Sony SCPH-55007GT User Manual

GB
MEMORY CARD slots MEMORY CARD(記憶卡)插口
English
” product family logo
CT
中文
”家族企業標誌
Instruction Manual
使用說明書
感謝您購買 PlayStation2 電腦娛樂系統­使用本機以前﹐請先詳細閱讀本說明書﹐並妥善保 存﹐以備將來參考之用-
1 (standby)/RESET button and 1 indicator
IR receiver
A (open) button and A indicator
Disc tray
Controller ports
USB connectors
L2 button, R2 button, L1 button, R1 button
Directional buttons
f button, a button, button, s button
START button
ANALOG mode button
1(預備)/RESET(再啟 動)按鈕和 1 顯示燈
紅外線接收器
A(打開)按鈕和 A 顯示燈
光碟托盤
控制器端子
USB 連接埠
L2 按鈕﹐R2 按鈕 L1 按鈕﹐R1 按鈕
方向按鈕
f 按鈕﹐a 按鈕﹐ 按鈕﹐s 按鈕
START(開始)按鈕
ANALOG(類比)方式開關
TM
SCPH-55007 GT
© 2003 Sony Computer Entertainment Inc. All rights reserved.
SELECT button
Left analog stick, right analog stick, L3 button, R3 button
SELECT(選擇)按鈕
左類比操作桿﹐ 右類比操作桿﹐ L3 按鈕﹐R3 按鈕
3-089-670-31(1)
2
WARNING
Precautions
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent fire or shock hazard, do not place a container filled with liquids on top of the console.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Caution
The use of optical instruments with this product will increase eye hazard. As the laser beam used in this unit is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
Read carefully before operating your PlayStation®2 console
A few people may experience epileptic seizures when viewing flashing lights or patterns in our daily environment. These persons may experience seizures while watching TV or playing video games, including DVD videos or games played on the PlayStation console. Players who have not had any seizures may nonetheless have an undetected epileptic condition. Consult your physician before operating the PlayStation console if you have an epileptic condition or experience any of the following symptoms while watching TV programs or playing video games: altered vision, muscle twitching, other involuntary movements, loss of awareness of your surroundings, mental confusion, and/ or convulsions.
Some PlayStation differently on the PlayStation the PlayStation the PlayStation PlayStation card for technical assistance.
format software titles may perform
®
console, or may not perform properly on
®
2 console. For more information, call the
®
service line number listed on your warranty
®
2 console than they did on
®
2
®
Safety
This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines:
• Observe all warnings, precautions and instructions.
Stop use immediately if the device functions in an abnormal manner, or produces unusual sounds or smells.
• Never connect cables of types other than those specified in this manual to the line connector. Connect only cables of the proper type for each connector.
• If the device does not operate properly, call the PlayStation warranty card for technical assistance.
® service line number listed on your
Use and handling
• Do not throw or drop the console or subject the item to strong physical shock.
Do not place the console on surfaces that are unstable, tilted or subject to vibration.
• Never move or change the position of a console while it is turned on.
• Do not expose the console to high temperatures, high humidity or direct sunlight (use in an environment where temperatures range 5°C – 35°C).
• Do not place the console in locations subject to sudden temperature change (e.g. temperature changes of 10°C per hour or more).
• Do not leave the console in a car with its windows closed (particularly in summer) as this may warp the product exterior or cause the product to malfunction.
• Do not use the console in a dusty location.
• Do not allow liquid or small particles to get into the console.
• Do not place the console close to magnetic fields such as those produced by magnets, loudspeakers or television sets.
• Do not put heavy objects on the console.
2
®
• Do not touch the metal parts or insert foreign objects into the connectors of the console.
• When you do not intend to use the console for an extended period of time, disconnect the power plug for the PlayStation outlet.
• When disconnecting the power plug from an electrical outlet, pull it out by grasping the plug. Never pull the cord itself.
• Do not place any rubber or vinyl materials on the exterior of the console for an extended period of time. Doing so may damage the plastic surface.
• To help prevent eye strain, take a break of about 15 minutes during every hour of play.
• Use only the supplied AC power cord.
Unplug all cords and cables before moving the console.
2 console from the electrical
®
Checking the AC power cord
To help ensure safe operation of this product, regularly inspect the AC power cord for wear and tear. If the cord is damaged, discontinue use immediately and call the PlayStation card for technical assistance.
® service line number listed on your warranty
Do not touch the connectors on the console
Do not touch the metal parts of, or insert foreign objects into, the connectors on the console.
Do not expose the console to cigarette smoke or dust
When setting up the PlayStation®2 console, avoid places subject to excessive cigarette smoke or dust. Cigarette smoke residue or dust build-up on internal components such as the lens, may cause the console to malfunction.
Cleaning the vents
Dust can accumulate in both the front and rear vents of the PlayStation time and remove any accumulated dust with a low­powered vacuum cleaner.
Disc handling
• Do not leave discs near a heat source, in direct sunlight, or in high humidity.
• Store discs in their cases when they are not being used. Stacking discs or standing them at an angle without putting them in their cases can cause the discs to warp.
• Do not touch the disc surface when handling a disc; hold it by the edges.
• Do not stick paper or tape onto the disc.
• Do not write on the disc with a marker, etc.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce sound quality. Always handle carefully and make sure discs are clean before use.
• Clean discs using a soft cloth, lightly wiping from the center outwards.
• Do not use solvents such as benzine, commercially available cleaners not intended for CDs or anti-static spray intended for vinyl LPs as these may damage your disc.
Moisture condensation
If the console or the disc is brought directly from a cold location to a warm one, moisture may condense on the lens inside the console or on the disc. Should this occur, the console may not operate properly. In this case, remove the disc and do not put the disc back in until the moisture evaporates. (This could take several hours.) If the console still does not operate properly, call the PlayStation warranty card for technical assistance.
Cleaning the console
For safety reasons, before cleaning the console, 1) turn off the PlayStation switch on the console rear and 2) disconnect the power plug from the electrical outlet.
• Do not use paint thinner, solvents or other chemicals to clean the exterior of the console, as these may damage the surface. When using a commercially available cleaning cloth, follow the instructions supplied with the cloth.
• If the exterior of the console becomes dirty, soak a soft cloth in a mild detergent solution diluted with water, tightly squeeze the cloth to remove the excess liquid, wipe the affected area of the exterior, and finish by wiping with a dry cloth.
2 console. Check the vents from time to
®
service line number listed on your
®
2 console using the main power
®
Discs that can be played with the PlayStation®2 console
3
Never disassemble the console
• Use your PlayStation®2 console according to the instructions in this manual. No authorization for the analysis or modification of the PlayStation nor the analysis and use of the product’s circuit configurations, is provided.
• There are no user-serviceable components inside the PlayStation void the warranty. Additionally, there is a risk of exposure to laser radiation as well as to electrical shock hazards.
Notes on safety when using the analog controller (DUALSHOCK
• Stop using the console immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms while operating the analog controller (DUALSHOCK consult a doctor.
