TP-Link TL-POE200A, TL-POE200B User Manual

User Guide

Power over Ethernet Adapter Kit

TL-POE200A (PoE Injector)

TL-POE200B (PoE Splitter)

For more information, please visit our website:

http://www.tp-link.com

Package Contents: TL-POE200 Power over Ethernet Adapter Kit, Ethernet Cable, Female-to-Female Power Connector, DC Power Adapter, User Guide

Connection

Use the Power over Ethernet Adapter Kit to supply power and transmit data to a Non-PoE device.

				Note:
				Set the required voltage
				of the non-PoE device
				before cable connection.
Power Socket	Ethernet Device	PoE Injector	PoE Splitter	Non-PoE Device
	(switch, router, etc.)
				12V 9V 5V
		LAN IN PWR DC 48V	LAN OUT	PWR DC OUT

Note: TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The PoE Injector and PoE Splitter can only be used together. Pairing TL-POE200A or TL-POE200B with any other devices is dangerous.

Power LED Explanation

PoE Injector:

PoE Splitter:

Injector

PoE

Splitter

PoE

LAN IN

PWR DC 48V

LAN OUT

PWR DC OUT

Steady green indicates that the power adapter is working properly.

Steady green indicates the PoE Splitter can supply power.

Specifications

General Specifications

Standards	IEEE 802.3, IEEE802.3i, IEEE 802.3u, CSMA/CD, TCP/IP
Voltage Output	12V, 9V or 5V
Output Power	12V/1.0A, 9V/1.0A, 5V/2.0A
Cable Type	UTP/STP of Cat. 5 or above (based on the standards
	that the connected devices comply with)
Ports	TL-POE200A:
	10/100Mbps Auto-Negotiation RJ45 LAN IN port
	10/100Mbps Auto-Negotiation RJ45 POWER+DATA
	OUT port
	DC 48V Power Input port
	TL-POE200B:
	10/100Mbps Auto-Negotiation RJ45 POWER+DATA IN
	port
	10/100Mbps Auto-Negotiation RJ45 LAN OUT port
	5V/9V/12V DC OUT Power Output port
LED	PWR
Safety & Emissions	FCC, CE

Environmental and Physical Specifications

Operationg Temperature	0˚C to 40˚C (32˚F to 104˚F)
Storage Temperature	-40˚C to 70˚C (-40˚F to 158˚F)
Operationg Humidity	10% to 90%RH non-condensing
Storage Humidity	5% to 90%RH non-condensing

Explanation of the symbols on the product label

DC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

BSMI Notice



	Pb	Cd	Hg	CrVI	PBB	PBDE

PCB	○	○	○	○	○	○

	○	○	○	○	○	○

"○"

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce

FAQ

Q1. Can TL-POE200 Kit be used with a device which doesn’t have a gigabit Ethernet port?

A: Yes. Both the LAN ports and the PoE ports of TL-POE200 Kit comply with IEEE 802.3 and IEEE 802.3u standards and support 10/100Mbps Auto-Negotiation.

Q2. Can TL-POE200 supply power to all my non-PoE devices?

A: If the voltage standard of the devices matches that of TL-POE200 Kit, TL-POE200 Kit can supply power to them. Ensure the Female-to-Female Power Connector matches your non-PoE devices at the same time.

Q3. Must I use the PoE Injector together with its PoE Splitter?

A: Yes. TL-POE200 Kit is not compliant with IEEE 802.3af standard. The PoE

Injector and PoE Splitter can only be used together. Mixed use of different PoE models may be dangerous.

For technical support and other information, please visit

http://www.tp-link.com/support, or simply scan the QR code.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1)This device may not cause harmful interference.

2)This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.