SONY ALPHA 7R II User Manual [nl]

4-576-983-41(1)

ILCE-7RM2

E-mount

Interchangeable Lens Digital Camera/Instruction Manual GB

Appareil photo à objectif interchangeable/Mode d’emploi FR

Digitalkamera mit Wechselobjektiv/Gebrauchsanleitung DE

Cámara Digital de Lentes Intercambiables/Manual de instrucciones ES

Fotocamera digitale con obiettivo intercambiabile/Istruzioni per l’uso IT

Câmara Digital de Objetivas intercambiáveis/Manual de instruções PT

Digitale camera met verwisselbare lens/Gebruiksaanwijzing NL

Цифровой фотоаппарат со сменным объективом/Инструкция по эксплуатации

Цифровий фотоапарат зі змінним об'єктивом/Посібник з експлуатації

Digitalkamera med utbytbart objektiv/Handledning SE

Digitaalinen kamera vaihdettavalla objektiivilla/Käyttöopas FI

Digitalkamera med utskiftbart objektiv/Bruksanvisning NO

Digitalkamera med udskifteligt objektiv/Betjeningsvejledning DK

“Help Guide” (Web manual)

Refer to “Help Guide” for in-depth instructions on the many functions of the camera.

« Manuel d’aide » (Manuel en ligne)

Consultez le « Manuel d’aide » pour obtenir des instructions détaillées au sujet des nombreuses fonctions de l'appareil.

http://rd1.sony.net/help/ilc/1520/h_zz/

English

E-mount

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. You can read the “Help Guide” on your computer or smartphone. Refer to it for in-depth instructions on the many functions of the camera.

URL:

http://rd1.sony.net/help/ilc/1520/ h_zz/

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. WW325951 (ILCE-7RM2) Serial No. Model No. AC-UD10/AC-UUD11 Serial No.

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus.

The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

For supplied accessories

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

Battery charger

Use the nearby wall outlet (wall socket) when using the Charger. Disconnect the Charger from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669). The number below is for the FCC related matters only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: WW325951 Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

For Customers in Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

For Customers in Europe

Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems)

certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these products and batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at endof-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

For Customers in Singapore

For customers who purchased their camera from a store in Japan that caters to tourists

Note

Some certification marks for standards supported by the camera can be confirmed on the screen of the camera. Select MENU t (Setup) t [Certification Logo]. If display is not possible due to problems such as camera failure, contact your Sony dealer or local authorized Sony service facility.

For Customers in U.A.E.

For Customers in Malaysia

For details on the Wi-Fi and NFC One-touch functions, refer to the attached document “Wi-Fi Connection/One-touch (NFC) Guide” or to the “Help Guide.”

Introduction of functions

This section introduces some frequently used shooting functions and other unique functions. See the pages in parentheses for details.

Shooting functions used frequently

Exposure Comp. (34)

You can adjust the exposure to change the brightness of the entire image. Even when the shooting mode is set to M, you can adjust the exposure if the ISO sensitivity is set to [ISO AUTO].

ISO/Multi Frame NR (34)

You can adjust the luminous sensitivity. The ISO sensitivity can be adjusted between ISO 50 and ISO 102400.

White Balance (34)

You can adjust the color tones. You can select an option to suit a light source, or perform fine adjustments using color temperature and color filters.

Drive Mode (33)

You can select an appropriate drive mode to suit your purposes, such as single shooting, continuous shooting, or bracket shooting.

Focus Mode (78)/Focus Area (78)/Focus Settings (34)

You can adjust various settings for the focus. You can select the focusing method or focusing area as desired to match your subject.

Focus Magnifier (35)/MF Assist (36)

Enlarge the image to make checking the focus easier when focusing manually.

Introduction of functions

Features of this camera

Shooting still images in 42 megapixels (74)

You can shoot still images with extremely high resolution.

Electronic front curtain shutter (38)

You can shoot with a shorter release time lag.

5-axis in-body image stabilization (61)

Reduce blurring caused by vertical shift and horizontal shift, pitch and yaw, and roll.