• The analog controller (DUALSHOCK for use with the hands only. Do not bring it into close contact with your head, face or the bones of any other part of the body.
• The vibration function of the analog controller (DUALSHOCK the vibration function if you have any ailment or injury to the bones, joints or muscles of your hands or arms. Note that some PlayStation format software titles set the vibration function to “On” by default. In most cases, the vibration function can be set to “Off” in the options menu of the software. Do not play such titles using the analog controller (DUALSHOCK vibration function to “Off”.
• Avoid prolonged use of the analog controller (DUALSHOCK intervals.
* These notes also apply to the analog controller
(DUALSHOCK
2 console. Disassembling the console will
®
*
®2)
2). If the condition persists,
®
2) can aggravate injuries. Do not use
®
®
2) unless you have set the
®
2). Take a break at about 30 minute
®
).
®
2 console,
®
2) is intended
®
2 and PlayStation
Disc logo
Disc color
Contents
Disc size
PlayStation®2 format
DVD-ROM
”, PlayStation®2 logo
and
designation
Silver
Audio CDs
PlayStation®2 format
CD-ROM
”, PlayStation®2 logo
and
designation
Blue
Audio and video
12 cm
DVD videos
*3
PlayStation® format
PlayStation® logo and
DVD-RW (VR mode)
Disc logo
Contents
Disc size
®
*1 When you position the console vertically and play an 8 cm audio CD, use an optional adaptor. *2 When playing an 8 cm DVD video or DVD-RW disc, always place the console in the horizontal position. *3 The term “DVD videos” refers to DVD-VIDEO, DVD-R, DVD+R, DVD+RW discs as well as DVD-RW discs recorded in
Video mode.
DVD video systems and regional restrictions
•This console conforms to the NTSC broadcast standard. You cannot play discs recorded for other broadcast standards (such as PAL or SECAM) on this console.
•Some DVD VIDEOs are marked with region numbers such as 3. The number contained within the symbol represents the region number of DVD players on which the disc can be played. DVD VIDEOs that do not bear this symbol, or that do not display the number 3 cannot be played on your console.
•DVD VIDEOs with the played on this console. If you attempt to play any other DVD VIDEOs, a message stating “This disc cannot be played due to regional restrictions” will appear on the screen.
•Some DVD VIDEOs that have no region code markings may still be subject to area restrictions and may not be playable on the console.
Audio
12 cm 8 cm
ALL
label can also be
Audio and video
*1
12 cm
The “DVD VIDEO” and “DVD-RW” logos are trademarks.
8 cm
*2
Audio and video
12 cm
Notes on the playback of DVD-R/DVD-RW/ DVD+R/DVD+RW discs*
Some discs recorded using DVD-R/DVD-RW/ DVD+R/DVD+RW devices may not be playable due to scratches, dirt, dust, fingerprints or problems encountered during recording, or due to the state of the disc when the recording was made. Only discs that have been finalized (a process that concludes recording) after recording are playable. Video recorded on CPRM (Content Protection for Recordable Media) compatible DVD-RW discs using the copy-once capability, will not play that section of video, and the message "Playback is restricted. Cannot play." will be displayed. For details, refer to the instructions supplied with the DVD recording device. (CPRM is a copy protection system with scramble capability for recorded “copy-once” broadcast programs.)
* For details on each type of DVD media, refer to the
Glossary on page 28 of this instruction manual.
CD-ROM
designation
Black
8 cm
Irregularly shaped discs
Do not use irregularly shaped CDs or DVDs (for example, heart- or star-shaped discs) as
GB
Getting started
they may cause the console to malfunction.
Notes on playback operations of DVD video
• This console plays back DVD video as originally designed by the software producers. Some of the playback features of this console may not have been incorporated into the DVD video design. As a result some playback features may not be available with certain software. Refer to the instructions supplied with your DVD video for details.
• In rare instances, certain DVD videos may not operate properly with PlayStation primarily due to variations in the manufacturing process or software encoding of the DVD video software. If you experience problems, try restarting your DVD video. If problems persist, for more information call the publisher of the DVD video or contact the PlayStation on your warranty card for technical assistance.
*2
® service line number listed
2. This is
®
4
Table of contents
Checking the package contents
Getting started
Connection
WARNING
Precautions
Discs that can be played with the PlayStation®2 console
Checking the package contents
Part names
Positioning the console
Connecting your console to a TV set
Connecting digital audio equipment
Connecting other digital equipment
Using the main menu
Playing a game
Using memory cards
2 2 3 4 5 5 6 7 8 8 10 12
Check that you have the following items:
• PlayStation
• Analog controller (DUALSHOCK®2)
• Instruction manual (1 set)
• GRAN TURISMO
If any items are missing, contact our technical support line number listed on your warranty card for assistance.
®2 console
4 “Prologue” (1)
• AV cable (integrated audio/video)
• AC power cord
Games / Audio CDs
DVD videos
Additional
information
Playing an audio CD
Playing a DVD video
Settings and adjustments for the DVD player
Troubleshooting
Specifications
Glossary
WARRANTY
12 14 19 26 28 28 29
Part names
Positioning the console
5
PlayStation®2 console
Front
MEMORY CARD slots
” product family logo
1 (standby)/RESET 1 indicator
IR receiver
A (open) button and A indicator
Disc tray
Controller ports
L2 button, R2 button, L1 button, R1 button
Directional buttons
¢ button, a button, button, s button
START button
button and
You can position the console either horizontally or vertically. When positioning the console vertically, use the SCPH-10040 G vertical stand (for PlayStation®2) (sold separately). If a vertical stand (for PlayStation®2) is not available, set the console in the horizontal position as shown below. When positioning the console horizontally, you can use the SCPH-10110 PlayStation®2) (sold separately).
Notes
Do not place the console in any position other than the horizontal or vertical positions as doing so may damage it.
Do not change the position of the console while it is in operation. Doing so may damage the disc or cause the console to malfunction.
G
horizontal stand (for
Vertical positionHorizontal position
The ” ” product family logo on the disc tray
The “ ” product family logo on the disc tray can be rotated to match the horizontal or vertical positioning of the console.
Logo adjustment
GB
Getting started
Rear
ANALOG mode button
SELECT button
Left analog stick, right analog stick, L3 button, R3 button
MAIN POWER switch
~ AC IN connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL) connector
EXPANSION BAY
6
Connecting your console to a TV set
You can connect the PlayStation®2 console to most TVs or VCRs using the supplied AV cable (integrated audio/video) as described below. The console can also be connected to other types of TVs using specialized cables and adaptors, which are sold separately. For details, see the following sections:
•Connecting to a TV with an S VIDEO input connector (this page)
•Connecting to a TV with component video input connectors (page 7) The instructions in the above sections assume audio output through TV speakers.
Caution
For safety reasons, turn off the console and remove the power plug from the electrical outlet before making or adjusting connections.
