Sony SCPH-10174 Instruction M

DVD Remote Control

(for PlayStation®2) with IR Receiver Unit

PlayStation®2

專用

DVD

遙控器

（內附紅外線接收系統）

DVD 리모컨 키트

(PlayStation®2 전용)

Instruction Manual

Thank you for purchasing the DVD remote control (for PlayStation®2) with IR Receiver Unit. Before using this product, carefully read this manual and retain it for future reference. This DVD remote control is exclusively for use with the PlayStation

使用說明書

感謝您購買 PlayStation®2 專用 DVD 遙控器（內附紅外線接收系統）。在使用本產品以前，請先詳細閱讀本使用說明書，並妥善保存，以備將來參考之用。本遙控器只對應 PlayStation

사용 설명서

DVD 리모컨 키트(PlayStation®2 전용)를 구입해 주셔서 감사합니다. 본 DVD 리모컨은 PlayStation 있습니다. 본 제품을 사용하시기 전에 사용 설명서를 잘 읽어보시고, 나중에 참 조하실 수 있도록 잘 보관하십시오.

®2 computer entertainment system.

®2 電腦娛樂系統。

®2 컴퓨터 엔터테인먼트 시스템에만 사용할 수

SCPH-10174

3-069-287-41(1)

Precautions

This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To ensure accident-free operation, be sure to follow these guidelines.

• Do not use the device if it functions in an abnormal manner.

• Keep the IR receiver unit (for PlayStation®2) in a place out of the reach of small children. If swallowed, the IR receiver unit can cause choking.

• Never disassemble or modify the DVD remote control or IR receiver unit.

• Keep the DVD remote control and IR receiver unit away from heat and dust, and from smoky, greasy or humid locations.

• Do not leave the DVD remote control or IR receiver unit on the floor.

• Do not allow liquid or small particles to get into the DVD remote control or IR receiver unit.

• Dispose of all packaging materials and worn-out products properly.

• If the device does not function properly, contact the appropriate PlayStation® customer service number in each country/area.

Table of contents

Precautions .................................... 2

Setup ...................... 4

Before use .......................................... 4

Notes on use ....................................... 4

Inserting batteries into the

DVD remote control (for PlayStation

Attaching the IR receiver unit

(for PlayStation

®2) ....................... 5

®2) ....................... 6

Viewing a DVD

video ...................... 7

Playback of a DVD video .................. 7

When the DVD video is

finished ......................................... 8

Operating the DVD Player ................. 8

Operating with the Control Panel ...... 9

Operating with the DVD remote control

(for PlayStation

Playback from the last stopping

point (Resume Play) ................... 15

Playback in desired order

(Program Play) ........................... 16

Playback in random order

(Shuffle Play).............................. 18

Repeated playback

(Repeat Play) .............................. 19

Repeated playback of a selected

section (AyB Repeat) ............. 20

®2) ..................... 13

Using the Control

Panel .................... 21

Selecting a specific scene for

playback ...................................... 22

Displaying title and chapter

numbers ...................................... 23

Finding a particular point on

a disc (Search) ............................ 24

Troubleshooting ... 25

Specifications ...... 27

Setup

Before use

Please confirm that you have the following items:

• DVD remote control (for PlayStation®2) (1)

• IR receiver unit (for PlayStation

• Size AAA batteries (2)

• Instruction manual (1)

If any items are missing, please contact the appropriate PlayStation® customer service number in each country/area.

Notes on use

• Some PlayStation®2 or PlayStation® format software may not function properly when operated using the DVD remote control (for PlayStation®2).

• The DVD remote control will not work if you push more than one button at a time.

• Two or more DVD remote controls or IR receiver units should not be used at the same time.

• Do not expose the DVD remote control or IR receiver unit to high temperatures, high humidity or direct sunlight (use in an environment where temperatures range 5°C - 35°C/41°F - 95°F).

• Do not put heavy objects on the DVD remote control or IR receiver unit.

• Do not throw or drop the DVD remote control or IR receiver unit, or subject either item to strong physical shock.

• Do not touch the metal parts or insert foreign objects into the IR receiver unit.

• When cleaning the DVD remote control or IR receiver unit, use a soft, dry cloth. Do not use paint thinner, solvents or other chemicals.

• Static, non-moving images, such as DVD menus, configuration displays, or images “paused” may leave a faint image permanently on the TV screen if left on for extended periods of time. Projection TVs are more susceptible to this than other types of displays. Do not operate the PlayStation®2 console in such a manner that this could occur.

