Toshiba RD-85DT User Manual

HDD/DVD VIDEO RECORDER
RD-85DTSB
Quick Reference
Thank you for purchasing a TOSHIBA HDD/DVD video recorder.
For your safety, read “SAFETY PRECAUTIONS”, “IMPORTANT SAFETY INSTRUCTIONS”, “Precautions” and other notes and information in the INSTALLATION GUIDE.
It is important you read and understand the “SAFETY PRECAUTIONS”, “IMPORTANT SAFETY INSTRUCTIONS”, “Precautions” and other notes that appear in the INSTALLATION GUIDE provided with this TOSHIBA product before you operate your HDD/DVD video recorder. The purpose of the “SAFETY PRECAUTIONS”, “IMPORTANT SAFETY INSTRUCTIONS”, “Precautions” and other notes is to provide you with warnings and safety instructions that will assist in preventing the misuse of your HDD/DVD video recorder.
This leaflet is to help you start up your recorder and experience a basic operation. To learn about the recorder and obtain its full performance, refer to the OWNER’S MANUAL.
xx
I
(
is reference page in the INSTALLATION GUIDE, and
xx
O
in the OPERATIONS.)
Insert the batteries into the remote control.
1
Open the cover.
1
N PM0025462010
RD-85DT_QG_E 3/27/06, 17:361
2
Insert batteries (R03 size).
Make sure to match the + and – on
2
the batteries to the marks inside the battery compartment.
Close the cover.
3
Open to go inside.
1: Connect the recorder.
Disconnect the aerial cable from your TV, and connect it to the RF IN (FROM ANT.) terminal on the recorder.
1
Using the coaxial cable (supplied), connect the RF OUT (TO TV) terminal to the TV.
2
Connect the AV1(AUDIO/VIDEO)IN/OUT socket to a TV equipped with SCART input using the SCART cable.
3
Connect the power plug of the recorder to a wall outlet.
4
4
To wall outlet
Turning the power on
Press ON/STANDBY.
Power cord
Coaxial cable (supplied)
To aerial input
1
2
TV
Aerial cable (Not supplied)
(AUDIO/VIDEO)
To SCART input
If you use a satellite receiver, connect it to the AV2(SAT/ DECODER)IN/OUT socket.
To AV 1
IN/OUT
SCART cable (not supplied)
3
Satellite receiver
Turning the power off
Press ON/STANDBY.
ON/STANDBY button
ON/STANDBY button
RD-85DT_QG_E 3/27/06, 17:362
When the power is turned on, the ON/STANDBY indicator changes colour from red (standby mode) to green (operation).
After a few seconds, a startup screen appears. The following icon will appear on the top right corner of the screen.
e.g.
Loading
When this icon disappears, the recorder is ready to operate.
When the recorder is turned on for the first time, recorder automatically sets its own tuner and clock. See the next page.
2: Complete the recorder’s setup.
Setting the clock . . .
To select an item.
To enter your selection.
1 When powered on for the first time, the recorder
automatically sets its own tuner and clock.
First, you will see a short animation, then the loading icon flashes for a while. After the icon has disappeared, the recorder starts scanning
e.g.
Progress
Prog. Name
3
4
6
9
14
29
EXIT
AUTO TUNNING
ITV1 23
Channel 4
ITV2
Teletext
E4
UKTV Food
Cancel
Type UHF Quality
GOOD
GOOD
23
GOOD
23
GOOD
23
GOOD
23
GOOD
23
Tuning in . . .
e.g.
Prog. Name
3
4
6
9
14
29
AUTO TUNNING
11 programmes found
8 TV
Press OK to watch programme
ITV1 23
Channel 4
ITV2
Teletext
E4
UKTV Food
Change
Page Up
DTV MENU
Watch
Page Down Sort
5 Text
Type UHF Quality
Back
GOOD
GOOD
23
GOOD
23
GOOD
23
GOOD
23
GOOD
23
When complete the tuning, the recorder proceeds to set its clock. Press the OK/ENTER button on the remote control.
Manual clock set
Year
2006
Date Time
4
21 (Fr) 3016 :
/
Make sure the time and date are set correctly.
2 If correct, press OK/ENTER.
If you want to correct, shift the cursor by the value by ADJUST (
/ ) or / .
/ , and change
When complete, press OK/ENTER.
3 Select “Yes” by / ,
then press OK/ENTER.
Set date and time?
The Initial settings menu returns.
Yes No
Note
If no stations are received, the recorder cannot finish tuning. Secure the aerial connection to the recorder.
Open to go to the reverse side to start operations.
GUIDE to RE-TUNING DIGITAL TV CHANNELS
From time-to-time, new or changed digital television services may be broadcast. To view these, your recorder should be re­tuned.
ANALOGUE SWITCH-OFF
This is a digital video recorder which allows use of digital services. However, during the lifetime of this unit, it is very likely that analogue services will be switched off to allow for more new digital services. This switch-off will happen in a number of phases, and will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that the existing and new services can be viewed as they become available.
STANDBY
Your recorder has an optional feature that finds new services automatically if you leave it in the standby mode overnight occasionally. However, to ensure the most updated digital services, it is recommended you also auto-tune during major changes, such as analogue switch-off.
RE-TUNING DIGITAL TV CHANNELS
Follow the procedure described on page 26, OPERATIONS.
Configure the initial settings.
Press the Exit key to cancel settings.
Time setting
Start
RD-85DT_QG_E 3/27/06, 17:363
Loading...
+ 5 hidden pages