Sony XR-C5300RX, XR-4300, XR-C5300RV, XR-C5200, XR-4300R User Manual

...

FM/MW/LW

3-044-359-12 (1)

FM/MW/LW Cassette Car Stereo

Cassette Car Stereo

Operating Instructions Manual de instrucciones Bruksanvisning Manual de instruções

For installation and connections, see the supplied installation/connections manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar. Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

XR-C5300RX XR-4300RX XR-C5300RV XR-4300RV XR-C5300R XR-4300R XR-C5200R XR-4200R

 2000 Sony Corporation

Welcome !

Precautions

Thank you for purchasing this Sony Cassette Player. This unit lets you enjoy a variety of features using the following controller accessory:

Optional accessory

Rotary commander RM-X4S Card remote commander RM-X91 (XR-C5300RX/C5300RV/C5300R/C5200R/ 4300RX/4300RV/4300R only)

XR-C5300RX/C5300RV/C5300R/C5200R only:

In addition to the cassette playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc*2.

*1You can connect a CD changer, an MD changer,

a CD player, or an MD player.

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name, and track names. This information is recorded on the disc.

• If your car was parked in direct sunlight

resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to the centre position.

• When a tape is played back for a long

period, the cassette may become warm because of the built-in power amplifier. However, this is not a sign of malfunction.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

To maintain high quality sound

If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether. Cassette cleaning kits cannot remove sugar from the tape heads.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the tape, use a pencil or similar object to turn the reel and take up any slack.

Slack

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes. Remove or replace loose labels.

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is not recommended except for long continuous play. The tape used for these cassettes is very thin and tends to stretch easily. Frequent playing and stopping of these tapes may cause them to become entangled in the cassette deck mechanism.

• The sound may become distorted while

playing the cassette. The cassette player head should be cleaned after each 50 hours of use.

Table of Contents

This Unit Only

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 7

Detaching the front panel .................................. 7

Turning the unit on/off ...................................... 8

How to use the menu ......................................... 8

Setting the clock .................................................. 9

Cassette Player

Listening to a tape ............................................. 10

Playing a tape in various modes ......................11

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) .................. 12

Memorising only the desired stations............ 12

Receiving the memorised stations .................. 13

RDS

Overview of the RDS function ........................ 14

Displaying the station name............................ 14

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 15

Listening to traffic announcements ................ 16

Presetting the RDS stations with the AF and

TA data .......................................................... 17

Locating a station by programme type .......... 18

Setting the clock automatically ....................... 19

With Optional Equipment

CD/MD Unit (XR-C5300RX/ C5300RV/C5300R/C5200R only)

Playing a CD or MD ......................................... 23

Playing tracks repeatedly

— Repeat Play .............................................. 25

Playing tracks in random order

— Shuffle Play .............................................. 25

Other Functions

Labelling the rotary commander .................... 19

Using the rotary commander .......................... 20

Adjusting the sound characteristics ............... 21

Attenuating the sound ..................................... 21

Changing the sound and display settings ..... 22

Boosting the bass sound

— D-bass ....................................................... 23

Additional Information

Maintenance....................................................... 26

Dismounting the unit ....................................... 27

Specifications ..................................................... 28

Troubleshooting guide ..................................... 29

Location of controls

PTY

SOUND

OFF

SOURCE

DSPL

MODE

SEEK/AMS

ENTER

–

Refer to the pages listed for details.

1 MENU button

9, 11, 12, 13, 15, 17, 19, 22, 24

2 Volume control dial 3 SOURCE (TUNER/TAPE/CD*1/MD*1)

button 8, 10, 12, 13, 16, 23

4 XR-C5300RX/C5300RV/C5300R/C5200R:

PRST/DISC +/– (cursor up/down) buttons 8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24

XR-4300RX/4300RV/4300R/4200R: PRST +/– (cursor up/down) buttons 8, 9, 11, 12, 13, 15, 17, 18, 19, 22, 24

During radio reception:

Preset stations select 13

During CD/MD playback*1:

Disc change 25

5 DSPL/PTY (display mode change/

programme type) button 11, 14, 18, 23, 24

6 MODE button 10, 11, 12, 13, 23

During tape playback:

Playback direction change 10

During radio reception:

BAND select 12

During CD/MD playback*1:

CD/MD unit select 23

7 Display window 8

Z (eject) button (located on the front side of the unit behind the front panel) 10

9 OPEN button 7, 10, 26 q; D-BASS button 23 qa SOUND button 21 qs OFF button*2 7, 8, 10

OPEN

D-BASS

REP SHUF

1 2 3 4 56

qd Reset button (located on the front side

of the unit behind the front panel) 7

qf SEEK/AMS –/+ (cursor left/right) buttons

8, 9, 10, 11, 12, 13, 15, 17, 19, 21, 22, 24, 25

Seek 13, 15 Automatic Music Sensor 10, 25 Manual search 13, 25

qg ENTER button

9, 11, 12, 13, 15, 17, 18, 19, 22, 24

qh Receptor for the card remote

commander*

qj Number buttons

During radio reception:

Preset number select 12, 13, 16, 17

During tape playback:

(1) REP 11

During CD/MD playback*1:

(1) REP 25 (2) SHUF 25

qk AF button 15, 17 ql TA button 16, 17

*1XR-C5300RX/C5300RV/C5300R/C5200R

only

*2Warning when installing in a car

without ACC (accessory) position on the ignition key switch

Be sure to press (OFF) on the unit for two seconds to turn off the clock display after turning off the engine.

When you press (OFF) only momentarily, the clock display does not turn off and this causes battery wear.

*3XR-C5300RX/C5300RV/C5300R/C5200R/

4300RX/4300RV/4300R only

Optional Card remote commander RM-X91

The corresponding buttons of the card remote commander control the same functions as those on this unit.

1 OFF button 2 MENU button 3 SOURCE button 4 SEEK/AMS (cursor </,) button 5 SOUND button 6 DSPL/PTY button 7 ATT button 8 LIST button (Not available for this model) 9 DISC/PRST (cursor M/m) button q; ENTER button qa MODE button qs VOL button

DISC

SOURCE

DISC

OPEN/CLOSE

ENTER

VOLATT

OFF

MENU LIST

SEEK SEEK

SOUND

DSPL MODE

A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the unit first.

Replacing the lithium battery

When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery.

+ side up

Notes on lithium battery

•Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a good contact.

•Be sure to observe the correct polarity when installing the battery.

•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

WARNING

Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

Getting Started

Attaching the front panel

Place the hole A of the front panel onto the spindle B on the unit as illustrated, then push the left side in.

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen.

Reset button

Note

Pressing the reset button will erase the clock setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to protect the unit from being stolen.

1 Press (OFF). 2 Press (OPEN), then slide the front panel

to the right side, and pull out from the left side.

Notes

• Be careful not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature.

Notes

• Be sure not to drop the panel when detaching it from the unit.

• If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged.

• When you carry the front panel with you, use the supplied front panel case.

Caution alarm

If you turn the car ignition off without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated.

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert a cassette in the unit. For details on operation, refer to page 10 (cassette player) and page 12 (radio).

Turning off the unit

Press (OFF) to stop tape playback or FM/ MW/LW reception (the key illumination and display remains on.) Press (OFF) for two seconds to completely turn off the unit.

Note

If your car has no ACC position on the ignition key switch, be sure to turn the unit off by pressing (OFF) for two seconds to avoid car battery wear.

How to use the menu

This unit is operated by selecting items from a menu. To select, first enter the menu mode and choose up/down (+/– of (PRST/DISC) or

(PRST)), or choose left/right (–/+ of (SEEK/AMS)).

(PRST/DISC)/(PRST)

(+) : To select upwards

SOURCE

(–) : To select downwards

(SEEK/AMS)

(–) : To select

leftwards

SOURCE

(+) : To select

rightwards

Setting the clock

The clock uses a 24-hour digital indication.

2 Press (ENTER).

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(PRST/DISC) or (PRST) repeatedly until

“CLOCK” appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (PRST/DISC) or

(PRST) to set the hour.

3 Press (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (PRST/DISC) or

(PRST) to set the minute.

