Sony SWR30 Users guide
User guide
SmartBand Talk
SWR30
Contents
Basics.............................................................................................3
Introduction.......................................................................................3
Hardware overview...........................................................................3
Understanding the display............................................................... 4
Interacting with the SmartBand Talk................................................4
Charging your SmartBand Talk.........................................................4
Assembly...........................................................................................5
Turning on and o............................................................................ 6
Still mode.......................................................................................... 6
Setting up your SmartBand Talk................................................... 7
Preparing to use your SmartBand Talk.............................................7
Reconnecting your SmartBand Talk................................................. 8
Resetting your SmartBand Talk........................................................ 8
Settings for your SmartBand Talk................................................. 9
Using the SmartBand Talk application............................................. 9
Controlling applications with your SmartBand Talk.........................9
SmartBand Talk alarm..................................................................... 10
Notifications..................................................................................... 11
Handling calls.................................................................................. 13
Do not disturb..................................................................................13
Power management........................................................................14
Wearing style...................................................................................14
Display colour.................................................................................. 15
Sleep tracking..................................................................................15
Google Fit........................................................................................ 15
Voice search.....................................................................................16
Locating your SmartBand Talk........................................................ 16
Selecting a watch face for your SmartBand Talk............................16
Logging your activities using the Lifelog application.................18
Using the Lifelog application.......................................................... 18
Setting goals................................................................................... 20
Logging sleep with your SmartBand Talk...................................... 20
Synchronising data with the Lifelog application........................... 20
Important information................................................................ 22
Using your SmartBand Talk in wet and dusty conditions.............. 22
Legal information............................................................................23
2
Basics
Introduction
The SmartBand Talk is both a standalone device as well as a companion product
that connects wirelessly via Bluetooth® with Android™ smartphones and tablets.
Worn on your dominant wrist, it can monitor your body movements and interact
with your Android™ device to generate data about your daily life and habits. For
example, the SmartBand Talk counts your steps and records data about your
physical state while you sleep, walk or run. Together with the Lifelog
application, you can set personal goals and then track your progress in a
comprehensive and easily viewable format.
The accessory also helps you to stay organised and manage common day-to-day
tasks. For example, you can use it to handle alarms, phone calls and text
messages. And with dozens of applications available for your SmartBand Talk on
Google Play™, you can add new features regularly.
Before you can get started using your SmartBand Talk, you must download the
SmartBand Talk application and set up the accessory to work with your phone or
tablet. Refer to the relevant setup information for more details. Also, remember
that your Android™ device must run the Android™ software version 4.4 or higher
and support the Bluetooth® version 3.0 profile.
Hardware overview
1
2 Wristband strap 1
3 Volume key
4 NFC detection area
5 Power key/Function key
6 Wristband strap 2
7 Microphone
8 Micro USB port
9 Core unit
10 Speakers
11 Attachment clips
Screen
This is an Internet version of this publication. © Print only for private use.
3
Understanding the display
Your SmartBand Talk features an E Ink® display that uses electronic ink technology
to reproduce the appearance of ordinary ink on paper. In an E Ink® display, no
backlight is used. Instead, ambient light from the environment is reflected from
the surface of the display, making it more comfortable to read. The image on your
E Ink® screen is retained even when power to the screen is turned o. Also note
that when the content displayed on the screen changes, there is a brief transition
time. This is normal E Ink® display behavior.
Interacting with the SmartBand Talk
You can control applications by firmly tapping the SmartBand Talk and you can
navigate from screen to screen by pressing the function key. If the screen is idle for
30 seconds, the idle mode screen becomes active.
Tapping
• Handle installed applications, for example, add bookmarks.
The display of the SmartBand Talk is not touch sensitive. Remember to firmly tap the
SmartBand Talk in order for the device to register a command. Also note that the screen
does not recognise swiping movements.
Function key
You can use the function key to navigate between dierent screens and
applications.
To navigate from one screen to another
• Short press the function key.
To exit an application
• Long press the function key. After the application closes, the idle mode
screen becomes active.
Charging your SmartBand Talk
Before using your SmartBand Talk for the first time, you need to charge it for
approximately 30 minutes. Sony chargers are recommended.
If your SmartBand Talk is not used during charging, it takes 45 to 70 minutes to
fully charge it depending on the type of charger used.
4
This is an Internet version of this publication. © Print only for private use.
To charge your SmartBand Talk
1 Plug one end of the USB cable into the charger or into the USB port of a
computer.
2 Plug the other end of the cable into the Micro USB port of your SmartBand
Talk.
If you are charging the device for the first time, make sure you charge it for at least 30
minutes.
To check the battery level of your SmartBand Talk
• From the main application screen of your Android™ device, find and tap
SmartBand Talk > STATUS.
