Sony SCPH-35003 GT User Manual

MEMORY CARD slots
3-070-918-31(1)
Instruction Manual
Thank you for purchasing the PlayStation®2 computer entertainment system. You can play PlayStation®2 format CD-ROM and DVD-ROM discs, PlayStation® format CD-ROM discs, audio CDs and DVD video discs with this console. Before operating this console, please read this manual carefully and retain it for future reference.
” product family logo
1 (standby) /RESET button and 1 indicator
A (open) button and A indicator
Disc tray
Controller ports
L2 button, R2 button, L1 button, R1 button
Directional buttons
¢ , a , ✕ , s buttons
START button
SCPH-35003 GT
© 2001 Sony Computer Entertainment Inc. All rights reserved.
ANALOG mode button
SELECT button
Left analog stick, right analog stick, L3 button, R3 button
2

WARNING

Precautions

To prevent fire or shock hazard, do not expose the console to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Caution
The use of optical instruments with this product will increase eye hazard. As the laser beam used in this unit is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
Read carefully before operating your PlayStation®2
A few people may experience epileptic seizures when viewing flashing lights or patterns in our daily environment. These persons may experience seizures while watching TV or playing video games, including DVD videos or games played on the PlayStation console. Players who have not had any seizures may nonetheless have an undetected epileptic condition. Consult your physician before operating the PlayStation console if you have an epileptic condition or experience any of the following symptoms while watching TV programs or playing video games: altered vision, muscle twitching, other involuntary movements, loss of awareness of your surroundings, mental confusion, and/ or convulsions.
This appliance is classified as a CLASS 1 LASER product.
2
®
Disc handling
• Do not leave discs near a heat source, in direct sunlight, or in high humidity.
• Store discs in their cases when they are not being used. Stacking discs or standing them at an angle without putting them in their cases can cause the discs to warp.
• Do not touch the disc surface when handling a disc; hold it by the edges.
• Do not stick paper or tape onto the disc.
• Do not write on the disc with a marker, etc.
This label is located on the protective housing of the CD/ DVD unit inside the enclosure.
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with 2 or @ mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact the appropriate PlayStation can be found on the customer registration card, within every PlayStation manual.
2
®
customer service number which
®
and PlayStation®2 format software
®
• Fingerprints or dust on the disc can distort the picture or reduce sound quality. Make sure discs are always clean before use.
• Clean discs using a soft cloth, lightly wiping from the centre outwards.
• Do not use solvents such as benzene, commercially available cleaners not intended for CD use or anti-static spray intended for vinyl LPs since these can damage disc.
Do not place the console in an unusually hot location
Do not leave the console in a car with its windows closed (particularly in summer) as this may warp the exterior of the console or cause the console to malfunction.
Moisture condensation
If the console or the disc is brought directly from a cold location to a warm one, moisture may condense on the lens inside the console or on the disc. Should this occur, the console may not operate properly. In this case, remove the disc and do not put the disc back in until the moisture evaporates. (This could take several hours.) If the console still does not operate properly, please contact the appropriate PlayStation customer service number which can be found on the customer registration card, within every PlayStation manual and on our website www.scee.com
and PlayStation®2 format software
®
Do not subject the console to violent physical shock
Do not throw or drop the console or its accessories, and do not knock the console or its accessories against other objects. When carrying the console, do not subject it to any type of violent physical shock. This may damage the disc or cause the console to malfunction.
Avoid damaging the exterior of the console
Do not apply any solvents, and do not place any rubber or vinyl materials on the surface of the console for an extended period of time. Doing so may damage the plastic surface or cause the paint to peel off.
Cleaning the exterior of the console
When cleaning the exterior of the console, be sure to turn the power off with the MAIN POWER switch on the back of the console and disconnect the AC power plug from the electrical socket.
• If the exterior of the console becomes dirty, soak a soft cloth in a mild detergent solution diluted with water, tightly squeeze the cloth to remove the excess liquid, wipe the affected area of the exterior and finish by wiping with a dry cloth.
• Do not use benzene or paint thinner to clean the exterior of the console since these may damage the surface or cause the paint to peel off. When using a chemically-treated dust cloth, follow the usage instructions supplied with it.
Never disassemble the console
• Use your PlayStation®2 computer entertainment system according to the instructions in this manual. No authorisation for the analysis or modification of the PlayStation circuit configurations, is given.
• There are no user-serviceable components inside the PlayStation guarantee. Additionally, there is a risk of exposure to (laser) radiation as well as to electrical shock hazards.
2 console, nor the analysis and use of its
®
2 console. Disassembling it will void the
®
Notes on safety when using the Analog Controller (DUALSHOCK Controller (DUALSHOCK
• Stop using the console immediately if you begin to feel tired or if you experience an unpleasant sensation or pain in your hands and/or arms while operating the controller. If the condition persists, consult a doctor.
• Do not attempt to operate the controller in any way except with your hands. Do not bring the controller into close contact with your head, face or near the bones of any other part of your body.
• The vibration function of the Analog Controller (DUALSHOCK (DUALSHOCK Do not use the vibration function of the Analog Controller (DUALSHOCK (DUALSHOCK any ailment in the bones or joints of your hands or arms.
• Do not use the Analog Controller (DUALSHOCK the Analog Controller (DUALSHOCK that supports the vibration function if you have injuries or ailments to the bones or muscles of your fingers , hands, wrists or arms. The vibration of the controller may aggravate such conditions.
• Avoid prolonged use of the Analog Controller (DUALSHOCK (DUALSHOCK intervals.
2) or the Analog Controller
®
) can aggravate injuries.
®
) supported by software if you have
®
2) and Analog Controller
®
). Take a break at about 30 minute
®
2) and Analog
®
)
®
2) and Analog Controller
®
) with software
®
®
2) or