The clock starts.

After the clock setting is complete, the display returns to normal playback mode.

Tips

• You can use the convenient CT function to set the clock automatically (page 19).

• When the D.INFO mode is set to ON, the time is always displayed (page 22).

Cassette Player

Fast-winding the tape

During playback, press and hold either side of (SEEK/AMS).

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, to start playback, press (SOURCE) repeatedly until “FWD” or “REV” appears.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press (MODE) (o).

To Press

Stop playback (OFF) Eject the cassette (OPEN) then Z

Rewind

SOURCE

Fast-forward

To start playback during fast-forwarding or rewinding, press (MODE) (o).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip.

You can skip up to nine tracks at one time.

To locate preceding tracks

Note

The AMS function may not work when: — the blanks between tracks are shorter than

four seconds

— there is noise between tracks — there are long sections of low volume or quiet

sections.

SOURCE

In the Motion Display mode, all the items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 22.)

To locate succeeding tracks

Playing a tape in various

DSPL

modes

You can play the tape in various modes:

•REP (Repeat Play) repeats the current track.

•METAL (Metal)* lets you play a metal or

CrO2 tape.

•BL SKP (Blank Skip) skips blanks longer than eight seconds.

•ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding the tape.

1 During playback, press (MENU). 2 Press either side of (PRST/DISC) or

(PRST) repeatedly until the desired item appears.

Each time you press (–) side of (PRST/DISC) or (PRST), the item changes as follows:

METAL*t BL SKP t ATA * XR-C5300RX/C5300RV/C5300R/C5200R/4300RX/

4300RV/4300R only

Playing tracks repeatedly

— Repeat Play

During playback, press (1) (REP) repeatedly until “REP-ON” in the display appears.

REP-ON y REP-OFF

MODE

SEEK/AMS

ENTER

Repeat Play starts.

To return to normal playback mode, select “REP-OFF.”

Tip

During repeat playback, press (MODE). “REP” disappears from the display and repeat mode is cancelled.

REP SHUF

1 2 3 4 56

3 Press (+) side of (SEEK/AMS) to select

“ON.”

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select “OFF” in step 3.

Tip

While the ATA function is activated, the display (TAPE y TUNER) can be changed by pressing (DSPL/PTY) or (DSPL).

Radio

Memorising stations automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals and memorises them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source changes as follows:

B TUNER B CD* B MD* B TAPE

* If the corresponding optional equipment is

not connected, this item will not appear (XR-C5300RX/C5300RV/C5300R/C5200R only).

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band changes as follows:

B FM1 B FM2 B FM3 B MW B LW

Memorising only the desired stations

You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 6 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on the number button.

4 Press the desired number button ((1) to

(6)) until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

3 Press (MENU), then press either side of

(PRST/DISC) or (PRST) repeatedly until

“BTM” appears.

4 Press (ENTER).

The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting.

• When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

Receiving the memorised stations

1 Press (SOURCE) repeatedly to select the

tuner.

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press either side of (PRST/DISC) or (PRST) repeatedly until “MONO” appears.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (PRST/DISC) or (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function).

If you cannot tune in a preset station

Press either side of (SEEK/AMS) to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (PRST/DISC) or (PRST) repeatedly until “LOCAL” (local seek

mode) is displayed. Then press (+) side of (SEEK/AMS) to select “LOCAL-ON.” Press (ENTER). During local reception and station selection, “L.SEEK” appears in the display. Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).

2 Press (+) side of (SEEK/AMS) until

“MONO-ON“ appears.

The sound improves, but becomes monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select “MONO-OFF” in step 2.

In the Motion Display mode, all the items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 22.)

RDS

Overview of the RDS function

Radio Data System (RDS) is a broadcasting service that allows FM stations to send additional digital information along with the regular radio programme signal. Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type.

Notes

• Depending on the country or region, not all of the RDS functions are available.

• RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data.

Displaying the station name

Changing the display item

Each time you press (DSPL/PTY), the item changes as follows:

Station name* (Frequency) y Programme type * When you tune in an FM station that transmits

RDS data, the station name appears.

In the Motion Display mode, all the items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 22.)

