Thomson THT740 operation manual

THT740

Empfänger für hochauflösendes Antennenfernsehen

Inhaltsverzeichnis User Manual

www.thomsonstb.net

1 2

13 14

24 26

Dieses Produkt wurde unter der Zuständigkeit der STRONG Group hergestellt und verkauft. THOMSON und das THOMSON Logo sind Warenzeichen von Technicolor

(S.A.) oder seinen Vertretern, welche unter lizenzierter Nutzung der STRONG Group

Jeder andere Produkt-, Service-, Firmen-, Handelsname sowie jedes andere Logo,

auf die in diesem Zusammenhang verwiesen wird, werden von Technicolor (S.A.)

geführt werden.

Vertreten durch STRONG Ges.m.b.H.

Franz-Josefs-Kai 1

1010 Wien, Österreich

Email: support_at@thomsonstb.net

weder bestätigt, noch unterstützt.

11 Aug 2016 17:45

Licenses

ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U.S.A.

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009by Dolby Laboratories. All rights reserved.

THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.

English

STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC

This product has been manufactured and sold under the responsibility of STRONG Group. THOMSON and the THOMSON logo are trademarks of Technicolor (S.A.) or its affiliates and are used under license by STRONG Group. Any other product, service, company, trade name and logo referenced herein are neither endorsed nor sponsored by Technicolor (S.A.) or its affiliates.

Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby Audio, Dolby Digital, Dolby Digital Plus and the double-D symbol are registered trademarks of Dolby Laboratories. All other product names are trademarks or registered trademarks of their respective owners.

11 Aug 2016 11:14

TABLE OF CONTENT

1.0 INTRODUCTION 3

1.1 Safety Instructions 3

1.2 Storage 3

1.3 Equipment Set-up 3

1.4 Accessories 4

1.5 Usage of external USB devices 4

2.0 YOUR RECEIVER 4

2.1 DEFAULT PIN: 0000 4

2.2 Front Panel 4

2.3 Rear Panel 4

2.4 Remote control 5

2.5 Installing the batteries 5

2.6 Using the remote control 6

3.0 CONNECTION 6

3.1 Connecting to a terrestrial antenna 6

3.2 Connecting to TV with HDMI cable 6

3.3 Connecting to TV with SCART cable 6

3.4 Connecting a USB storage device 6

3.5 Connecting to the Internet for RSS feeds and weather forecasts 6

3.6 Connection to main power supply 6

3.7 Extended connections for your home entertainment 7

4.0 STARTING UP FOR THE FIRST TIME 7

4.1 Language selection 7

4.2 Region, Subtitles, Scan Mode and screen settings 7

4.3 Aerial Adjustment 7

5.0 QUICK GUIDE TO USING YOUR RECEIVER 8

6.0 OPERATION 8

6.1 Changing channels 8

6.2 Info Banner 9

6.3 Selection of audio language 9

6.4 Videotext 9

6.5 Subtitles 9

6.6 EPG (Electronic Programme Guide) 9

7.0 MAIN MENU 9

7.1 Installation of channels 9

7.2 Channels 10

7.3 Settings 12

7.4 Multimedia 14

7.5 Network 16

7.6 Software update 16

8.0 TROUBLESHOOTING 17

9.0 TECHNICAL SPECIFICATIONS 18

1.0 INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

• In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

• To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

• Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a power cord with wet hands. It may cause an electric shock.

• When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket.

• Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, and only after disconnecting from the mains voltage supply. Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock.

• Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside.

Safety Precautions

• Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high voltages and possible electrical hazards. Opening the receiver will void the warranty of the product. Refer all maintenance or servicing to suitably qualified personnel.

• When you are connecting cables, be sure that the receiver is disconnected from the mains supply voltage. Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment.

• It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver. If the receiver does not operate normally even after strictly following the instructions in this user manual, it is recommended to consult your dealer.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against mechanical shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging away from children. When transporting the receiver from one place to another or if you are returning it under warranty conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could damage the product and void your warranty.

1.3 Equipment Set-up

We recommend you to consult a professional installer to set up your equipment. Otherwise, please follow the instructions below:

• Refer to the user manual of your TV and, if applicable, your antenna.

• Make sure that the HDMI cable and, if applicable, outdoor components are in a good condition.

• If you use the TV SCART connection, use a well shielded SCART cable. This manual provides complete instructions for installing and using this receiver. The following symbols will serve as follow.

English

INTRODUCTION

Warning: Indicates warning information.

Tips Indicates any other additional important or helpful information. MENU Represents a button on the remote control or the receiver.

Move to Represents a menu item within a window.

(Bold characters)

(Italic characters)

1.4 Accessories

• Installation instructions

• 1remote control unit

• 2x batteries (AAA type)

• Power adapter12V DC, 1.5 A

WARNING: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or

used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used (e.g. NiMH), we recommend using types with low self-discharge to ensure long time operation of your remote control.

1.5 Usage of external USB devices

• The USB port supports multimedia player functions and can be used to update your receiver software. Recording function via USB is NOT supported by this receiver.

• STRONG cannot guarantee the playback of all multimedia files although extensions are listed, as it depends on file size, codec, bit rate and resolution.

• It is advised not to store important information on USB storage devices used with the receiver.

• Playback of files cannot be guaranteed although extensions are listed, as it depends on codec, data bit rate and resolution used (all MPEG codec formats are supported).

• Always make backups of data on your USB storage device before using it with this receiver.

• STRONG will not take responsibility for any loss of information or circumstances caused by loss of information.

2.0 YOUR RECEIVER

2.1 DEFAULT PIN: 0000

2.2 Front Panel

1. q Switches the receiver ON or into Standby

2. P- /P+ buttons Switches to the previous/next programme

3. IR Sensor Receives commands from the remote control

4. LED Display Shows channel number and the time in standby

5. Mode Indicator LED RED indicates that the receiver is in STANDBY mode. GREEN indicates that the

receiver is in operation mode.

6. Card slot For service purposes only. No user function.

2.3 Rear Panel

1. ANT IN To connect to your antenna (room, -outdoor or roof antenna) for reception of

broadcast signals.

2. ETHERNET To connect to your Ethernet cable (RJ-45) for RSS feeds and weather forecasts

3. AUDIO L/R To connect your receiver to an analogue audio amplifier.

YOUR RECEIVER

Fig. 1

Fig. 2

+ 16 hidden pages