TP-Link TL-PS310U Quick Installation Guide

Before you start, you should prepare the following items

¾ Windows 2000/XP/Vista/7 computer with print server setup CD

¾ One USB device with USB port

Hardware Installation

1. Turn off the USB device’s power.

2. Connect your USB device to the TL-PS310U.

3. Connect the TL-PS310U to the router or switch/HUB with the Ethernet cable.

4. Connect the power adapter to the TL-PS310U. When the Link LED lights up,
the TL-PS310U is correctly connected to the network.

Factory Default Settings

¾ IP address: 192.168.0.10/255.255.255.0

¾ Password: the TL-PS310U does not come with a default password.

1

r

Insert the setup CD into you

CD-drive. The auto-run program
will be started.

Select TL-PS310U

Choose your operating system to

install all software programs.

When the installation completed,

please DO restart your computer.

Restart your computer

2

On your desktop you will see a

new icon, double-click the icon
and it will bring up the MFP and
Storage Server setup utility.

In this screen, you will see the product listed as MFP and Storage Server

-XXXXXX (192.168.0.10). If your computer is not in the 192.168.0.x network
segment, it’ll tell you that the TL-PS310U is in different network segment. In this
situation, you need to change the IP of the TL-PS310U.

Select the print server,
right-click on it and select
Server Configurations

3

Configure the IP address of
the print server according to
your network. And then click
Set

Open the above Server Configuration screen again and click Restart Server,

so that you can apply the IP configuration.

The IP address has been
changed

4

The MFP and Storage Server will auto-detect the USB device connecting to the USB
port of the TL-PS310U.

Connecting to an USB Printer

Select the USB printer you
want to connect and click
Connect Device

Because the “Disconnect Printer
when Idle” option is enabled by
default, the server will tell you
this. Just click OK

You can disable the “Disconnect Printer when Idle” in the Option menu.

The windows will detect
the printer and install its
driver automatically

5

After the driver is installed,
the printer will be in your
system

After finish installing the printer driver, please disconnect the printer manually.
And then right-click the printer icon, you can use the “Connect Automatically

for Printing” function. You’re highly recommended to use this function for
printing.

Enable the “Connect Automatically
for Printing” function

6

Connecting to an USB Drive

It’s the same as you connect the printer on the MFP and Storage Server.

Select the USB drive you
want to connect and click
Connect Device

After the driver is installed,
the Removable Disk will be
in your system

If you connect the USB devices all the time, other users can’t connect and use them.
A recommended habit is disconnecting the USB devices when you don’t use them.

7

Disconnect manually

Select the USB device and
click “Disconnect Device”

Disconnect when Idle

On the top menu, click Options, the
“Disconnect Storage Device When

Idle” and “Disconnect Printer When
Idle” are on the list

8

Technical Support

 For more troubleshooting help, go to:

www.tp-link.com/support/faq.asp

 To download the latest Firmware, Driver, Utility and User Guide, go to:

www.tp-link.com/support/download.asp

 For all other technical support, please contact us by using the following

details:

Global

Tel: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7days a week

Singapore

Tel: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7days a week

Germany / Austria / Switzerland

Tel: [phone] (German
Service)
E-mail: [e-mail]
Service time: GMT+ 1 or
(Daylight Saving Time in Germany)
Except bank holidays in Hesse

GMT+ 2

Australia & New Zealand

Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: [e-mail]
Service time: Monday to Friday
9:00 AM to 9:00 PM AEST

USA/Canada

Toll Free: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7days a week

UK

Tel: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7da

ys a week