Discs that can be played on PlayStation®2

Table of contents
3
PlayStation®2 format
DVD-ROM
Disc logo
Disc colour
Contents
Disc size
Disc logo
Contents
Disc size
Play time
* When you position the console vertically and play an 8 cm audio CD, be sure to use an optional adaptor.
”, PlayStation®2 logo
and
designation
Silver
Audio CDs
Audio
12 cm
74 min.
PlayStation®2 format
CD-ROM
”, PlayStation®2 logo
and
designation
Blue
Audio + Video
12 cm
8 cm*
(CD single)
20 min.
About 4 hrs (for
single-sided DVDs)
/ about 8 hrs (for
double-sided DVDs)
12 cm
PlayStation® format
CD-ROM
PlayStation® logo and
Black
DVD VIDEOs
DVD logo is a trademark.
Audio + Video
About 80 min. (for
single-sided DVDs) /
about 160 min. (for
double-sided DVDs)
designation
8 cm
Getting started
Connection
Game / Audio CD
WARNING
Precautions
Discs that can be played on PlayStation®2
Checking the package contents
Positioning the console
Connecting your PlayStation®2 to a TV set
Connecting digital audio equipment
Connecting other digital devices
Using the Main Menu
Playing a game
Using the Analog Controller
Using Memory Cards
GB
Connection
2 2 3 4 4 4 6 6 7 8 9 10
DVD video systems and regional restrictions
•This console conforms to the PAL broadcast standard. You cannot play discs recorded for other broadcast standards (such as NTSC) on this console (unless the NTSC disc displays
ALL
the
label and an NTSC compatible TV is
used).
•Some DVD videos are marked with region numbers such as 2. The number contained within the symbol represents the region number of DVD players on which the disc can be played. DVD videos that do not bear this symbol, or that do not display the number 2 cannot be played on your console.
•DVDs with the this console. If you attempt to play any other DVDs, a message stating “This disc cannot be played due to regional restrictions.” will appear on­screen.
ALL
label can also be played on
•Some DVDs that have no region code markings may still be subject to area restrictions and may not be playable on the console.
Note on playback operations of DVDs
This console plays DVDs as they are designed to be played by the software producers. Some features may not be available for some DVDs, depending upon the design. Make sure to refer to the instructions supplied with your DVD for details.
Specially-shaped discs
Do not use irregularly-shaped CDs (for example, heart- or star-shaped CDs) as they may cause the console to malfunction.
DVD video
Additional
information
Playing an audio CD
Playing a DVD video
Using various functions with the Control Panel
Settings and adjustments for the DVD Player
Troubleshooting
Specifications
Glossary
GUARANTEE
10 11 12 15 19 20 21 21
4

