TC-Helicon VSM-300 XT User Manual

VSM-300 XT

USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Voltage Line plug according to standard.

110-125V UL817 and CSA C22.2 no 42.

220-230V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.

240V BS 1363 of 1984. Specification for 13A fused plugs and switched and un-switched socket outlets.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

Warning!

• To reduce the risk of fire or electrical shock, do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids,

such as vases, are placed on the equipment.

• This apparatus must be earthed.

• Use a three wire grounding type line cord like the one supplied with the product.

• Be advised that different operating voltages require the use of different types of line cord and attachment plugs.

• Check the voltage in your area and use the correct type. See table below:

• This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible.

• To completely disconnect from AC mains, disconnect the power supply cord from the AC receptable.

• The mains plug of the power supply shall remain readily operable.

• Do not install in a confined space.

• Do not open the unit - risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment.

Service

• There are no user-serviceable parts inside.

• All service must be performed by qualified personnel.

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240 Risskov, Denmark, hereby declares on its own responsibility that the following product:

VoiceSolo VSM-300XT- Active Voice

Monitor and Control

- is covered by this certificate and marked with CE-label conforms with following standards:

EN 60065 Safety requirements for mains (IEC 60065) operated electronic and

related apparatus for household and similar general use

EN 55103-1 Product family standard for

audio,video, audio-visual and entertainment lighting control apparatus for professional use. Part 1: Emission.

EN 55103-2 Product family standard for

audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 2: Immunity.

With reference to regulations in following directives: 73/23/EEC, 89/336/EEC

Issued in Risskov, 10 - 2007

Mads Peter Lübeck

Chief Executive Officer

EMC / EMI.

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

For the customers in Canada:

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT SAFETY INSTRUCTIONS

TABLE OF CONTENTS

VoiceSolo VSM-300XT Rev 1.0 English version Prod. No: 606120091

Important Safety Instructions . . . . . . . . . . . .a

Certificate of Conformity . . . . . . . . . . . . . . .b

Table of Contents . . . . . . . . . . . . . . . . . . . . .3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . .4

Front panel diagram . . . . . . . . . . . . . . . . . . .6

Back panel diagram . . . . . . . . . . . . . . . . . . .7

I/O box diagram . . . . . . . . . . . . . . . . . . . . . .8

Mic stand mounting procedure . . . . . . . . . .11

Making connections . . . . . . . . . . . . . . . . . .12

Overcoming feedback . . . . . . . . . . . . . . . .13

Setup diagrams . . . . . . . . . . . . . . . . . . . . .14

Specifications . . . . . . . . . . . . . . . . . . . . . .16

Audio path diagram . . . . . . . . . . . . . . . . . .17

Specifications, interface, and features are subject to change without notice due to continued product improvement

INTRODUCTION

Welcome to VoiceSoloXT

The TC-Helicon VoiceSoloXT VSM range of near field live monitoring speakers is a new concept in personal monitoring. TC-Helicon strives for excellence in all things related to vocals, and the VSM range builds upon the success and worldwide reputation of TC-Helicon's vocal expertise.

If you can't hear yourself correctly in a live situation, it's hard to produce a good performance. VSM monitors are designed to integrate into a boom-style microphone stand bringing the speaker close to the performer. This yields a wide range of benefits over existing wedge-type or in-ear options such as:

• Lower monitor bleed into the main PA sound

• High volume level before feedback

• Better interaction with audience; stage space is

reclaimed from floor wedges and ear plug barriers are not required as with in-ear monitors.

The VoiceSoloXT VSM monitors use a two-way point source ICT ™ driver that eliminates the problem of hearing separated high and low frequencies which happens when listening to conventional speaker systems. This is especially important when used on a microphone stand as the speaker is located very close to the listener and the separation would be more evident.

Features:

• Improved high frequency response in the critical 4 to 10

kHz range resulting in higher accuracy and smoother sound.

• Quick mic stand set up. Integrates with boom so the

same stand is used for the monitor and microphone.

• Versatile placement options provided by dual stand

mounting holes and dual bevelled edges for floor mounting.

• Two-way point source 6.5" ICT™ driver for optimal near-

field live monitoring.

• High volume capability: 116dB peak SPL at .5m

• 150W BASH amplifier.

• Cast aluminum enclosure for maximum rigidity and

minimum cabinet resonance

• Front panel mounted controls for easy access.

• External IO box interfaces with instruments, aux mixes

• Microphone preamp, stereo line and aux inputs.

• Phantom power on mic input

• Pass thru to house mixer on all inputs

• Mic Level, line level and master level controls.

• Shape EQ control on Mic input, plus 18dB/octave 75hz

Low Cut Filter.

• Selectable 75Hz/150 18dB/Octave Low Cut Filter on

Speaker output mix

• Selectable Mono/Stereo operation for line input

• Output for active subwoofer

About TC-Helicon

TC-Helicon’s core value is that the voice is the world's most beautiful instrument. Therefore, everything TCHelicon does is dedicated to this instrument. TC-Helicon envisions a world where those who work with voice are able to bring out its very best and where the possibilities of vocal craft are endless.

The company's mission was galvanized by a simple question, "Isn't it time that someone finally provided dedicated tools and solutions for voice?"

TC-Helicon is revolutionizing the vocal channel by providing innovative tools and solutions for people who create and work with the speaking and singing voice. Our customers include the most demanding of live performers, producers, broadcasters and recording engineers.

Enjoy!

The TC-Helicon Team

a TC Group company

+ 14 hidden pages