Note
If the picture quality is reduced when using progressive scan with a TV that supports progressive scan, try viewing in standard interlace mode. For details on progressive mode, see “Progressive” on page 22.
Connecting to a TV with audio/video inputs
Connect your PlayStation®2 console to the TV using the supplied AV cable (integrated audio/video). When connecting, match the color-coded cords to the appropriate jacks on the components: yellow (video) to yellow, red (right audio) to red and white (left audio) to white.
After connecting
Set your TV to the appropriate video input mode. Refer to the instruction manual supplied with your TV for details.
When connecting to a wide screen TV (16:9 aspect ratio)
Set “Screen Size” in the System Configuration menu to “16:9.” For details on the System Configuration menu, see pages 8-9.
If your TV is monaural
Do not connect the red plug. If you want to hear both left and right sounds from a monaural TV, use a commercially available dual phono to single phono (stereo to monaural) type audio cable (sold separately).
EXPANSION BAY
Connecting to a VCR
Connect your PlayStation®2 console to the VCR using the supplied AV cable (integrated audio/ video) matching the plug colors. If your VCR is monaural, do not connect the red plug. However, when playing a DVD video, do not connect the console to a VCR. If you do, picture quality may be reduced. Connect the console directly to the TV.
After connecting
When playing a DVD video
VCR
Connect directly
console
2
®
PlayStation
Set your TV and VCR adjustments appropriately. Refer to the instruction manuals supplied with your TV and VCR for details.
Connecting to a TV with an S VIDEO input connector
Connect your PlayStation®2 console to the S VIDEO input connector on the TV using the SCPH-10060 G S VIDEO cable (sold separately). You will get a better picture than when using the AV cable (integrated audio/video).
After connecting
Set your TV to the appropriate video input mode (such as “S VIDEO”).
To S VIDEO input
To audio input (left)
To audio input (right)
TV
To AV MULTI OUT connector
To video input
To audio input (left)
To audio input (right)
DIGITAL OUT (OPTICAL) connector
AV MULTI OUT connector
AV cable (integrated audio/video)
AC power cord
MAIN POWER switch
~ AC IN connector
Connecting digital audio equipment
7
Connecting to a TV with component video input connectors
If your monitor or projector has component video input connectors (Y, CB/PB, CR/PR), connect your PlayStation®2 console using the SCPH-10100 G component AV cable (for PlayStation®2) (sold separately). This will provide the best picture.
Before connecting
If you connect your PlayStation®2 console to a television using the component AV cable without first setting the “Component Video Out” option under the System Configuration menu to “Y Cb/Pb Cr/Pr,” the TV screen might not display properly. Before connecting your console with the component AV cable, first use the supplied AV cable (integrated audio/video) and make sure that the “Component Video Out” option is set to “Y Cb/Pb Cr/Pr.”
Notes
• The PlayStation®2 console is not compatible with HDTV unless the proper software and connecting cables are used. Refer to the instruction manual supplied with your TV for details.
• You must use the component AV cable to view DVD video in progressive scan. If picture quality is reduced when using progressive scan, try viewing in normal (interlace) mode. For details, see “Progressive” on page
22.
Do not connect your PlayStation®2 console to a projection TV
Static, non-moving images, such as DVD menus, configuration displays or paused images may leave a faint image permanently on the TV screen if left on for extended periods of time. Projection TVs, except those of LCD screen types are more susceptible to this than other types of displays. Do not operate the console in such a manner that this could occur. Refer to the instruction manual supplied with your TV for details.
To audio input
Note about bouncing effect
Some TVs or monitors may experience a bouncing effect in their pictures when using the PlayStation There is nothing wrong with the PlayStation or the way it is manufactured. The problem technically lies within the television. If you encounter such a problem with your television/monitor, please contact our technical support line listed on your warranty card for technical assistance.
To AV MULTI OUT connector
To component video input connectors
®2 console.
®2 console
This section explains how to connect the PlayStation®2 console to audio equipment with digital connectors (such as Dolby Digital optical (AC-3) output). Using digital receivers and amplifiers, you can enjoy features such as multi-channel sound and surround sound.
Connecting to a receiver or amplifier, “MD (Minidisc)” deck or “DAT (Digital Audio Tape)” deck with a digital connector
Use a commercially available optical digital cable (sold separately) and set “DIGITAL OUT (OPTICAL)” in the System Configuration menu to “On” (the default setting). For details on the System Configuration menu, see pages 8-9.
PlayStation®2 console rear
DIGITAL OUT
(OPTICAL)
MAIN POWER
AV MULTI OUT
AC IN
~
Connected device
DIGITAL INPUT
OPTICAL
Notes
• Refer also to the instructions supplied with the device to be connected.
• You cannot directly make digital audio recordings of discs recorded in Dolby Digital format DTS or MPEG AUDIO format using an MD or a DAT deck.
Connecting to an audio device with a built-in DTS*1 Dolby Digital*2 or MPEG decoder (DVD video only)
By connecting to audio equipment with a built­in DTS Dolby Digital or MPEG decoder (sold separately), you can play back sound recorded on DVD videos in Dolby Digital (AC-3) DTS or MPEG AUDIO format to reproduce the effect of listening in a movie theater or concert hall.
Connect the device through the DIGITAL OUT (OPTICAL) connector using an optical digital cable (sold separately).
console
2
®
Optical digital cable (sold separately)
Speakers
PlayStation
Audio device with a built-in DTS Dolby Digital or MPEG decoder
Settings for the DVD player on your PlayStation
2 console
®
You may need to adjust settings for the DVD player depending on the devices to be connected. For details on using the Setup display, see pages 20-25.
• When you connect an audio device with a built­in DTS decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “DTS” to “On” in the “Audio Setup” display.
• When you connect an audio device with a built­in Dolby Digital decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “Dolby Digital” to “On” in the “Audio Setup” display.
• When you connect audio equipment with a built in MPEG decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “MPEG” to “On” in the “Audio Setup” display.
Note
Refer to the operating and setup instructions for the audio device to be connected.
*1 “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
*2 Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.
GB
Connection
8
Connecting other digital equipment
Using the main menu
Connecting a device using the Universal Serial Bus (USB) interface
The two USB connectors on the front of the console can be used to connect USB-compatible devices. Also refer to the instructions supplied with the device to be connected.
USB connectors
Note
Not all USB-compatible products work with the PlayStation compatible product’s user manual for more information.
2 console. See the appropriate USB-
®
When you turn on the console for the first time you will be prompted to adjust basic language and time settings. These settings can be changed later through the System Configuration menu. For details, see “Using the System Configuration menu” (pages 8-9). After setup, the main menu is displayed whenever you turn on the console without a disc inserted.
You can move to the Browser screen or the System Configuration menu from the main menu.
Using the Browser screen
You can do the following operations using the Browser screen:
•Check/copy/delete game data on the memory card (8MB) (for PlayStation®2) or memory card
•Start PlayStation® or PlayStation®2 format software
•Play an audio CD
•Play a DVD video
Select “Browser” using the directional buttons and press the button. The Browser screen is displayed. card (8MB) (for PlayStation®2), disc inserted in the console are displayed as icons.
