Skil 4003, 4170 Instruction Manual

Download

JIG SAW 4003 (F0154003 . . ) 4170 (F0154170 . . )

SKIL Europe BV - Konijnenberg 60 04/08 2610394187 4825 BD Breda - The Netherlands

www.skileurope.com

ORIGINAL INSTRUCTIONS . . . . . . . . . . . . . 7

NOTICE ORIGINALE . . . . . . . . . . . . . . . . . . 9

ORIGINALBETRIEBSANLEITUNG . . . . . .

ORIGINELE GEBRUIKSAANWIJZING. . . . 15

BRUKSANVISNING I ORIGINAL . . . . . . . . 18

ORIGINAL BRUGSANVISNING . . . . . . . . . 21

ORIGINAL DRIFTSINSTRUKS. . . . . . . . . .

ALKUPERÄISET OHJEET . . . . . . . . . . . . . 26

MANUAL ORIGINAL . . . . . . . . . . . . . . . . . 29

MANUAL ORIGINAL. . . . . . . . . . . . . . . . . . 32

ISTRUZIONI ORIGINALI . . . . . . . . . . . . . . 35

EREDETI HASZNÁLATI UTASÍTÁS. . . . . . 37

PÒVODNÍM NÁVODEM K POUÎÍVÁNÍ . . . 40

OR‹J‹NAL ‹ﬁLETME TAL‹MATI . . . . . . . . . 43

INSTRUKCJÑ ORYGINALNÑ. . . . . . . . . . . 46

ОДЛИННИК РУКОВОДСТВА

ПО ЭКСПЛУАТАЦИИ . . . . . . . . . . . . . . . .

ОРИГІНАЛЬНА ІНСТРУКЦІЯ

З ЕКСПЛУАТАЦІЇ . . . . . . . . . . . . . . . . . . .

ΠΡΩΤΟΤΥΠΟ Ο∆ΗΓΙΩΝ ΧΡΗΣΗΣ . . . . . . 55

INSTRUCØIUNI DE FOLOSIRE

ORIGINALE . . . . . . . . . . . . . . . . . . . . . . . .

ОРИГИНАЛНО РЪКОВОДСТВО

ЗА ЕКСПЛОАТАЦИЯ . . . . . . . . . . . . . . . .

PÔVODN¯ NÁVOD NA POUÎITIE. . . . . . . 65

ORIGINALNE UPUTE ZA RAD . . . . . . . . . 68

ORIGINALNO UPUTSTVO ZA RAD. . . . . . 70

IZVIRNA NAVODILA. . . . . . . . . . . . . . . . . . 73

ALGUPÄRANE KASUTUSJUHEND. . . . . . 75

ORI˛INÅLÅ LIETO·ANAS PAMÅC±BA . . . 78

ORIGINALI INSTRUKCIJA . . . . . . . . . . . . . 81

FIN

SRB

SLO

EST

ME77

4003

55mm10 mm

4 mm

4170

10 mm

4 mm

380

Watt

400

Watt

1,6 kg

EPTA 01/2003

1,7 kg

EPTA 01/2003

3000

p/min

0-3000

p/min

(4170)

3 4

2610388128

2610388130

2610388134

4170

# $

2610388138

2610388134

2610388130

2610388124

2610388132

2610388128

2610388126

2610388122

ACCESSORIES SKIL nr.

Jig saw 4003/4170 INTRODUCTION

• This tool is intended for making cut-throughs and cutouts in wood, plastic, metal, ceramic plates and rubber, and is suitable for straight and curved cuts with mitre angles to 45°

• Read and save this instruction manual 3

TECHNICAL SPECIFICATIONS 1 TOOL ELEMENTS 2

A Switch for on/off B Button for switch locking C Wheel for adjusting sawing speed (4170) D Ventilation slots

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use an earth leakage circuit breaker. Use of an earth leakage circuit breaker reduces the risk of electric shock.

