Trendnet TV-IP522P User Manual

Quick Installation Guide

TV-IP522P

1.01

Table of Contents

English 1

1. Before You Start

2. Hardware Installation and Configuration 2
Power over Ethernet (PoE) Installation

3. 7

Troubleshooting 8

1

Version 01.13.2010

1. Before You Start

Package Contents

TV-IP522P

?
?CD-ROM (Utilitly & User’s Guide)
?Multi-Language Quick Installation Guide
?Cat.5 Ethernet Cable (1.5m/ 5ft)
?Mounting Kit
?Power Adapter (12V DC, 1.5A)

System Requirements

10/100Mbps Ethernet Adapter

?

?CD-ROM Drive
?CPU: 2GHz processor or above
?Memory: 1GB RAM or above (Windows 7) / 512MB RAM or above

(Windows Vista) /256MB RAM or above (Windows XP / 2000)

?Windows 7 / Vista / XP /2000
?VGA Resolution: 800 x 600 or above
?Web Browser: Internet Explorer (6.0 or higher)
?Router
?An available DHCP Server – routers usually have a built-in DHCP server
?Power over Ethernet (PoE) Switch (e.g. TPE-80WS) (Optional)
?Power over Ethernet Injector (e.g TPE-111GI ) (Optional)

Note: The TV-IP522P only works with Power over Ethernet (PoE) devices
that follow the IEEE 802.3af standard.

1

2. Hardware Installation and Configuration

Note:

1. It is recommended that you configure the IP Camera from a wired computer.

2. If you would like to use the IPViewPro 2.0 software, please install the software by
clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's
Guide on the

CD for more information.

1. Insert the Utility CD-ROM into your CD-ROM
drive.

2. Click Run autorun.exe (Windows 7/Vista only)

3. Click Setup Wizard.

4. Follow the SetupWizard instructions and then
click Next.

2

5. Click Close.

6. Double click on the SetupWizard icon on your

desktop.

7. Connect a RJ-45 network cable from a
Switch/Router to the Ethernet port on the IP
Camera.

8. Connect the AC Power Adapter to the IP
Camera and then to a power outlet.

9. Click Next.

10. Select the IP camera and click Next.

3

11. Enter your ID and password. Then click Next.

By default:

ID: admin
Password: admin

12. Configure your Camera Name, Camera Time

and Camera Date and then click Next.

13. If you would like to change the administrator

password, click Change Password, enter a
new password, retype the new password and
then click Next.

14. Select DHCP and then click Next.

15. Click Next.

4

16. Please wait while the settings on your

cameras are being saved.

17. Click on the following URL or click Link to

open up the browser configuration.

18. Enter the User Name and password and then

click OK. By default:

User name: admin

Password: admin

Note: User name and Password is case
sensitive.

19. Right click on the yellow bar and select Install

ActiveX Control.

20. Click Install.

5

21. Right click on the yellow bar and select Run

ActiveX Control.

22. Click Run.

23. Live video will now appear.

24. Use the command icons to control the camera.

Your Installation is complete

For detailed information regarding the TV-IP522P’s configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website
at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register

Thank you for choosing TRENDnet

6

3. Power over Ethernet (PoE) Installation

Using the TV-IP522P with a PoE switch

1. Connect a RJ-45 cable from the Power Over

Ethernet switch (e.g. TPE-80WS) to the LAN
port on the Internet Camera Server.

2. Verify that the LEDs are on.

Using the TV-IP522P with an Injector (TPE-111GI)

1. Connect the Power Cord to the Injector. Then

connect the Power Cord to an outlet.

2. Connect a CAT-5e/6 cable from a switch to the
TPE-111GI's DATA IN port.

3. Connect a CAT-5e/6 cable from the TV-IP522P
to the TPE-111GI's DATA OUT port

4. Verify that the LEDs are on.

7

Troubleshooting

1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu
does not appear automatically. What should I do?

1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon
on the bottom left hand corner of the screen, click the “Search programs and files” box, and type
D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and
then press the ENTER key on your keyboard.

2.For Windows Vista, if the installation menu does not appear automatically, click Start, click the
Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to
your CD-ROM Drive, and then press the ENTER key on your keyboard.