®2) (1)

• If you view DVD video with DVD Player (for PlayStation®2) earlier than version 2.00, some functions of the DVD remote control will not be available. To confirm the version of your DVD Player, press the button in the Main menu, and check the "DVD Player" field of the "Version Information" screen. For details, refer to the instruction manual for the PlayStation®2 console.

Inserting batteries into the DVD remote control (for PlayStation®2)

Insert the two size AAA batteries (supplied) into the DVD remote control paying attention to the plus and minus ends (polarity) as indicated in the battery compartment.

Notes

• Incorrect use of batteries can result in battery content leakage or explosion. When using batteries, be sure to abide by the following instructions: – Make sure that the plus and minus ends of the batteries are inserted in the

correct directions. – Do not mix old and new or different types of batteries. – Do not attempt to recharge non-rechargeable type batteries. – Remove the batteries when the DVD remote control will not be used for an

extended period of time. – If battery contents have leaked, be sure to carefully remove all residue before

inserting new batteries.

• When using the DVD remote control, be sure that the IR receiver of the IR receiver unit is not in direct sunlight or exposed to other strong light. The DVD remote control may not function properly under such conditions.

Setup (continued)

Attaching the IR receiver unit (for PlayStation®2)

Holding the IR receiver unit with the arrow mark facing up, securely insert the connector into a controller port of the PlayStation®2 console.

IR receiver unit (for PlayStation®2)

IR receiver

Note

When using the IR receiver unit for the first time, be sure to remove the protective scratch resistant film before inserting the unit into the PlayStation

®2 console.

Viewing a DVD video

Playback of a DVD video

1 Press the MAIN POWER switch on the PlayStation®2 console

rear to turn the console on.

2 Press the 1 (standby)/RESET button. 3 Press the A (open) button. 4 Insert the DVD video you would like to play into the disc tray

with the label side facing up (data side down).

5 Press the A button.

The disc tray will close and playback will begin.

Notes

• With some discs, playback will not begin immediately, but a Title menu or DVD menu will be displayed.

• After the DVD video has finished playing, press the A button on the console to eject the disc and display the browser screen.

• If the power is turned off during playback, any optional settings you have made will be lost.

Viewing a DVD video (continued)

Notes on the playback of DTS audio from a DVD video

DTS audio signal can only be output through an optical digital cable (sold separately). Please note that it cannot be output through a regular audio cable.

• Do not set the “DTS” option of “Audio Digital Out” under “Audio Setup” to “On” when using an audio component that does not have a built-in DTS decoder. In such cases, if you play a DTS audio track, a loud noise (or no noise) will come from the speakers, possibly hurting your ears or damaging the speakers.

• When the “DTS” option of “Audio Digital Out” under “Audio Setup” is set to “Off”, the DVD’s DTS audio output will not be played back, even if you connect with an optical digital cable.

When the DVD video is finished

1 Press the A (open) button on the PlayStation®2 console. 2 Remove the disc. 3 Press the A button. 4 Press and hold the 1 (standby)/RESET button for about two

seconds.

Note: After changing DVD settings

To save your changes, be sure to eject the DVD before pressing the 1/RESET button or turning off the console with the MAIN POWER switch. Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD.

Operating the DVD Player

The DVD Player can be operated in the following three ways:

• through the on-screen Control Panel

• directly with the DVD remote control

• directly with the analog controller (DUALSHOCK®2).

For details, refer to “Playing a DVD video” in the PlayStation®2 console instruction manual.

Notes

• Depending on the disc used, some operations may vary or may not be possible.

• The method of operation for certain functions may vary depending on whether the IR receiver unit is inserted into the PlayStation®2 console or not.

Operating with the Control Panel

The Control Panel can be used to search for a specific scene, to playback scenes in a different order, to change viewing angle, and so on. The actual functions available may vary from disc to disc. For more information on the Control Panel, see the detailed explanations in the PlayStation®2 console instruction manual.

Direct item selection is also available.

A number of items can be directly selected using the buttons of the DVD remote control. In this case, only the selected items will be displayed. For more details, see “Using the DVD remote control (for PlayStation®2)” on page 13.

AUDIO

SHUFFLE

123

ANGLE

PROGRAM

456

SUBTITLE

REPEAT

7809

CLEAR TIME

SLOW

SCAN

PREV A BNEXT

DISPLAY button

Up, down, right and left directional buttons

SELECT button

PLAY STOPPAUSE

TITLE

SELECT START

PLAYSTATION

ENTER

DVD MENU

ENTER

DVD/

button

RETURNDISPLAY

a button (cancel)

✕ button (enter)

Viewing a DVD video (continued)

1 Press the DISPLAY or SELECT button of the DVD remote

control.