Checking/copying/deleting data
You can copy data from one memory card (8MB) (for PlayStation®2) or memory card to another or delete data you no longer wish to keep. You cannot, however, copy data of the PlayStation®2 format software to an SCPH-1020 HI memory card. Insert the memory card (8MB) (for PlayStation®2) or memory card in advance.
The memory
memory card or
1 Select the icon of the memory
card (8MB) (for PlayStation memory card where the data you want to check/copy/delete is saved, and then press the button.
®2) or
2 Check/copy/delete data
according to the instructions on the screen.
Note
While copying or deleting data, do not remove the memory card (8MB) (for PlayStation
2) or memory card.
®
Using the System Configuration menu
Using the System Configuration menu, you can change or update your system settings for the PlayStation®2 console. Changes to these settings are saved and remain in effect even after you turn off the console. The default settings are underlined.
1 Select “System Configuration”
using the directional buttons and press the button.
The System Configuration menu is displayed.
2 Select the item you want using
the directional buttons and press the button.
x Clock Adjustment
Sets the clock.
1 Use the directional buttons to set
the month and then press the right directional button.
Use the same method to set the day, year, hour, minute and second. To return to the previous menu, press the left directional button.
2 Press the button to start the
clock.
9
Select optional settings for the clock
Select “Clock Adjustment” using the directional buttons and press the ¢ button. You can set the following optional items.
Time Format
•12 hour clock
•24 hour clock
Date Format
•MM/DD/YYYY
•DD/MM/YYYY
•YYYY/MM/DD
Time Zone
Select the appropriate time zone.
Daylight Savings Time (Summer Time)
Set this item to “Daylight Savings Time (Summer Time)” when daylight savings time is in effect.
•Standard (Winter Time)
•Daylight Savings (Summer Time)
x Screen Size
Selects the display mode according to the TV to be connected.
•4:3 : Select this when you connect a standard TV to the console.
•Full : Select this when you connect a standard TV to the console. The black margins on the upper and lower portions of the screen are cut off.
•16:9 : Select this when you connect a wide­screen TV to the console.
x DIGITAL OUT (OPTICAL)
Selects whether to output signal through the DIGITAL OUT (OPTICAL) connector.
•On : Select this when you connect with an optical digital cable (sold separately). Normally select this option.
•Off : Select this when you do not want sound signal to be output via the DIGITAL OUT (OPTICAL) connector.
x Component Video Out
If your TV, monitor or projector has an RGB input connector or component video input connectors (Y, CB/PB, CR/PR) that conform to the output signals of the console, set this item. When connecting the console using the supplied AV cable (integrated audio/video) or S VIDEO cable (sold separately), you do not need to set this item.
•Y Cb/Pb Cr/Pr : Select this when you connect the console to the component video input connectors.
•RGB : Select this when you connect the console to the RGB input connector.
Note
You can output PlayStation® and PlayStation®2 format software in either RGB or Y Cb/Pb Cr/Pr format. However, the PlayStation override the “Component Video Out” setting in the System Configuration menu and output all DVD video software in Y Cb/Pb Cr/Pr.
2 console has been designed to
®
x Remote Control
Set this option when using the DVD remote control (for PlayStation®2) which is sold separately.
•Gameplay Function On: Select this when operating PlayStation®2 or PlayStation format software using the DVD remote control.
•Gameplay Function Off: Select this when not operating PlayStation®2 or PlayStation format software using the DVD remote control.
Notes
• When Remote Control is set to “Gameplay Function
On”, some PlayStation software may stop operating normally when a controller is removed from controller port 1. Set to “Gameplay Function Off” if this happens.
• Operation using the DVD remote control buttons may
not work in some cases. Also, the DVD remote control will not work when you press two or more buttons at the same time.
• Some unlicensed 3rd party peripherals may not work
with “Gameplay Function” set to “On”. Note that the use of such peripherals is not recommended and will void your warranty.
2 or PlayStation® format
®
®
®
x Language
Selects the language for the on-screen display.
•English
•Traditional Chinese
Checking version information
You can check version information or settings of various features.
At the main menu, press the ¢ button. The Version Information screen is displayed. The default settings are underlined.
x Auto-diagnosis
The PlayStation its internal settings for best possible disc playback. However, when auto-diagnosis is set to “On” the console makes additional adjustments that may allow discs that were previously unplayable to be played.
2 console automatically adjusts
®
Diagnosis
•Off
•On
1 Select “Console” using the
directional buttons and press the f button.
2 Select “On” using the directional
buttons and press the button.
3 Insert a disc.
The console automatically starts the diagnosis.
Note
The diagnosis setting automatically returns to “Off” (default setting) when you press the 1/reset button or start playing a PlayStation format disc or a DVD video disc.
format disc, PlayStation®2
®
x PlayStation® Driver
The PlayStation® Driver is a program for loading PlayStation® format software.
Disc Speed
•Standard: Normally select this position.
•Fast: Loading time for a PlayStation® format software disc can be shortened. Depending on the software, there may be no effect or the software may unexpectedly fail. In this case, select “Standard.”
Texture Mapping
•Standard: Normally select this position.
•Smooth: You can make the display smoother when playing certain PlayStation® format software titles. Depending on the software, there may be no effect. In this case, select “Standard.”
1 Select “PlayStation® Driver”
using the directional buttons and press the f button.
2 Select the item you want using
the directional buttons and press the button.
Note
Adjusted settings automatically return to (default setting) when you press the 1/reset turn off the console.
x Clearing the Progressive setting
You can clear the DVD player’s Progressive setting.
Clear Progressive Setting
•No
•Yes
“Standard”
button or
1 Use the directional buttons to
select “DVD player”, and press the f button.
2 Press the button. 3 Use the directional buttons to
select “Yes” and press the button.
The Progressive setting is not cleared immediately after it is turned off. The setting will only be cleared when the DVD video starts playback.
4 Press the a button to return to
the main menu. Then use the directional buttons to select “Browser”, and press the button.
5 Use the directional buttons to
select the DVD video icon, and press the button.
The DVD player’s Progressive setting is cleared, and playback begins.
Notes
• This setting can be cleared only when “Progressive” is set to “On”. When “Progressive” is set to “Off”, the Options menu under DVD Player is not displayed.
• For details on setting “Progressive” to “On”, see “Progressive” under “Settings and adjustments for the DVD player” on page 22.
• The progressive setting is not cleared if any of the following occur before step 5 is completed: – The console enters standby mode after the
1 (standby)/reset button has been pressed.
– The console is turned off using the main power
switch on the console rear.
GB
Connection
10
Playing a game
Starting a game
1 Turn on the console using the
main power switch on the console rear.
The 1 (standby) indicator on the console front lights up in red to indicate that the console is now in standby mode.
2 Press the 1 (standby)/reset
button.