Checking the package contents

Check that you have the following items:
• Console
• Analog Controller (DUALSHOCK®2)
• AC power cord
• AV cable (integrated audio/video)
• EURO-AV Connector Plug
Connecting your PlayStation®2 t
This section explains the connection method for listening to sound through your TV speakers. If you wish to connect to audio equipment with digital connectors, see “Connecting digital audio equipments” on page 6.
o
Connecting to a TV with audio/video input
Connect your PlayStation®2 computer entertainment system to the TV using the supplied AV cable (integrated audio/video). When connecting the cords, be sure to match the colour-coded cords to the appropriate jacks on the equipment: Yellow (video) to Yellow, Red (right audio) to Red and White (left audio) to White.
After connecting
Set your TV to the appropriate video input mode. Refer to the instruction manual for your TV.
When connecting to a wide-screen TV (16:9 aspect ratio)
Set “Screen Size” in the system configuration menu to “16:9.” For details on the system configuration menu, see page 7.
If your TV is monaural
Do not connect the red plugs. If you want to hear both left and right sounds from a monaural TV, use a commercially available dual phono to single phono (stereo to monaural) type audio cable (sold separately).
• Instruction manual
®
• GRAN TURISMO
3 A-spec

Positioning the console

You can position the console either horizontally or vertically. When positioning the console vertically, use the SCPH-10040 E vertical stand (for PlayStation®2) (sold separately). When positioning the console horizontally, you can use the SCPH-10110 E horizontal stand (for PlayStation®2) (sold separately).
Vertical positioningHorizontal positioning
Notes
The console may be damaged if it is placed in any position other than a horizontal or vertical one. Do not change the position of the console (from horizontal to vertical or vice versa) while it is in operation. Doing so may damage the disc or cause the console to malfunction.
The ” ” product family logo located on the disc tray
The “ ” product family logo on the disc tray can be rotated to match the horizontal or vertical positioning of the console.
EXPANSION BAY
DIGITAL OUT (OPTICAL) connector
To AV MULTI OUT connector
AV cable (integrated audio/video) AC power cord
Static image caution
Static, non-moving images, such as DVD menus, configuration displays, or images “paused” may leave a faint image permanently on the TV screen if left on for extended periods of time. Projection TVs are more susceptible to this than other types of displays. Do not operate the console in such a manner that this could occur.
MAIN POWER switch
~AC IN connector
To the mains
Note about bouncing effect
Some TVs or monitors may experience a bouncing effect in their pictures when using the PlayStation There is nothing wrong with the PlayStation or the way it is manufactured. The problem technically lies within the television. If you encounter such a problem with your television/monitor, please contact the appropriate PlayStation customer service number which can be found on the customer registration card, within every PlayStation software manual and on our website www.scee.com
® and PlayStation®2 format
®2 console.
®2 console
a TV set
5
Connecting to a VCR
Connect your PlayStation®2 console to your VCR using the AV cable (integrated audio/ video) (sold separately) matching the plug colours to the jacks on the VCR. If your VCR is monaural, do not connect the red plug. However, when playing a DVD video, do not connect the console to a VCR. If you do, the colour is disturbed. Connect the console directly to the TV.
After connecting
Set your TV and VCR adjustments appropriately. Refer to the instruction manuals for your TV and VCR.
When playing a DVD video
VCR
PlayStation
console
2
®
Connecting to a TV with an S VIDEO input connector
Connect your PlayStation®2 console to the S VIDEO input connector on the TV using the SCPH-10060 E S VIDEO cable (sold separately) for a higher quality picture.
After connecting
Set your TV to the appropriate video input mode (such as “S VIDEO”).
To S VIDEO input
To audio input (left)
To audio input (right)
Connecting to a TV with an aerial input
Connect your PlayStation®2 console to the aerial input on the TV using the SCPH-10072 B RFU adaptor (sold separately). In this case, the sound will be monaural.
After connecting
Tune your TV to channel 36.
To aerial input
TV
Connect directly
To AV MULTI OUT connector
To AV MULTI OUT connector
Connecting to a TV with a Euro-AV Connector using the Euro-AV Connector Plug
Connect your PlayStation®2 console to the Euro-AV connector (SCART) on the TV using the Euro-AV connector plug and AV Cable (integrated audio/video), making sure you match the colour-coded plugs of the AV Cable to the matching jacks of the connector plug.
After connecting
Set your TV to the appropriate video input mode. Refer to the instruction manual of your TV.
To Euro-AV Connector
To AV MULTI OUT connector
Connecting to a TV with a Euro-AV connector using the Euro-AV Cable
You can improve picture quality by using the Euro-AV Cable SCPH-10142 (sold separately). Connect your PlayStation®2 console to the Euro-AV Connector on the TV.
After connecting
Set your TV to the appropriate video input mode. Refer to the instruction manual of your TV.
Note
Euro-AV cable supports the video output of PlayStation®2 and PlayStation
Important!
When viewing DVD videos on your PlayStation®2, use another cable which supports PlayStation output, for example AV cable (integrated audio/video), RFU adaptor or S VIDEO cable.
® format software only.
®2 format video
To Euro-AV Connector
To AV MULTI OUT connector
C
When turning on the console for the first time
The initial setup screen appears. Set “Language,” “Time Zone” and “Daylight Savings Time (Summer Time)” according to the instructions on the screen.
GB
Connection
C
Settings can be adjusted later in the system configuration menu. For details, see menu” on page 7.
“Using the system configuration
6