4K movie recording (75)

You can record high-detailed movies in 4K resolution (3840×2160).

Fast and accurate auto focus (78)

Enables faster and more accurate auto focus combining contrast AF and phase detection AF that detects 399 points.

Silent Shooting (79)

You can shoot images without the shutter producing a sound.

How to operate or customize the camera

Display information (37)

When you look into the viewfinder, the viewfinder mode is activated, and when you move your face away from the viewfinder, the viewing mode reverts to monitor mode (default settings). You can change the screen display mode by pressing DISP on the control wheel.

Quick Navi (26)

In [For viewfinder] screen, you can quickly switch from the monitor to the Quick Navi screen by pressing the Fn button. You can set the items with an intuitive operation by using the front/rear dial and the control wheel.

Introduction of functions

Customization (40)

The camera are equipped with the Custom buttons, where you can assign desired function on each button. You can also assign functions to other buttons, such as the AEL button.

Before use

Notes on using your camera

Screen language

You can select the language displayed on the screen using the menu (page 43).

Shooting procedure

This camera has 2 modes for monitoring subjects: the monitor mode using the monitor, and the viewfinder mode using the viewfinder.

Functions built into this camera

• This camera is compatible with 1080 60p

or 50p-format movies. Unlike standard recording modes up to now, which record in an interlacing method, this camera records using a progressive method. This increases the resolution, and provides a smoother, more realistic image.

• This camera is compatible with 4K 30p/

4K 25p/4K 24p recording. Movies can be recorded in a higher resolution.

Creating an image database file

If you insert a memory card that does not contain an image database file into the camera and turn on the power, the camera automatically creates an image database file using some of the memory card’s capacity. The process may take a long time and you cannot operate the camera until the process is completed. If a database file error occurs, export all images to your computer using PlayMemories Home™, and then format the memory card using the camera.

Notes on recording/playback

• In order to stabilize the operation of the memory card, it is recommended that you format the memory card on the camera when you use it with that camera for the first time. Once you format the memory card, all the data recorded on the memory card will be deleted and cannot be restored. Before formatting, copy the data to a computer or other device.

• If you repeatedly record and delete images over a long period, the files on the memory card may become fragmented and movie recording may be suspended partway through. If this occurs, copy the data to a computer or other device and then perform [Format].

• Before you start recording, make a trial recording to make sure that the camera is working correctly.

•

This camera is designed to be dust and moisture-resistant, but is not waterproof or splash-proof.

Back up recommendation for a memory card

If you turn the camera off, remove the battery pack or the memory card, or disconnect the USB cable while the access lamp is flashing, the data on the memory card may become damaged. To avoid data loss, always copy (back up) data to another device.

No compensation for damaged

content or recording failure

Sony can provide no guarantees in the event of failure to record or loss or damage of recorded images or audio data due to a malfunction of the camera or recording media, etc. We recommend backing up important data.

Shooting with an E-mount lens compatible APS-C size

This camera is equipped with a 35 mm, full-frame CMOS image sensor. However, the image size is automatically set to that of the APS-C size setting and the image size is smaller when an E-mount lens compatible APS-C size is used (default settings).

Notes on the monitor, electronic viewfinder, lens, and image sensor

• The monitor and electronic viewfinder are manufactured using extremely highprecision technology, and over 99.99% of the pixels are operational for effective use. However, there may be some small black dots and/or bright dots (white, red, blue or green in color) that constantly appear on the monitor and electronic viewfinder. These dots are normal due to the manufacturing process and do not affect the images in any way.

• Do not hold the camera by the monitor.

• When using the power zoom lens, be careful not to get your fingers or any other objects caught in the lens.

• Do not expose the camera to a strong light source such as a sunlight. The internal components may become damaged.

• Do not look at sunlight or a strong light source through the lens when it is detached. This may result in unrecoverable damage to the eyes or cause a malfunction.

Notes on using your camera

• Do not use the camera in areas where strong radio waves or radiation are being emitted. Recording and playback may not function correctly.

• Images may trail across on the screen in a cold location. This is not a malfunction. When turning on the camera in a cold location, the screen may become temporarily dark. When the camera warms up, the screen will function normally.

