KDL-60EX703
Table of contents
Loading...
4-180-171-13(1)
LCD
Digital Colour TV
Operating Instructions
Setting Up
Watching TV
Additional Information
KDL-60EX703 / 52EX703 / 46EX703 / 40EX703 / 40EX603 / 32EX703 / 32EX603
NOTICE FOR
CUSTOMERS IN
THE UNITED
KINGDOM
A moulded plug complying with BS1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug s upplied need to
be replaced with the same rating of fuse
approved by ASTA or BSI to BS 1362 (i.e.,
marked with or ) must be used.
When an alternative type of plug is used it
should be fitted with the same rating of
fuse, otherwise the circuit should be
protected by a 10 AMP FUSE at the
distribution board.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach
the fuse cover after you change the fuse.
Never use the plug without the fuse cover.
If you should lose the fuse cover, please
contact your nearest Sony service station.
FUSE
Notes on Digital TV
function
• Any functions related to Digital TV
( ) will only work in countries or
areas where DVB-T (MPEG-2 and
H.264/MPEG-4 AVC) digital terrestrial
signals are broadcast or where you have
access to a compatible DVB-C (MPEG2 and H.264/MPEG-4 AVC) cable
service. Please confirm with your local
dealer if you can receive a DVB-T signal
where you live or ask your cable
provider if their DVB-C cable service is
suitable for integrated operation with
this TV.
• Your cable provider may charge a fee for
their services, or require you to agree to
its terms and conditions of business.
• This TV set complies with DVB-T and
DVB-C specifications, but compatibility
with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts are not
guaranteed.
• Some Digital TV functions may not be
available in some countries/areas and
DVB-C cable may not operate correctly
with some providers.
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
• Instructions about “Installing Wall
Mount Bracket” are included within this
TV’s instructions manual.
• The illustrations used in this manual are
of the KDL-40EX703 series unless
otherwise state.
Trademark information
is a registered trademark of the DVB
Project.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
DLNA and DLNA CERTIFIED are
trademarks and/or service marks of Digital
Living Network Alliance.
DivX® is a video file compression
technology, developed by DivX, Inc.
DivX, DivX Certified, and associated
logos are trademarks of DivX, Inc. and are
used under license.
ABOUT DIVX VIDEO: DivX® is a
digital video format created by DivX,Inc.
This is an official DivX Certified device
that plays DivX video. Visit
www.divx.com for more information and
software tools to convert your files into
DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Video-onDemand (VOD) content. To generate the
registration code, locate the DivX VOD
section in the device setup menu. Go to
vod.divx.com with this code to complete
the registration process and learn more
about DivX VOD.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“BRAVIA” and are
trademarks of Sony Corporation.
” and “XrossMediaBar” are
“XMB
™
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
FUSE
How to replace the fuse
Open the fuse compartment with a blade
screwdriver, and replace the fuse.
Please refer to the illustration that actually
equipped with the product.
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
Germany. For any service or
guarantee matters please refer to the
addresses given in separate service
or guarantee documents.
GB
2
Table of Contents
Checking the accessories ..............................................................................................................3
Inserting batteries into the remote .................................................................................................3
Setting Up
Attaching the Table-Top Stand (except for KDL-60EX703)...........................................................4
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................4
Preventing the TV from toppling over ............................................................................................5
Bundling the cables........................................................................................................................5
Performing the initial set-up ...........................................................................................................6
Detaching the Table-Top Stand from the TV .................................................................................6
Watching TV
To watch programmes ...................................................................................................................7
To utilise the TV’s features ............................................................................................................7
To use i-Manual .............................................................................................................................8
Additional Information
Troubleshooting.............................................................................................................................9
Specifications...............................................................................................................................10
Installing the Accessories (Wall-Mount Bracket)..........................................................................12
TV installation dimensions table ..................................................................................................13
Screw and Hook locations diagram/table.....................................................................................14
Safety Information........................................................................................................................15
Precautions..................................................................................................................................16
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 8).
• Before operating the TV, please read “Safety Information” (page 15). Retain this manual for future reference.
*2For KDL-40/32EX703 and KDL-40/32EX603,
Checking the accessories
AC power cord (mains lead) (1)
Remote (1)
assemble the Table-Top Stand with the supplied
assembling screws.
Refer to the supplied Table-Top Stand leaflet to
assemble the stand.
Size AAA batteries (R3 type) (2)
Cable holder (1)
Stand rear cover (1)*
1
(KDL-40/32EX703 and KDL-40/32EX603
Inserting batteries into the remote
only)
Table-Top Stand (1)*
2
(except for KDL-60EX703)
Fixing screws for stand (M5 × 16) (4)
(except for KDL-60EX703)
Assembling screws for stand (M5 × 16) (4)
(KDL-40/32EX703 and KDL-40/32EX603
only)
*1For KDL-60/52/46EX703, the stand rear cover is
factory-attached to the stand.
Slide the cover to open.
GB
3
Setting Up
Attaching the Table-Top
Stand (except for KDL60EX703)
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with SCART
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4 For KDL-40/32EX703 and KDL-40/
32EX603, after all the screws are
tightened, attach the supplied stand rear
cover to the Table-Top Stand.
Set Top Box/recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with HDMI
Set Top Box/recorder (e.g. DVD recorder)
GB
4
Preventing the TV from toppling over
Bundling the cables
Setting Up
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
GB
5
Performing the initial set-up
KDL-60/52/46/40/
32EX703 only
1 Connect the TV to your AC power
outlet (mains socket).
2 For KDL-60/52/46/40/32EX703, check
the ENERGY SAVING SWITCH
setting is on (
z).
3 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
4
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press .
2 Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
Detaching the Table-Top Stand from the TV
Remove the screws guided by the arrow marks
of the TV.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Do not hold by the stand rear cover while carrying
the Table-Top Stand to prevent dropping the stand
which may cause an injury or damage to the
property.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
GB
6
Loading...