VDS PM User Manual
OPERATOR
FOR SWING GATES
AND DOORS
PM/PM1
WARNING!! Before installing, thoroughly read this manual that is an integral
part of the pack
Our products if installed by qualified personnel capable to evaluate risks,
comply with norms UNI EN 12453, EN 12445
The CE mark conforms to European directive
EEC 89/336 + 92/31 + 93/68 D.L. 04/12/1992 N. 476.
PACKING CONTENTS .............................................................................
VIEW OF TYPICAL AUTOMATION AND NAMES OF COMPONENTS .............
3
TECHNICAL DATA....................................................................................
SAFETY PRECAUTIONS ..........................................................................
2
3
DIMENSIONS .........................................................................................
TYPICAL CONNECTION AND CABLE SECTION..........................................
CONSIDERATIONS FOR INSTALLATION...................................................
INSTALLATION.......................................................................................
TROUBLESHOOTING...............................................................................
PACKING CONTENTS
1- OPERATOR
4
4
5
5-6
7
8
1- KIT FASTENING PLATES AND
RELATIVE ACCESSORIES
1- UNLOCKING KEY
1- CONDENSER (230Vca)
300/400
VIEW OF TYPICAL AUTOMATION AND NAMES OF COMPONENTS
6
4
3
1
5
2
7
5
1
8
Optimal installation
1- Operator
2- External photocell
3- Flashing warning light
4- Antenna
TECHNICAL DATA
Max. weight of gate
Max. width of gate
Motors power supply
Motor power
Motor RPM
Condenser
Mechanical unlock for emergency manoeuvre
5- Internal photocell
6- Electronic control unit
7- Key-switch
8- Remote control
PM
(reversible)
1,80 (300) - 2,50 (400) - 3,50 (600) mt
12Vdc 230 Vac
50 W 250 W
900 800
/ 12,5 µF
/ / With key
(not reversible)
250 Kg
PM1
Working temperature
weight
Protection rating
Opening time 90°
Rod stroke
Force of thrust 1500 N
motor current input 3 A 1 A
-20° C / +55° C
15/25/30 sec
7.5 Kg
IP 55
300/400/600
Loading...