TP-Link TL-POE150S, TL-POE10R, TL-POE160S Installation Guide
Installation Guide
PoE Injector and PoE Splitter
Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
For simplicity, we will take TL-POE150S and TL-POE10R for example throughout the Guide, other models may dier in appearance.
The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE
PoE Injector Only
AP and PoE IP Phone through an Ethernet cable.
PoE InjectorPower Socket Ethernet Device
(switch, router, etc.)
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email techwriter@tp-link.com.cn.
© 2020 TP-Link 7106508857 REV5.1.0
PoE Injector
Powered Device (PD)
PoE Splitter Only
PoE/PoE+ Switch
LAN IN
DC 48V
PWR
IP Camera AP IP Phone
The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE
device.
Non-PoE Device
PoE Splitter
12V 9V 5V
PoE Splitter
Note:
(suggested power:<12 W)
Set the required voltage
of the non-PoE device
LAN OUT
DC OUT
PWR
before cable connection.
PoE Injector & Splitter
Ethernet Device
(switch, router, etc.)
PoE Injector PoE SplitterPower Socket
The PoE injector and PoE splitter can be used as a kit to supply power and transmit data to a Non-PoE
device.
Non-PoE Device
(suggested power:<12 W)
12V 9V 5V
PoE Injector
PoE Splitter
Note:
Set the required voltage
of the non-PoE device
LAN IN
DC 48V
PWR
LAN OUT
DC OUT
PWR
before cable connection.
Power LED Explanation
PoE Injector: PoE Splitter:
PoE Injector
LAN IN
PWR
DC 48V
On: Supplying power normally
Flashing: No PD is connected/Supplying
power abnormally
O: No power supply
PWR
PWR+DATA OUT DATA IN
On: Supplying power normally
O: No power supply
FAQ
Q1. Can the PoE injector supply power to a PoE device which
doesn’t have a gigabit PoE port?
A:
Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps
auto-negotiation.
LAN OUT
On: Connected to PSE correctly
O: No PSE is connected
Specications
General Specifications
Standards
LED
Cable Type
Ports
IEEE 802.3i, IEEE802.3u, IEEE 802.3ab, IEEE 802.3af
IEEE 802.3at (only for TL-POE160S)
PWR
UTP/STP of Cat. 5 or above (based on the standards that the
connected devices comply with)
TL-POE150S:
10/100/1000 Mbps Auto-Negotiation RJ45 LAN IN Port
10/100/1000 Mbps Auto-Negotiation RJ45 POWER+DATA
OUT Port
DC 48 V Power Input Port
TL-POE160S:
10/100/1000 Mbps Auto-Negotiation RJ45 DATA I N Por t
10/100/1000 Mbps Auto-Negotiation RJ45 PWR+DATA
OUT Port
AC 100–240 V 50/60 Hz Power Input Port
PWR
PoE Splitter
DC OUT
Q2. What can I do if my PoE injector doesn’t supply power to
the powered device or the supplied power is unstable?
A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE
function.
A2: For TL-POE150S, ensure the power consumption of the PD doesn’t
exceed 15.4 W; for TL-POE160S, ensure the power consumption of the PD
doesn’t exceed 30 W, otherwise the overload protection of the PoE
injector will be activated. The quality and length of the Ethernet cable may
inuence the reception of the power supply.
Q3. Must I use the PoE injector together with the PoE splitter?
A: No. The PoE injector can supply power to all PDs support PoE function. The
PoE splitter is used with a PoE switch or the PoE injector to supply power to
a non-PoE device.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Do not use any other chargers than those recommended.
Do not use damaged charger or USB cable to charge the device.
Adapter shall be installed near the equipment and shall be easily accessible.
TL-POE10R:
10/100/1000 Mbps Auto-Negotiation RJ45 POWER+DATA
IN Port
10/100/1000 Mbps Auto-Negotiation RJ45 LAN OUT Port
5 V/9 V/12 V DC OUT Power Output Port
Wall
Mountable
TL-POE150S/TL-POE10R: No
TL-POE160S: Yes
Environmental and Physical Specifications
Operating Temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)
Operating Humidity 10% to 90% non-condensing
Storage Humidity 5% to 90% non-condensing
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/ce.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper
use of the device. Please use this product with care and operate at your own
risk.
Loading...