The Control Panel is displayed on the screen.

2 Use the directional buttons to move to the desired item. 3 Press the ✕ (enter) button.

Note

The ✕ button and the ENTER button of the DVD remote control can all be used as the ENTER button. For convenience, this manual will explain using the ✕ button only.

1 DVD Menu

Displays the DVD menu.

2 Title Menu

Displays the Title menu.

3 O Return

Returns to the previously displayed screen.

4 Audio Options

Displays and changes audio options.

5 Angle Options

Displays and changes viewing angle options.

6 Subtitle Options

Displays and changes subtitle options.

7 Go to Title

You can skip to a different title or chapter by specifying the elapsed time or selecting the title or chapter number with the number buttons.

Viewing a DVD video (continued)

8 Setup

Using the Setup display, you can change the initial settings, adjust the picture and sound, and set various other output options. For DVD viewing, you can also choose a language for subtitles, restrict playback by children, and so on.

9 Chapter Display

While playing a disc, the current title and chapter numbers can be displayed.

0 Help

Displays the direct button functions of the Analog Controller (DUALSHOCK®2).

qa Go to Chapter/Number Buttons

The desired chapter number or numerical value can be selected.

qs . Previous

Skips back to the beginning of the current or previous chapter.

qd / Search

You can locate a particular point on the DVD quickly by monitoring the picture.

qf > Next

Skips to the beginning of the next chapter.

qg N Play

Selects playback.

qh X Pause

Momentarily stops playback.

qj x Stop

Stops playback of the DVD.

qk Slow

Selects slow playback of the on-screen image.

Operating with the DVD remote control (for PlayStation®2)

AUDIO

SHUFFLE

123

ANGLE

PROGRAM

456

SUBTITLE

REPEAT

7809

CLEAR TIME

SLOW

SCAN

PREV A BNEXT

PLAY STOPPAUSE

DVD MENU

ENTER

SELECT START

DVD/

PLAYSTATION

RETURN

DISPLAY TITLE

1 AUDIO button

Displays and changes audio options.

2 PROGRAM button

Selects programmed playback.

3 ANGLE button

Displays and changes viewing angle options.

4 REPEAT button

Selects repeated playback.

5 SUBTITLE button

Displays and changes subtitle options.

6 CLEAR button

Clears selected numbers or playback modes.

7 / SLOW buttons

Select slow playback of the on-screen image.

8 / SCAN buttons

You can locate a particular point on the DVD quickly by monitoring the picture.

Viewing a DVD video (continued)

9 ./> PREV/NEXT buttons

Skip to the beginning of either the previous or next chapter.

0 H PLAY button

Selects playback.

qa TITLE button

Displays the Title menu.

qs DISPLAY button

Displays the Control Panel.

qd Directional buttons

Used to select items from the on-screen display.

qf SHUFFLE button

Selects playback in a random order.

qg Number buttons

Allow for numerical selection of items in the on-screen display.

qh TIME button

Displays the playing time.

qj AyB button

Selects repeated playback of a specific section.

qk X PAUSE button

Momentarily stops playback.

ql x STOP button

Stops playback of the DVD.

w; DVD MENU button

Displays the DVD menu.

wa O RETURN button

Returns to the previously displayed screen.

ws ENTER button

Enters the item selected on the screen.

wd Buttons identical with those on the analog controller

(DUALSHOCK®2) perform the same functions as the matching controller buttons.

Playback from the last stopping point (Resume Play)

1 During playback, press the x STOP or a button on the DVD

remote control to stop play.

The message, “Press [Play] to resume viewing. To start from the beginning, press [Stop] and then [Play].” will appear on the screen.

2 Press the H PLAY button on the DVD remote control.

Playback begins from the point in step 1 where it was stopped.

Using the Control Panel

1 During playback, use the directional buttons to move to the

x (Stop) icon of the Control Panel and press the ✕ button to stop playback.

2 Select the N (Play) icon and press the ✕ button.

Playback begins from the point in step 1 where it was stopped.

Notes

• To play the disc from the beginning, press x one more time after stopping playback, then press H.

• Resume Play may not be available on some DVD discs.

• Depending on where you stopped the disc, the console may resume play from a slightly different point.