The 1 indicator turns green and the start-up screen is displayed.
3 Plug the analog controller
(DUALSHOCK port of the console.
®2) into a controller
1
4 Press the A (open) button.
The disc tray opens.
5 Place a disc on the disc tray with
the label side facing up (data side down).
6 Press the A button.
The disc tray closes. Screen 2 or 3 is displayed and the game is ready to begin.
Note
Set the analog controller (DUALSHOCK®2) to the appropriate mode for the software (see “Mode switching and the mode indicator” on page 11). Refer to the appropriate software manual for details.
Screens that appear at start-up
When turning on the console without first inserting a disc
Screen 1 is displayed.
•When you insert a PlayStation®2 or PlayStation® format disc after screen 1 has appeared, screen 2 or 3 will be displayed and you can start the game.
•You can move to the Browser screen or the System Configuration menu from screen 1. (For details, see “Using the main menu” on page 8.)
When turning on the console with a disc already inserted
Depending on the type of disc inserted, screen 2, 3 or 4 will be displayed. If screen 4 is displayed, it is possible that the inserted disc is not a PlayStation® or PlayStation®2 format disc. Check the disc type (page 3).
1 No disc is inserted (main menu).
4 A disc that cannot be played with the
PlayStation
2 console is inserted.
®
Ending a game
1 Press the A (open) button.
The disc tray opens.
2 Remove the disc. 3 Press the A button.
The disc tray closes.
4 Press the 1/reset button for
more than three seconds.
The 1 indicator turns red and the console enters standby mode.
3
2
4,6
5
Restarting a game
Press the 1/reset button. (Be sure not to hold the button down for any length of time, as that will put the console in standby mode.) Do not accidentally press the 1/reset button while playing a game, or the game will restart.
2 PlayStation
CD-ROM is inserted.
PlayStation® format CD-ROM is inserted.
3
2 format DVD-ROM /
®
4
1,3
2
When not intending to play a game for an extended period of time
Turn the power off at the main power switch on the console rear, disconnect the power plug from the electrical socket.
11
Changing from one game to another
There is no need to turn off the console when you want to change games.
1 Press the A (open) button.
The disc tray opens.
2 Remove the disc. 3 Place a new disc in the disc tray. 4 Press the A button.
The disc tray closes.
5 Press the 1 (standby)/reset
button to reset.
(Note: holding the 1/reset button down for any length of time may cause the console to go into standby mode.) After the start-up screen, screen 2 or 3 is displayed and the game begins.
Using the analog controller (DUALSHOCK®2)
•The analog controller (DUALSHOCK®2) can be used with PlayStation®2 and PlayStation format software.
•You can switch between digital and analog modes. When the controller is in analog mode, the following buttons and sticks may operate in analog fashion depending on the features supported by the software title. Refer to the software manual for details.
PlayStation®2 format software
Directional buttons, ¢ , a , , s buttons, left analog stick, right analog stick, L1, R1, L2, R2 buttons
PlayStation® format software
Left analog stick / right analog stick
•You can use the vibration function.
Using the analog controller (DUALSHOCK
•The analog controller (DUALSHOCK®) can also be used with PlayStation®2 and PlayStation® format software.
®) (sold separately)
•You can switch between digital and analog modes. When in analog mode, you can enjoy the analog operation of the left analog stick and right analog stick.
®
PlayStation®2 format software
Left analog stick / right analog stick
PlayStation® format software
Left analog stick / right analog stick
•You can use the vibration function.
Mode switching and the mode indicator
The analog controller (DUALSHOCK®2) can be switched between two modes by pressing the analog mode button. Each time the analog mode button is pressed, the mode changes as follows:
Digital mode (indicator: off)
Xx
Analog mode (indicator: red)
Note
Switch to the appropriate mode for use. Note, however, that some software makes this adjustment automatically. In such cases, the analog mode button is overridden by the software. For details, refer to the software manual.
Vibration function
The analog controller (DUALSHOCK®2) features a vibration function when the function is supported by the software title. The vibration function can be set to ON or OFF on the software option screen.
Notes
• When the analog controller (DUALSHOCK®2) is not being used, turn the console off or unplug the controller from the console.
• Before using the vibration function, please read “ on safety when using the (DUALSHOCK
Before using the
®2)
on page 3.
analog controller
analog
controller (DUALSHOCK®2)
After turning the console on, rotate the left and right analog sticks once with your thumbs before starting a game. Do not twist the analog sticks, but rotate as if drawing a circle as shown in the diagram above.
GB
Games / Audio CDs
Notes
5
1,4
2,3
Note
With a multi-disc game, follow steps 1 through 4 to switch discs. Refer to the software manual for details.
L1 button
Directional buttons
ANALOG mode button
L2 button R2 button
START
SELECT
button
button
R1 button
¢ button
a button
button
s button
Mode indicator: Off
Analog mode (indicator: red)Digital mode (indicator: off)
L1 button
Directional buttons
Left analog stick / L3 button*
* The R3 and L3 buttons function when the sticks are pressed.
L2 button R2 button
SELECT button
ANALOG mode button
START button
Mode indicator: Red
R1 button
¢ button
a button
button
s button Right analog stick /
R3 button*
12
Using memory cards
Playing an audio CD
You can save and load game or other data using the memory card (8MB) (for PlayStation®2) or memory card (each sold separately).
Differences between the memory card (8MB) (for PlayStation®2) and memory card
When playing PlayStation®2 format software, use the memory card (8MB*) (for PlayStation®2) (1). When playing PlayStation® format software, use the memory card (2).
For the PlayStation® game console, units of game data are described as “memory blocks,” however for the PlayStation®2 console, they are described as “KB” (kilobytes).
* 8 MB = 8,000 KB
1 Memory card (8MB) (for PlayStation®2)
(sold separately)
The memory card (8MB) (for PlayStation®2) can save and load PlayStation®2 format software game data. Each memory card (8MB) (for PlayStation®2) can save about 8 MB of game data, but some of this may be used as file control information. The memory card (8MB) (for PlayStation®2) uses MAGICGATE, a technology that helps protect copyrighted content through data encryption and hardware authentication.
technology developed by Sony Group.
other products bearing the “MagicGate” trademark.
2 Memory card (sold separately)
The memory card can save and load PlayStation® format software game data. Each memory card can save 120 KB (15 memory blocks) of game data.
Note
You cannot copy data to a memory card (8MB) (for PlayStation memory available. Before playing, check how much space is needed to save the game and how much space is available on the memory card (8MB) (for PlayStation memory card. Check the appropriate software manual to determine the amount of space needed to save the data for a given game.
is a term of copyright protection
does not guarantee compatibility with
2) or memory card that does not have enough
®
®
2) or
Inserting
the memory card (8MB) (for PlayStation®2) or memory card
Insert the memory card (8MB) (for PlayStation®2) or the memory card into the MEMORY CARD slot, with the arrow side up.
