VEGA PROFIBUS PA T User Manual
PROFIBUS PA T-Connector
The PROFIBUS-PA T-Connector is
intended for the coupling of sensors,
actuators and measuring instruments.
•Type of protection IP 66
• Modular design
• Non-interrupted BUS operations, also
when being serviced
•Easy to use
• Low installation costs
• External grounding cable
•Pressure-compensation element
• EMC cable gland
PROFIBUS-PA T-Connector
standard
• 1, 2, 4, 8-way
with EMC gland
industrial + EX / ATEX
• Overvoltage protection optional
The PROFIBUS-PA installation products
are increasingly found in the
• Food industries
• Fine and speciality chemicals
• Bulk chemicals industry
The range is designed to accommodate a
wide range of customer requirements in
the harshest of environments.
These include Standard and Hazardous
Area Versions with either single or multiple
quick-connection variants with M12
connector or cable gland.
Weidmüller offers, for almost every application, a solution. In the case you don’t
see your solution here, please contact
your local sales office.
50
• For industrial application
• Standard
PROFIBUS PA
51
Technical data for pages 52-54
Temperature range
Operating temperature from -40 to 85°C
Type of protection IP 66
Material of housing high-quality aluminium alloy (AL - Si 12)
Surface stove-enamelled RAL 7001
PROFIBUS-PA - Connection tension clamp connection 0.5 - 1.5 mm
2
Cable bushing Cable gland M16
Clamping area 5.5 - 9.5 mm
Measuring instrument connector M12 x 1 4-pole contacts brass, surface CUZnAu
Installation advice
Tor ques
M16 cable gland on housing 6.25 Nm
Coupling ring M16 cable gland 4.5 Nm
Housing lid 1.8 - 2.0 Nm
External earthing cable 1.8 - 2.0 Nm
Type Cat. No.
Profibus PA T distributor type FBCon PA CG/M12 1way 8564060000
Profibus PA T distributor type FBCon PA CG/M12 2way 8564070000
Profibus PA T distributor type FBCon PA CG/M12 4way 8564080000
Profibus PA T distributor type FBCon PA CG/M12 8way 8564310000
Profibus PA T distributor type FBCon PA CG 1way 8564090000
Profibus PA T distributor type FBCon PA CG 2way 8564100000
Profibus PA T distributor type FBCon PA CG 4way 8564110000
Profibus PA T distributor type FBCon PA CG 8way 8564300000
Ordering data
The PROFIBUS-PA
is an open field-bus standard
(EN 50 170, IEC 1158-2, DIN 19 245).
It was specifically developed for the requirements of the Process Industry technology, in particular remote supply and
intrinsic safety. PROFIBUS-PA permits
several PA sensors and actuators to be
operated on one common bus. The
devices are supplied with power via
2-wire technology with the process data
communication being executed digitally.
Integration into the PROFIBUS-DP network
is carried out by means of a Segment
Coupler. Specific advantages of
PROFIBUS-PA :
• Reduced wiring costs
• Minimised design costs of the
process control system
• Remote interrogation and programming
of field devices
• Continuing development and support
through PROFIBUS User and Trade
Organisations (PNO)
Weidmüller offers here the PROFIBUS-PA
FB Connector. In the event of service or
plant modification, the PROFIBUS-PA FBConnector from Weidmüller permits the
connection or replacement of field devices
without interrupting the bus system.
Extensive accessories as well as preassembled cables and plugs round off the
program.
Field-bus components for industrial applications
Fieldbus cable
Shielding
8 50 … 70
6
Shield is connected to the enclosure via the EMC cable glands.
Thread the cable gland onto the seal, on the unprepared
fieldbus cable
Strip fieldbus cable here
Draw back the shielding braid
over the sheath of the fieldbus cable
Use ferrules!
Field-bus components for industrial applications with tension clamp connection
52
The measuring instruments are connected using an M 12 connection.
The screen is connected to the housing via the EMC cable gland.
Bus terminator:
Circuit diagram
Circuit diagram
Bus Terminator
A
A
S
S
B
B
Enclosure
1uF 50Vdc
C1
R1
100R
off on
Wire bridge
A
S
B
n.c.
APA-(3)
S
Shielding
(4)
BPA+(1)
n.c. (2)
PROFIBUS-PA T-Connector standard 1-way
Type FBCon PA CG/M12 1way
Bus terminator:
APA-(3)
S
Shielding
(4)
BPA+(1)
n.c. (2)
A
A
S
S
B
B
Enclosure
1uF 50Vdc
C1
100R
R1
off on
Bus Terminator
Wire bridge
A
S
B
n.c.
A
S
B
n.c.
PROFIBUS-PA T-Connector standard 2-way
Type FBCon PA CG/M12 2way
Ordering data
Type Cat. No.
Profibus PA T distributor type FBCon PA CG/M12 1way 8564060000
Ordering data
Type Cat. No.
Profibus PA T distributor type FBCon PA CG/M12 2way 8564070000
19
58
AAABBBSSS
R1
off on
C1
64
off on
19
64
ABSABSABSABS
on
off
C1
R1
98
off on
Loading...