Sony BDV-N9200WL, BDV-N7200WL User guide

Blu-ray Disc™/ DVD Home Theatre System

Operating Instructions

4-485-800-13(1)

BDV-N9200W/BDV-N9200WL BDV-N7200W/BDV-N7200WL/BDV-N5200W

WARNING

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 meters. (Europe models only)

On power sources

•The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

•As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/DVD Home Theatre System is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Pick-up unit of this appliance is classified as a CLASS 3R LASER product. Visible and invisible laser radiation is emitted when the laser protective housing is opened, so be sure to avoid direct eye exposure. This marking is located on the bottom exterior of the main unit.

For customers in Europe and Russia

This appliance is classified as a CLASS 1 LASER product. This marking is located on the bottom exterior of the main unit.

For the main unit and surround amplifier

The nameplate is located on the bottom exterior.

Recommended cables

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.

For customers in Europe

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or

0.004% lead. By ensuring these products and batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the

applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.

This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses provided in the separate service or guarantee documents.

Hereby, Sony Corp., declares that BDV-N9200W/BDV-N9200WL/ BDV-N7200W/BDV-N7200WL/ BDV-N5200W/TA-SA700WR/ TA-SA600WR/TA-SA500WR are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/

This product is intended to be used in the following countries. AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IS, IE, IT, LV, LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, GB

5.15 GHz – 5.35 GHz band is restricted to indoor operations only.

This Blu-ray Disc/DVD Home Theatre System is intended for sound and video playback of discs or USB devices, music streaming from an NFC-compatible smartphone or a BLUETOOTH device, and FM tuner. This system also supports network streaming and Screen mirroring.

For customers in Australia

This equipment should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

For customers in Australia and India

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

For customers in Singapore

On watching 3D video images

Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual and/or the caution message of any other

device used with, or Blu-ray Disc contents played with this product and (ii) our website (http://esupport.sony.com/) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images. Adults should supervise young children to ensure they follow the recommendations listed above.

Copy Protection

•Please be advised of the advanced content protection systems used in both Blu-ray Disc and DVD media. These systems, called AACS (Advanced Access Content System) and CSS (Content Scramble System), may contain some restrictions on playback, analog output, and other similar features. The operation of this product and the restrictions placed may vary depending on the date of purchase, as the governing board of the AACS may adopt or change its restriction rules after the time of purchase.

•Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

Copyrights and Trademarks

•This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital Surround System. * Manufactured under license from

Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

** For DTS patents, see

http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

•This system incorporates HighDefinition Multimedia Interface (HDMI™) technology. The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•Java is a trademark of Oracle and/or its affiliates.

•DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.

•“Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”, “BD-LIVE”, “BONUSVIEW”, and logos are trademarks of the Blu-ray Disc Association.

•“Blu-ray Disc”, “DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, and “CD” logos are trademarks.

•“Super Audio CD” is a trademark.

•App Store is a service mark of Apple Inc.

•“BRAVIA” is a trademark of Sony Corporation.

•“AVCHD 3D/Progressive” and the “AVCHD 3D/Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.

• , “XMB”, and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

•“PlayStation” is a registered trademark of Sony Computer Entertainment Inc.

•“Sony Entertainment Network” logo and “Sony Entertainment Network” are trademarks of Sony Corporation.

•Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Software, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either a registered trademark or a trademark of Gracenote, Inc. in the United States and/or other countries.

•Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.

•Wi-Fi CERTIFIED™, WPA™, WPA2™, Wi-Fi Protected Setup™, Miracast™ and Wi-Fi CERTIFIED Miracast™ are trademarks of Wi-Fi Alliance.

• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

•Android™ is a trademark of Google Inc.

• Google Play™ is a trademark of Google Inc.

•“Xperia” is a trademark of Sony Mobile Communications AB.

•The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

•MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

•This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

•Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/ or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRMprotected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReadyprotected content. Revocation should not affect unprotected content or content protected by other content

access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

•DLNA™, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

•All other trademarks are trademarks of their respective owners.

•Other system and product names are generally trademarks or registered trademarks of the manufacturers. ™ and ® marks are not indicated in this document.