Connecting digital audio equipment

Connecting other digital devices

This section explains how to connect your PlayStation®2 console to audio equipment with digital connectors (such as Dolby Digital optical (AC-3) output). Using digital receivers and amplifiers, you can enjoy features such as multi-channel sound and surround sound.
Connecting to a receiver or amplifier, “MD (Minidisc)” deck or “DAT (Digital Audio Tape)” deck with a digital connector
Hook up a commercially available optical digital cable to your audio equipment. In the system configuration menu, set the “DIGITAL OUT (OPTICAL)” setting to “On.” This is the default setting. For details on the system configuration menu, see page 7.
Rear panel
MAIN POWER
~
AC IN
DIGITAL OUT
Notes
• Refer also to the instructions supplied with the
• You cannot directly make digital audio recordings of
AV MULTI OUT
(OPTICAL)
equipment to be connected.
discs recorded in Dolby Digital, DTS or MPEG AUDIO format using an MD or a DAT deck.
Receiver or amplifier, MD deck or DAT deck
DIGITAL INPUT
OPTICAL
Connecting to audio equipment with a built-in DTS*, Dolby Digital** or MPEG decoder (DVD video only)
By connecting to audio equipment with a built­in DTS, Dolby Digital or MPEG decoder (sold separately), you can playback sound recorded on your DVD video in Dolby Digital (AC-3), DTS or MPEG AUDIO format to reproduce the effect of listening in a movie theatre or concert hall.
Connect the equipment via the DIGITAL OUT (OPTICAL) connector using an optical digital cable (sold separately).
console
2
®
Optical digital cable (sold separately)
Speakers
PlayStation
Audio equipment with a built-in DTS, Dolby Digital or MPEG decoder
Setups for the DVD player on your PlayStation
Some setup adjustments are necessary for the DVD player depending on the equipment to be connected. For details on using the setup display, see page
15.
• When you connect an audio equipment with a built-in DTS decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “DTS” to “On” in the “Audio Setup” display.
• When you connect an audio equipment with a built-in Dolby Digital decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “Dolby Digital” to “On” in the “Audio Setup” display.
• When you connect an audio equipment with a built-in MPEG decoder
Set “DIGITAL OUT (OPTICAL)” to “On” and then set “MPEG” to “On” in the “Audio Setup” display.
Note
Refer to the operating and setup instructions for the audio equipment to be connected.
* “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
** Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.
2 console
®
Connecting a device using the i.LINK interface
The S400 i.LINK connector on the front of the console can be used to connect an i.LINK­compatible (IEEE 1394) device. Refer also to the instructions supplied with the device to be connected.
The i.LINK connector does not supply power to external devices. Some external devices that require power from the S400 i.LINK connector will not function properly when connected to your PlayStation®2 console.
The PlayStation®2 S400 i.LINK connector on your console supports transfer rates up to 400 Mbps. However, the transfer rate will vary, depending upon the actual transfer rate of the connected i.LINK-compatible device.
S400 i.LINK connector
Note
Not all i.LINK products work with PlayStation®2 computer entertainment system. Refer also to the appropriate i.LINK product’s user manual for more information.
i.LINK is a trademarked version of the IEEE 1394-1995 standard and its revisions. i.LINK and the i.LINK logo “
” are trademarks.
Connecting a device using the Universal Serial Bus (USB) interface
The USB connector ports on the front of the console can be used to connect a USB­compatible device. Also refer to the instructions supplied with the device to be connected.
USB connector
Note
Not all USB-compatible products work with the PlayStation appropriate USB-compatible product’s user manual for more information.
2 computer entertainment system. See the
®

