Page 1
Quick Installation Guide
TV-IP201P
Page 2
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. Hardware Installation ........................................................................
3. Configure the Internet Camera ..........................................................
4. Power over Ethernet (PoE) Installation .............................................
Troubleshooting ........................................................................................
.................................................................................
1
1
2
3
7
9
Version 06.08.2007
Page 3
1. Before You Start
System Requirements
CPU: 1.1GHz or above
?
Memory: 256MB or above / 512MB RAM or above (Windows Vista)
?
VGA resolution: 800 x 600 or above
?
Web Browser: Internet Explorer (5.0 or higher) or FireFox
?
A network Switch or Hub with an available network LAN port.
?
A RJ-45 network cable.
?
Power over Ethernet (PoE) Switch (e.g. TPE-S88)(Optional)
?
Injector (e.g TPE-101I )(Optional)
?
Application
Package Contents
TV-IP201P
?
Quick Installation Guide
?
Utility CD-ROM?
Metal Stand
?
? AC Power Adapter (5V, 2.5A)
PoE Internet Camera Server
with Audio (TV-IP201P)
Power + Data
(PoE)
Power over Ethernet
(PoE) Injector
(TPE-101I)
Power
Data
Power
Jack
16-Port 10/100Mbps Fast
Ethernet Switch (TE100-S16)
Power Data Data + Power
Internet
Data
Data Data
1
English
Router/Modem
Workstation
Power + Data
(PoE)
16-Port 10/100Mbps Web Smart
PoE Switch (TPE-S88)
Page 4
2. Hardware Installation
1. Mount the Internet Camera to the
metal stand.
2. Connect a RJ-45 network cable
from a Switch/Router to the
LAN port of the Internet Camera.
3. Connect the AC Power Adapter to
the Internet Camera and then to a
power outlet.
4. Verify that the Power and Link
lights are on.
2
English
Page 5
3. Configure the Internet Camera
Note: Since the Internet Camera's default IP address is 192.168.0.30, make
sure no other network devices are assigned an IP address of 192.168.0.30
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click
Setup Wizard.
2. Follow the InstallShield Wizard
instructions and then click Finish.
3. Go to Start -> Programs -> Setup
Wizard and click SetupWizard.
4. Select the camera and then click
Wizard.
English
3
Page 6
5. Click Yes.
6. Enter the Admin ID and Password,
and then click OK. By default:
User Name: admin
Password: admin
7. If your network is on a different
subnet, an IP address in your
network's subnet will automatically
be generated. If this IP address is
not used by another device in your
network, click OK.
4
English
Page 7
8. Enter the Admin ID and Password,
and then click OK. By default:
Admin ID: admin
Password: admin
If you like to change the Admin ID
and password, click Change, enter
the New ID and the New Password
and confirm the New ID and News
Password. Click on the right arrow
to continue.
9. Click on the right arrow.
10. Copy down the IP Address and
then click the restart button.
English
5
Page 8
11. Open your web browser, type in
the IP address of the camera in
the Address bar, and then press
Enter. If you changed the IP
address of the camera, type in the
new IP address. By default, the IP
address is 192.168.0.30
12. Click View Image – Active X
Mode or View Image – Java
Mode.
13. Enter the Admin ID and
Password, and then click OK.
By default:
Admin ID: admin
Password: admin
Your installation is now complete.
Note: For detailed information regarding the TV-IP201P configuration and
advanced settings, please refer to the Troubleshooting section, User’s Guide
on the Utility CD-ROM, or TRENDnet’s website at http://www.trendnet.com.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
6
English
Page 9
4. Power over Ethernet (PoE) Installation
Using the TV-IP201P with a PoE switch
1. Connect a RJ-45 cable from the
Power over Ethernet Switch to the
LAN port of the Internet Camera
Server.
2. Verify that the LEDs are on.
Please refer to step 4 in the
Hardware Installation section.
7
English
Page 10
Using the TV-IP201P with an Injector (TPE-101I)
1. Connect the Power Cord to the
Injector. Then connect the Power
Cord to an outlet.
2. Connect a CAT-5 cable from a
switch to the TPE-101I's Data In
port.
3. Connect a CAT-5 cable from the
TV-IP201P's LAN port to the
Injector's PoE OUT port
4. Verify that the LEDs are on.
8
English
Page 11
Troubleshooting
The setup wizard is unable to detect my camera. What should I do?
Q1:
First, verify that you have followed all the steps in the Hardware Installation
A1:
section (Section 2). Second, disable any software firewall programs such as
ZoneAlarm or Norton Internet Security. If you are using Windows XP or Windows
Vista, disable the built in firewall. Third, click on Search in the setup wizard.
The Image is blurry. How can I adjust the focus on the Internet camera?
Q2:
You can adjust the Internet Camera's focus by rotating the lens.
A2:
When I click on View Image – Active X mode or View Image – Java Mode, the
Q3:
image does not load. What should I do.
First, make sure that you are using a browser that supports Active X or Java.
A3:
Second, make sure that Active X or Java is installed and enabled.
The TV-IP201P does not power on when I plug the device into a Power over
Q4:
Ethernet switch or splitter. What should I do?
First, verify that the PoE device supports IEEE 802.3af protocol. Second,
A4:
verify that the TV-IP201P powers up using the provided 5V, 2.5A power adapter.
Third, power cycle the PoE switch or splitter. Fourth, unplug power to the
switch or splitter, wait 15 seconds, then plug the power back in. Fifth, plug the
device into a different port on the PoE switch. Sixth, try using another Cat-5e
cable.
If you still encounter problems or have any questions regarding the TV-IP201P, please
contact TRENDnet's Technical Support Department.
9
Page 12
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Page 13
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
. . . . .
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2007. All Rights Reserved. TRENDnet.
Loading...