The name of the current station lights up in the display.

Select an FM station (page 12).

When you tune in an FM station that transmits RDS data, the station name appears in the display.

Notes

• The “*” indication means that an RDS station is being received.

•“NO NAME” appears if the received station does not transmit RDS data.

Retuning the same programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function automatically selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually.

Frequencies change automatically.

98.5MHz

Station

1 Select an FM station (page 12). 2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative station with a stronger signal in the same network.

Note

When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF) repeatedly until “AF-OFF” appears.

96.0MHz

102.5MHz

Changing the display item

Each time you press (AF), the item changes as follows:

AF-ON y AF-OFF

Notes

• When “NO AF” and the station name flash alternately, it means that the unit cannot find an alternative station in the network.

• If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press either side of (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI SEEK” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the previously selected frequency.

Listening to a regional programme

The “REG-ON” (regional on) function lets you stay tuned to a regional programme without being switched to another regional station. (Note that you must turn the AF function on.) The unit is factory preset to “REG-ON,” but if you want to turn off the function, do the following.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC) or (PRST) repeatedly until “REG” appears.

2 Press (+) side of (SEEK/AMS) until

“REG-OFF” appears.

3 Press (ENTER).

Note that selecting “REG-OFF” might cause the unit to switch to another regional station within the same network.

To return to regional on, select “REG-ON” in step 2.

Note

This function does not work in the United Kingdom and in some other areas.

continue to next page t

Local link function (United Kingdom only)

The Local Link function lets you select other local stations in the area, even if they are not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

To cancel the current traffic announcement

Press (TA) or (SOURCE).

To cancel all traffic announcements, turn off the function by pressing (TA) until “TA-OFF” appears.

Presetting the volume of traffic announcements

You can preset the volume level of the traffic announcements beforehand so you won’t miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level.

1 Select the desired volume level.

Listening to traffic announcements

The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even if you are listening to other programme sources.

Press (TA) repeatedly until “TA-ON” appears.

The unit starts searching for traffic information stations. “TP” appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, “TA” flashes. The flashing stops when the traffic announcement is over.

Tip

If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over.

Notes

“NO TP” flashes for five seconds if the received

•

station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts it.

• When “EON” appears with “TP” in the display, the current station makes use of broadcast traffic announcements by other stations in the same network.

2 Press (TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency announcements

If an emergency announcement comes in while you are listening to the radio, the programme will automatically switch to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter which source you are listening to at the time.

Presetting the RDS stations with the AF and TA data

When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations.

Presetting the same setting for all preset stations

1 Select an FM band (page 12). 2 Press (AF) and/or (TA) to select “AF-ON”

and/or “TA-ON.”

Note that selecting “AF-OFF” or “TA-OFF” stores not only RDS stations, but also non-RDS stations.

3 Press (MENU), then press either side of

(PRST/DISC) or (PRST) repeatedly until

“BTM” appears.

4 Press (+) side of (SEEK/AMS) until “BTM”

flashes.

Presetting different settings for each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF) and/or (TA) to select “AF-ON”

and/or “TA-ON.”

3 Press the desired number button and

hold until “MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off.

5 Press (ENTER).

Locating a station by programme type

You can locate the station you want by selecting one of the programme types shown below.

Programme types Display

News NEWS Current Affairs AFFAIRS Information INFO Sports SPORT Education EDUCATE Drama DRAMA Culture CULTURE Science SCIENCE Varied VARIED Popular Music POP M Rock Music ROCK M Easy Listening EASY M Light Classical LIGHT M Classical CLASSICS Other Music Type OTHER M Weather WEATHER Finance FINANCE Children’s Programmes CHILDREN Social Affairs SOCIAL A Religion RELIGION Phone In PHONE IN Travel TRAVEL Leisure LEISURE Jazz Music JAZZ Country Music COUNTRY National Music NATION M Oldies Music OLDIES Folk Music FOLK M Documentary DOCUMENT Not specified NONE

1 Press (DSPL/PTY) during FM reception

until “PTY” appears.

The current programme type name appears if the station is transmitting the PTY data. “- - - - -” appears if the received station is not an RDS station, or if the RDS data has not been received.

