Taylor C002 Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C002

Item No.

_______________________________

C002

Offer super premium frozen custard, low overrun ice cream,
or sorbet in two separate flavors.

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR)
maintains mix below 41ºF (5ºC).

Indicator Lights

In order from top to bottom, separate lights indicate when mix is
low, refrigeration on, pre-chill mode, and scraping/ejection motor
on.

Product Chute

Ribbon of frozen product flows down chute to separate dipping
cabinet. Easily removable for cleaning or moving dipping cabinet.

Mix Flow Regulator

Easy to read markings allow operator to dial in the correct amount
of mix flowing into freezing cylinder for proper consistency. Adjusts
for operation from the front, back, or side, depending on space
requirements.

Features

Continuous Batch Freezer

Two Flavor

Shown with separate dipping cabinet

(available through your local Taylor distributor).

C002

C002Continuous Batch Freezer

Electrical

Two dedicated electrical connections are required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Scraping/Ejection Motor

Two, 2.0 HP.

Refrigeration System

Two, 14,000 BTU/hr compressors (nominal rating). R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to
prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Weights lbs. kgs.

Net 825 374.2
Crated 896 406.4

cu. ft. cu. m.

Volume 48.4 1.37

Dimensions in. mm.

Width 26-1/2 673
Depth 33-7/8 860
Height 61-5/8 1565
Floor Clearance* 7-1/2 191

*Mounted on standard casters

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

Specifications

055080-ADV

4/05

Options

 Dipping Cabinet (Consult your local Taylor distributor)

Width: 28-7/16” (722 mm)
Depth: 17-3/4” (451 mm)
Height: 37-1/2” (953 mm)
Weight: 175 lbs. (79.4 kg)

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Electrical Maximum Minimum

Fuse Size Circuit Ampacity Poles (P)

Left Right Left Right Wires (W)

208-230/60/1 Air 30 30 27 23 2P 3W
208-230/60/1 Water 30 30 24 23 2P 3W
208-230/60/3 Air 20 20 19 15 3P 4W
208-230/60/3 Water 20 20 16 15 3P 4W
380-415/50/3N~ Air 12 8 11 7 4P 5W

This unit may be manufactured in other electrical characteristics. Refer to the local
Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)