3. For Windows XP/2000, if the window does not appear automatically, click Start, click Run and
type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive,
and then press the ENTER key on your keyboard.

2. SetupWizard is unable to detect my camera. What should I do?

1. Verify that you have followed all the steps in the Section 2: Hardware Installation and
Configuration.

2. Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are
using Windows XP or Windows Vista, disable the built in firewall.

3. Click on Rescan in the SetupWizard.

3. I do not have a DHCP server or DHCP is disabled on my network and I am unable to
configure the TV-IP522P. What should I do?

1. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's
network adapter in the subnet of 192.168.10.x. Since the default IP address of the TV-IP522P is

192.168.10.30, do not assign a static IP address of 192.168.10.30 on your computer's network
adapter.

2. Open Internet Explorer and enter into the address bar.

4. The Image is blurry. How can I adjust the focus on the IP Camera?

Adjust the aperture control (middle part of the lens) left
and right, then adjust the focus control (front part of the
lens) left or right.

http://192.168.10.30

5. Live video does not appear when I click on Live View. What should I do?

1. Make sure that you are using a browser that supports ActiveX.

2. Make sure that you added the ActiveX components. See steps 19 to 22 in Section 2: Hardware

Installation and Configuration.

6. I forgot my password. What should I do?

1. Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds. This
will return settings back to factory defaults.

2. Open up the SetupWizard program to find out the IP address of the camera (see step 10 in
Section 2: Hardware Installation and Configuration. If you do not have a DHCP server on
your network, the default IP address is 192.168.10.30. The default administrator ID and
password is admin.

If you still encounter problems or have any questions regarding the TV-IP522P, please contact
TRENDnet's Technical Support Department.

8

GPL/LGPL General Information

This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU
General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT
WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these
codes. The details of the GNU GPL and LGPL are included in the product CD-ROM.
Please also go to (http://www.gnu.org/licenses/gpl.txt) or (http://www.gnu.org/licenses/lgpl.txt) for specific terms of each
license.
The source codes are available for download from TRENDnet's web site (http://trendnet.com/downloads/list_gpl.asp) for at
least three years from the product shipping date.
You could also request the source codes by contacting TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone] Fax: [phone]

Informations générales GPL/LGPL
Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General
Public License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence
publique générale limitée GNU). Ces codes sont distribués SANS GARANTIE et sont sujets aux droits d'auteurs des
programmeurs. TRENDnet ne fournit pas d'assistance technique pour ces codes. Les détails concernant les GPL et LGPL
GNU sont repris sur le CD-ROM du produit.
Veuillez également vous rendre en (http://www.gnu.org/licenses/gpl.txt) ou en (http://www.gnu.org/licenses/lgpl.txt) pour les
conditions spécifiques de chaque licence.
Les codes source sont disponibles au téléchargement sur le site Internet de TRENDnet web site
(http://trendnet.com/downloads/list_gpl.asp) durant au moins 3 ans à partir de la date d'expédition du produit.
Vous pouvez également demander les codes source en contactant TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone] Fax: [phone]

Allgemeine Informationen zu GPL/LGPL

Dieses Produkt enthält die freie Software "netfilter/iptables" (© 2000-2004 netfilter project http://www.netfilter.org) und die
freie Software „Linux „mtd“ (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in
Linux Version 2.4.0-test 3 v. 10.07.2000 (http://www.kernel.org/pub/linux/kernel/v2.4/old-test-kernels/linux-2.4.0-test3.tar.bz2),
sowie weitere freie Software. Sie haben durch den Erwerb dieses Produktes keinerlei Gewährleistungsansprüche gegen die
Berechtigten an der oben genannten Software erworben; weil diese die Software kostenfrei lizenzieren gewähren sie keine
Haftung gemäß unten abgedruckten Lizenzbedingungen. Die Software darf von jedermann im Quell-und Objektcode unter
Beachtung der Lizenzbedingungen der GNU General Public License Version 2, und GNU Lesser General Public License
(LGPL) vervielfältigt, verbreitet und verarbeitet werden. Die Lizenz ist unten im englischsprachigen Originalwortlaut
wiedergegeben. Eine nichtoffizielle Übersetzung in die deutsche Sprache finden Sie im Internet unter
(http://www.gnu.de/documents/gpl-2.0.de.html). Eine allgemeine öffentliche GNU Lizenz befindet sich auch auf der
mitgelieferten CD-ROM.
Sie können Quell-und Objektcode der Software für mindestens drei Jahre auf unserer Homepage www.trendnet.com im
Downloadbereich (http://trendnet.com/langen/downloads/list_gpl.asp) downloadend. Sofern Sie nicht über die Möglichkeit
des Downloads verfügen können Sie bei TRENDnet.
20675 Manhattan Place, Torrance, CA 90501 -U.S.A -, Tel.: [phone], Fax: [phone] die Software anfordern.