2 Press either side of (PRST/DISC) or

(PRST) repeatedly until the desired

programme type appears.

The programme types appear in the order shown in the above table. Note that you cannot select “NONE” (Not specified) for searching.

3 Press (ENTER).

The unit starts searching for a station broadcasting the selected programme type.

Note

You cannot use this function in some countries where no PTY (Programme Type selection) data is available.

Setting the clock automatically

Other Functions

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC) or (PRST) repeatedly until “CT” appears.

2 Press (+) side of (SEEK/AMS) repeatedly

until “CT-ON” appears.

The clock is set.

3 Press (ENTER) to return to the normal

display.

To cancel the CT function

Select “CT-OFF” in step 2.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

You can also control this unit with the rotary commander.

Labelling the rotary commander

Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below.

SOUND

MODE

DSPL

MODE

SOUND

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

XR-C5300RX/C5300RV/C5300R/C5200R only:

You can also control the optional CD or MD units with the rotary commander.

By rotating the control (the SEEK/AMS control)

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER t CD* t MD* t TAPE

Pressing (MODE) changes the operation in the following ways;

• Tuner : FM1 t FM2 t FM3 t MW

• Tape : playback direction

• CD unit* : CD1 t CD2 t …

• MD unit* : MD1 t MD2 t …

* If the corresponding optional equipment is

not connected, the item will not appear (XR-C5300RX/C5300RV/C5300R/C5200R only).

t LW

Rotate the control and release it to:

•Locate the beginnings of tracks on the tape. Rotate and hold the control, and release it to fast-wind the tape. To start playback while fast-winding the tape, press (MODE).

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorised on the number buttons.

•Change the disc.

Other operations

Rotate the VOL control to adjust the volume.

Press (ATT) to attenuate the sound.

OFF

Press (OFF) to turn off the unit.

Note

When installing in a car without ACC (accessory) position on the ignition key switch, press (OFF) for two seconds to turn off the clock display after turning off the engine.

Press (SOUND) to adjust the volume and sound menu.

Press (DSPL) to change the displayed items.

Tip

While the ATA function is activated, the display (TAPE y TUNER) can be changed by pressing (DSPL).

Changing the operative direction

The operative direction of controls is factoryset as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

Each time you press (SOUND), the item changes as follows:

BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear)

2 Adjust the selected item by pressing

either side of (SEEK/AMS).

When adjusting with the rotary commander, press (SOUND) and rotate the VOL control.

Note

Adjust within three seconds after selecting the item.

Attenuating the sound

Press (ATT) on the rotary commander or card remote commander.

“ATT-ON” flashes momentarily.

Press (SOUND) for two seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (see “Changing the sound and display settings” on page 22).

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). (XR-C5300RX/C5300RV/C5300R/4300RX/4300RV/ 4300R only)

Changing the sound and display settings

The following items can be set:

•CLOCK (page 9).

•CT (Clock Time) (page 19).

•BEEP – to turn the beep sound on or off.

•RM (Rotary Commander) – to change the

operative direction of the rotary commander. — Select “NORM” to use the rotary

commander as the factory-set position.

— Select “REV” when you mount the rotary

commander on the right side of the steering column.

•D.INFO (Dual Information)*1 – to display the clock and the play mode simultaneously (ON), or to display the information alternately (OFF).

•AMBER/GREEN*2 – to change the illumination colour to amber or green.

•DIMMER*3 – to change the brightness of the display.

— Select “ON” to dim the display. — Select “OFF” to deactivate Dimmer.

•M.DSPL (Motion Display) – to turn the

motion display on or off.

•A.SCRL (Auto Scroll)*4 (page 24).

1 Press (MENU). 2 Press either side of (PRST/DISC) or

(PRST) repeatedly until the desired item appears.

Each time you press (–) side of (PRST/DISC) or (PRST), the item changes as follows:

CLOCK t CT t BEEP t RM t D.INFO*1 t AMBER/GREEN*2 t DIMMER*3 t M.DSPL t

A.SCRL* *1When the radio is off, or when no tape, CD,

or MD is playing, this item will not appear.

