TP-Link TL-POE160S User Manual

PoE+ Injector

MODEL: TL-POE160S Datasheet

Features

• 2 gigabit ports ensure faster transmission

• Complies with IEEE802.3af/at standards, supplies up to 30 W

• Reduces infrastructure costs by transmitting data and power

simultaneously via an Ethernet cable

• Automatically determines and supplies the exact power to meet

the device’s need

• Wall-mounting and desktop design accommodates most

installations scenarios

• Plug & Play installation, requires no conguration

• Integrated power supply

Overview

The PoE+ Injector TL-POE160S fully complies with IEEE 802.3af/at standards, and can work with all

IEEE 802.3af/at PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-Link’s

TL-POE10R, or other equivalent product, to expand your network to where there are no power line or

outlet, where you wish to x device such as AP, IP Camera or IP Phone, etc.

Specications

Product Picture

Model TL-POE160S

Standards IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at

1 10/100/1000Mbps RJ45 data-in port

Ports

Network Media

Basic Function

Power

LED Indicator

1 10/100/1000Mbps RJ45 power+data-out port 1 AC socket

10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m)

EIA/TIA-568 100Ω STP (maximum 100 m)

100BASE-TX: UTP category 5, 5e cable (maximum 100 m)

EIA/TIA-568 100Ω STP (maximum 100 m)

1000BASE-T: UTP category 5, 5e, 6 cable(maximum 100 m)

Auto-Sensing Algorithm enables providing power with 802.3af/at PD Auto-determine the necessary power requirements Wall-mounting and desktop installation supported Plug-and-Play

Input: 100-240 V, 50/60 Hz Output: Auto-determine the necessary power requirements (max. 30 W)

ON: Supplying power normally

Dimensions ( W x D x H ) 4.9*2.3*1.4 in (125*59.4*36.8 mm)

FCC, CE, RoHS

Package Contents TL-POE160S, power cord, RJ45 cable, installation guide, wall-mounting kits

Operating Temperature: 0°C to 40°C (32°F to 104°F)

Environment

Storage Temperature: -40°C to 70°C (-40°F to 158°F) Operating Humidity: 10% to 90%RH non-condensing Storage Humidity: 5% to 90%RH non-condensing

Diagram

Legend:

Data only

Power only

Data & Power

IEEE 802.3af /at Compliant AP

IEEE 802.3af/at

PoE+ Injector TL-POE160S

Compliant IP Camera

Router

PoE+ Injector TL-POE160S

PoE Splitter

Non-PoE Wireless Access Point

www.tp-link.com

Specications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or