IRREVERSIBLE OPERATOR
FOR SWING GATES
AND DOORS
PM1/SC
WARNING!! Before installing, thoroughly read this manual that is an integral part of the pack
Our products if installed by qualified personnel capable to evaluate risks, comply with norms UNI EN 12453, EN 12445
The CE mark conforms to European directive EEC 89/336 + 92/31 + 93/68 D.L. 04/12/1992 N. 476.
PACKING CONTENTS ............................................................................. |
2 |
VIEW OF TYPICAL AUTOMATION AND NAMES OF COMPONENTS ............. |
3 |
TECHNICAL DATA.................................................................................... |
3 |
DIMENSIONS ......................................................................................... |
4 |
TYPICAL CONNECTION AND CABLE SECTION.......................................... |
4 |
CONSIDERATIONS FOR INSTALLATION................................................... |
5 |
INSTALLATION....................................................................................... |
5-6 |
TROUBLESHOOTING............................................................................... |
7 |
SAFETY PRECAUTIONS .......................................................................... |
8 |
PACKING CONTENTS
1- OPERATOR
1- KIT FASTENING PLATES AND RELATIVE ACCESSORIES
1- UNLOCKING KEY
1- CONDENSER (230Vca)
VIEW OF TYPICAL AUTOMATION AND NAMES OF COMPONENTS
4 |
3 |
2 |
7 |
6 |
1 |
5 |
|
||
|
1 |
|
5
8
Optimal installation
1- |
Operator |
5- |
Internal photocell |
2- |
External photocell |
6- |
Electronic control unit |
3- |
Flashing warning light |
7- Key-switch |
|
4- Antenna |
8- |
Remote control |
TECHNICAL DATA
Max. weight of gate |
|
200 Kg |
|
Max. width of gate |
|
2,50 mt |
|
Motors power supply |
24Vdc |
|
230 Vac |
Motor power |
50 W |
|
200 W |
Motor RPM |
1500 |
|
1400 |
Condenser |
/ |
|
12,5 µF |
Mechanical unlock for emergency manoeuvre |
|
With key |
|
Working temperature |
-20° C / +55° C |
||
weight |
|
6.5 Kg |
|
Protection rating |
|
IP 55 |
|
Opening time 90° |
|
15 sec |
|
Rod stroke |
300/400/500 mm |
||
Force of thrust |
|
1500 N |
|
Motor current input |
3 A |
|
1 A |