Sony BDV-E985W, BDV-E980W, BDV-E780W Quick setup guide

Quick Setup Guide/快速設定指南
FRONT R
FRONT L
SUBWOOFER
CENTER
SPEAKERS
Y
P
VIDEO OUT
SUR L
IMPEDANCE USE 3-16
SUR R
SPEAKERS
EZW-RT50
HDMI IN
DIGITAL OUT
OPTICAL
VIDEO OUT
AUDIO IN
L
R
AUDIO
SAT/
CABLE
COAXIAL
DIGITAL IN
ARC
OUT
IN 1 IN 2
OPTICAL
DIGITAL IN
TV
VIDEO OUT
OPTICAL
DIGITAL IN
TV
AUDIO IN
L
R
AUDIO
SAT/
CABLE
COAXIAL
DIGITAL IN
HDMI OUT
ARC
OUT
IN 1 IN 2
BDV-E985W/E980W/E780W
©2011 Sony Corporation Printed in Malaysia
(1)
For details, refer to the Operating Instructions.
詳細資訊,請參閱使用說明書。
Connect the speakers
1
For BDV-E985W/E980W, speaker assembly is necessary. Refer to the supplied “Speaker Installation Guide.”
對於 BDV-E985W/E980W,需要組裝揚聲器。請參閱提供的“揚聲器安裝指南”。
To connect speaker cords to the speaker/將揚聲器導線連接到揚聲器
Connect the cord so that the cord’s color tube matches the color of the label on the rear of the speaker.
連接導線,使揚聲器背面標籤的顏色對應導線色環。
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
將揚聲器導線連接到本機上對應顏色的SPEAKERS插孔。
連接揚聲器
Rear panel of the main unit/主機後面板
Rear or bottom of the speaker
揚聲器的背面或底部
Rear panel of the surround amplifier
環繞放大器後面板
Connect with HDMI cables (recommended)
2-A
For connecting with video cords instead of HDMI cables, see “2-B Connect with video cords” on the reverse side.
如果用視頻線代替 HDMI 電纜連接,請參閱反面的“2-B 用視頻線連接”。
Connecting your TV/連接電視機
TV
電視機
Rear of the main unit
主機背面
用HDMI電纜連接(建議)
HDMI cable
HDMI 電纜
*1
*1
Digital optical cord
*2
Make this connection to enjoy TV sound via the system. This connection is unnecessary if your TV is compatible with
the Audio Return Channel (ARC) function.
數位光纖導線
*2
進行此連接以透過系統欣賞電視聲音。 如果電視機與 Audio Return Channel (ARC) 功能相容,
則無需此連接。
Red
紅色
White
白色
SUBWOOFER
FRONT L
BDV-E780W is the model used for illustration purposes.
BDV-E780W 是用於圖示說明的機型。
Green
綠色
Purple
紫色
Blue
藍色
Gray
灰色
Connecting your set-top box/連接到機上盒
If you do not use a set-top box, skip to “3 Perform “Easy Setup”” on the reverse side. To enjoy sound from your set-top box, press FUNCTION repeatedly to select “HDMI 1.”
如果不使用機上盒,請跳至反面的“3 執行‘簡易設置’”。 若要欣賞來自機上盒的聲音,請反覆按 FUNCTION 選擇“HDMI 1”。
Set-top box
CENTER
Main unit
主機
FRONT R
機上盒
HDMI cable
HDMI 電纜
*2
*2
SUR R
Rear of the main unit
主機背面
SUR L
Surround amplifier
環繞放大器
*1 A High Speed HDMI cable is supplied with Singapore and Taiwan models only.
*
Continue to “3 Perform “Easy Setup””/
1 僅新加坡和台灣機型提供高速 HDMI 電纜。
*2 Not supplied./*2 不提供。
繼續進行“3 執行‘簡易設置’”
Connect with video cords
VIDEO IN
ARC
OUT
IN 1 IN 2
AUDIO IN
L
R
AUDIO
SAT/
CABLE
COAXIAL
DIGITAL IN
DIGITAL OUT
OPTICAL
OPTICAL
DIGITAL IN
TV
VIDEO OUT
DIGITAL OUT
COAXIAL
VIDEO OUT
ARC
OUT
IN 1 IN 2
OPTICAL
DIGITAL IN
TV
AUDIO IN
L
R
AUDIO
VIDEO OUT VIDEO IN
COAXIAL
DIGITAL IN
SAT/
CABLE
2-B
If you completed “2-A Connect with HDMI cables (recommended),” skip to “3 Perform “Easy Setup.””
如果完成“2-A 用 HDMI 電纜連接(建議)”,請跳至“3 執行‘簡易設置’”。
Connecting your TV/連接電視機
TV
電視機
用視頻線連接
Perform “Easy Setup”
3
執行“簡易設置”
Do not insert a disc before performing the “Easy Setup”.
執行“簡易設置”前,切勿插入光碟。
1. Insert batteries into the remote.
將電池裝入遙控器。
4. Switch the input selector on your TV so that system screens like the ones below appear on the TV screen.
切換電視機上的輸入選擇器,類似以下
畫面的系統螢幕會出現在電視機螢幕 上。
Starting up
啓動
“Easy Setup” screen
“簡易設置”畫面
Video cord
視頻線
Rear of the main unit
主機背面
*1
*1
Digital optical cord Make this connection to enjoy TV sound via the system.
數位光纖導線 進行此連接以透過系統欣賞電視聲音。
Connecting your set-top box/連接到機上盒
If you do not use a set-top box, skip to “3 Perform “Easy Setup.”” To enjoy sound from your set-top box, press FUNCTION repeatedly to select “SAT/CABLE.”
如果不使用機上盒,請跳至“3 執行‘簡易設置’”。 若要欣賞來自機上盒的聲音,請反覆按 FUNCTION 選擇“SAT/CABLE”。
Set-top box
機上盒
*2
*2
2. Insert the wireless transceivers into both the main unit and surround amplifier.
Firmly insert the wireless transceiver all the way into the slot, as in the figure below.
5. Perform basic settings by following the on-screen instructions in “Easy Setup” using /// and .
使用
///
,依照“簡易設置”
中的畫面指示,執行基本設定。
將無線收發器插入主機與環繞放大器。
,
TV
電視機
如下圖所示,將無線收發器牢牢完全插入插槽。
///
[Easy Setup is now complete.] appears when “Easy Setup” is complete.
“簡易設置”完成時,會出現 [ 現在簡易設置已
經完成。]。
Rear of the main unit
主機背面
*2
*2
Video cord
視頻線
Digital coaxial cord Make this connection to enjoy set-top box sound via the system.
數位同軸導線 進行此連接以透過系統欣賞機上盒聲音。
*2
*2
*1 Supplied with Taiwan models only./*1 僅台灣機型提供。
*2 Not supplied./*2 不提供。
3. Connect the AC power cords of the main unit, surround amplifier, and your TV to the AC power outlet, and then turn on the power of the main unit and your TV.
將主機、環繞放大器與電視機的交流電
源線連接至交流電源插座,然後打開主 機與電視機的電源。
Basic setup is complete. Refer to the supplied Operating Instructions for details on how to enjoy disc playback and many other features.
基本設置完成。有關如何欣賞光碟播放和許 多其他功能的詳情,請參閱提供的使用說明 書。
Loading...