• The recording of the point where playback was stopped is cleared when: – you open the disc tray – you shift to standby mode by pressing and holding down the 1 (standby)/

RESET button – you turn the power off using the MAIN POWER switch on the console rear – you start playback after selecting a title or chapter.

Viewing a DVD video (continued)

Playback in desired order (Program Play)

You can set the DVD to play scenes in any order you like by arranging the order of titles or chapters on this screen. This function can be accessed only with the DVD remote control.

1 Press the PROGRAM button. 2 Select the item number and press the ✕ button. 3

Use the directional buttons to select the number of the title that

includes the desired chapter and press the ✕ button.

4 Use the directional buttons to select the number of the

desired chapter and press the ✕ button.

5 Repeat steps 3 and 4 to continue arranging the desired

order of titles.

6 Press the H PLAY button.

Program Play begins.

To end Program Play

Press the CLEAR button.

To change Program Play settings

1 In step 2, select the number of the item to be changed and

press the ✕ button.

Settings can be changed while Program Play is in use. Please note,

however, that the item currently in play cannot be changed.

Repeat steps 3 and 4 above to enter new settings.

To clear Program Play settings

To cancel all settings, select “Clear all” in step 2 at the top of this page. To cancel settings one-by-one, stop play and use the directional buttons in step 3 to select the item to be cleared. Press the ✕ button, select “Clear” and press the ✕ button again to remove the item.

Using Program Play again after playback has finished

The same programmed sequence can be viewed again by pressing the H PLAY button.

Repeat Play and Shuffle Play can be selected during Program Play

During Program Play, press the REPEAT or SHUFFLE button. For more details, see “Playback in random order (Shuffle Play)” on page 18, or “Repeated playback (Repeat Play)” on page 19.

Notes

• Program Play is not available on some DVD discs.

• Only the numbers of titles and chapters recorded on the disc are displayed.

• Program Play settings are cleared when: – you open the disc tray – you reset the console by pressing the 1 (standby)/RESET button – you shift to standby mode by pressing and holding down the 1/RESET button – you turn the power off using the MAIN POWER switch on the console rear.

• By setting Program Play, AyB Repeat is cancelled.

Viewing a DVD video (continued)

Playback in random order (Shuffle Play)

Playback of the DVD is done in a random order with no relation to the original title and chapter numbers. This function can be accessed only with the DVD remote control.

Press the SHUFFLE button.

With each press of the button, the display cycles among “Title Shuffle,” “Chapter Shuffle,” and “Shuffle Off.”

To end Shuffle Play

Select “Shuffle Off” or press the CLEAR button.

Shuffle Play can be set even when the disc is not playing.

Press the SHUFFLE button and choose the desired setting. Then press the H PLAY button to begin playback in Shuffle Play mode.

Program Play or Repeat Play functions can be selected during Shuffle Play.

During Shuffle Play, press the PROGRAM or REPEAT button. For more details, see “Playback in desired order (Program Play)” on page 16, or “Repeated playback (Repeat Play)” on page 19.

Notes

• Shuffle Play may not be available on some DVD discs.

• Shuffle Play is cleared when: – you display the DVD menu or Title menu – you open the disc tray – you turn the power off using the MAIN POWER switch on the console rear.

• By setting Shuffle Play, AyB Repeat is cancelled.

• When “Chapter Shuffle” is selected, up to 200 chapters on the disc are played

back in random order.

Repeated playback (Repeat Play)

All of the titles on the DVD, or one title or chapter can be repeatedly played back with Repeat Play. When used in combination with Shuffle or Program Play, this function will repeat the Program or Shuffle Play order. This function can be accessed only with the DVD remote control.

Press the REPEAT button.

With each press of the button, the display cycles among “Disc Repeat,” “Title Repeat,” “Chapter Repeat,” and “Repeat Off.”

To end Repeat Play

Select “Repeat Off” or press the CLEAR button.

Repeat Play can be set even when the disc is not playing.

Press the REPEAT button and choose the desired setting. Then press the H PLAY button to begin playback in Repeat Play mode.

Program Play or Shuffle Play can be selected during Repeat Play.

During Repeat Play, press the PROGRAM or SHUFFLE button. For more details, see “Playback in desired order (Program Play)” on page 16, or “Playback in random order (Shuffle Play)” on page 18.

Notes

• Repeat Play may not be available on some DVD discs.

• Repeat Play is cleared when: – you open the disc tray – you turn the power off using the MAIN POWER switch on the console rear.

• By setting Repeat Play, AyB Repeat is cancelled.

