Tascam CG-2000 Specifications

CG-2000

Product Spec Sheet

Master Clock Generator

CG-2000

■ Specifications
Inputs and outputs

VIDEO INPUTS

Connector type: BNC
Input level: 0.5–2.0 Vp
Input impedance: 75 Ω (can turn ON/OFF in menu)
Input format

SD video black burst:

NTSC (RS-170A)
PAL (ITU-R624)

SD video composite sync:

NTSC B/W (RS-170)

HD video tri-ｌevel:

720p/50/59.94/60 (SMPTE 296M)
1080p/23.976/24/25/29.97/30/50/59.94/60 (SMPTE 274M)
1080i/23.976/24/25/29.97/30 (SMPTE 274M)
1080PsF/23.976/24/25/29.97/30 (SMPTE RP211)

Permissible frequency deviation: ±10 ppm

WORD/EXT INPUTS

Connector type: BNC
Input level: 0.5-5.0 Vp
Input impedance: 75/50 Ω (can set to 75/50/OFF in menu)
Supported frequencies

WORD CLOCK: 32/44.1/48/88.2/96/176.4/192 kHz
（−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected）
ATOM: 10.0 MHz
GPS: 10.0 MHz

Permissible frequency deviation: ±10 ppm

AES3/11 INPUT

Connector type: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input level: 0.2-10 Vp
Input impedance: 110 Ω
Format: AES11-2003, AES3-2003, IEC60958-4
Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz

（−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected）

Permissible frequency deviation: ±10 ppm

-p

-p

-p

Jun, 2014

0005a -1- TEAC CORPORATION

CG-2000

CALIBRATION INPUT

Connector type: BNC
Input level: 0.5-5.0 Vp
Input impedance: 50 Ω (can turn ON/OFF in menu)
Supported frequencies

ATOM: 10.0 MHz
GPS: 10.0 MHz, PPS

VIDEO OUTPUTS

Connector type: BNC
Output impedance: 75 Ω
Output format

SD video black burst:

NTSC (RS-170A)
PAL (ITU-R624)

SD video composite sync:

NTSC B/W (RS-170)

HD video tri-level:

720p/50/59.94/60 (SMPTE 296M)
1080p/23.976/24/25/29.97/30/50/59.94/60 (SMPTE 274M)
1080i/23.976/24/25/29.97/30 (SMPTE 274M)
1080PsF/23.976/24/25/29.97/30 (SMPTE RP211)

WORD OUTPUTS

Connector type: BNC connector
Output level: 1.0-3.5 Vp
Output impedance: 75 Ω
Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz

11.2896/12.288 MHz (Super Clock, only connectors 11/12)
(−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected)

AES3/11 OUTPUTS

Connector type: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output level: 2.5 Vp
Output impedance: 110 Ω
Format: AES11-2003, AES3-2003, IEC60958-4
Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz

S/PDIF OUTPUTS

Connector type: RCA pin jack
Output level: 0.5 Vp
Output impedance: 75 Ω
Format: IEC60958-3 (S/PDIF)
Supported frequencies: 32/44.1/48/88.2/96/176.4/192 kHz

(−4/−0.1/0.0/+0.1/+4% PULL UP/DOWN supported only when 48/96/192 kHz selected)

ALARM OUTPUT

Connector type: 6-pin Euroblock connector
Output format: Open collector
Output impedance: 10 Ω
Resistance: 20 V
Maximum current: 50 mA

-p

-p (can set by 0.5V steps in menu)

-p

-p

0005a -2- TEAC CORPORATION

CG-2000

Performance

Internal oscillator

Type: OCXO（oven-controlled crystal oscillator）
Permitted frequency deviation: ±0.01 ppm （Adjusted value when shipped new from the
factory）
Frequency temperature characteristics: ±0.05 ppm （0 to 40℃）
Long-term frequency stability: ±0.005 ppm （daily）
±0.5 ppm （annually）

General

Power

AC100 V–240 V, 50/60Hz

Power consumption

14 W

External dimensions

483 x 45 x 310mm (width × height × depth)

Weight

3.3 kg (7.3 lb)

Operating temperature range

0–40℃ (32–104゜F)

0005a -3- TEAC CORPORATION

CG-2000

■ Dimensional drawings

_________________________________________________________________________________________________________________________________________________

※TASCAM is trademark of TEAC CORPORATION, registered in the U.S. and other countries.
※Other company names, product names and logos are the trademarks or registered trademarks of their
owners.
※Specifications and appearance are subject to change without notice.
※All information included in this document is as of Jun, 2014.

0005a -4- TEAC CORPORATION