• The recorded image may be different from the image you monitored before recording.

Notes on using the lenses and accessories

It is recommended that you use Sony lenses/accessories designed to suit the characteristics of this camera. Using this camera with products from other manufacturers may affect its performance, leading to accidents or malfunction. Sony bears no responsibility for such accidents or malfunction.

Notes on the multi interface shoe

• When attaching or detaching accessories such as an external flash to the multi interface shoe, first turn the power to OFF. When attaching the accessories, tighten the screws all the way and confirm that it is firmly fastened to the camera.

• Do not use an external flash with a high voltage flash sync terminal or inverse polarity. This may result in malfunction.

Notes on shooting with the

viewfinder

This camera is equipped with an Organic Electro-Luminescence viewfinder with high resolution and high contrast. This viewfinder achieves a wide viewing angle and a long eye relief. This camera is designed to provide an easily viewable viewfinder by appropriately balancing various elements.

• The image may be slightly distorted near the corners of the viewfinder. This is not a malfunction. When you want to see the full composition with all its details, you can also use the monitor.

• If you pan the camera while looking into the viewfinder or move your eyes around, the image in the viewfinder may be distorted or the color of the image may change. This is a characteristic of the lens or display device and is not a malfunction. When you shoot an image, we recommend that you look at the center area of the viewfinder.

• When shooting with the viewfinder, you may experience symptoms such as eyestrain, fatigue, travel sickness, or nausea. We recommend that you take a break at regular intervals when you are shooting with the viewfinder. The required length or frequency of the break may differ depending on the individuals, so you are advised to decide at your own discretion. In case you may feel uncomfortable, refrain from using the viewfinder until your condition recovers, and consult your doctor as necessary.

Notes on using your camera

Notes on recording for long periods of time or recording 4K movies

• Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies.

• Under high ambient temperatures, the temperature of the camera rises quickly.

• When the temperature of the camera rises, the image quality may deteriorate. It is recommended that you wait until the temperature of the camera drops before continuing to shoot.

• The surface of the camera may get warm. This is not a malfunction.

• Especially during 4K movie shooting, the recording time may be shorter under low temperature conditions. Warm up the battery pack or replace it with a new battery.

Notes on importing XAVC S movies and AVCHD movies to a computer

When importing XAVC S movies or AVCHD movies to a computer, download and use the software PlayMemories Home from the following website: http://www.sony.net/pm/

Notes when playing movies on other

devices

• Movies recorded with this camera may not be played back correctly on other devices. Also, movies recorded with other devices may not be played back correctly on this camera.

• Discs created from AVCHD movies recorded by this camera can be played back only on AVCHD-compatible devices. DVD players or recorders cannot play back discs created from AVCHD movies, as they are incompatible with the AVCHD format. Also, DVD players or recorders may fail to eject HD discs recorded in AVCHD format.

• Movies recorded in 1080 60p/1080 50p format can be played back only on 1080 60p/1080 50p-supported devices.

• Movies recorded in XAVC S format can be played back only on XAVC Ssupported devices.

Warning on copyright

• Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

• To prevent [Copyright Info] from being used illegally, leave [Set Photographer] and [Set Copyright] blank when you lend or transfer the camera.

• Sony bears no responsibility for any trouble or damage caused by unauthorized use of [Copyright Info].

The pictures used in this manual

The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.

Notes on using your camera

On the data specifications described in this manual

The data on performance and specifications are defined under the following conditions, except as described in this manual: at an ordinary ambient temperature of 25ºC (77°F), and using a battery pack that has been fully charged until the charge lamp has turned off.

How to turn off wireless network functions (Wi-Fi and NFC, etc.) temporarily

When you board an airplane, etc., you can turn off all wireless network functions temporarily. Select MENU button t (Wireless) t [Airplane Mode] t [On]. If you set [Airplane Mode] to [On], an (airplane) mark will be displayed on the screen.

Notes on wireless LAN

If your camera is lost or stolen, Sony bears no responsibility for the loss or damage caused by illegal access or use of the registered access point on the camera.

