TC Helicon Go Solo User Manual

Quick Start Guide

GO SOLO

High-Denition Audio/MIDI Interface for Mobile Devices

Getting started

Connect GO SOLO to a computer, phone or
tablet using t he included cables. If using the
provided lightning cable, ins ert a pair of AA
batteries to power GO SOLO, or connec t a 5V power
supply (not included) to power GO SOLO and charge
your iOS device.

Connect microphone, instrument or line-level
source to the input using XLR or ¼" cables.

Plug a pair of headp hones into the HEADPHONE

output. Se t LEVEL control to minimum to st art.

To enable phantom power move the 48 V
power switch to the ON position. The 48 V LED on
the front panel will light blue.

While speaking into the microphone or playing
your instrument, turn up the GAIN wheel. The SIG
LED should light green to indicate a signal present.
If the SIG LED lights red, turn the GAIN wheel down
to avoid clipping.

Connect MIDI devices to the mini 2. 5 mm input
and output jacks using the included adapter c ables.

Download your favorite TC Helicon app to
begin experimenting with eect s.

Specications

Analog Connections

Microphone 1 x XLR balance d

Impedance approx 2.3 k

Instrument input 1 x ¼" TS unbalanced

Impedance approx 470 k

Headphones 1 x ⁄" TRS, ste reo

Digital Connections

Mobile device / computer Mini USB 10 pin

Driver USB Audio 1.0 Class Co mpliant

Controls

Input gain 0 to +50 dB, adjust able

Phantom power O / on, swi tchable

Voltage +48 V

MIDI

Connector s 2 x 2.5 mm (cables i ncluded)

System Processing

A/D – D/A conversi on 24-bit @ 44.1 kHz, 4 8 kHz

Frequency response 20 Hz to 20 kHz, +0/-3 dB

Dynamic range > 98 dBA

Power

Power source USB bus power, DC powe r supply, battery p ower

Power supply 5 V DC, ≥2.5 A, center posit ive (not included)

Batteries 2 x AA (includ ed)

Dimensions / Weight

Dimensio ns (H x W x D) 40 x 45 x 128 mm (1.6 x 1.8 x 5")

Weight 0.28 kg (0.62 lbs)

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION

TC Helicon

GO SOLO

Responsible Party Name: Music Tribe Co mmercial NV Inc .

Address: 5270 Procyon Street

Las Vegas, NV 8 9118
USA

Phone Number: [phone]

GO SOLO

This equi pment has been test ed and found to compl y with the limits f or a ClassB digital

device, pur suant to part 15 of the FCC Ru les. These limit s are designed to pro vide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

install ed and used in accord ance with the instr uctions, may cau se harmful inter ference

to radio communications. However, there is no guarantee that interference will not occur

in a part icular installat ion. If this equipm ent does cause har mful interfe rence to radio or

televisio n reception, whic h can be determine d by turning the equ ipment o and on,

the user is e ncouraged to tr y to correct the in terference by on e or more of the

following measures:

• Reorient or relocate the receiving antenna.

LEGAL DISCLAIMER

Music Tribe acce pts no liabilit y for any loss which ma y be suered by any per son who relies
either wholly or in part upon any description, photograph, or statement contained herein.
Technical specications, appearances and other information are subject to change without
notice. All tr ademarks are t he propert y of their respec tive owners. M idas, Klark Teknik,
Lab Grup pen, Lake, Tannoy, Turbosound, TC Ele ctronic, TC Hel icon, Behringer, Buge ra,
Auratone an d Coolaudio are tra demarks or reg istered trade marks of Music Tribe G lobal
Brands Ltd. © M usic Tribe Global Bra nds Ltd. 2019 All rights res erved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding
Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, S outh China Moder n Chinese Medic ine Park, Nanlang Town, 528 451,
Zhongshan City, Guangdong Province, China

• Increase the separation between the equipment and receiver.

• Connec t the equipment into a n outlet on a circui t dierent from t hat

to which th e receiver is connec ted.

• Consult the d ealer or an experi enced radio/T V technician for he lp.

This equi pment complies wit h Part 15 of the FCC Rules. Op eration is subjec t to the

following two conditions:

(1) This device may not c ause harmful inte rference, and

(2) This device mu st accept any inter ference received , including inter ference that may

cause undesired operation.