TP-Link TL-WN725N Installation Guide

Quick Installation Guide
1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network
150Mbps Wireless N Nano
USB Adapter
MODEL NO. TL-WN725N
For Mac OS X
Insert the adapter into a USB port on your computer directly.
a. Download the driver and utility from this
product’s Support page at www.tp-link.com.
Note: If your computer has a CD drive, you can also run the included CD to install the driver and utility.
b. Unzip the downloaded folder and run the
Install.pkg.
installation.
SHELL
Uninstall.commandInstall.pkg
a. Click (TP-Link Utility) on the menu
bar.
b. Select your Wi-Fi network and enter the
Wi-Fi password when prompted.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-Link_XXXX
TP-Link_0903
0210
TP-Link_
TP-Link_0001
Join Other Network...
WPS...
Open Wireless Utility...
Connections are available
Wireless Network Connection
7106507574 REV5.1.0
For Windows
1 Connect to a Computer
Insert the adapter into a USB port on your computer directly.
Note: In Windows XP or Windows Vista, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
a. Insert the CD and run the Autorun.exe.
Note: You can also download the driver from this product’s Support page at www.tp-link.com.
b. Select TL-WN725N and follow the
instructions to complete the installation.
Note: If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.
TL-WN725N
3 Join a Wireless Network2 Install Driver
a. Click the network icon ( or ) on the
taskbar.
b. Select your Wi-Fi network, click Connect
and enter the password when prompted.
TP-Link_XXXX
Connect automatically
Connect
For detailed instructions, please refer to the User Manual from this product’s Support page at www.tp-link.com.
For technical support and other information, please visit http://www.tp-link.com/support, or simply scan the QR code.
This USB Adapter can only be powered by computers that comply with Limited Power Source (LPS).
©2017 TP-Link
Loading...