Notes on security when using wireless LAN products

• Always make sure that you are using a secure wireless LAN to avoid hacking, access by malicious third parties, or other vulnerabilities.

• It is important that you set the security settings when using a wireless LAN.

• If a security problem arises because no security precautions are in place or due to any inevitable circumstances when using a wireless LAN, Sony bears no responsibility for the loss or damage.

Before use

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

•AC Adaptor (1)

The shape of the AC Adaptor may differ depending on the country/ region.

• Battery charger BC-VW1 (1)

• Power cord (mains lead) (1)* (not supplied in the U.S.A. and Canada)

* Multiple power cords may be supplied

with your camera. Use the appropriate one that matches your country/region.

• Rechargeable battery pack NPFW50 (2)

• Micro USB cable (1)

• Body cap (1) (Attached on the camera)

• Cable protector (1)

For how to attach the cable protector to the camera, refer to page 19.

• Shoe cap (1) (Attached on the camera)

• Eyepiece Cup (1) (Attached on the camera)

• Instruction Manual (1) (this manual)

• Wi-Fi Connection/One-touch (NFC) Guide (1)

This guide explains the functions that require a Wi-Fi connection.

• Shoulder strap (1)

For how to attach the shoulder strap to the camera, refer to page 19.

Identifying parts

See the pages in parentheses for details on operation for the parts.

Front side

When the lens is removed

A Power switch/Shutter button B Front dial C Remote sensor D Wi-Fi antenna (built-in) E Lens release button F Built-in microphone*

G AF illuminator (34)/Self-timer

lamp

H Mount index I Image sensor* J Mount K Contacts*

*1 Do not cover this part during movie

recording. Doing so may cause noise or lower the volume.

*2 Do not directly touch these parts.

Rear side

Identifying parts

A Eyepiece cup (64) B Viewfinder C MENU button (32) D Eye sensor E Monitor (21)

• You can adjust the monitor to an easily viewable angle and shoot from any position.

F Diopter-adjustment dial

• Adjust the diopter-adjustment dial according to your eyesight until the display appears clearly in the viewfinder.

G For shooting: C3 (Custom 3)

button (25) For viewing: (Enlarge) button (70)

H AF/MF/AEL switch lever I Rear dial

J For shooting: AF/MF (Auto

focus/manual focus) button/ AEL button (25) For viewing: (Image index) button (70)

K MOVIE button (67) L For shooting: Fn button (30)

For viewing: (Send to Smartphone) button

• You can display the screen for [Send to Smartphone] by pressing this button.

M Control wheel (28) N For shooting: C4 (Custom 4)

button (25) For viewing: (Delete) button (71)

O Access lamp P (Playback) button (68)

Identifying parts

Top side/Side view

Identifying parts

A Image sensor position

mark

B Speaker C m (Microphone) jack

• When an external microphone is connected, the microphone is turned on automatically. If the external microphone is a plugin-power type, the power of the microphone is supplied by the camera.

D i (Headphones) jack E Multi/Micro USB Terminal*

• Supports Micro USB compatible device.

F Charge lamp (48) G HDMI micro jack H Multi interface shoe*

• Some of the accessories may not be inserted fully and protrude backward from the Multi interface shoe. However, when the accessory reaches the front end of the shoe, the connection is completed.

I Mode dial (72) J C2 (Custom 2) button (25) K C1 (Custom 1) button (25) L Exposure compensation dial

(25)

M Hooks for shoulder strap

• Attach both ends of the strap onto the camera.

N (N mark)

• This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone. For details on the location of the

(N mark) on your Smartphone, refer to the operating instructions of the Smartphone.

Identifying parts

P Memory card slot

* For details on compatible accessories

for the multi interface shoe and the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility. You can also use accessories that are compatible with the accessory shoe. Operations with other manufactures’ accessories are not guaranteed.

Attaching the cable protector

Use the cable protector to prevent the HDMI cable from being disconnected when shooting images connected by the HDMI cable. jack covers and insert an HDMI cable into the camera. Attach the cable protector as illustrated so that the edge of the cable protector fits in the slit to the left of the m (microphone) jack. Secure the cable protector with the attachment screw. Then secure the HDMI cable with the fixing dial.

