The TP-Link ADSL2/2+ Modem with 54M Wireless Router (TD-W8910G) is a 3-in-1 device that combines the function o f a high-speed DSL modem,
eXtended Range™ wireless G access point, and 4-port Ethernet router. The TD-W8910G supports the latest ADSL2/2+ standards to provide hi gher
performance (up to 24Mbps downstream and 1Mbps upstream) and longer reach from your Internet Service Provider’s (ISP) Digital Subscriber Lin e
Access Multiplexer (DSLAM).
ACCESS HIGH-SPEED INTERNET
Unlike a dial-up Internet service, a DSL Internet connection is always on so that you do not have to wait to access the Web. This device also
supports TR-069, which automatically updates the firmware and other settings when they become available from your ISP.
CONNECT NETWORKING DEVICES – WIRED OR WIRELESS
With the TD-W8910G, you can create a wireless network to connect 802.11g/802.11b devices as well as a wired network to connect up to four
10/100 Ethernet devices. Share your high-speed DSL Internet connection, photos, music, videos, printers, and Network Attached Storage (NAS) with
multiple users. The TD-W8910G includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and
lag-free online gaming. In addition, this device includes Dual Active Firewalls (built-in firewall and NAT) to help protect your network from potential
attacks from across the Internet. To prevent unauthorized wireless access into your network, the TD-W8910G supports the latest encryption including
WEP, WPA, and WPA2.
Whether it is for a home user who wants to share high-speed Internet access or for a small office that needs Internet access for conducting essential
business activities, the ADSL2/2+ Modem with 54M Wireless Router (TD-W8910G) is the ideal all-in-one broadband and wireless networking
solution
.
WHAT THIS PRODUCT DOES
The TP-Link ADSL2/2+ Modem with 54M Wireless Router (TD-W8910G) combines the function of a high-speed DSL modem, eXtended Range ™
wireless G access point, and 4-port router. With automatic scanning and detection of your DSL settings, the TD-W8910G quickly sets up your Internet
connection. Easily create a secure wireless network and share a high-speed Internet connection while allowing access to shared files, music, photos,
and printers with multiple computers.
YOUR NETWORK SETUP
TECHNICAL SPECIFICATIONS
Specifications of TD-W8910G
subitem DESCRIPTION SPECIFICATIONS
PHYSICAL SPECIFICATIONS
1.1
1.2
1.3
WAN interface
LAN interface
Status indicators
4 ethernet port, support 802.3,802.3u
Power,System,ADSL,WLAN,LAN1~4
1 RJ11 port
ELECTRICAL SPECIFICATIONS
2.1
2.2
Output voltage
Power consumption
12VDC, 1.0A
10W
ENVIRONMENT SPECIFICATIONS
3.1
3.2
3.3
Operating temperature
Storage temperature
Relative humidity
Max downstream velocity 24Mbps(with ADSL2+ enabled), Max
upstream velocity 1Mbps
Max 6 kilometers
for speed, bandwidth and latency, sinchronicity and ADSL
activation based on ITU-T G.994.1 (G.hs)
Interoperability with DSLAM equipment that uses G. 992.1
4.5
Interoperability
(G.DMT), G.992.2 (G.Lite), G.992.3(G.dmt.bis), G.992.5 and
G.994.1(G.hs)
ATM SPECIFICATIONS
5.1.1 ATM Forum UNI 3.1
5.1.2 ATM Adaptation Layer Type 5-AAL5
5.1.3 ATM Adaptation Layer Type 0-AAL0
5.1.4
Protocolos ATM
Multiprotocol encapsulation over ATM (RFC 1483)
(bridge&router modes)
5.2.1 Unspecified Bit Rate (UBR)
5.2.2 Constant Bit Rate (CBR)
Service Clases of ATM
5.2.3 Variable Bit Rate with real time(VBR-rt)
5.2.4
5.3
Virtual Circuits
Variable Bit Rate without real time(VBR-nrt)
8PVC
Switching SPECIFICATIONS
6.1
6.2
Qulity of Service(QOS)
IGMP
IP Type of service(ToS), 802.1p
IGMP snooping,IGMP multicast
MANAGEMENT SPECIFICATIONS
7.1.1 Backup settings
7.1.2 Update settings
7.1.3 restore factory default settings
7.1.4 LAN configuration
7.1.5 ADSL configuration
Administrative tools
7.1.6 ATM parameters configuration
7.1.7 Access control
7.1.8 Remote administration configuration
7.1.9
7.2.1
Autodiagnostics
LAN connectivity
7.2.2 CPE Sincronization
7.2.3 ATM conectivity
Diagnostic Tools
7.2.4 PPP conectivity
7.2.5 IP conectivity
7.2.6
7.3
7.4
7.5
7.6
Access control
IP aliasing
Management Interface
Compatibility with management agents
PACKET Internetwork Groper (PING)
Services, IP address, Password
local users can access the device through two IPs
HTTP
CPE WAN Management Protocol (TR69)
7.7 Remote administration Remotely administrable by HTTP
7.8
7.9
7.10
Software upgrade
Authentication
Security management
Administration and operation software (firmware) upgradable
locally by web
Auto,PAP,CHAP,MS-CHAP
IP filterling, MAC filtering, Parental control
ROUTING SPECIFICATIONS
8.1.1 PPP over ATM (RFC 2364)
8.1.2
Protocolos PPP
PPP over Ethernet (RFC 2516)
8.2.1 Clasical IP over ATM (RFC 1577/2225)
8.2.2 Routing Information Protocol- RIP Versión 1(RFC 1058)
8.2.3 Routing Information Protocol -RIP Versión 2 (RFC 1723)
2.400-2.4835GHz
54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, & 1Mbps
Indoor up to100m, Outdoor up to 300m
Complementary Code Keying (CCK)
Wi-Fi Protected Access(WPA), support WPA/WPA-PSK
WPA2/WPA2-PSK
MAC Filtering
17dbm
Omni directional, Detachable, Reverse SMA
3dbm
EN55024
EN 60950
MINIMUM SYSTE M REQUIREMENTS
Subscription with DSL Internet Service Provider
Computer with a Network Interface Card
PACKAGE CONTENTS
One TD-W8910G 54M Wireless ADSL2+ Router
One DC power Adapter for TD-W8910G 54M Wireless ADSL2+ Router
Quick Installation Guide
One RJ45 cable
Two RJ11 cables
One ADSL splitter
One Resource CD for TD-W8910G 54M Wireless ADSL2+ Router, including:
z User Guide
z Other Helpful Information
1. ADSL speeds may vary depending on your individual contract with or services offered by your Internet Service Provider (ISP) and the distance of the modem from the ISP’s DSLAM.
2. Latest software and documentation are available at http://www.tp-link.com.
3. All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, actual product appearance may differ than that depicted herein.
Specifications are subject to change without notice.
trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without