Uniden BCI25D User Manual

General Explanation of BCi25D

The BCi25D is an APCO Project 25 Digital Card that enables you
to monitor APCO Project 25 Systems. When the BCi25D card is
installed into either the BC785D or the BC250D, the card
converts digital voice communications into analog. This coversion
allows you to monitor conversations.

Uniden’s P-25 solution allows you to monitor conventional P-25
digital voice, trunked with analog control channel (3600 Baud)
and P-25 digital voice and mixed-mode analog control channel
(3600 Baud) with mixed analog and P-25 digital voice.

Where to Obtain More Information

• Uniden Parts Department
[phone] (Hours are from 7:00 a.m. to 5:00 p.m. Central
Time Monday through Friday.)

• Local Dealer

Information on the Internet

If you have access to the internet, you may want to visit one of
the following websites for additional information:

www.scanner.uniden.com
www.bearcat1.com

1

Precautions for Installing the

APCO P-25 Card

1. Do not touch the APCO P-25 card without first removing the
static electricity from your body. To do this, touch any metal
object to release the static electricity build-up before you
touch the P-25 card.

2. Turn OFF the scanner, before inserting the P-25 card into the
slot.

3. Hold the P-25 card by its edges when inserting it into the slot.

4. Do not touch any of the terminals. The P-25 is a sensitive
electrical device.

5. Do not operate with an open expansion slot door.
This exposes the circuitry to dust and other environmental
particles that causes the unit to function improperly.

6. Be sure to install the P-25 card facing up as shown below.

2