3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source, picking up or carrying the tool. Carrying

power tools with your ﬁ nger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before

making any adjustments, changing accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations

different from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR JIG SAWS

• Always keep the cord away from moving parts of the tool; direct the cord to the rear, away from the tool

• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the plug

• Never use the tool when cord is damaged; have it replaced by a qualiﬁ ed person

• Do not work materials containing asbestos (asbestos is considered carcinogenic)

• Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work

with a dust extraction device when connectable

• Certain kinds of dust are classiﬁ ed as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when connectable

• Follow the dust-related national requirements for the materials you want to work with

• Do not use a saw blade which is cracked, deformed or dull

• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand)

• Keep hands away from the saw blade while the tool is in use

• Remove all obstacles on top of as well as underneath the cutting path before you start cutting

• Always disconnect plug from power source before making any adjustment or changing any accessory

• Wear protective goggles when working with materials which produce chips

• Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them before you start working

• Check the functioning of the tool before each use and, in case of a defect, have it repaired immediately by a qualiﬁ ed person; never open the tool yourself

• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply)

• When used outdoors, connect the tool via a fault current (FI) circuit breaker with a triggering current of 30 mA maximum, and only use an extension cord which is intended for outdoor use and equipped with a splashproof coupling-socket

• The noise level when working can exceed 85 dB(A); wear ear protection

• When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill

• SKIL can assure ﬂ awless functioning of the tool only when original accessories are used

• Use completely unrolled and safe extension cords with a capacity of 16 Amps (U.K. 13 Amps)

• In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug

• This tool should not be used by people under the age of 16 years

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended

USE

• On/off 4

• Switch locking for continuous use 5

• Changing saw blades 6

! insert blade to full depth with teeth facing

forward 7

• Sawing at 15°/30°/45° 8

• Adjusting sawing speed to material used 9 (4170)

! if the tool does not run with wheel C in position 1,

select a higher sawing speed and lower the sawing speed while the tool runs

• Dust suction 0

! do not use vacuum cleaner when cutting metal

• Operating the tool

- before switching on the tool, ensure that front end of

footplate rests ﬂ at on the workpiece

- hold tool ﬁ rmly with both hands, so you will have full

control of the tool at all times

! while working, always hold the tool at the grey-

coloured grip area(s) !

- ensure that complete surface of footplate rests ﬁ rmly on the workpiece

! ensure that the blade has come to a complete

standstill, before you lift the tool from the workpiece

- keep ventilation slots D 2 uncovered

APPLICATION ADVICE

• Use the appropriate saw blades @

! use T-shank blades only

• When cutting metals, lubricate saw blade regularly with oil

• For an accurate straight cut, guide tool with footplate along the edge of a straight piece of wood #

• Pre-drill a hole before making cut-outs $

• Splinter-free cutting

- cover cutting-line with several layers of wide tape

before cutting

- always face the good side of the workpiece down

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual (indicated by an asterisk) has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the ventilation slots)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram of the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility

- symbol % will remind you of this when the need for

disposing occurs

Scie sauteuse 4003/4170 INTRODUCTION

• Cet outil est conçu pour effectuer des découpes et coupes dans le bois, les matières plastiques, le métal, les plaques en céramique et le caoutchouc, et est approprié pour des coupes droites et curvilignes avec des angles d’onglet jusqu’à 45°

• Lisez et conservez ce manuel d’instructions 3

SPECIFICATIONS TECHNIQUES 1 ELEMENTS DE L’OUTIL 2

A Interrupteur pour mise en marche/arrêt B Bouton de blocage de l’interrupteur C Molette de réglage de la vitesse de sciage (4170) D Fentes de ventilation

SECURITE

INSTRUCTIONS GENERALES DE SECURITE

ATTENTION! Lisez tous les avertissements de

sécurité et toutes les instructions. Ne pas suivre les

avertissements et instructions peut entraîner un choc électrique, un incendie et/ou de graves blessures sur les personnes. Conservez tous les avertissements et

toutes les instructions pour pouvoir s’y reporter ultérieurement. La notion d’”outil électroportatif” dans les

avertissements se rapporte à des outils électriques raccordés au secteur (avec câble de raccordement).

1) SECURITE DE LA ZONE DE TRAVAIL

a) Maintenez l’endroit de travail propre et bien éclairé.

Un lieu de travail en désordre ou mal éclairé augmente le risque d’accidents.

b) N’utilisez pas l’outil dans un environnement

présentant des risques d’explosion et où se trouvent des liquides, des gaz ou poussières inflammables.

Les outils électroportatifs génèrent des étincelles risquant d’enﬂ ammer les poussières ou les vapeurs.

CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60 745, EN 55 014, in accordance with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009 on). NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is 85 (4003)/87 (4170) dB(A) and the sound power level 96 (4003)/98 (4170) dB(A) (standard deviation: 3 dB), and the vibration ✱ m/s

(hand-arm method).

Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE DÉCLARATION DE CONFORMITÉ Nous déclarons sous notre propre responsabilité que ce produit est en conformité avec les

normes ou documents normalisés suivants: EN 60 745, EN 55 014, conforme aux réglementations 2006/95/CE, 2004/108/CE, 98/37/CE (jusqu’au 28.12.2009), 2006/42/CE (à partir du 29.12.2009). BRUIT/VIBRATION Mesuré selon EN 60 745 le niveau de la pression sonore de cet outil est 85 (4003)/87 (4170) dB(A) et le niveau de la puissance sonore 96 (4003)/98 (4170) dB(A) (déviation standard: 3 dB), et la vibration ✱ m/s

(méthode main-bras).

Dossier technique auprès de: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE KONFORMITÄTSERKLÄRUNG Wir erklären in alleiniger Verantwortung, daß dieses Produkt mit den folgenden Normen oder

normativen Dokumenten übereinstimmt: EN 60 745, EN 55 014, gemäß den Bestimmungen der Richtlinien 2006/95/EG, 2004/108/EG, 98/37/EG (bis 28.12.2009), 2006/42/EG (ab 29.12.2009). GERÄUSCH/VIBRATION Gemessen gemäß EN 60 745 beträgt der Schalldruckpegel dieses Gerätes 85 (4003)/87 (4170) dB(A) und der Schalleistungspegel 96 (4003)/98 (4170) dB(A) (Standard- abweichung: 3 dB), und die Vibration ✱ m/s

(Hand-Arm Methode).

Technische Unterlagen bei: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten:

EN 60 745, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 2006/95/EG, 2004/108/EG, 98/37/EG (tot 28-12-2009), 2006/42/EG (vanaf 29-12-2009). GELUID/VIBRATIE Gemeten volgens EN 60 745 bedraagt het geluidsdrukniveau van deze machine 85 (4003)/87 (4170) dB(A) en het geluidsvermogen-niveau 96 (4003)/98 (4170) dB(A) (standaard deviatie: 3 dB), en de vibratie ✱ m/s

(hand-arm methode).

Technisch dossier bij: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE KONFORMITETSFÖRKLARING Vi intygar och ansvarar för, att denna produkt överensstämmer med följande norm och

dokument: EN 60 745, EN 55 014, enl. bestämmelser och riktlinjema 2006/95/EG, 2004/108/EG, 98/37/EG (till 28.12.2009), 2006/42/EG (from 29.12.2009). LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt EN 60 745 är på denna maskin 85 (4003)/87 (4170) dB(A) och ljudeffektnivån 96 (4003)/98 (4170) dB(A) (standard deviation: 3 dB), och vibration ✱ m/s

(hand-arm metod).

Teknisk tillverkningsdokumentation finns hos: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE KONFORMITETSERKLÆRING Vi erklærer under almindeligt ansvar, at dette produkt er i overensstemmelse med følgende

normer eller normative dokumenter: EN 60 745, EN 55 014, i henhold til bestemmelserne i direktiverne 2006/95/EF, 2004/108/EF, 98/37/EF (indtil 28.12.2009), 2006/42/EF (fra 29.12.2009). STØJ/VIBRATION Måles efter EN 60 745 er lydtrykniveau af dette værktøj 85 (4003)/87 (4170) dB(A) og lydeffektniveau 96 (4003)/98 (4170) dB(A) (standard deviation: 3 dB), og vibrationsniveauet ✱ m/s

(hånd-arm metoden).

Teknisk dossier hos: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE SAMSVARSERKLÆRING Vi erklærer at det er under vårt ansvar at dette produkt er i samsvar med følgende standarder eller

standard- dokumenter: EN 60 745, EN 55 014, i samsvar med reguleringer 2006/95/EF, 2004/108/EF, 98/37/EF (frem til 28.12.2009), 2006/42/EF (fra 29.12.2009). STØY/VIBRASJON Målt ifølge EN 60 745 er lydtrykknivået av dette verktøyet 85 (4003)/87 (4170) dB(A) og lydstyrkenivået 96 (4003)/98 (4170) dB(A) (standard deviasjon: 3 dB), og vibrasjonsnivået ✱ m/s

(hånd-arm metode).