Using the Main Menu

7
When turning on the console without first inserting a disc, the main menu appears on the TV screen.
You can move to the system configuration menu or the browser screen from the main menu.
Using the system configuration menu
Using the system configuration menu, you can access the system setup for your PlayStation®2 console. These settings are not cancelled even if you turn off the console.
1...... Select “System Configuration” using the
up and down directional buttons and press the button. The system configuration menu appears on the TV screen.
2...... Select the item you want using the up and
down directional buttons and press the button.
The default settings are underlined.
x Clock Adjustment
Sets the clock.
1...... Use the up and down directional buttons
to set the month and then press the right directional button. Use the same method to set the day, year, hour, minute and second. To return to the previous menu, press the left directional button.
2...... Press the button in time with an
accurate clock.
You can select optional settings for the clock
Select “Clock Adjustment” using the up and down directional buttons and press the ¢ button. You can set the optional items.
Time Format
•24 hour clock
•12 hour clock
Date Format
•DD/MM/YYYY
•YYYY/MM/DD
•MM/DD/YYYY
Time Zone
Select your country and, if necessary, your city to set the time zone.
Daylight Savings Time (Summer Time)
Set this item to “Daylight Savings Time (Summer Time)” when the daylight savings time is in effect.
•Standard (Winter Time)
•Daylight Savings (Summer Time)
x Screen Size
Selects the display mode according to the TV to be connected.
•4:3 : select this when you connect a standard TV to the console.
•Full : select this when you connect a standard TV to the console. The black margins on the upper and lower portions of the screen are cut off.
•16:9 : select this when you connect a wide­screen TV to the console.
x DIGITAL OUT (OPTICAL)
Selects output signals via the DIGITAL OUT (OPTICAL) connector.
•On : normally select this position.
•Off : when the console does not output sound signals via the DIGITAL OUT (OPTICAL) connector, the influence of the digital circuit upon the analog circuit is at a minimum.
x Component Video Out
If your TV, monitor or projector has a RGB input connector or component video input connectors (Y, CB/PB, CR/PR) that conform to the output signals of the console, set this item. When connecting the console using the supplied AV cable (integrated audio/video) or S VIDEO cable (sold separately), you do not need to set this item.
RGB : select this when you connect the console to the RGB input connector on your TV.
•Y Cb/Pb Cr/Pr : select this when you connect the console to the component video input connectors on your TV.
Note
You can output PlayStation® and PlayStation®2 format software in either RGB or Y Cb/Pb Cr/Pr format. However, the PlayStation override the “Component Video Out” setting in the system configuration menu and output all DVD video software in Y Cb/Pb Cr/Pr. The colour is disturbed when you set this item to “RGB” and play the DVD.
®2 console has been designed to
x Language
Selects the language for the on-screen display.
•English
•French
•Spanish
•German
•Italian
•Dutch
•Portuguese
Using the browser screen
You can do the following operations using the browser screen.
•Checking/copying/deleting game data on a Memory Card (8MB) (for PlayStation®2) or Memory Card
•Starting PlayStation® or PlayStation®2 format software
•Playing an audio CD
•Playing a DVD video
Select “Browser” using the up and down directional buttons and press the button. The browser screen appears on the TV screen. The Memory Card (8MB) (for PlayStation®2) , Memory Card or discs inserted in the console are displayed as icons.
Checking/copying/deleting game data
You can copy game data from one Memory Card (8MB) (for PlayStation®2) or Memory Card to another or delete data you no longer wish to keep. You cannot, however, copy game data of the PlayStation®2 format software to the SCPH­1020 E Memory Card. Insert the Memory Card (8MB) (for PlayStation®2) or Memory Card in advance.
1...... Select the icon of the Memory Card (8MB)
(for PlayStation®2) or Memory Card where the game data you want to check/copy/ delete is saved, and then press the button.
2...... Check/copy/delete game data according
to the instructions on the screen.
Note
While copying or deleting game data, do not remove the Memory Card (8MB) (for PlayStation
®2) or Memory Card.
Checking version information
You can check the version of the console, browser, CD player, PlayStation® driver and DVD player.
Press the ¢ button in the main menu.
Auto-diagnosis function
The PlayStation®2 console has an auto-diagnosis feature that automatically adjusts the settings of the DVD player for the best possible performance. Use the auto-diagnosis feature to update the DVD player settings when you experience trouble in playing DVD videos.
1...... Select “Console” using the up and down
directional buttons and press the ¢ button.
2...... Select “On” using the up and down
directional buttons and press the button.
3...... Insert a disc.
The console automatically starts the diagnosis.
Note
The diagnosis setting automatically returns to “Off” (default setting) when you press the 1/RESET button or start playing a PlayStation format disc or a DVD video disc.
Setting the PlayStation® Driver
The “PlayStation® Driver” is a programme for loading PlayStation® format software.
1...... Select “PlayStation
and down directional buttons and press the ¢ button.
2...... Select the item you want using the up and
down directional buttons and press the button.
Disc Speed
•Standard : normally select this position.
•Fast : loading time for a PlayStation® format software disc can be shortened. Depending on the software, there may be no effect or the software may unexpectedly fail. In this case, select “Standard.”
Texture Mapping
•Standard : normally select this position.
•Smooth : you can make the display smoother when playing certain PlayStation® format software titles. Depending on the software, there may be no effect. In this case, select “Standard.”
Note
The “PlayStation® Driver” setting automatically returns to “Standard” (default setting) when you press the 1/ RESET button or turn off the console.
format disc, PlayStation®2
®
Driver” using the up
®
GB
Connection
8