End User License Information

Gracenote® End User License Agreement

This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own

personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that

functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. © Gracenote, Inc. 2013

REAL END USER LICENSE AGREEMENT (Singapore, China, Thailand, and Taiwan models only)

1. End users are prohibited from modifying, translating, reverse engineering, decompiling, disassembling or using other means to discover the software developed by Real or otherwise replicate the functionality of the software, except to the extent that this restriction is expressly prohibited by applicable law.

2. Real disclaims all warranties and conditions, express and implied, including implied warranties or conditions of merchantability and fitness for a particular purpose; and effectively exclude all liability for indirect, special, incidental and consequential damages, including but not limited to lost profits or replacement systems.

About These Operating Instructions

•The instructions in these Operating Instructions describe the controls on the remote control. You can also use the controls on the main unit if they have the same or similar names as those on the remote control.

•In this manual, “disc” is used as a general reference for BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations.

•The instructions in this manual are for BDV-N9200W, BDV-N9200WL, BDV-N7200W, BDV-N7200WL and BDV-N5200W. BDV-N9200WL is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “BDV-N9200WL only”.

•Some illustrations are presented as conceptual drawings, and may be different from the actual products.

•The items displayed on the TV screen may vary depending on the area.

•The default setting is underlined.

Table of Contents

About These Operating

Instructions .......................... 8

Unpacking ..................................11

Guide to Parts and Controls ..... 14

Getting Started

Step 1: Installing the

Speakers ......................... 20

Step 2: Connecting the

System ........................... 20

Connecting the speakers ... 21

Connecting the TV ............. 22

Connecting the other

equipment ..................... 23

Connecting the antenna

(aerial) ........................... 25

Step 3: Preparing for Network

Connection ..................... 25

Step 4: Setting up the

Wireless System ............. 26

Step 5: Performing the Easy

Setup .............................. 27

Step 6: Selecting the Playback

Source ............................ 28

Step 7: Enjoying Surround

Sound ............................. 29

Playback

Playing a Disc ........................... 31

Playing from a USB Device .......33

Enjoying Music from a

BLUETOOTH Device ............33

Using Screen mirroring .............35

Connecting to a Remote

Device by One-touch

Function (NFC) ................... 36

Using “SongPal” ....................... 38

Playing via a Network .............. 38

Available Options ..................... 41

Sound Adjustment

Selecting the Audio Format,

Multilingual Tracks, or

Channel .............................. 43

Enjoying Multiplex Broadcast

Sound ................................. 43

Tuner

Listening to the Radio ............. 44

Receiving Radio Data System

(RDS) .................................. 45

Other Operations

Using the Control for HDMI

Function for “BRAVIA”

Sync ....................................45

Calibrating the Appropriate

Speaker Settings

Automatically .....................46

Setting the Speakers ................ 47

Using the Sleep Timer ..............49

Deactivating the Buttons on

the Main Unit ......................49

Changing the Brightness .........49

Enjoying the Visualization on

the TV Screen .....................50

Enjoying Speaker

Illumination ........................50

Saving Power in Standby

Mode .................................. 51

Browsing Websites .................. 51

Further Settings for the

Wireless System .................53

Settings and Adjustments

Using the Setup Display ........... 55

[Software Update] ....................55

[Screen Settings] ......................56

[Audio Settings] .......................58

[BD/DVD Viewing Settings] .....59

[Parental Control Settings] .......60

[Music Settings] ........................60

[System Settings] .....................60

[External Input Settings] ..........62

[Network Settings] ...................62

[Easy Network Settings] ...........63

[Resetting] ................................ 63

Additional Information

Precautions ..............................64

Notes about Discs ....................66

Troubleshooting ....................... 67

Playable Discs .......................... 73

Playable Types of Files .............74

Supported Audio Formats .......76

Specifications ........................... 76

Language Code List .................79

Index ......................................... 81

Unpacking

• Operating Instructions (Oceania, Africa, India, Middle East, Singapore, China, Thailand, Taiwan, and Russia models only)

• Quick Setup Guide

• Speaker Installation Guide

• Reference Guide (Europe models only)

• Remote control (1)

• R03 (size AAA) batteries (2)

