Page 1
Package Contents
1
© 2022 TP-Link 7106509940 REV1.0.1
Installation Guide
Omada Gigabit VPN Router
with PoE+ Ports and Controller Ability
Note: The image may dier from the actual product.
Hardware Overview
Hardware Overview
1
2
Front Panel
Router
Rubber Feet
LED Indication
PoE LEDSpeed LED
PWR
On: Power is on.
O: Power is o.
Power Adapter
Installation Guide
SFP SlotLED 1 Gbps RJ45 Port
Back Panel
Kensington
Security Slot
Kensington Security Slot: Secure the lock (not provided) into the security slot
to prevent the device from being stolen.
RESET: Press and hold the button for 5 seconds, the SYS LED will ash quickly,
indicating the device is being reset to its factory default settings.
Grounding Terminal: The router comes with lightning protection mechanism.
Power Socket: Connect to the power outlet via the provided power adapter.
RESET
Power SocketGrounding Terminal
SYS
CLOUD
PoE Max
Link/Act
(SFP WAN/LAN)
Link/Act
(Port 3-4)
Speed
(Port 5-12)
PoE
(Port 5-12)
Flashing: System is running normally.
On/O: System is running abnormally.
On: The device is bound to a TP-Link ID.
Slow Flashing: The device is connected to cloud but not bound to a TP-Link ID.
Quick Flashing: The device is being reset to its factory default settings.
O: The device is disconnected from cloud.
On: The remaining PoE power is ≤ 7 W.
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.
O: The remaining PoE power is > 7 W.
Green On: Connecting to a device but no activity.
O: No device connected to the corresponding port.
Flashing: Transmitting or receiving data.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Amber On: Running at 100/10 Mbps, but no activity.
Amber Flashing: Runni
O: No device is linked to the corresponding port.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Amber On: Running at 100/10 Mbps, but no activity.
Amber Flashing: Running at 100/10 Mbps and transmitting or receiving data.
O: No device is linked to the corresponding port.
Green On: The port is supplying power normally.
Green Flashing: Overload or short circuit is detected.
O: Not providing PoE power on the port.
ng at 100/10 Mbps and transmitting or receiving data.
Hardware Connection
13
Connect via Ethernet
Modem
Internet
Connect to RJ45 WAN Port
Connect via ber network
Internet
Connect to SFP WAN Slot
Fiber-Optic Cable
Optical Module
Page 2
Software Conguration
14
Typical Network Topology
Router
Connect a computer to a LAN port of the router with
1.
an RJ45 cable properly. If your computer is congured with a xed IP, change it to Obtain an IP
address automatically.
Open a web browser and type the default manage-
2.
ment address 192.168.0.1 in the address eld of
the browser, then press the Enter key.
Get started with the Omada Setup Wizard to set up
3.
the network.
After the network setup is complete, click Finish to
4.
Host PCEAP EAPEAP
congure more settings and manage your network.
Clients
More management methods
Omada App
With the Omada App, you can also manage your network at a
local site or a remote site via your mobile device.
or
For detailed congurations, refer to the User Guide
of the router. The guide can be found on the download center of our ocial website:
https://www.tp-link.com/support/download/.
Omada Cloud Portal
You can also remotely access the device through Omada
Cloud Portal. Follow the steps below.
a. Enable Cloud Access on the setting page on the controller
and bind a TP-Link ID to your controller. If you have
configured this in the setup wizard, skip the step.
Scan for Omada App Omada App
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Place the device with its bottom surface downward.
b. Launch a web browser and enter
https://omada.tplinkcloud.com in the address bar.
c. Enter your TP-Link ID and password to log in. A list of
controllers that have been bound with your TP-Link ID will
appear. Then you can click Launch to further configure the
controller.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC,
2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/.
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and
Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca/
Loading...