(Place the terminal on the base for charging*)
COMMUNICATION CONNECTION
(Connect to a modem or router)
ETH
POWER CONNECTION
(Connect the power cord to the base and to a power outlet)
*8-12 hours of charging
is recommended daily
INSERTING THE PAPER ROLL
(Paper roll must feed as shown with terminal upside down)
Loading...