The product model shown in this QIG is TL-PS110U, as an example.
Before you start, you should prepare the following items
¾ Windows 2000/XP/2003/Vista/7 computer with print server setup CD
¾ One Printer
¾ One Printer cable
¾ One Router
Hardware Installation
1. Turn off the printer’s power.
2. Connect the print server to
your printer with the supplied
printer cable. Connect the
print server to your Router
with the RJ45 cable. The
image beside is the classic
infrastructure topology for
reference:
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
Factory Default Settings
¾ Username: admin
¾ IP Address: 192.168.0.10
¾ Subnet Mask: 255.255.255.0
Note
The TL-PS110U is produced without password by default.
1
r
1
Insert the provided CD into you
computer’s CD dirve, the Setup
Wizard will automatically pop up
on your computer’s screen.
Select TL-PS110U
Note
Click Setup Wizard
Configuring the Printer Server
Select the Print Server
If you don’t have a CD-ROM, you can click to our web site
(http://www.tplink.com/support/download.asp) and download the
PrintServer_Setup_Wizard.
2
r
Click Next
On the Select A Print Serve
screen, TL-PS110U will be detected
as “1P_PrintServXXX”.
Select the print server
Click Next
Configure the Print Server
Please select Yes. Leave
the Password blank
Click Next
3
Assign a static IP to your Print
Server. The IP should be within
the same subnet of your Router
Click Next
The IP address of the print server must be within the same subnet with your
Note
Router, for example:
Network device IP address
Router/Gateway 192.168.1.1
Print server 192.168.1.10
Remember the IP address of the Print Server, because you may log into the
Note
Print Server by this IP next time.
Confirm the settings
Click Next
4
pr
PSWizard is saving theconfigurations
int server
to the
Click Next
5
p
2
This page will then display.
If your printer has already appeared in
the Printer Name list, please follow
the instruction
follow the instruction
Select an existing printer
by the printer name
Configuring the Printer
. Otherwise please
Click Next, and then follow
the step by step instructions
to com
lete the installation
You have now installed the print server and the printer successfully. You can print
through the network.
The print server needs to be configured only once, other users who want to
Note
share the printer only need to install the printer’s driver and configure the
TCP/IP port on their computers. Please refer to the User Guide on the
resource CD.
6
Click Add New Printer
Click Next
Select Local printer attached to this computer
Click Next
7
y
Tick Use the following port and
select LPT1: (Recommended Printer Port) from the pull-down
list
Click Next
Select the manufacturer and
model of
Click Next
Note
Enter a name for your printer
our printer
If you already have the printer’s driver installed, you will be asked whether to
keep or replace it. Please select replace it.
Click Next
8
Select No
Click Next
Click Next, and then follow
the step by step instructions
to complete the installation
You have now installed the print server and the printer successfully. You can print
through the network.
The print server needs to be configured only once, other users who want to
Note
share the printer only need to install the driver of the printer and configure
the TCP/IP port on their computers. Please refer to the User Guide on the
resource CD.
9
Technical Support
For more troubleshooting help, go to:
www.tp-link.com/support/faq.asp
To download the latest Firmware, Driver, Utility and User Guide, go to:
www.tp-link.com/support/download.asp
For all other technical support, please contact us by using the following
details:
Global
Tel: +86 755 26504400
E-mail: support@tp-link.com
Service time: 24hrs, 7days a week
Singapore
Tel: +65 62840493
E-mail: support.sg@tp-link.com
Service time: 24hrs, 7days a week
Tel: +41 (0)848 800998 (German
service)
E-mail: support.ch@tp-link.com
Fee: 4-8 Rp/min, depending on rate
of different time
Service Time: Monday to Friday
9:00 AM to 6:00 PM. GMT+1 or
GMT+2 (Daylight Saving Time)
ys a week
Australia & New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: support@tp-link.com.au
Service time: Monday to Friday
9:00 AM to 9:00 PM AEST
USA/Canada
Toll Free: +1 866 225 8139
E-mail: support.usa@tp-link.com
Service time: 24hrs, 7days a week
Germany/Austria
Tel: +49 1805 875465 (German
Service) / +49 1805 TPLINK
E-mail: support.de@tp-link.com
Fee: 0.14 EUR/min from the
German fixed phone network and
up to 0.42 EUR/min from mobile
phone.
Service Time: Monday to Friday
9:00 AM to 6:00 PM. GMT+1 or
GMT+2 (Daylight Saving Time in
Germany)
* Except bank holidays in Hesse
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.