• FM wire antenna (aerial) (1)

• Calibration mic (1) (BDV-N9200W/ BDV-N9200WL/BDV-N7200W/ BDV-N7200WL only)

• High Speed HDMI cable (1) (Africa, India, Middle East, Singapore, China, Thailand, and Taiwan models only)

BDV-N9200W/BDV-N9200WL only

• Front speakers (2), Surround speakers (2)

(BDV-N9200W only)

(BDV-N9200WL only)

• Center speaker (1)

• Surround amplifier (1)

• Subwoofer (1)

(BDV-N9200W only)

(BDV-N9200WL only)

• Speaker cords – (5, red/white/gray/blue/green)

(BDV-N9200W only)

– (1, green) (BDV-N9200WL only)

•Bases (4)

• Lower parts of the front and surround speakers (4)

BDV-N7200W/BDV-N7200WL only

• Front speakers (2), Surround speakers (2)

(BDV-N7200W only)

(BDV-N7200WL only)

• Center speaker (1)

• Subwoofer (1)

(BDV-N7200W only)

• Screws (large) (4)

• Screws (small) (12)

(BDV-N7200WL only)

• Speaker cords – (5, red/white/gray/blue/green)

(BDV-N7200W only)

– (1, green) (BDV-N7200WL only)

BDV-N5200W only

• Front speakers (2)

• Stands (for front and surround speakers) (4)

•Screws (8)

• Surround speakers (2)

• Center speaker (1)

• Subwoofer (1)

Guide to Parts and Controls

Slot

For more information, refer to the pages indicated in parentheses.

Main unit

Top and front panel

2 3

1 8 79

A "/1 (on/standby)

Turns on the main unit, or sets it to standby mode.

B Disc lid (page 31) C Top panel display

D (N-Mark) (page 36)

Position the NFC-compatible device near this indication to activate the NFC function.

E LED indicator

White: Lights up when the main unit is turned on. Blue (for BLUETOOTH status): – System is ready for pairing:

Flashes quickly – During pairing: Flashes quickly – NFC device is detected: Flashes – Connection is established: Lights

F Soft-touch buttons/indicators

Stereo sound is received (Radio only)

Repeat play

Muting is on

The HDMI (OUT) jack is correctly connected to an HDCP* compliant equipment with HDMI input

The system’s status (radio frequency, etc.)**

BLUETOOTH power is on

N* (play) x* (stop) ./> (previous/next)

VOL +/– FUNCTION (page 28)

Selects the playback source.

*Touch and hold N on the main unit

for more than 2 seconds, the built-in sound demonstration will be played back on the system. If a USB device is connected, the audio contents from the USB device will be played back as sound demonstration. Touch x to stop the demonstration.

Note

During the demonstration, the volume level may be higher than the volume level you have set.

G (USB) port (page 33)

Place your fingernail in the slot to open the cover.

Indicators in the top panel display

H (remote control sensor) I Z (open/close)

About soft-touch buttons/ indicators

The soft-touch button indicators flash each time you turn on the main unit, wait until the indicators stop flashing. The buttons only function when the indicators are lit.

Note

• These buttons work when you touch them lightly. Do not press on them with excessive force.

• If the button does not work, release the button and wait for a few seconds. Then, touch the button again with your finger covering the button indicator.

* High-bandwidth Digital Content Protection ** When you press DISPLAY, the stream information/decoding status is displayed when

the function is set to “TV”. The stream information/decoding status may not appear depending on the stream or item being decoded.

Rear panel

1 542

9 8 67

312 54

Front panel

Rear panel

A SPEAKER ILLUMINATION terminals

B TV (DIGITAL IN OPTICAL) jack

C A.CAL MIC jack (BDV-N9200W/

Surround amplifier

A "/1 (on/standby) B LINK/STANDBY indicator

C SPEAKERS jacks

(BDV-N9200WL/BDV-N7200WL only) (page 21)

(pages 22, 23)

BDV-N9200WL/BDV-N7200W/ BDV-N7200WL only) (pages 28,

47)

(page 27)

You can check the status of wireless transmission between the main unit and surround amplifier.

