TP Link P100 Users Manual

Download

User Guide

Mini Smart Wi-Fi Socket

Tapo 100

1910012457 REV1.0.0

Contents

Conventions ······························································ 1

More Info······································································ 1

Introduction ······························································· 2

Appearance ······························································· 3

Set Up Your Smart Socket ································· 4

Basic Device Control ············································ 5

Congure Your Smart Socket ·························· 6

Set Schedule ······················································ 6

Enable Away Mode ·········································· 7

Set Timer ······························································ 7

Control Your Device via Voice ··················· 7

Device Sharing ·················································· 8

Authentication ·························································· 9

Conventions

The socket or Tapo P100, or device mentioned in this User Guide stands for Tapo P100 Mini Smart Wi-Fi Socket without any explanations.

Parameters provided in the pictures are just references for setting up the product, which may dier from the actual situation.

You can set the parameters according to your demand.

More Info

• The Quick Installation Guide can be found where you nd this guide or inside the package of the extender.

• Specications can be found on the product page at https://www.tapo.com/

• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

Introduction

Tapo P100 Mini Smart Wi-Fi Socket is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-

functional outlet, enabling you to easily control your lights and household electronic devices via the Tapo app, no matter where you nd yourself.

• Remote Control: Turn your smart socket on or o from anywhere using the Tapo app.

• Timer: Set a countdown timer to automatically turn the smart socket on or o after a certain amount of time.

• Schedule: Use Schedules to set your smart plug to automatically turn on and o.

• Away Mode: Set a period of time during which the smart socket will be randomly turned on and o to make it look like you’re home.

• No Hub Required - Connect to your existing Wi-Fi router.

• Share Device: Add your family members to manage the smart socket together.

• Voice Control - Use Alexa or Google Assistant to control your devices with voice commands.

Appearance

Image may dier from actual product due to dierent regional power specications. We use the US version as an example.

Power Button:

Press the power button to turn on or o the socket. Press and hold the power button for at least 5 seconds to

to restore your smart socket to factory default settings and

reenable setup mode.

Smart Socket:

Plug in your device and control it from your smartphone.

Status LED:

O: Power is o. Blinking Orange and Green: The socket is ready for setup. Green: The socket is working normally. Blinking Green: The system is being upgraded. Orange: There is an error. Blinking Orange: The socket is connecting to a WI-Fi network.

Set Up Your Smart Socket

Follow the steps below to set up your samrt socket via the Tapo app.

1. Download and install Tapo app

Go to Google Play or the Apple App Store

or scan the QR code below to download the Tapo app.

2. Log in to Tapo App

Open the app and usse your TP-Link ID to

the rest.

3. Add your device

Tap the + button in the Tapo app, select Smart Plug and then follow step-by-step app instructions to complete the setup.

Basic Device Control

After successfully setting up your smart socket, you will see the home page of the Tapo app. Here you can view the status of all devices that you've added and manage them. You can tap on the device to control and manage

Home Page

You can toggle on or o the sockets any

time anywhere and tap the device to enter

the status page.

Device Status Page

You can set a schedule, enable away mode, or set a timer to automatically control your device, and view its runtime.

Device Settings

Tap to view the Device Settings page. You can change the device icon, name and

location, you can also invite your family

members to manage the device together.

Congure Your Smart Socket

Schedule and Timer features allow you to create weekly schedule and countdown plans. All of your connected electronics will automatically work at

your preset time, making your life convenient and energy-saving. Away Mode intelligently simulates someone being home by turning the plugged in device (like a lamp) on and o, making it appear that someone is home when you’re on long trips to keep away people with ill intent. Control your device via voice and invite your family members to manage your device together.

Set Schedule

Tap to add a schedule for your smart

socket to automatically turn on or o to simplify

your daily routine.

Tap + to add more schedules and you can also pause the schedule manually anytime.

Set Away Mode

Tap to preset the Away Mode, set the

beginning time and the end time, then your smart socket will be randomly turned on and o during this period.

Set Timer

Tap to set the timer, set a countdonw

timer and your smart socket will automatically

turn on or o after the time ends.

Control Your Device via Voice

Tap the hamburger button and select Voice Control, then you can choose a voice assistant

and follow the instructions to control your device via voice.

Device Sharing

You can invite your family members to manage your device together. On the home page, long

press the device, you can select to remove, favorite or share it.

Enter the TP-Link ID you want to share the

device with, then tap SHARE.

You can also tap the hamburger and select Device Sharing to view your shared

devices and devices shared from others.

button

Authentication

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders..

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved..

http://www.tp-link.com

FCC Compliance Information Statement

Product Name: Mini Smart Wi-Fi Socket Model Number: Tapo P100

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2019.8.1

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1 ) This device may not cause interference, and

2 ) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1 ) l’appareil ne doit pas produire de brouillage;

2 ) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le

fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

NCC Notice

注意！

依據低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。

BSMI Notice

安全諮詢及注意事項

• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

• 注意防潮，請勿將水或其他液體潑灑到本產品上。

• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。

• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。

• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。

限用物質含有情況標示聲明書

限用物質及其化學符號

產品元件名稱

PCB ○ ○ ○ ○ ○ ○

外殼 ○ ○ ○ ○ ○ ○

電源供應板 — ○ ○ ○ ○ ○

備考 1. " 超出 0.1 wt %" 及 " 超出 0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。備考 2. " ○ " 系指該項限用物質之百分比含量未超出百分比含量基準值。備考 3. " — " 系指該項限用物質為排除項目。

鉛 Pb

鎘

汞

六價鉻

CrVI

多溴聯苯

PBB

多溴二苯醚

PBDE

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device.

• Do not use the device where wireless devices are not allowed.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

• Operating Temperature: 0℃~40℃ (32℉-104℉)

• Operating Humidity: 10%~90%RH, Non-condensing

• Storage Humidity: 5%~90%RH, Non-condensing

• Automatic action type of the integrated switch: Micro-disconnection (Type 1.B)

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Symbol Explanation

Indoor use only

AC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to

European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.