Issues and Solutions
Hypersonic 2
2.0.0
Issues and Solutions
• Open "Hypersonic 1" projects with "Hypersonic
2": Under certain circumstances you may notice
that some Patches are not properly load into
Hypersonic 2.
Solution: Please go to the "Setup Page" and set
"Program Change" to "Off". Then click the "Save
Defaults" button. Close the project and reopen it
again.
•
Important Note for Hypersonic 1 Mac users:
Before copying the content data over an existing
Hypersonic 1 installation, please make sure to
backup the folders /Patches/100 User Patches/
and /Patches/121 User Combis/.
Please find further instructions in the Read Me
files to be found in the installation format folders
on the Mac.
Welcome !
Hypersonic 2 - most important news
In-Depth Patch Editing
Hyperphrases
Hypersonics classic analog arpeggiator modes & monophonic step
Combi Chain Feature / Pre-loading
Increased Sample Content
New Plug-in Formats/ Multi Output
With version 2.0 the user gets full access to all oscillator parameters, the
First of all we would like to thank you for purchasing a high quality
product from Steinberg.
This document contains information about installing and using
Hypersonic 2 on your computer.
•
Full patch editor – hundreds of parameters for unlimited
creative options
• Hyperphrase (polyphonic arpeggiator) with 200 categorized
phrases included, featuring MIDI file import
• Combi chain feature – switching combinations of multiple patches
per program change / controller chain.
• General MIDI Hypermodule GM 4 included
• Setup page option for preloading required content into RAM
• Improved audio quality for all drums
• New drumkits, especially theelectronic department has been
significantly expanded
• New XXL instrument versions – bigger multisample versions of
many important instruments
• Extended sample content – more than double the size of
Hypersonic I, most instruments revised, many additional
multisamples
• 800 new and 1000 revised factory patches
• 5 new effect types: high quality reverb, reverse reverb, diffuser
delay, bi-phaser, tube drive
• Extended synthesis editor featuring in-deep patch editing
• Delivery format: VST PC/Mac, stand-alone with rewire client
support, DXi, AU
•
Improved graphical user interface
•
MIDI Learn for all editing knobs
•
New plug-in formats supported: DXi, ReWire for Pro Tools®
support, standalone
•
Multi-channel output option
modulation matrix and LFOs, this was previously only available to owners
of the US-1 expansion. This allows complete control over the different
types of synthesis.
sequences are enhanced in Hypersonic II by polyphonic phrases and the
possibillity to import user phrases from MIDI files.
For live performance on stage or comfortable work in the studio Combis
using multiple patches can be switched using an assignable MIDI
controller. Pre-loading allows instant switching between these Combis by
putting the needed content intellegently into RAM. Any held notes of the
first combi continue for as long as they are held when switching.
Hypersonic 2.0 comes with more than double the sample content, new
multi-samples, new instruments aswell as revised patches and
instruments of version 1.0. For example the original Hypersonic Grand
Piano has been extended and a whole new additional piano has found its
way into version 2.0.
Hypersonic 2.0 will be available for all major host applications.
Hypersonic 2.0 will feature VST format aswell as AU, DXi and an standalone version to be used via ReWire in any host. Hypersonic will feature
multi output compatibility in all of these formats.
Hypersonic 2 – Read Me 2.0 2 of 2 Steinberg Media Technologies GmbH June 2005
General MIDI Hypermodule GM 4
New Effects
MIDI Learn For Most Controls
Important
System Requirements
Steinberg Key required !
(not included)
The General MIDI Hypermodule GM 4 is already included in Hypersonic
2.0 and ready to go. The GM-4 General MIDI Module delivers 128 GM
instruments plus a great GM drum kit. It is compatible to the GM
standard and provides an extremely easy way of sequencing GM files.
For advanced fun and versatility 5 new types of effects have been added
in Hypersonic 2.0: high quality reverb, reverse reverb, diffuser delay, biphaser and tube drive.
MIDI Learn mode allows lightning fast assigning of MIDI controllers to
almost any sound-forming parameter within Hypersonic 2.0. MIDI Learn
allows MIDI CC data to be instantly “learned” (automatically assigned) to
any of the controls.
Read the Software Licensing Contract supplied with the software. By
installing the software or sending back the registration card, you are
declaring yourself to be in agreement with the conditions in the contract.
If you want to read the Software Licensing Contract independently from
the installation process, or if you want to print out the contract, you'll find
the text file on the CD-ROM in the "License" directory. The text file is
available in several languages, simply select the file in the language of
your choice.
Macintosh Windows
A Power Mac G4 867 MHz computer (faster
recommended)
DVD ROM drive for intsallation
512 MB of RAM (1 GB recommended)
1,7 GB of hard disk spaceMac
OS X version 10.3 or higher
CoreAudio compatible audio hardware
If you want to use Hypersonic 2 as a plug-
in, you’ll need Cubase or Nuendo (version
1.5 or higher) or another VST 2.0, RTAS or
AU compatible host application.
