Taylor BC10 Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

BC10/BW11

Item No. _______________________________

BC10/BW11

Simple to use. Dispense your soft serve ice cream directly into

the serving cup. Attach the lid to the cup, add the desired mix-ins,
blend and serve. Clean up is easy. The splash guard moves easily,
and the sealed stainless steel housing wipes down quickly.

Permanent Agitator. Blending the mix-ins with your soft serve ice

cream is quick and easy. A separate agitator is available for hand
dipped ice cream.

Quiet. Blender operation is quiet. Brushless, ball bearing induction

motor provides consistent product mixing.

Counter or Wall Mount. Blender is available as BC10 to sit on the

counter, or BW11 to mount on the wall or soft serve freezer
(mounting bracket and drip tray are included).

Foot Control. Guarded foot control for hands-free operation of

blender.

Razzle® Program Materials

Cups and Lids

Razzle® cups and lids are available by the case (1,000 per case)

051967 12 fl. oz. (355 ml)
051968 16 fl. oz. (475 ml)
051969 Domed lids fit both sizes of cups. Allows for blending with

virtually no splattering.

X52080 Organizer

Conveniently holds lids and two sleeves
of Razzle cups. For counter or wall
mount: template and hardward
included.
Width: 16 in. (406 mm)
Height 20 in. (508 mm)
Depth: 4 in. (102 mm)

Consult your local Taylor distributor for additional merchandising
materials for a complete Razzle program.

Features

Razzle® Blender

BC10

BW11

X52080 Organizer

Manufactured by Vita-Mix® Corporation
Models VM-0800, VM-0801, VM-0803,
VM-0804
Five Year Warranty against defects.

BC10/BW11

BC10/BW11Razzle® Blender

Part Number X52037-1 X52037-2 X52078-1 X52078-2 X52566-1 X52566-2 X52566-3 X53407-1 X53492-1 X53492-2
Standard bins 2 4 2 --- 2 4 --- 2 --- 1
High volume bins 2 --- --- 2 2 --- 4 --- 1 --­Width - inches 14 14 14 14 29-1/4 29-1/4 29-1/4 10 6-5/16 6-5/16
Width (mm) 356 356 356 356 743 743 743 254 160 160
Height - inches 34 32 20 20 19-1/4 16 19-1/4 20 18-11/16 16-1/16
Height (mm) 864 813 508 508 489 406 489 508 475 408
Depth - inches) 6 6 6 6 6 6 6 6 6 6
Depth (mm) 152 152 152 152 152 152 152 152 152 152
Mount on Wall Wall Counter or Wall Counter, Wall or Hood*** Wall Wall Wall

Portion controlled mix-in dispenser kits are available in several
configurations. Dispensers may be mounted on the wall, counter, or
soft serve freezer. Kits contain mix-in containers, mounting bracket,
template and hardware. (See photos and chart above for further
details. Other dispensers may be available.)

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Dimensions in. mm.

Width 10 7-1/4 254 184
Depth 9 8 229 203
Height 24 17 610 432

*

BC10 BW11 BC10 BW11

Weights lbs. kgs.

Net 17 17 7.7 7.7
Crated 26 21 11.8 9.6

cu. ft. cu. m.

Volume 1.9 1.1 0.05 0.03

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water NA

Options:_________________________________________________
_________________________________________________________

051750 Mixing Collar

Plastic collar may be used in place of the domed lid.

051498 Agitator for Hard Ice Cream

An agitator for hard ice cream is available. Simply replace the agitator for soft
serve or frozen yogurt with the agitator designed for blending hand-dipped ice
cream.

Options

Dispensers

052178-ADV

6/05

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

X52037-1

X52078-1 X52566-1 X53407-1 X53492-2

Electrical Total Supplied

120/50/60/1 2.6 5-15P
220-240/50/1 1.3 ***

*** International cord specifications vary.

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)

Amps with NEMA Cord