D AUDIO IN (L/R) jacks (pages 22, 23) E ANTENNA (FM COAXIAL 75 ) jack

(page 25)

F HDMI (OUT) jack (page 22) G HDMI (IN 1/IN 2) jacks (page 23) H LAN (100) terminal (page 25) I SPEAKERS jacks (page 21)

D SPEAKER ILLUMINATION terminals

(BDV-N9200WL/BDV-N7200WL only) (page 21)

E SECURE LINK button (page 53)

Starts the Secure Link function.

Remote control

BDV-N9200WL/ BDV-N7200WL

BDV-N9200W/ BDV-N7200W/ BDV-N5200W

1 2

• AUDIO, N, and 2 + buttons have a

tactile dot. Use the tactile dot as a reference when operating the remote control.

• : For TV operations (For details, see “Preparing the remote control for controlling your TV” (page 19).)

A Z (open/close)

Opens or closes the disc lid.

SPEAKERS TVyAUDIO

Selects whether TV sound is output from the system’s speakers or the TV’s speaker(s). This function works only when you set [Control for HDMI] to [On] (page 60).

TV "/1 (on/standby) (page 19)

Turns on the TV or sets it to standby mode.

"/1 (on/standby) (page 28)

Turns on the system or sets it to standby mode.

B SPEAKER ILLUMINATION

(page 50)

Selects the illumination pattern on the speakers.

COLOUR PATTERN (page 50) VISUALIZER (page 50)

Selects the visualization pattern.

DIMMER (page 49)

Adjusts the brightness of the top panel display, soft-touch buttons indicators, LED indicator, and the illumination* on the speakers.

* BDV-N9200WL/BDV-N7200WL only

C Sound field buttons

See “Step 7: Enjoying Surround Sound” (page 29).

CLEARAUDIO+, SOUND FIELD, MUSIC EQ, GAME, NIGHT, CONCERT HALL, FOOTBALL, CINEMA STUDIO, MUSIC ARENA

D Color buttons

Shortcut keys for selecting items on some BD menus (can also be used for Java interactive operations on BDs).

E TOP MENU

Opens or closes the BD’s or DVD’s Top Menu.

POP UP/MENU

Opens or closes the BD-ROM’s Pop-up Menu, or the DVD’s menu.

OPTIONS (pages 30, 41, 52)

Displays the options menu on the TV screen or in the top panel display. (The location differs depending on the selected function.)

RETURN

Returns to the previous display.

B/V/v/b

Moves the highlight to a displayed item.

Tip

V/v are shortcut keys for track search during music CD playback.

(enter)

Enters the selected item.

F MIRRORING (pages 35, 38)

Selects the “SCR M” function.

BLUETOOTH (page 34)

Selects the “BT” function.

HOME (pages 28, 47, 55)

Enters or exits the system’s home menu.

SEN

Accesses the “Sony Entertainment Network™” online service.

FUNCTION (page 28)

Selects the playback source. By setting [Input Skip Setting] (page 62), you can skip unused inputs when selecting a function.

G DISPLAY (pages 32, 39, 45, 52)

Displays playback and web browsing information on the TV screen. Displays the preset radio station, frequency, etc., in the top panel display.

SLEEP (page 49)

Sets the sleep timer.

AUDIO (page 43)

Selects the audio format/track.

SUBTITLE

Selects the subtitle language when multilingual subtitles are recorded on a BD-ROM/DVD VIDEO.

Converts 2D content into simulated 3D content when connected to a 3D-compatible device.

H Playback operation buttons

See “Playback” (page 31).

m/M (fast/slow/freeze frame)

Fast reverse/fast forward during playback. Each time you press the button, the search speed changes.

Activates slow-motion play when pressed for more than one second in pause mode.

Plays one frame at a time when pressed in pause mode.

Note

During Blu-ray 3D Disc playback, slowmotion reverse play and single-frame reverse play are not available.

./> (previous/next)

Selects the previous/next chapter, track, or file.

N (play)

Starts or re-starts playback (resume play). Activates One-Touch Play (page 45) when the system is on and set to the “BD/DVD” function.

X (pause)

Pauses or re-starts playback.

x (stop)

Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder. Stops the built-in or USB sound demonstration.