Low battery level notification
When your SmartBand Talk is on and the battery level goes below 15 percent, it
emits one short vibration and a warning notification appears on the screen to
indicate that the battery is low. The warning gets repeated when the battery
reaches charge levels of 10 and 5 percent, respectively.
displays permanently on
your SmartBand Talk when the battery runs out of power, indicating that you need
to charge it.
To dismiss a battery warning notification
• Short press the function key.
Assembly
To personalise your SmartBand Talk, you can replace the wristband with bands of
dierent colour and length, which can be purchased separately.
When you change the wristband, you may also have to replace the attachment clips with
clips of a suitable size or type.
5
This is an Internet version of this publication. © Print only for private use.
To remove the wristband
1 Insert a fingernail, or a similar object, into the gap near each attachment
clip, then drag out and fully remove the clips.
2 Remove the wristband straps from the core unit of the accessory.
Turning on and o
To turn on your SmartBand Talk
• Press and hold down the power key until the device vibrates.
To turn o your SmartBand Talk
• Press and hold down the power key until your SmartBand Talk vibrates and
the screen goes blank.
Still mode
Your SmartBand Talk has a feature called Still mode. When your SmartBand Talk is
absolutely still and does not receive any notifications or calls for 20 minutes, it
enters Still mode and the screen goes blank. As soon as your SmartBand Talk is
moved or receives an incoming call or notification, it exits Still mode automatically.
Still mode is enabled on your SmartBand Talk by default and cannot be set or turned o.
6
This is an Internet version of this publication. © Print only for private use.
Setting up your SmartBand Talk
Preparing to use your SmartBand Talk
For your SmartBand Talk to work properly, you must install the latest version of the
SmartBand Talk application on the Android™ device, and then pair and connect it
with your Android™ device. You also need to install the Lifelog application, which
adds extra features and functions that allow you to, for example, see more detailed
information about your daily activities.
You can set up your SmartBand Talk using NFC, which launches the pairing,
connection and setup procedures automatically, or you can use the manual
Bluetooth® option which requires some extra steps, for example, to download and
install some necessary applications.
A setup wizard in the SmartBand Talk application guides you through the process
of setting up your SmartBand Talk for the first time.
All applications required for the SmartBand Talk to work are available on Google Play™.
To set up your SmartBand Talk using NFC
1 Make sure that your SmartBand Talk has been charged for at least 30
minutes.
2 Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
3 Place the Android™ device over your SmartBand Talk so that the NFC area of
each device touches the other.
permanently in the Notification panel when a connection with the
SmartBand Talk is active.
You can set up your SmartBand Talk using NFC even when the SmartBand Talk is turned o.
You can drag down the status bar to open the Notification panel and get quick access to
the SmartBand application and the Lifelog application.
appears briefly in the status bar and
7
This is an Internet version of this publication. © Print only for private use.
To set up your SmartBand Talk using Bluetooth®
1 Make sure that your SmartBand Talk has been charged for at least 30
minutes.
2 Android™ device: Make sure that you have installed or updated the
SmartBand Talk application to the latest version.
3 Turn on your SmartBand Talk.
4 Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth®
devices and select SWR30 in the list of available devices.
5 Android™ device: Follow the instructions that appear on the screen.
appears briefly in the status bar and permanently in the Notification panel
when a connection with the SmartBand Talk is active.
You can drag down the status bar to open the Notification panel and get quick access to
the SmartBand application and the Lifelog application.
To install the SmartBand Talk application
1 From the main application screen of your Android™ device, find and tap Play
Store to open the Google Play™ application.
2 Tap the search icon, then search for SmartBand Talk.
3 After the search results appear, tap SmartBand Talk, then follow the
relevant instructions to download and install the application.
You can only install the SmartBand Talk application on an Android™ device, for example,
an Android™ smartphone or tablet.
Reconnecting your SmartBand Talk
In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your SmartBand Talk automatically performs a series of
reconnection attempts. When this happens, you can use the function key to force
the accessory to try reconnecting, or you can use NFC to reconnect the two
devices.
To force the SmartBand Talk to try reconnecting
• Press the function key.
To reconnect your SmartBand Talk using NFC
1 Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2 Place the Android™ device over your SmartBand Talk so that the NFC
detection area of each device touches the other.
Resetting your SmartBand Talk
Reset your SmartBand Talk if it behaves unexpectedly or if you want to connect it
to a new device.
To perform a factory data reset
1 Turn o your SmartBand Talk.
2 Press and hold down the power key, volume up and down keys
simultaneously until you feel three short vibrations followed by one longer
vibration, then release the keys.
You need to pair the SmartBand Talk with your Android™ device again.
To force your SmartBand Talk to shut down
• Long press the power key.
8
This is an Internet version of this publication. © Print only for private use.
Loading...