Playing a game

Starting a game
1
Turn on the console using the MAIN POWER switch on the back of the console.
The 1 (standby) indicator on the front of the console lights up in red to indicate that the console is now in standby mode.
2
Press the 1 (standby)/RESET button.
The 1 indicator turns green and the start-up screen appears.
3
Plug
the
Analog Controller (DUALSHOCK Controller (DUALSHOCK the console.
2) or Analog
®
) into
®
1
4
Press the A (open) button.
The disc tray opens.
5
Place a disc on the disc tray with the label side facing up.
6
Press the A button.
The disc tray closes. Screen 2 or 3 appears and the game is ready to begin.
Note
Set the Analog Controller (DUALSHOCK®2) or Analog Controller (DUALSHOCK the software (page 9). See the appropriate software manual for details.
) to the appropriate mode for
®
Screens that appear at start-up
When turning on the console without first inserting a disc
Screen 1 appears.
•When you insert a PlayStation®2 or PlayStation® format disc after screen 1 has appeared, screen 2 or 3 will appear and you can start the game.
•You can move to the system configuration menu or the browser screen from screen 1. (For details, see “Using the Main Menu” on page 7.)
When turning on the console with a disc already inserted
Depending on the type of disc inserted, screen 2, 3 or 4 will appear. If screen 4 appears, it is possible that the inserted disc is not a PlayStation® or PlayStation®2 format disc. Check the disc type (page 3).
1 No disc is inserted (main menu).
3
PlayStation® format CD-ROM is inserted.
4 A disc that cannot be played with the
PlayStation
2 console is inserted.
®
Ending a game
1...... Press the A button.
The disc tray opens.
2...... Remove the disc.
3
2
4,6
5
Restarting a game
Press the 1/RESET button very briefly. (Be sure not to hold the button down for any length of time, as this will put the console in standby mode.) Be careful not to accidentally press the 1/ RESET button while playing a game, or the game will restart.
2 PlayStation
CD-ROM is inserted.
2 format DVD-ROM /
®
3...... Press the A button.
The disc tray closes.
4...... Press the 1/RESET button for about two
seconds. The 1 indicator turns red and the console enters standby mode.
4
1,3
2
Loading...
+ 16 hidden pages