Radio operation buttons

See “Tuner” (page 44).

TUNING +/– PRESET +/–

I (muting)

Turns off the sound temporarily.

2 (volume) +/–

Adjusts the volume.

TV 2 (volume) +/–

Adjusts the TV volume.

TV t (input)

Switches the TV’s input source between the TV and other input sources.

Preparing the remote control for controlling your TV

By adjusting the remote control signal, you can control your TV with the supplied remote control.

Note

When you replace the batteries of the remote control, the code number may reset to the default (SONY) setting. Set the remote control again.

1 Hold down TV ?/1. 2 Press the corresponding button for

your TV (see table below), then press

Manufacturer Button

SONY (default) CLEARAUDIO+

LG MUSIC EQ

PANASONIC GAME

PHILIPS NIGHT,

SAMSUNG SOUND FIELD,

SHARP CONCERT HALL

TOSHIBA FOOTBALL

CINEMA STUDIO, MUSIC ARENA

MUSIC EQ, MUSIC ARENA

Note

The TV’s manufacturer’s codes are registered to the buttons in the table above. If the setting is unsuccessful, the currently registered code is not changed. Press the corresponding button again. If more than one button is listed, try pressing them one at a time until you find the button that works with your TV.

3 Release TV ?/1.

Now you can use the TV ?/1, TV 2 +/– and TV t buttons to control your TV.

Getting Started

AGC B

DA G C B E

Step 1: Installing the Speakers

Install the speakers by referring to the illustration below. To assemble the speakers, refer to the supplied “Speaker Installation Guide”.

A Front left speaker (L) B Front right speaker (R) C Center speaker D Surround left speaker (L) E Surround right speaker (R) F Subwoofer G TV

Installing the surround speakers in rear position (Speaker layout: [Standard])

Installing all speakers in front position (Speaker layout: [All Front])

Note

• Be sure to select the speakers layout setting (page 47) according to your speakers placement.

• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

• Do not lean or hang on a speaker, as it may fall down.

• The speakers of this system are not magnetically shielded. This may result in color irregularity when they are placed near a CRT TV or projector.

Tip

• In order to output more effective sound when [All Front] setting is selected, we recommend you to install your front speakers and surround speakers closer to each other.

•You can install the speakers on a wall. For details, refer to the supplied “Speaker Installation Guide”.

Step 2: Connecting the System

Do not connect the AC power cord (mains lead) of the main unit to a wall outlet (mains) until all the other connections are made.

Note

When you connect other equipment with a volume control, turn down the volume of the equipment to a level where sound is not distorted.

Getting Started

Connecting the speakers

Purple (Subwoofer)

White (Front left speaker (L))

Green (Center speaker)

Red (Front right speaker (R))

Gray (Surround right speaker (R))

Blue (Surround left speaker (L))

Front left speaker (L)

Front right speaker (R)

Surround right speaker (R)

Surround left speaker (L)

Connect the speaker cords to match the color of the SPEAKERS jacks of the main unit and surround amplifier. Be sure to insert the speaker connector until it clicks.

To the main unit

To connect the SPEAKER ILLUMINATION terminal (BDV-N9200WL/ BDV-N7200WL only)

Connect the speaker illumination connector (attached with the speaker cord) to the main unit and surround amplifier so you can enjoy the lighting effect on your speakers. You can select the illumination pattern you want by pressing SPEAKER ILLUMINATION repeatedly (page 50).

To the main unit

To the surround amplifier

Getting Started

Connecting the TV

HDMI cable1) (supplied with Africa, India,

Middle East, Singapore, China, Thailand,

and Taiwan models only)

Optical digital cord

(not supplied)

OPTICAL

DIGITAL OUT

Audio cable (not supplied)

Select one of the following connection methods according to the input jacks on your TV.

Video connection

High Speed HDMI cable

The Audio Return Channel (ARC) function enables the TV to output sound through the system with an HDMI connection, without performing the B or C connection below. To set the ARC function on this system, see [Audio Return Channel] (page 61). To check the compatibility of your TV’s ARC function, refer to the operating instructions supplied with your TV.