MEMORY CARD slot 2MEMORY CARD slot 1
Notes on using the memory card (8MB) (for PlayStation multitap
•When using PlayStation®2 format software,
use the SCPH-10090 G multitap (for PlayStation®2). When using PlayStation® format software, use the SCPH-1070 G multitap.
When you insert the SCPH-1070 G multitap into
controller port 1, do not insert the memory card (8MB) (for PlayStation®2) or memory card into memory card slot 1 of the PlayStation®2 console. This also applies when you insert a multitap into controller port 2. If you do so, the data may be lost.
2) or memory card with a
®
Checking/copying/deleting game data
You can copy game data from one memory card (8MB) (for PlayStation®2) or memory card to another or delete data you no longer wish to keep. You cannot, however, copy game data of the PlayStation®2 format software to the memory card.
You can check, copy and delete game data in the Browser screen. For details on the browser, see “Checking/copying/deleting data” on page 8.
Note
You cannot save or load game data in the Browser screen. For details on game data saving or loading, refer to the software manual.
Playing an audio CD
1 Press the A (open) button.
The disc tray opens.
2 Place a disc on the disc tray with
the label side facing up (data side down).
3 Press the A button.
The disc tray closes.
4 Use the directional buttons to
select the audio CD icon, and press the button.
The audio CD screen is displayed.
5 Select the track number you
want to play and press the button.
Playback begins.
Ending audio CD playback
1 Press the A (open) button.
The disc tray opens.
2 Remove the disc. 3 Press the A button.
The disc tray closes.
4 Press and hold down the
1 (standby)/reset button for more than three seconds.
The console enters standby mode.
Operating the CD player
The CD player can be operated using the Control Panel or directly with the buttons on the analog controller (DUALSHOCK®2). You can also operate the CD player using the SCPH-10420 G DVD remote control (for PlayStation®2), which is sold separately. During playback, select the icon in the CD operation screen using the directional buttons. Then press the X button.
N Start playback X Pause x Stop playback . Find the beginning of the current or
previous track
> Find the beginning of the next track m Fast reverse M Fast forward
L2 button: m (Fast reverse)
L1 button:
.
(Previous)
SELECT button: x (Stop)
Music discs encoded with copyright protection technologies
The audio CD playback feature of this product is designed to conform to the Compact Disc (CD) standard. Recently, some record companies have started marketing music discs encoded with copyright protection technologies. Some of these music discs do not conform to the CD standard, and may not be playable on this product.
R2 button: M(Fast forward)
R1 button: > (Next)
START button: N (Start)/ X (Pause)
13
Playing in various modes
You can change between various play modes. The default setting for “Play Mode” is “Normal”, and the default for “Repeat” is “Off”. Select the audio CD icon in the Browser screen, and then press the f button to change the settings.
To play the desired tracks in a specified order
1 Select “Play Mode” using the
directional buttons and press the button.
2 Select “Program” using the
directional buttons and press the button.
3 Select the number of the specific
track using the directional buttons, and then press the button.
Repeat this step to select all the tracks you want to play.
4 Press the a button to return to
the Browser screen.
5 Select the audio CD icon and
press the button.
The tracks are displayed in their programmed order. Select the track number you want to play, and press the button. Playback begins.
To play the desired tracks repeatedly
Follow steps 1 to 4, and then follow the instructions on playing all tracks repeatedly, or on playing one track repeatedly. For details, see “To play all tracks repeatedly” or “To play a track repeatedly” at right.
To play the tracks in random order
1 Select “Play Mode” using the
directional buttons and press the button.
2 Select “Shuffle” using the
directional buttons and press the button.
3 Press the a button to return to
the Browser screen.
4 Select the audio CD icon, and
press the button.
The tracks are displayed in random order. Select the track number you want to play, and press the button. Playback begins.
To play random tracks repeatedly
Follow steps 1 to 3, and then follow the instructions on playing all tracks repeatedly, or on playing one track repeatedly. For details, see “To play all tracks repeatedly” or “To play a track repeatedly” below.
To play all tracks repeatedly
1 Select “Repeat” using the
directional buttons and press the button.
2 Select “All” using the directional
buttons and press the button.
3 Press the a button to return to
the Browser screen.
4 Select the audio CD icon, and
press the button.
The tracks are displayed. Select the track number you want to play, and press the button. Playback begins.
To play desired or random tracks repeatedly
Follow steps 1 to 3, then follow the instructions on playing the desired tracks in a specified or random order. For details, see “To play the desired tracks in a specified order” or “To play the tracks in random order” at left.
To play a track repeatedly
1 Select “Repeat” using the
directional buttons and press the button.
2 Select “1” using the directional
buttons and press the button.
3 Press the a button to return to
the Browser screen.
4 Select the audio CD icon, and
press the button.
The tracks are displayed. Select the track number you want to play, and press the button. Playback begins.
To play a track in Program Play or Shuffle Play repeatedly
Follow steps 1 to 3, then follow the instructions on playing desired tracks or tracks in random order. For details, see “To play the desired tracks in a specified order” or “To play the tracks in random order” at left.
You can go to the Play Options screen from the screen displaying the track numbers.
Select the small audio CD icon on the top left of the screen using the up or left directional button, and press the f button. The Play Options screen is displayed, and you can operate the CD player in the same manner as in “Playing in various modes” at left. Press the a button in the Play Options screen and the tracks are displayed. Choose the track you want to play, and press the ✕ button. Playback begins.
Notes on playing an audio CD with a DTS audio track
• If you play an audio CD recorded in DTS format, an extremely loud noise will be emitted from the analog audio output of an audio device connected to the AV MULTI OUT connector. Be careful not to cause damage to your audio system when the audio device's analog audio output is connected to the receiver (amplifier). You must connect a DTS decoder to the DIGITAL OUT (OPTICAL) connector to playback DTS audio tracks.
• When DIGITAL OUT (OPTICAL) is set to "Off" in the System Configuration menu, you will not be able to hear the DTS audio from an audio CD even if the audio device is connected using an optical digital cable.
GB
Games / Audio CDs
14
Playing a DVD video
Playing a DVD video
Depending on the DVD video, some operations may be different or restricted. Refer to the instructions supplied with your disc.
1 Turn on the console using the
main power switch on the console rear.
The 1 (standby) indicator on the console front lights up in red to indicate that the console is now in standby mode.
2 Press the 1 (standby) /reset
button.
The 1 indicator turns green and the start-up screen is displayed.
3 Press the A (open) button.
The disc tray opens.
4 Place a disc on the disc tray with
the label side facing up (data side down).
5 Press the A button.
The disc tray closes and DVD content is displayed on the screen.
Notes
• The PlayStation®2 console is equipped with advanced playback features that can optimize audio/video quality. For details on adjusting settings to enable these advanced features, see pages 20-25.
• If you press the A button during or after playback, the Browser screen appears.
• When playing a DVD video, do not connect the console to a VCR. If you do, picture quality may be reduced. Connect the console directly to the TV.
