Page 1
Quick Installation Guide
TV-IP501P
TV-IP501W
1.01
Page 2
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. Hardware Installation and Configuration .............................................
3. Power over Ethernet (PoE) Installation (TV-IP501P only) ..................
Troubleshooting .........................................................................................
.................................................................................
1
1
3
10
12
Version 07.08.2009
Page 3
1. Before You Start
Package Contents
TV-IP501P/TV-IP501W
?
?CD-ROM (Utility & User's Guide)
?Multi-Language Quick Installation
Guide
?Cat. 5 Ethernet cable (3m/ 9.8ft.)
?Power adapter (5V, 2.5A)
?Camera mounting Kit
System Requirements
10/100Mbps Ethernet Adapter
?
?CD-ROM Drive
CPU: 2GHz processor or above
?
Memory: 256MB RAM or above / 512MB RAM or above (Windows Vista)
?
Windows XP/Vista
?
VGA Resolution: 800 x 600 or above
?
Web Brower: Internet Explorer (6.0 or higher)
?
?Wireless router or access point (TV-IP501W)
?An available DHCP Server –routers usually have a built-in DHCP server.
?Power over Ethernet (PoE) Switch (e.g. TPE-S80WS) (TV-IP501P only)
(Optional)
?Injector (e.g TPE-111GI) (TV-IP501P only) (Optional)
1
English
Page 4
Application
ProView Internet Camera
(TV-IP501P)
Power + Data (PoE)Power + Data (PoE)
24-Port 10/100Mbps Web Smart PoE switch
with 4 Gigabit Ports and 2 Mini-GBIC Slots
(TPE-224WS)
ProView Wireless Internet Camera
(TV-IP501W)
Internet
300Mbps Wireless N
ADSL2/2+ Modem Router
(TEW-635BRM)
ProView Wireless Internet Camera
(TV-IP501W)
ProView Wireless Internet Camera
(TV-IP501W)
Internet
300Mbps Wireless N
ADSL2/2+ Modem Router
(TEW-635BRM)
24-Port 10/100Mbps Web Smart PoE switch
with 4 Gigabit Ports and 2 Mini-GBIC Slots
(TPE-224WS)
Power + Data (PoE)
ProView Internet Camera
(TV-IP501P)
2
English
Power + Data (PoE)
ProView Internet Camera
(TV-IP501P)
Page 5
2. Hardware Installation and Configuration
Note:
1. It is recommended that you configure the IP Camera from a wired computer.
2. If you would like to use IPViewPro 2.0 software, please install the software
by clicking the Install IPView Pro 2.0 in the Autorun window and refer to the
User's Guide on the CD for more information.
1. Insert the Utility CD-ROM into your
CD-ROM drive.
2. Click Run autorun.exe
(Windows Vista only)
3. Click Setup Wizard.
4. Click Next. Then follow the Setup
Wizard instructions.
English
3
Page 6
5. Click Close.
6. Double click on the SetupWizard
icon on your desktop.
7. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port on the IP Camera.
8. Connect the AC Power Adapter to
the IP Camera and then to a power
outlet.
9. Click Next.
10. Select the IP camera and click
Next.
4
English
Page 7
11. Enter your ID and password.
Then click Next. By default:
ID: admin
Password: admin
12. Configure the Camera Name and
Camera Time. Then click Next.
13. If you would like to change the
administrator password, click
Change Password, enter a new
password, retype the new
password and then click Next.
14. Select DHCP and then click Next.
5
English
Page 8
Note: If you have the TV-IP501P, please skip to step 17. If you have
the TV-IP501W, continue on to step 15.
15. Click I want to use wireless for
the camera and then click Next.
16. Select your wireless network from
the dropdown list. The correct
wireless settings will be
automatically configured. If you
have Encryption enabled, please
enter your Encryption Key. Then
click Next.
17. Click Next.
18. Please wait while the settings on
your cameras are being saved.
English
6
Page 9
Note: If you have the TV-IP501P, please skip to step 22. If you have
the TV-IP501W, continue on to step 19.
19. Select By Using Wireless and
then click Next.
20. Disconnect the RJ-45 cable. Wait
a minute and then click Next.
Note: The TV-IP501W will not work wirelessly until you disconnect the
Ethernet cable from the back of the camera
21. Please wait a minute while the
TV-IP501W connects to your
wireless router or access point.