Viewing a DVD video (continued)

Repeated playback of a selected section (A

During playback, you can set a specific section of the disc for repeated playback. This is convenient for language studies, learning a new song, and many other situations. This function can be accessed only with the DVD remote control.

B Repeat)

1 Press the AyB button at the starting point (point A) of the

section for repeated playback.

The starting point is set.

2 Press the AyB button again at the ending point (point B) of

the section for repeated playback.

The selected section begins repeated playback.

To cancel AyB Repeat

Press the CLEAR button.

Notes

•AyB Repeat may not be available on some sections of some DVD discs.

• Only one section can be selected for AyB Repeat at a time.

•AyB Repeat is cleared when: – you press the x button twice – you display the DVD menu or Title menu – you open the disc tray – you turn the power off using the MAIN POWER switch on the console rear.

• Setting AyB Repeat cancels Shuffle Play, Repeat Play and Program Play.

Using the Control Panel

The DVD remote control allows you to use various functions with the Control Panel. When using the DVD remote control, some additional functions can be accessed compared to those available when using the Analog Controller (DUALSHOCK®2). These additional features are described in pages 22 to 24.

Regarding those functions of the Control Panel that can be accessed both by the DVD remote control and the Analog Controller (DUALSHOCK®2), these are described in the PlayStation®2 console instruction manual. The functions are:

• Using the DVD menu

• Using the Title menu

• Changing the audio language

• Changing the viewing angles

• Displaying subtitles

• Displaying the list of the direct buttons

Refer to “Using various functions with the Control Panel” in the PlayStation®2 console instruction manual for details.

Using the Control Panel (continued)

Selecting a specific scene for playback

When the IR receiver unit is connected to the console, you can search for a scene to be played back by specifying the title number, chapter number and elapsed time.

1 While playing a disc, select the (Go to Title) icon using

the directional buttons and press the ✕ button.

2 Select the appropriate item using the directional buttons and

press the ✕ button.

• Title = Specify the title number.

• Chapter = Specify the chapter number.

•C -:-:- (or T -:-:-) = Specify the elapsed time for chapter (or title).

3 Input numbers for the fields listed above using the number

buttons of the DVD remote control.

Playback of the selected scene is started.

When the IR receiver unit is not connected to the console

You can specify only the title number.

1 While playing a disc, select the (Go to Title) icon using

the directional buttons and press the ✕ button.

2 Select the number of the title to be played back using the

directional buttons.

In some cases, you can specify the chapter number using the number buttons of the Control Panel.

Note

You cannot select a scene by specifying the remaining time of the chapter or title (only elapsed time can be used).

Displaying title and chapter numbers

While playing or pausing a disc, select the (Chapter Display) icon using the directional buttons and press the ✕ button.

The display is turned on or off each time you press the ✕ button.

To display the elapsed time and remaining time

Press the TIME button on the DVD remote control several times. Each time you press this button, the display beside the title number and chapter number changes as follows: Elapsed time of the current chapter t Remaining time of the current chapter t Elapsed time of the current title t Remaining time of the current title t Display off t Title and chapter number t Elapsed time of the current chapter t ... C -:-:- = Elapsed time of the current chapter. C – -:-:- = Remaining time of the current chapter. T -:-:- = Elapsed time of the current title. T – -:-:- = Remaining time of the current title.

When the IR receiver unit is not connected

You can display only the current title and chapter numbers.

Using the Control Panel (continued)

Finding a particular point on a disc (Search)

While playing a disc, you can locate a particular point on the disc quickly by using Search forward or Search backward.

Note

The Search function is not available on some DVD discs.

To search for a point using Search forward or Search backward

1 While playing a disc, select the (Search forward) or the

(Search backward) icon using the directional buttons and press and hold down the ✕ button.

2 When you find the desired point, release the ✕ button.

You can search for a point directly

Press the or SCAN button of the DVD remote control and watch until you find the point you are looking for. When you find the desired point, press the H PLAY button. Each time you press the speeds).

To search by slow-motion play

1 While playing a disc, select the (Slow) icon using the

directional buttons and press the ✕ button.

Slow-motion play is started.

2 When you find the desired point, select the N (Play) icon

and press the ✕ button.

Normal speed play is resumed.

SCAN button, the search speed changes (three

You can choose slow-motion play directly

Press the or SLOW button on the DVD remote control and watch until you find the point you are looking for. When you find the desired point, press the H PLAY button.

+ 56 hidden pages

Sony SCPH-10174 Instruction M

Specifications and Main Features

Frequently Asked Questions

User Manual