Ending DVD video playback
When you have finished viewing a DVD, follow the steps below to save DVD player settings, return to the Browser screen or put the console in standby mode.
1 Press the A (open) button.
The disc tray opens and the Browser screen is displayed.
2 Remove the disc. 3 Press the A button to close the
disc tray.
4 Press and hold down the 1/reset
button for more than three seconds.
The 1 indicator turns red and the console enters standby mode.
Note
To save changes to DVD player settings you must eject the DVD before pressing the 1 (standby)/reset button or turning off the console using the main power switch on the console rear.
If you experience problems playing a DVD video:
In rare instances, certain DVD videos may not operate properly with PlayStation variations in the manufacturing process or software encoding of the DVD video software. If you experience problems, try restarting your DVD video. If problems persist, for more information call the PlayStation line number listed on your warranty card for technical assistance.
®2. This is primarily due to
® service
Operating the DVD player
There are three ways to operate the DVD player:
•You can operate the DVD player directly using the analog controller (DUALSHOCK®2) as explained below.
•You can operate the DVD player through the on-screen Control Panel. The Control Panel allows access to additional DVD player options and settings. For details, see “Using the Control Panel” on page 15.
1 2
2
3
4 5
1 L2 button ( Fast Reverse Search)
Fast reverses playback on the screen to aid in looking for a particular scene.
2 L1 button (. Previous)
Returns to the beginning of the current or previous chapter.
3
Up, down, right, and left directional buttons
Used to select items displayed on the screen.
4 L3 button ( Subtitle Options)
Displays and changes DVD subtitle options.
5 SELECT button
Displays the Control Panel.
6 R2 button ( Fast Forward Search)
Fast forwards playback on the screen to aid in looking for a particular scene.
7 R1 button (> Next)
Skips to the beginning of the next chapter.
*
•You can also operate the DVD player using the DVD remote control (for PlayStation®2), which is sold separately.
Using the analog controller (DUALSHOCK®2)
The function of each button on the analog controller (DUALSHOCK®2) is explained below.
Note
The direct button functions of the analog controller (DUALSHOCK is displayed.
2) cannot be used when the Control Panel
®
6 7
DUALSHOCK
8
9
q;
qa qs
qd
8 f button ( Menu)
Displays the disc menu of DVD-Video discs. The content of the menu varies from disc to disc.
9 a button (x Stop)
Stops playback.
0 button (Enter)
Enters the item selected on the screen.
qa s button ( Top Menu)
Displays the disc menu of DVD-Video discs. The content of the menu varies from disc to disc.
qs R3 button (Audio Options)
Displays and changes DVD audio options.
qd START button (N Play/X Pause)
Starts playback/Pauses and resumes playback.
* When using a controller without the L3 or R3 buttons,
use the Control Panel to select among available subtitle and audio options.
*
15
Using the Control Panel
You can select various playback modes and adjust DVD player settings using the on-screen Control Panel. Navigate the Control Panel using the analog controller (DUALSHOCK®2) as described below.
DUALSHOCK
2
buttons
Display or turn off the Control Panel
Enter
Cancel
Select
SELECT button
SELECT button
button
a button
Up, down, left, and right directional buttons
a button buttonDirectional
1 Press the SELECT button.
The Control Panel is displayed.
2 Select the item you want using
the directional buttons.
3 Press the button.
For details on each Control Panel display item, see pages 16-25.
Control Panel item list
1 Menu (page 16)
Displays the disc menu of DVD-Video discs. The content of the menu varies from disc to disc.
2 Top Menu (page 16)
Displays the disc menu of DVD-Video discs. The content of the menu varies from disc to disc.
3 O Return (page 16)
Returns to the previously selected screen.
4 Audio Options (page 19)
Displays and changes DVD audio options.
5 Angle Options (page 19)
Displays and changes DVD viewing angles.
6 Subtitle Options (page 19)
Displays and changes DVD subtitle options.
7 Go To (page 19)
Skips to the selected title or chapter number or the specified time, and starts playback.
8 Setup (page 20)
Displays the Setup display for changing various picture and audio options. You can also choose a language for subtitles and the menu, set Parental Control level, and so on.
9 Time Display (page 16)
Displays the current title or chapter number, and the elapsed or remaining time.
0 Help (page 19)
Displays the direct button functions of the analog controller (DUALSHOCK®2).
qa Go to Chapter (page 19) /Number icons
Used to enter the number of a chapter you wish to play, or numerical codes.
qs . Previous
Returns to the beginning of the current or previous chapter.
qd > Next
Skips to the beginning of the next chapter.
GB
DVD videos
qf Search (page 20)
Fast reverses playback on the screen to aid in looking for a particular scene.
qg Search (page 20)
Fast forwards playback on the screen to aid in looking for a particular scene.
qh Slow (page 20)
Changes to reverse playback in slow­motion.
qj Slow (page 20)
Changes to playback in slow-motion.
qk N Play
Starts playback.
ql X Pause
Pauses and resumes playback.
w; x Stop
Stops playback.
wa A-B Repeat (page 18)
Specifies a scene for playback, and starts playback of the scene that has been set.
ws Shuffle Play (page 17)
Starts playback of titles or chapters in random order.
wd Program Play (page 16)
Displays the Program setup screen.
wf Repeat Play (page 17)
Selects repeated playback of all the titles on the disc, or one title or chapter.
wg Original/Play List (page 18)
For DVD-RW discs recorded in VR mode. Selects Original or Play List content to play back.
wh Clear
Clears selected numbers or playback modes.
16
Playing a DVD video (continued)
You can use the Control Panel to set various playback modes.
Using the DVD disc menu
Some DVDs allow you to select disc contents from a menu. When you play such DVDs, you can select the language for the subtitles, the language for the sound, and other options using the menu.
1 Use the directional buttons to
select the Menu) icon, and press the button.
The menu is displayed. Menu content may vary depending on the DVD.
(Menu) or (Top
2 Use the directional buttons to
select an item, and press the button.
To return to the previous screen in the menu
Use the directional buttons to select the O (Return) icon, and press the button. This function may not be available on some DVDs.
Using the analog controller (DUALSHOCK
®2)
1 Press the f or s button.
The menu is displayed. Menu content may vary depending on the DVD.
2 Use the directional buttons to
select an item, and press the button.
Notes
• Some DVDs do not have a menu.
• Depending on the DVD, a menu may be referred to as “DVD Menu”, “Title Menu” or “Titles” in the instructions supplied with the disc.
To check playback settings
When playing a disc use the directional buttons to select the (Time Display) icon, and press the X button. Icons for currently set playback modes will be displayed in the top right corner of the screen.
To clear all playback settings and return to normal playback
Use the directional buttons to select the icon, and press the ✕ button.
Playback from the last stopping point (Resume Play)
The DVD player remembers the point where you stopped the disc, and resumes playback from that point.
1 During playback, press the a
button to stop playback.