22. Click on the following URL or click
Link to open up the browser
configuration.
7
English
Page 10
23. Enter the User name and
Password, and then click OK.
By default:
User Name: admin
Password: admin
24. Click View Video | Active X or
View Video | Java.
25. If you clicked on View Video |
Active X, right click on the
Internet Explorer Information Bar
and select Install ActiveX
Control.
26. Click Install.
8
English
Page 11
27. Live video will now appear.
Your installation is now complete.
Note: For detailed information regarding the TV-IP501P/TV-IP501W configuration
and advanced settings, please refer to the Troubleshooting section, User's Guide
on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
9
English
Register Your Product
Page 12
3. Power over Ethernet (PoE) Installation (TV-IP501P only)
Using the TV-IP501P with a PoE switch
1. Connect a RJ-45 cable from the
Power Over Ethernet switch (e.g.
TPE-80WS) to the LAN port on the
Internet Camera Server.
2. Verify that the LEDs are on.
Please refer to step 4 in the
Hardware Installation section.
10
English
Page 13
Using the TV-IP501P with a Injector (TPE-111GI)
1. Connect the Power Cord to the
Injector. Then connect the Power
Cord to an outlet.
2. Connect a CAT-5e/6 cable from a
switch to the TPE-111GI's DATA IN
port.
3. Connect a CAT-5e/6 cable from the
TV-IP501P to the TPE-111GI's
DATA OUT port.
4. Verify that the LEDs are on.
11
English
Page 14
Troubleshooting
Q1:
SetupWizard is unable to detect my camera. What should I do?
A1:
First, verify that you have followed all the steps in the Section 2: Hardware Installation
and Configuration. Second, disable any software firewall programs such as ZoneAlarm or
Norton Internet Security. If you are using Windows XP or Windows Vista, disable the built in
firewall. Third, click on Rescan in the SetupWizard.
Q2:
I do not have a DHCP server or DHCP is disabled on my network and I am unable to
configure the TV-IP501P/TV-IP501W. What should I do?
A2:
First, go to the TCP/IP settings on your computer and assign a static IP address on your
computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of
the TV-IP501P/TV-IP501W is 192.168.10.30, do not assign a static IP address of
192.168.10.30 on your computer's network adapter. Second, open Internet Explorer and
enter http://192.168.10.30 into the address bar. See the instructions below:
Windows Vista
1. Go into the Control Panel, click Network and
Internet, click Network and Sharing Center, click
Manage Network Connections and then right-click
the Local Area Connection icon and then click
Properties.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on
Use the following IP address, and make
sure you assign your network adapter an IP
address in the subnet of 192.168.10.x.
Windows XP/ 2000
1. Go into the Control Panel, double-click the Network
Connections icon and then right-click the Local Area
Connection icon and then click Properties.
12
Page 15
2. Click Internet Protocol (TCP/IP) and then
click Properties. Then click on Use the
following IP address, and make sure you
assign your network adapter an IP address in
the subnet of 192.168.10.x.
The Image is blurry. How can I adjust the focus on the IP Camera?
Q3:
Q4:
not load. What should I do?
Q5:
Q6:
can not connect to the camera.
Q7:
You can adjust the IP Camera's focus by rotating the lens.
A3:
When I click on View Image | ActiveX mode or View Image | Java Mode, the image does
First, make sure that you are using a browser that supports ActiveX or Java. Second,
A4:
make sure that ActiveX or Java is installed and enabled.
How do I connect the TV-IP501W to my wireless router or access point?
Make sure that you configure the camera to have the same SSID, encryption mode and
A5:
key (if enabled). Follow the instructions in section 2: Hardware Installation and
Configuration to configure the camera with the SSID and encryption key.
After I successfully configured the TV-IP501W to match my wireless network settings, I
First, verify that the wireless settings match your wireless network settings. Second,
A6:
make sure to disconnect the Ethernet cable from the camera and verify that the LNK LED is
blinking red.
I forgot my password. What should I do?
Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
A7:
This will return settings back to factory defaults. Open up the SetupWizard program to find
out the IP address of the camera (see step 11 in Section 2: Configure the IP Camera. If
you do not have a DHCP server on your network, the default IP address is 192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP501P/TV-IP501W, please
contact TRENDnet's Technical Support Department.
13
Page 16
Page 17
Page 18
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Page 19
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2009. All Rights Reserved. TRENDnet.
Loading...