Operating Instructions
SG 105(w)/115(w)/125(w)/135(w) Rev. 3
Operating Instructions
Foreword
We are pleased to welcome you as a new customer of our Sophos SG appliances.
To install and configure the hardware appliance you can use the following documents:
ÌÌ Hardware Quick Start Guide: Connection to the system peripherals in a few steps
ÌÌ Operating Instructions: Notes on the security and commissioning of the hardware appliance
ÌÌ Administration Guide: Installing and configuring the software appliance
The Hardware Quick Start Guide and the Safety Instructions are also delivered in printed form together with the hardware appliance. The instructions must be read carefully prior to using the hardware and should be kept in a safe place.
You may download all user manuals and additional documentation from the support webpage at: sophos.com/support
Security Symbols
The following symbol and its meaning appears in the Hardware Quick Start Guide, Safety Instructions and in these Operating Instructions.
Caution and Important Note. If these notes are not correctly observed:
ÌÌ This is dangerous to life and the environment
ÌÌ The appliance may be damaged
ÌÌ The functions of the appliance will be no longer guaranteed
ÌÌ Sophos shall not be liable for damages arising from a failure to comply with the Safety Instructions
Designed Use
The hardware appliances are developed for use in networks.
The SG 105(w)/115(w)/125(w)/135(w) models may be operated as a standalone appliance. The hardware appliance can be used in commercial, industrial and residential environments.
The SG 105(w)/115(w)/125(w)/135(w) models belong to the appliance group B.
The hardware appliance must be installed pursuant to the current installation notes. Otherwise failure-free and safe operation cannot be guaranteed. The EU declaration of conformity is available at the following address:
Sophos Technology GmbH Amalienbadstr. 41/Bau 52 76227 Karlsruhe Germany
SG 105(w)/115(w)/125(w)/135(w) Rev. 3 |
1 |
Operating Instructions
CE Labeling, FCC and Approvals
The SG 105(w)/115(w)/125(w)/135(w) appliances comply with CB, CE, FCC
Class B, ISED, VCCI, RCM, UL, CCC, and BIS.
Important Note: For computer systems to remain CE and FCC compliant, only CE and FCC compliant parts may be used. Maintaining CE and FCC compliance also requires proper cable and cabling techniques.
Operating Elements and Connections
SG 105(w)/115(w)* (Rev. 3)
Status LEDs
(w-model has additional Wi-Fi LED)
2 x external antenna (SG 105w and SG 115w only)
Connector for optional 2nd redundant power supply
1 x |
1 x COM |
1 x GbE SFP |
4 x GbE |
HDMI |
(RJ45) |
(shared) |
copper port |
Power Supply |
2 x |
1 x Micro |
|
USB 2.0 |
USB |
SG 125(w)/135(w)* (Rev. 3)
Status LEDs
(w-model has additional Wi-Fi LED)
3 x external antenna
(SG 125w and SG 135w only)
1 x Micro
USB
1 x COM (RJ45)
Power
Supply
1 x |
2 x |
1 x GbE |
8 x GbE |
Expansion bay |
HDMI |
USB 2.0 |
SFP |
copper port |
(shown with optional |
module incl. 2 antennas)
Optional 2nd redundant power supply
*The displayed front images are of the SG 115 and 135 device. The displayed back images are of the SG 115w device and the SG 135w. Devices may vary slightly.
SG 105(w)/115(w)/125(w)/135(w) Rev. 3 |
2 |