Please note that some features may not be
supported in other host applications.
A Steinberg Key and an available USB port
Monitor and graphics card supporting 1024
x 768 resolutionPlease also observe the
system requirements of your host
application.
A PC with an 1 GHz Pentium or AMD
compatible processor (faster recommended).
DVD ROM drive for intsallation
512 MB of RAM (1 GB recommended).
1,7 GB of hard disk space.
Windows® XP Home or Professional.
Windows MME compatible audio
hardware (an ASIO compatible audio
card is recommended).
If you want to use Hypersonic 2 as a
plug-in, you’ll need Cubase or Nuendo
(version 1.5 or higher) or another VST
2.0 or DXi 2 compatible host application.
Please note that some features may not
be supported in other host applications.
A Steinberg Key and an available USB
port.
Monitor and graphics card supporting
1024 x 768 resolution.
Please also observe the system
requirements of your host application.
Hypersonic 2 – Read Me 2.0 3 of 3 Steinberg Media Technologies GmbH June 2005
Installation
PC ->
Mac ->
The installation of the software and the Steinberg Key authorization is
covered in detail in the manual.
1) Make sure the Steinberg Key is NOT plugged in.
2) Insert the Hypersonic 2 DVD into your DVD drive, launch the Explorer
or open the “My Computer” window and double click on the symbol for
the DVD drive that holds the Hypersonic 2 DVD. If autostart is activated
the DVD contents will open in a new window automatically.
3) Double click on the Hypersonic 2 Installer symbol to launch the
installation program and follow the instructions on screen.
4) After installation of the Steinberg Key drivers, the installation routine
may initiate a restart of your computer. The installation routine will
continue automatically after this restart.
5) After the automatic restart, make sure the Steinberg Key is plugged
into the USB port! Simply plug the Steinberg Key into the USB port while
the system is booting up. In case there is no restart, simply follow the
instructions on screen.
6) When the installation process is completed, restart your computer.
After installing the Hypersonic 2 software and the Steinberg Key drivers,
Hypersonic 2 is ready to use.
The Hypersonic 2 OSX Installer application will overwrite any previous
versions of Hypersonic 2 that may be found.
1) Quit all other applications so that you return to the Finder. Disable any
system activity monitoring software or extension, in particular anti-virus
software. Now, insert the Hypersonic 2 DVD into the computer’s DVD
drive.
2) If it doesn’t do so automatically, double-click the Hypersonic 2 icon to
open the CD window.
3) Double-click the Mac Installer folder and choose the folder named
after the format you wish to install. Follow the installation instructions in
the folder to install Hypersonic 2 and its content. After installing the
Hypersonic 2 software and the Steinberg Key drivers, Hypersonic 2 is
ready to use.
Updating from the Web
Hypersonic 2 – Read Me 2.0 4 of 4 Steinberg Media Technologies GmbH June 2005
As the development of Software is an ongoing process that gets closer
and closer to perfection without ever achieving it, we encourage you to
always make sure you are using the latest version of Hypersonic 2:
Download the proper install / update utility from the Support / Download
section at www.steinberg.net
Double-click the file, and follow the on-screen prompts to install / update
the appropriate version of Hypersonic 2 for your computer.
Additional Demos
Getting more information
Documentation Feedback
In your package are additional Demos of Steinberg products. To install
and use them please refer to the documentation found on the Demo
Media.
You’ll need to manually enter the printed Demo code found on the LCC
card in the Syncrosoft LCC center (download license). Then the Demo
license for the product you want to try out will be activated on the
Steinberg Key. The Demo versions usually can be started 100 times, it
will expire 30 days after activation of the license.
Don’t miss the valuable information and tutorials in the printed
Hypersonic 2 documentation. This information is also available as a PDF
directly from the Hypersonic 2 DVD in the Documentation folder.
Note: For viewing PDF files the Adobe Acrobat Reader is needed, which
can be found on the DVD in the Acrobat Reader folder.
For technical questions and discussions regarding Hypersonic 2, we
have provided a Forum to communicate with other users here:
http://www.cubase.net/
If you have suggestions for improving the Hypersonic 2 documentation,
we sure want to hear from you.
Please send your suggestions for enhancements, clarifications, or
corrections to steinberg-documentation@steinberg.de.
For avoiding spam any mail is filtered out that doesn’t begin with the
following subject: [Hypersonic 2-documentation]. Please make sure your
subject begins with this term so the mail can get thru to our
documentation team.
Technical Support
www.steinberg.net
Please note, in order to receive technical support and information,
Steinberg product specialists are also on hand to provide individual
assistance at:
you have to register your product online while or after Installing.
Hypersonic 2 – Read Me 2.0 5 of 5 Steinberg Media Technologies GmbH June 2005
Loading...