Fit the edge in the slit

Open both of the

• NFC (Near Field Communication) is an international standard of shortrange wireless communication technology.

O Memory card cover

Attachment screw

Fixing dial

Bottom view

Identifying parts

A Battery insertion slot (46) B Battery cover (46) C Tripod socket hole

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

D Battery cover locking button E Battery cover release lever

• When you attach a vertical grip (sold separately), remove the battery cover.

Connection plate cover

Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below.

• Make sure that the cord is not pinched when you close the cover.

List of icons on the monitor

The status of the monitor is set to [Display All Info.] in the default settings. When you change the [DISP Button] setting, and press DISP on the control wheel, the screen status will change to the viewfinder mode. You can also display the histogram by pressing DISP. The displayed contents and their position shown below are just a guideline, and may differ from the actual display.

Monitor mode For playback

Basic information display

Viewfinder mode

Auto Mode or Scene Selection mode

P/A/S/M/Sweep Panorama mode

Histogram display

Display Indication

Shooting mode (72)

P P* A S

List of icons on the monitor

Display Indication 120p 60p 60i

30p 24p 100p 50p 50i 25p

Frame rate of movies

Image size of movies (76)

NO CARD

100 Remaining number of

42M 36M 18M 15M 11M 8.9M

4.5M 3.8M

RAW RAW+J X.FINE FINE STD

Scene Recognition icons

Memory card (53)/ Upload (42)

recordable images

Aspect ratio of still

images (33) Image size of still

images (33)

Image quality of still images (33)

Remaining battery (50)

Remaining battery warning

USB power supply (51)

Flash charge in progress

APS-C/Super 35mm (39)

Setting Effect OFF (37)

AF Illuminator (34)

NFC is activated

Airplane Mode

No audio recording of movies (36)

Wind Noise Reduction (36)

SteadyShot off/on, Camera shake warning (61)

SteadyShot Focal Length/Camera shake warning (61)

Overheating warning

Database file full/

Database file error

Display Indication

Smart Zoom/Clear

100-0003 Folder - file number

- Protect (41)

XAVC S 4K XAVC S HD AVCHD MP4

DPOF DPOF set

Image Zoom/Digital Zoom

View Mode (69)

Recording mode of movies

Auto Object Framing

Dual Video REC (33)

PC Remote Silent Shooting (79) Bright Monitoring Write Copyright

Information (43)

List of icons on the monitor

Display Indication

±0.0 Flash compensation

Metering mode (34) 35mm Lens focal length AWB

7500K A5 G5

D-Range Optimizer/

Drive mode (33)

Flash mode (33)/Redeye reduction (34)

(34)

Focus mode (34)

AF area

Face Detection/Smile Shutter (35)

White balance (Auto, Preset, Underwater Auto, Custom, Color temperature, Color filter) (34)

Auto HDR (34)

List of icons on the monitor

Display Indication

Creative Style (35)/ Contrast, Saturation, Sharpness

+3 +3 +3

Picture Effect (35)

Smile detection sensitivity indicator

– Picture Profile (78)

Display Indication z Lock-on AFLock-on AF guide

Bracket indicator

Exposure compensation

STBY Movie recording

REC 0:12 Recording time of the

z Focus 1/250 Shutter speed F3.5 Aperture Value

(34)/Metered Manual

standby

movie (m:s)

Display Indication ISO400

ISO AUTO

AE lock/FEL lock

2015-1-1 10:37PM

3/7 File number/Number of

00:00:00:00 Time code

00 00 00 00 User bit (42)

ISO sensitivity (34)

Shutter speed indicator Aperture indicator Histogram Digital level gauge

Audio level (37)

D-Range Optimizer/ Auto HDR/Auto HDR image warning

Picture Effect error Date of recording

images in the view mode

REC Control

Spot metering area

(hour:minute:second: frame) (42)

Functions list

Functions that can be operated using the buttons/dials

You can set up or operate various functions using these buttons/dials. For the location of the buttons/dials, see “Identifying parts” (page 15).