*2XR-C5300R/C5200R/4300R/4200R only

XR-C5300RV/4300RV only

When no CD or MD is playing, this item will not appear (XR-C5300RX/C5300RV/C5300R/ C5200R only).

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET”, “DIS”and “P/M”) by pressing an holding either side

of (PRST/DISC) or (PRST) for two seconds.

3 Press (+) side of (SEEK/AMS) to select the

desired setting (Example: ON or OFF).

4 Press (ENTER).

After the mode setting is complete, the display returns to normal playback mode.

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button.

D.BASS-3

Level

0dB

Adjusting the bass curve

D.BASS-1 t D.BASS-2 t D.BASS-3 t D.BASS-OFF (cancel)

Note

The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve.

D.BASS-2

D.BASS-1

Frequency (Hz)

D.BASS-3 D.BASS-2 D.BASS-1

Press (D-BASS) repeatedly to select the desired bass curve.

As the D-BASS number increases so does the effect.

With Optional Equipment

CD/MD Unit (XR-C5300RX/

C5300RV/C5300R/C5200R only)

This unit can control external CD/MD units. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select CD

or MD.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the tracks play from the beginning.

Changing the display item

Each time you press (DSPL/PTY) during CD, CD TEXT, or MD playback, the item changes as follows:

Elapsed playback time

Disc name*

/Artist name*

Track name*

FM1 frequency*

continue to next page t

If you have not labelled the disc or if there is no

disc name prerecorded on the MD, “DISC” and “NO NAME” appears in the display.

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)

If the track name of a CD TEXT disc or MD is not

prerecorded, “TRACK” and “NO NAME” appears in the display.

While the AF/TA function is activated.

After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 22.)

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows:

• The disc name appears when the disc has changed (if the disc name is selected).

• The track name appears when the track has changed (if the track name is selected).

If you press (DSPL/PTY) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off.

1 During playback, press (MENU). 2 Press either side of (PRST/DISC) or

(PRST) repeatedly until “A.SCRL” appears.

3 Press (+) side of (SEEK/AMS) to select

“A.SCRL-ON.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.SCRL-OFF” in step 3.

Note

For some discs with very many characters, the following cases may happen:

— Some of the characters are not displayed — Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip.

Playing tracks repeatedly

— Repeat Play

You can select:

•REP-1 – to repeat a track.

•REP-2 – to repeat a disc.

SOURCE

To locate preceding tracks

To locate succeeding tracks

Locating a specific point in a track

— Manual Search

During playback, press and hold either side of (SEEK/AMS). Release when you have found the desired point.

SOURCE

To search backward

To search forward

Switching to other discs

During playback, press either side of (PRST/DISC) or (PRST).

The desired disc in the current unit begins playback.

SOURCE

For succeeding discs

For preceding discs

During playback, press (1) (REP) repeatedly until the desired setting appears.

B REP-1 B REP-2

REP-OFF b

Repeat Play starts.

To return to normal playback mode, select “REP-OFF.”

Playing tracks in random order — Shuffle Play

You can select:

•SHUF-1 – to play the tracks on the current

disc in random order.

•SHUF-2 – to play the tracks in the current

unit in random order.

•SHUF-ALL* – to play all the tracks in all the

units in random order.

During playback, press (2) (SHUF) repeatedly until the desired setting appears.

B SHUF-1 B SHUF-2

SHUF-OFF b SHUF-ALL* b

Shuffle Play starts.

Track number

Disc number

Elapsed playback time

* “SHUF-ALL” is only available when you

connect two or more optinal CD/MD units.

To return to normal playback mode, select “SHUF-OFF.”

Additional Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing (OPEN), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front panel

Notes

• For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch.

• Never touch the connectors directly with your fingers or with any metal device.

Dismounting the unit

1 Press the clip inside the front cover with

a thin screwdriver, and pry the front cover free.

2 Repeat step 1 on the left side.

The front cover is removed.

3 Use a thin screwdriver to push in the clip

on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting.

