PROGRAM BC72 AND BC92
Turn on the Scanner and Set Squelch
1.
Turn Squelch fully counterclockwise.
2.
Press and hold for 2 seconds
turn the scanner on, then turn
Volume clockwise until you hear a
hissing sound.
3. If the scanner is scanning, press
Hold to stop scanning, then turn
Squelch clockwise until the hissing
stops.
Store Known Frequencies in Channels
1. Press Hold. Then enter the channel
number where you want to store a
frequency. Then press Func. and
Pgm. The channel number appears.
to
2. Use the number keys and enter the
frequency (including decimal point)
you want to store.
3. Press E to store the frequency in the
channel.
4. To program the next channel in
sequence, press E and repeat Steps
2 and 3.
1.800.272.7111 • www.racingelectronics.com
Loading...