Trendnet TV-IP512P Quick Installation Guide

Quick Installation Guide

TV-IP512P

1.31

Table of Contents

English 1

1. Before You Start

2. Hardware Installation and Configuration 2

3. Power over Ethernet (PoE) Installaion 7

Troubleshooting 9

1

Version 02.08 .2010

1. Before You Start

Package Contents

?

TV-IP512P

? Utility CD-ROM
? Multi-Language Quick Installation Guide

?

RJ-45 Cable

? Mounting Kit
? AC Power Adapter (12V, 1.5A)

System Requirements

10/100Mbps Ethernet Adapter

?
? CD-ROM Drive

CPU: 2GHz processor or above

?

Memory: 256MB RAM or above / 512MB RAM or above (Windows Vista)

?

Windows 7 2000

?(32/64-bits) / Vista(32/64-bits) / XP(32/64-bits) /

VGA Resolution: 800 x 600 or above

?

Web Brower: Internet Explorer (6.0 or higher)

?

Router

?
? An available DHCP Server –routers usually have a built-in DHCP server.
? Power over Ethernet (PoE) Switch (e.g. TPE-S88)(Optional)
? Injector (e.g TPE-101I )(Optional)

Note: The TV-IP512P only works with Power over Ethernet (PoE) devices that follow the
IEEE 802.3af standard.

1

2. Hardware Installation and Configuration

Note:

1. It is recommended that you configure the IP Camera from a wired computer.

2. If you would like to use IPViewPro 2.0 software, please install the software by clicking
the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the
CD for more information.

1. Insert the Utility CD-ROM into your CD-ROM
drive.

2. Click Run Setup.exe (Windows 7/Vista only).

3. Click Setup Wizard.

4. Follow the SetupWizard instructions and then
click Next.

2

5. Click Close.

6. Double click on the SetupWizard icon on your

desktop.

7. Connect a RJ-45 network cable from a

Switch/Router to the Ethernet port on the IP
Camera.

8. Connect the AC Power Adapter to the IP
Camera and then to a power outlet.

9. Click Next.

10. Select the IP camera and click Next.

3

11. Enter your ID and password. Then click Next.

By default:

ID: admin
Password: admin

12. If you would like to change the administrator

password, click Change Password, enter a
new password, retype the new password and
then click Next.

13. Select DHCP and then click Next.

14. Configure your Camera Name, Camera Time

and Camera Date and then click Next.

15. Click Next.

4

16. Please wait while the settings on your

cameras are being saved.

17. Click on the following URL or click Link to

open up the browser configuration.

18. Right click on the yellow bar and select Install

ActiveX Control.

19. Click Install.

20. Right click on the yellow bar and select Install

ActiveX Control.

5

21. Click Run.

26. Live Video will now appear.

27. Use the command icons to control the camera.

Your installation is now complete

For detailed information regarding the TV-IP512P configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register

Thank you for choosing TRENDnet

6

3. Power over Ethernet (PoE) Installation

Using the TV-IP512P with a PoE switch

1. Connect a RJ-45 cable from the Power Over

Ethernet switch (e.g. TPE-80WS) to the LAN
port on the Internet Camera Server.

2. Verify that the LEDs are on. Please refer to step
4 in the Hardware Installation section.

7

Using the TV-IP512P with an Injector (TPE-111GI)

1. Connect the Power Cord to the

Injector. Then connect the Power

Cord to an outlet.

2. Connect a CAT-5e/6 cable from a

switch to the TPE-111GI's DATA IN
port.

3. Connect a CAT-5e/6 cable from the

TV-IP512P to the TPE-111GI's

DATA OUT port

4. Verify that the LEDs are on.

8

Troubleshooting

I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu

1.
does not appear automatically. What should I do?

For Windows 7, if the installation menu does not appear automatically, click on the

1.
Windows Icon on the bottom left hand corner of the screen,, click the “Search programs
and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter
assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard

2. For Windows Vista, if the installation menu does not appear automatically, click Start, click
the Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter
assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.

3. For Windows XP/2000, if the window does not appear automatically, click Start, click Run
and type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your CD­ROM Drive, and then press the ENTER key on your keyboard.

2. Setup Wizard is unable to detect my camera. What should I do?

Verify that you have followed all the steps in the Section 2: Hardware Installation and

1.
Configuration.

2. Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If
you are using Windows 7, Vista or XP disable the built in firewall.

3. Click on Rescan in the SetupWizard.

3. I do not have a DHCP server or DHCP is disabled on my network and I am unable to
configure the TV-IP512P. What should I do?

1. Go to the TCP/IP settings on your computer and assign a static IP address on your
computer's network adapter in the subnet of 192.168.10.x. Since the default IP address
of the TV-IP512P is 192.168.10.30, do not assign a static IP address of 192.168.10.30 on
your computer's network adapter.

2. Open Internet Explorer and enter http://192.168.10.30 into the address bar.

4. The Image is blurry. How can I adjust the focus on the IP Camera?

You can adjust the IP Camera's focus by rotating the lens.

5. Live video does not appear when I click on Live View. What should I do?

1. Make sure that you are using a browser that supports ActiveX.

2. Make sure that you added ActiveX. See steps 18 to 21 in Section 2: Hardware

Installation and Configuration.

6. I forgot my password. What should I do?

1. Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults.

2. Open up the SetupWizard program to find out the IP address of the camera (see step 10 in
Section 2: Hardware Installation and Configuration. If you do not have a DHCP server
on your network, the default IP address is 192.168.10.30. The default administrator ID
and password is admin.

If you still encounter problems or have any questions regarding the TV-IP512P, please contact
TRENDnet's Technical Support Department.

9

Copyright ©2010. All Rights Reserved. TRENDnet.