Información general sobre la GPL/LGPL
Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la
Licencia pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son
distribuidos SIN GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece
servicio técnico para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del
producto.
Consulte también el (http://www.gnu.org/licenses/gpl.txt) ó el (http://www.gnu.org/licenses/lgpl.txt) para ver las cláusulas
específicas de cada licencia.
Los códigos fuentes están disponibles para ser descargados del sitio Web de TRENDnet
(http://trendnet.com/downloads/list_gpl.asp) durante por lo menos tres años a partir de la fecha de envío del producto.
También puede solicitar el código fuente llamando a TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone] Fax: [phone]

Общая информация о лицензиях GPL/LGPL

В состав данного продукта TRENDnet входит бесплатное программное обеспечение, написанное сторонними
разработчиками. Это ПО распространяется на условиях лицензий GNU General Public License ("GPL") или GNU
Lesser General Public License ("LGPL"). Программы распространяются БЕЗ ГАРАНТИИ и охраняются авторскими
правами разработчиков. TRENDnet не оказывает техническую поддержку этого программного обеспечения.
Подробное описание лицензий GNU GPL и LGPL можно найти на компакт-диске, прилагаемом к продукту.
В пунктах (http://www.gnu.org/licenses/gpl.txt) è (http://www.gnu.org/licenses/lgpl.txt) изложены конкретные условия
каждой из лицензий.
Исходный код программ доступен для загрузки с веб-сайта TRENDnet (http://trendnet.com/downloads/list_gpl.asp) в
течение, как минимум, трех лет со дня поставки продукта.
Кроме того, исходный код можно запросить по адресу TRENDnet.

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone] Fax: [phone]

GPL/LGPL informações Gerais
Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU
General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA
e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os
detalhes do GNU GPL e do LGPL estão no CD-ROM do produto.
Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.org/licenses/lgpl.txt para os termos específicos de cada
licença.
Os códigos fonte estão disponíveis para download no site da TRENDnet (http://trendnet.com/langen/downloads/list_gpl.asp)
por pelo menos três anos da data de embarque do produto.
Você também pode solicitar os códigos fonte contactando TRENDnet, 20675 Manhattan Place, Torrance, CA 90501,
USA.Tel: [phone], Fax: [phone].

GPL/LGPL üldinformatsioon

See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General
Public License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik
Litsentsiga. Koode vahendatakse ILMA GARANTIITA ja need on allutatud arendajate poolt. TRENDnet ei anna koodidele
tehnilist tuge. Detailsemat infot GNU GPL ja LGPL kohta leiate toote CD-ROMil. Infot mõlema litsentsi spetsiifiliste terminite
kohta leiate (http://www.gnu.org/licenses/gpl.txt) või (http://www.gnu.org/licenses/lgpl.txt).
Infot mõlema litsentsi spetsiifiliste terminite kohta leiate (http://www.gnu.org/licenses/gpl.txt) või
(http://www.gnu.org/licenses/lgpl.txt). Lähtekoodi on võimalik alla laadida TRENDneti kodulehelt
(http://trendnet.com/langen/downloads/list_gpl.asp) kolme aasta jooksul alates toote kättesaamise kuupäevast.
Samuti võite lähtekoodi paluda TRENDneti'lt, 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone],
Fax: [phone].

Copyright©2010. All Rights Reserved. TRENDnet.