4 Repeat step 3 on the right side.

5 Slide the unit out of the mounting.

Specifications

Cassette player section

Tape track 4-track 2-channel stereo Wow and flutter 0.08 % (WRMS) Frequency response 30 – 18,000 Hz Signal-to-noise ratio

Cassette type

TYPE II, IV* TYPE I 58 dB

61 dB

Tuner section

Tuning range 87.5 – 108.0 MHz Aerial terminal External aerial connector Intermediate frequency 10.7 MHz/450kHz Usable sensitivity 8 dBf Selectivity 75 dB at 400 kHz Signal-to-noise ratio 66 dB (stereo),

Harmonic distortion at 1 kHz

Separation 35 dB at 1 kHz Frequency response 30 – 15,000 Hz

MW/LW

Tuning range MW: 531 – 1,602 kHz

Aerial terminal External aerial connector Intermediate frequency 10.7 MHz/450 kHz Sensitivity MW: 30 µV

72 dB (mono)

0.6 % (stereo),

0.3 % (mono)

LW: 153 – 279 kHz

LW: 40 µV

General

Outputs Audio output

Tone controls Bass ±9 dB at 100 Hz

Power requirements 12 V DC car battery Dimensions Approx. 178 × 50 × 183 mm Mounting dimensions Approx. 182 × 53 × 162 mm

Mass Approx. 1.2 kg Supplied accessories Parts for installation and

Optional accessories Rotary commander

Optional equipment CD changer (10 discs)

Power aerial relay control lead Power amplifier control lead Telephone ATT control

lead*

Treble ±9 dB at 10 kHz

(negative earth)

(w/h/d)

connections (1 set) Front panel case (1)

RM-X4S Card remote commander

RM-X91* BUS cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m)

CDX-828, CDX-737

MD changer (6 discs)

MDX-65 Other CD/MD units with the Sony-BUS system Source selector

XA-C30

Power amplifier section

Outputs Speaker outputs

Speaker impedance 4 – 8 ohms Maximum power output 50 W × 4 (at 4 ohms)

(sure seal connectors)

XR-C5300RX/C5300RV/C5300R/C5200R/4300RX/

4300RV/4300R only

*2XR-C5300RX/C5300RV/C5300R/4300RX/4300RV/

4300R only

Design and specifications are subject to change without notice.

Troubleshooting guide

The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connections and operating procedures.

General

Problem

No sound.

The contents of the memory have been erased.

Indications do not appear in the display.

Tape playback

Problem

The sound is distorted.

The AMS does not operate correctly.

Cause/Solution

•Cancel the ATT function.

•Set the fader control to the centre position for two-speaker

systems.

•Rotate the dial clockwise to adjust the volume.

• The power cord or battery has been disconnected.

• The reset button was pressed.

t Store again into the memory.

Remove the front panel and clean the connectors. See “Cleaning the connectors” (page 26) for details.

Cause/Solution

The tape head is contaminated. t Clean the head with a commercially available dry-type

cleaning cassette.

• There is noise in the space between tracks.

• A blank space is too short (less than four seconds).

• A long pause, or a passage of low frequencies or very low

sound level is treated as a blank space.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not possible.

The stations cannot be received. The sound is hampered by noises.

The “ST” indication flashes.

Cause/Solution

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

•The broadcast signal is too weak.

t Use manual tuning.

•The local seek mode is set to ON.

t Set the local seek mode to OFF (page 13).

Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s aerial booster. (When your car has built-in FM/MW/LW aerial in the rear/side glass only.)

•Tune in the frequency accurately.

•The broadcast signal is too weak.

t Set to MONO mode (page 13).

continue to next page t

RDS

Problem

The SEEK starts after a few seconds of listening.

No traffic announcements.

PTY displays “NONE.”

Cause/Solution

The station is non-TP or has a weak signal.

t Press (AF) or (TA) repeatedly until “AF-OFF” or

“TA-OFF” appears.

•Activate “TA.”

•The station does not broadcast any traffic announcements

despite being TP. t Tune to another station.

The station does not specify the programme type.

CD/MD playback (XR-C5300RX/C5300RV/C5300R/C5200R only)

Problem

The sound skips.

Cause/Solution

A dirty or defective disc.

+ 92 hidden pages