Tp-Link TL-PoE150S Product Data Sheet
PoE Injector
TL-POE150S
Features：
Complies with IEEE802.3af standard
Cost Saving, no power cabling for Ethernet
network device
Delivers power and data over the single
cable up to 100 meters
Advanced Auto-Sensing Algorithm
enables providing power with 802.3af PD
Supports power classication,Auto-determine the
necessary power requirements
High Safety with Short Circuit Protection
Plug & Play installation, requires no
conguration
External 48VDC power supply
Description：
TP-LINK’s PoE Injector TL-POE150S fully complies with IEEE 802.3af standard. No need to buy a PoE switch,
you can use the existing non-PoE switch or non-PoE router to connect PoE devices with the help of
TL-POE150S.
The PoE Injector TL-POE150S can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE
Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent products, to expand your network to
where there are no power lines or outlets, where you wish to fix devices like Wireless Access Points, IP Cameras or IP Phones, etc.
www.tp-link.com
PoE Injector
Specifications：
TL-POE150S
Standards
Ports
Network Media
Basic Function
Power
LED Indicator
Safety & Emission
Dimensions (W*D*H)
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af
1 10/100/1000Mbps Auto-Negotiation RJ45 LAN port (LAN IN)
1 10/100/1000Mbps Auto-Negotiation RJ45 PoE port (POWER+DATA OUT)
1 power socket (DC IN)
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100 STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100 STP (maximum 100m)
1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m)
Auto-Sensing Algorithm enables providing power with 802.3af PD
Delivers power and data over the same cable up to 100 meters
Auto-determine the necessary power requirements
Plug-and-Play
Input: External 48VDC power adapter
Output: Auto-determine the necessary power requirements (max. 15.4W)
Power On+No PD Connected(Blend color of red and yellow), Power On+PD Connected(green)
FCC, CE
3.2*2.1*0.9 in.(80.8*54*24 mm)
0°C~40°C (32°F~104°F)
-40°C~70°C (-40°F~158°F)
10%~90% non-condensing
5%~90% non-condensing
Diagram:
Load Balance
Broadband Router
PoE Injector
TL-POE150S
PoE Injector
TL-POE150S
IEEE 802.3af
Compliant AP
IEEE 802.3af
Compliant IP Phone
IEEE 802.3af
Compliant IP Camera
PoE Splitter
Legend:
Data only
Power only
Data & Power
Non-PoE Wireless N
Access Point
Package:
- TL-POE150S PoE Injector
- One Ethernet (CAT.5 UTP) Cable
- One Power Adapter
- User Guide
Related Products:
- Load Balance Broadband Router
TL-R470T+
- 150Mbps Wireless N Access Point
TL-WA701ND
- PoE Splitter
TL-POE10R
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
www.tp-link.com
Loading...