The message, “Press [Play] to resume viewing. To start from the beginning, press [Stop] and then [Play].” appears, and then the Control Panel (page 15) is displayed. If the message “Resume function cannot be used here. Play will restart from the beginning.” appears, Resume Play is not available.
2 Select the N (Play) icon using
the directional buttons and press the button.
The DVD player starts playback from the point where you stopped the disc in step 1.
To clear the last stopping point
After step 1, select the x (Stop) icon and press the button.
To clear Resume Play
If you resume playback after stopping, the DVD player enters Resume Play mode. Many advanced settings for the DVD player are not available during Resume Play. If you want to clear Resume Play to adjust settings, select the x (Stop) icon and press the ✕ button twice.
Notes
• Resume Play may not be available on some DVDs or
for some video scenes.
• Depending on where you stop playback, the console
may resume playback from a slightly different point.
• Resume Play is not available when:
– Program Play or Shuffle Play is selected. – The disc tray on the console front is opened using
the A button.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
– The x (Stop) icon is selected and the X button is
pressed twice during playback.
Playback in desired order (Program Play)
You can create a program to play back titles and chapters in any order you like.
1 Use the directional buttons to
select the icon, and press the button.
(Program Play)
2 Use the directional buttons to
select the item number, and press the button.
3 Use the directional buttons to
select the title number, and press the button.
4
Use the directional buttons to select the chapter number, and
press the
button.
5 Repeat steps 2 - 4 to set other
titles or chapters.
6 Press the START button.
Program Play begins.
Program Play settings are saved and remain in effect even after playback ends. Use the directional buttons to select the (Program Play) icon, and then press the button.The Program Setup screen is displayed. Press the START button to play the programmed sequence again.
Changing or clearing Program Play settings
1 Use the directional buttons to
select the icon, and press the button.
(Program Play)
2 Use the directional buttons to
select the item number you want to change, and press the button.
3 Use the directional buttons to
select the title number you want to play, and press the button.
4 Use the directional buttons to
select the chapter number you want to play, and press the button.
To clear Program Play settings, select “Clear” at step 3, and press the button.
To clear all Program Play settings
1 Use the directional buttons to
select the icon, and press the button.
(Program Play)
2 Use the directional buttons to
select “Clear all”, and press the button.
17
To use Program Play with Shuffle Play or Repeat Play
• Program Play with Shuffle Play During playback in Program Play mode, use
the directional buttons to select the (Shuffle Play) icon, and press the button.
Shuffle Play is turned on. When Shuffle Play is used with Program
Play, Shuffle Play options are limited to “Shuffle On” and “Shuffle Off”.
• Program Play with Repeat Play During playback in Program Play mode, use
the directional buttons to select the (Repeat) icon, and press the button.
Repeat Play is turned on. When Repeat Play is used with Program
Play, Repeat Play options are limited to
“Repeat On” and “Repeat Off”. For details on Shuffle Play and Repeat Play, see “Playback in random order (Shuffle Play)”, and “Repeated Playback (Repeat Play)” at right.
Notes
• Program Play settings cannot be changed while playing
in Program Play mode.
• A-B Repeat is cleared when Program Play is set.
• Program Play may not be available for some discs.
• Only the number of titles and chapters recorded in the
disc will be displayed on the screen.
• Program Play is stopped when:
– A-B Repeat is set.
– The DVD disc menu is displayed.
• Program Play settings are cleared when:
– The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
Playback in random order (Shuffle Play)
The console will automatically select a random order to play titles and chapters. Playback order will be different each time Shuffle Play is used.
During playback, use the directional buttons to select the (Shuffle Play) icon, and press the button. The screen will display the following shuffle modes in turn each time the button is pressed. Shuffle Play will begin as soon as the playback mode is selected.
Title Shuffle (Playback of titles in random order)
Chapter Shuffle (Playback of chapters in random order)
Shuffle Off (Clear Shuffle Play)
To end Shuffle Play
Use the directional buttons to select the (Shuffle Play) icon, and press the button until “Shuffle Off” is displayed.
To use Shuffle Play with Program Play or Repeat Play
• Shuffle Play with Program Play When playing in Shuffle Play mode, use the directional buttons to select the (Program Play) icon, and press the button to select program settings. Press the START button. Shuffle Play is turned on. When Program Play is used with Shuffle Play, Shuffle Play options are limited to “Shuffle On” and “Shuffle Off”.
• Shuffle Play with Repeat Play When playing in Shuffle Play mode, use the directional buttons to select the (Repeat) icon, and press the button. Repeat Play is turned on. When Repeat Play is used with Shuffle Play, Repeat Play options are limited to “Repeat On” and “Repeat Off”.
For details on Program Play and Repeat Play, see “Playback in desired order (Program Play)” on page 16, or “Repeated playback (Repeat Play)” at right.
To set Shuffle Play when a disc is not playing
Use the directional buttons to select the (Shuffle Play) icon, and press the button until the shuffle mode you want to set is displayed. Use the directional buttons to select the N (Play) icon, and press the button. Shuffle Play begins.
Notes
• A-B Repeat is cleared when Shuffle Play is set.
• Shuffle Play may not be available on some discs.
• Shuffle Play is cleared when: – A-B Repeat is set. – The DVD disc menu is displayed. – The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
• When Chapter Shuffle is selected, up to 200 chapters can be played in random order. If the disc has more than 200 chapters, 200 chapters will be selected at random.
Repeated playback (Repeat Play)
All of the titles on the DVD, or one title or chapter can be repeatedly played back using Repeat Play.
During playback, press the directional buttons to select the (Repeat) icon, and press the button. The screen will display the following repeat modes in turn each time the button is pressed. Repeat Play will begin as soon as the repeat playback mode is selected.
Disc Repeat (Repeated playback of all titles)
Title Repeat (Repeated playback of one title)
Chapter Repeat (Repeated playback of one chapter)
Repeat Off (Clear Repeat Play)
To end Repeat Play
Use the directional buttons to select the (Repeat) icon, and press the button until “Repeat Off” is displayed.
To use Repeat Play with Program Play or Shuffle Play
• Repeat Play with Program Play During playback in Repeat Play mode, use the directional buttons to select the (Program Play) icon, and press the button. Make program selections and press the START button. Repeat Play is turned on. When Program Play is used with Repeat Play, Repeat Play options are limited to “Repeat On” and “Repeat Off”.
• Repeat Play with Shuffle Play During playback in Repeat Play mode, use the directional buttons to select the (Shuffle Play) icon, and press the button. Repeat Play is turned on. When Shuffle Play is used with Repeat Play, Repeat Play options are limited to “Repeat On” and “Repeat Off”.
For details on Program Play and Shuffle Play, see “Playback in desired order (Program Play)” on page 16, or “Playback in random order (Shuffle Play)” on page 17.
To set Repeat Play when a disc is not playing
Use the directional buttons to select the (Repeat) icon, and press the button until the Repeat mode you want is displayed. Use the directional buttons to select the N (Play) icon, and press the button. Repeat Play begins.
GB
DVD videos
Loading...
+ 39 hidden pages