Audio connections

If your TV’s HDMI jack is not compatible with the ARC function, make an appropriate audio connection (B or C) for listening to TV sound via the system’s speakers.

B High quality

AUDIO

OUTPUT

Standard quality

Getting Started

Note

System

Signal flow

: Audio signal

: Video signal

Equipment (Set-top box, VCR, PlayStation®, or digital satellite receiver, etc.)

Video out*

B, C

To enjoy TV sound, select “TV” function for connection B or “AUDIO” function for connection C.

Connecting the other equipment

Connect the system, TV and other equipment as follows. You cannot enjoy the audio and video of the connected equipment on the TV through this system when the system is off or in standby mode.

* This connection is unnecessary for connection A (HDMI connection).

Select one of the following connection methods according to the jack type of the equipment.

ACBA

Getting Started

A High quality

HDMI cable*

(not supplied)

High Speed HDMI cable

AUDI O

OUTPUT

Optical digital cord

(not supplied)

Audio cable (not supplied)

HDMI OUT

DIGITAL OUT

OPTICAL

Standard quality

When you make connection A

This connection can transmit both video and audio signals.

Note

• Video signals from the HDMI (IN 1/2) jacks are output to the HDMI (OUT) jack only when the “HDMI1” or “HDMI2” function is selected.

• To output an audio signal from the HDMI (IN 1/2) jacks to the HDMI (OUT) jack, you may need to change the audio output setting. For details, see [Audio Output] in [Audio Settings] (page 58).

• You can change the audio input of an equipment that is connected to the HDMI (IN 1) jack to the TV (DIGITAL IN OPTICAL) jack. For details, see [HDMI1 Audio Input mode] in [HDMI Settings] (page 61). (Europe models only.)

When you make connection B, C

Connect the system so that video signals from the system and other equipment are output to the TV, and audio signals from the equipment are output to the system.

Note

• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 60).

• You can enjoy equipment sound by selecting “TV” function for connection B or “AUDIO” function for connection C.

Getting Started

Connecting the antenna

FM wire antenna (aerial) (supplied)

Broadband router

LAN cable (not supplied)

(aerial)

Rear of the main unit

Note

• Be sure to fully extend the FM wire antenna (aerial).

• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Tip

If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the main unit to an outdoor FM antenna (aerial).

Step 3: Preparing for Network Connection

Tip

To connect the system to your network, perform [Easy Network Settings]. For details, see “Step 5: Performing the Easy Setup” (page 27).

Select the method based on your LAN (Local Area Network) environment.

• If you use a wireless LAN The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings.

• If you use a wired LAN Use a LAN cable to connect to the LAN (100) terminal on the main unit.

Tip

We recommend that you use a shielded and straight interface cable (LAN cable).

Getting Started

Before performing the network settings

When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button. If not, check the following information in advance, and record it in the space provided below.

• The network name (SSID*) that identifies your network.**

• If security is set on your wireless network, the security key (WEP key, WPA key).**

* SSID (Service Set Identifier) is a name

that identifies a particular wireless network.

** You need to check the settings of your

wireless LAN router to get the information about SSID and security key. For details: – visit the following website:

For customers in Europe and Russia: http://support.sony-europe.com/

For customers in other countries/ regions: http://www.sony-asia.com/section/ support

– refer to the operating instructions

supplied with the wireless LAN router

– consult the manufacturer of the

wireless LAN router

About wireless LAN security

Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this system supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment.

x No Security

Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data.

x WEP

WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices which do not support TKIP/AES to be connected.

x WPA-PSK (TKIP), WPA2-PSK

(TKIP)

TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP.

x WPA-PSK (AES), WPA2-PSK (AES)

AES is a security technology that uses an advanced security method distinct from WEP and TKIP. AES assures a higher security level than WEP or TKIP.

Step 4: Setting up the Wireless System

The main unit transmits sound to the surround amplifier that is connected to the surround speakers. To activate wireless transmission, perform the following Steps.

1 Connect the AC power cord (mains

lead) of the main unit.

Before connecting the AC power cord, make sure all connections in “Step 2: Connecting the System” (page 20) are secure.

+ 58 hidden pages