Mode dial (72) Switches the shooting mode. MENU button (32) Displays the menu screen for setting menu items. MOVIE button (67) Records movies. AF/MF button/AEL button/

button

button (70) Scales an image up when viewing images.

Fn button (30)/ button Displays the setup screen for functions set using the Fn

Exposure compensation dial

button (68) Plays back images.

button (71) Deletes images.

Custom button Assigns a frequently-used function to the button.

Switches the autofocus and manual focus temporarily./ Fixes the exposure of the entire screen./Displays multiple images on the screen simultaneously.

button. In [For viewfinder] screen, switches to the Quick Navi screen./In playback mode, pressing button switches to “Send to Smartphone” screen.

Sets the range for exposure adjustment.

The following function is assigned to each button in the default settings. C1 (Custom 1) button: White Balance C2 (Custom 2) button: Focus Settings C3 (Custom 3) button: Focus Mode C4 (Custom 4) button: Not set

How to use the Quick Navi screen

Using the Quick Navi screen, you can change settings directly on the recording information display when the screen mode is set to [For viewfinder] (Quick Navi).

1 MENU button t (Custom Settings) t [DISP Button] t

[Monitor] t [For viewfinder] t [Enter]

2 Press the DISP on the control wheel to set the screen mode to

[For viewfinder].

3 Press the Fn button to switch to the Quick Navi screen.

In Auto Mode or Scene Selection mode

In P/A/S/M/Sweep Panorama mode

• The displayed contents and their position shown are just a guideline, and may differ from the actual display.

4 Select the desired item with v/V/b/B on the control wheel.

How to use the Quick Navi screen

5 Set the item with the front dial.

• Some setting values can be finely adjusted by turning the rear dial.

• Pressing the center of the control wheel turns on the designated screen used to set up the selected item (page 28).

• Pressing the Fn button again turns off the Quick Navi screen and the screen goes back to the original one.

Functions available on the Quick Navi screen

Drive Mode Flash Mode Flash Comp. Focus Mode Focus Area Exposure Comp. ISO Metering Mode White Balance DRO/Auto HDR Creative Style Picture Effect Picture Profile Smile/Face Detect. Image Size

Aspect Ratio Quality SteadyShot

Auto Mode Scene Selection Peaking Level

Notes

• Gray items on the Quick Navi screen are not available.

• When using [Creative Style] (page 35) or [Picture Profile] (page 35), some of the setup tasks can be accomplished only on a designated screen.

Operating the camera

How to use the control wheel

• You can turn the control wheel or press up/down/left/right on the control wheel to move the selection frame. Press z in the center of the control wheel to set the selected item. In this manual, the action of pressing the up/down/left/right side of the control wheel is indicated by v/V/b/B.

• The following functions are assigned to v/b/B on the control wheel.

v DISP Changes the screen display.

B ISO ISO sensitivity b / Drive Mode

• You can assign a desired function to the V/b/B/z buttons and to the control wheel turning position in shooting mode.

• When you turn the control wheel or press b/B on the control wheel in playback mode, you can display the previous or next image.

• Cont. Shooting/Bracket

• Self-timer

Operating the camera

How to use the front dial/rear dial

You can turn the front dial or rear dial to change the settings required for each shooting mode with immediate effect.

Selecting a function using the Fn (Function) button

This button is used for setting up or executing functions used frequently in shooting, except for functions from the Quick Navi screen.

1 Press the DISP on the control wheel to set the screen mode to

other than [For viewfinder].

2 Press the Fn button.

3 Select the desired item using v/V/b/B on the control wheel.

For a list of functions that can be registered and how to register them, see page 31.

4 Select the desired setting by

turning the front dial, then press z on the control wheel.

• Some setting values can be finely adjusted by turning the rear dial.

To set the individual settings in the dedicated screen

In step 3, select a setting item and press z on the control wheel to switch to the dedicated screen for the setting item. Set the items according to the Operation guide.

Operation guide

+ 757 hidden pages