Sony BDV-N990W Users guide [en, zh]

Quick Setup Guide/

快速設定指南

連接揚聲器

將揚聲器導線連接到本機上對應顏色的SPEAKERS插孔。

主機後面板

SPEAKERS

紅色

白色

綠色

紫色

環繞放大器的後面板

藍色

灰色

連接電視機

建議您使用HDMI電纜*1連接系統和電視機。關於其他連接，請參閱使用說明書。

電視機

HDMI電纜*

數位光纖導線*

如果電視機的HDMI插孔與Audio Return Channel（ARC）功能不相容，進行本連接方法可以透過系統欣賞電視機聲音。

主機背面

*1 僅印度、中東、新加坡、泰國和台灣機型提供高速 HDMI電纜。

*2 不提供。

Note

注意



若要欣賞電視機聲音，反覆按FUNCTION鍵選擇“TV”。

詳細資訊，請參閱使用說明書。

續下頁

插圖中使用BDV-N990W機型。

主機

環繞放大器

BDV-N990W/N890W/N790W

(1)

4-418-162-11(1)

For details, refer to the Operating Instructions.

Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.

Connect the speakers/

Rear panel of the main unit/

Green

White

Purple

Red

Rear panel of the surround amplifier

Blue

Gray

We recommend that you connect the system and TV with an HDMI cable*1. For other connections, refer to the Operating Instructions.

Rear of the main unit

Connect your TV/

HDMI cable*

Digital optical cord* If the TV’s HDMI jack is not compatible with the Audio

Return Channel (ARC) function, make this connection to enjoy TV sound via the system.

FRONT L

SUBWOOFER

BDV-N990W is the model used for illustration purposes.

CENTER

SUR L

Main unit

FRONT R

Surround amplifier

SUR R

To enjoy TV sound, press FUNCTION repeatedly to select “TV.”



*1 A High Speed HDMI cable is supplied with India, Middle East, Singapore, Thailand, and Taiwan models only.

*2 Not supplied.

Continued/



執行簡易設置

執行簡易設置前，切勿插入光碟。

將電池裝入遙控器。

將無線收發器插入主機和環繞放大器。

如下圖所示，將無線收發器牢牢完全插入插槽。

EZW-RT50

主機

環繞放大器

將主機、環繞放大器與電視機的交流電源線連接至交流電源插座，然後打開主機與電視機的電源。

連接機上盒

如果您不要使用機上盒，請跳過此步驟。

IN 2IN 1

電視機

此連接在步驟2中已完成。

主機背面

機上盒

*不提供。

HDMI電纜*

Note

注意



若要欣賞機上盒聲音，反覆按FUNCTION鍵選擇“HDMI1”或“HDMI2”。

連線到網路

可使用Wi-Fi連接。若要使用Wi-Fi，請跳過此步驟。

*不提供。

網際網路

ADSL數據機/有線數據機

寬頻路由器

主機背面

LAN電纜*

切換電視機上的輸入選擇器，類似以下畫面的系統螢幕便會出現在電視機螢幕上。

“簡易初始設置”畫面

啟動

使用///和，依照“簡易初始設置”中的畫面指示，執行系統設定。

使用///和，依照“簡易網路設定”中的畫面指示，執行網路設定。

“簡易網路設定”完成時，會出現［簡易網路設定完成。］。

基本設定已完成。關於如何欣賞光碟播放和許多其他功能的詳細資訊，請參閱提供的使用說明書。

關於網路設定的詳細資訊，請參閱以下網站並查看常見問答集：

If you do not use a set-top box, skip this Step.

Connect your set-top box/

Perform Easy Setup

Do not insert a disc before performing the Easy Setup.

4. Switch the input selector on your TV so that system screens like the ones below appear on the TV screen.

This connection is completed in Step 2.

To enjoy set-top box sound, press FUNCTION repeatedly to select “HDMI1” or “HDMI2.”



HDMI cable*

Rear of the main unit

Set-top box

*Not supplied.

1. Insert batteries into the remote.

2. Insert the wireless transceivers into both the main unit and surround amplifier.

Firmly insert the wireless transceiver all the way into the slot, as in the figure below.

Main unit

Surround amplifier

Starting up

“Easy Initial Settings” screen

5. Perform system settings by following the on-screen instructions in “Easy Initial Settings” using

///

and

Wi-Fi connection is available. To use Wi-Fi, skip this Step.

Connect to the network/

Broadband router

LAN cable*

ADSL modem/cable modem

Rear of the main unit

Internet

*Not supplied.

3. Connect the AC power cords of the main unit, surround amplifier, and your TV to the AC power outlet, and then turn on the power of the main unit and your TV.

Perform network settings by following the on-screen instructions in “Easy Network Settings” using

[Easy Network Settings are complete.] appears when “Easy Network Settings” is complete.

///

and

Basic setup is complete. Refer to the supplied Operating Instructions for details on how to enjoy disc playback and many other features.

For further details on network settings, visit the following website and check the FAQ:

http://www.sony-asia.com/section/support

Sony BDV-N990W Users guide [en, zh]

Specifications and Main Features

Frequently Asked Questions

User Manual