Tekniske underlag hos: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme täten ja vastaamme yksin siitä, että tämä tuote en allalueteltujen

standardien ja standardoimisasiakirjojen vaatimusten mukainen EN 60 745, EN 55 014, seuraavien sääntöjen mukaisesti 2006/95/EY, 2004/108/EY, 98/37/EY (28.12.2009 asti), 2006/42/EY (29.12.2009 alkaen). MELU/TÄRINÄ Mitattuna EN 60 745 mukaan työkalun melutaso on 85 (4003)/87 (4170) dB(A) ja yleensä työkalun äänen voimakkuus on 96 (4003)/98 (4170) dB(A) (keskihajonta: 3 dB), ja tärinän voimakkuus ✱ m/s

(käsi-käsivarsi metodi).

Tekninen tiedosto kohdasta: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola responsabilidad que este producto está en conformidad

con las normas o documentos normalizados siguientes: EN 60 745, EN 55 014, de acuerdo con las regulaciones 2006/95/CE, 2004/108/CE, 98/37/CE (hasta el 28.12.2009), 2006/42/CE (a partir del 29.12.2009). RUIDOS/VIBRACIONES Medido según EN 60 745 el nivel de la presión acústica de esta herramienta se eleva a 85 (4003)/ 87 (4170) dB(A) y el nivel de la potencia acústica 96 (4003)/98 (4170) dB(A) (desviación estándar: 3 dB), y la vibración a ✱ m/s

(método brazo-mano).

Expediente técnico en: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

FIN

08 SKIL Europe BV A. v.d. Kloot

ЗАЯВЛЕНИЕ О СООТВЕТСТВИИ Мы с полной ответственностыо заявляем, что это изделие соответствует следующим стандартам или станда ртизованным документам: EN 60 745, EN 55 014, в соответсувии с инструкциями 2006/95/EC, 2004/108/EC, 98/37/EC (до 28.12.2009), 2006/42/EC (начиная с 29.12.2009). ШУМНОСТИ/ВИБРАЦИИ При измерении в соответствии co стандартoм EN 60 745 уровень звукового давления для этого инструмента составляет 85 (4003)/87 (4170) дБ (A) и уровeнь звуковой мощности - 96 (4003)/98 (4170) дБ (A) (стандартное отклонение: 3 dB), и вибрации - ✱ м/с

(по методу для рук).

Техническая документация у: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE ВІДПОВІДНІСТЬ Ми заявляємо, що відповідність даного продукту наступним стандартам і регулюючим документам повністю нашою відповідальністю: EN 60 745, EN 55 014, відповідно до положень директив 2006/95/EG, 2004/108/EG, 98/37/EG до 28.12.2009 p.), 2006/42/EG (після 29.12.2009 p.). ШУМ/ВІБРАЦІЯ Зміряний відповідно до EN 60 745 рівень тиску звуку даного інструменту 85 (4003)/87 (4170) дБ(А) i потужність звуку 96 (4003)/98 (4170) дБ(А) (стандартне відхилення: 3 дБ), i вібрація ✱ м/с

(ручна методика).

Технічні документи в: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE ∆ΗΛΩΣΗ ΣYMBATOTΗΤΑΣ ∆ηλώνουµε υπευθύνως τι το προϊν αυτ είναι κατασκευασµένο σύµφωνα µε τους εξής κανονισµούς ή κατασκευαστικές συστάσεις: EN 60 745, EN 55 014, κατά τις διατάξεις των κανονισµών της Κοινής Αγοράς 2006/95/EK, 2004/108/EK, 98/37/EK (έως 28.12.2009), 2006/42/EK (απ 29.12.2009). ΘΟΡYΒΟ/ΚΡΑ∆ΑΣΜΟYΣ Μετρηµένη σύµφωνα µε EN 60 745 η στάθµη ακουστικής πίεσης αυτού του εργαλείου ανέρχεται σε 85 (4003)/87 (4170) dB(A) και η στάθµη ηχητικής ισχύoς σε 96 (4003)/98 (4170) dB(A) (κοινή απκλιση: 3 dB), και ο κραδασµς σε ✱ m/s

(µεθοδος χειρς/βραχίονα).

Τεχνικς φάκελος απ: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

OÂWIADCZENIE ZGODNOÂCI CE Niniejszym oÊwiadczamy ponoszàc osobistà odpowiedzialnoÊç, ˝e produkt wykonany jest zgodnie z nast´pujàcymi normami i dokumentami normalizujàcymi: EN 60 745, EN 55 014, z godnie z wytycznymi 2006/95/EU, 2004/108/EU, 98/37/EU (do 28.12.2009), 2006/42/EU (od 29.12.2009). HA¸ASU/WIBRACJE Pomiarów dokonano zgodnie z normà EN 60 745 ciÊnienie akustyczne narz´dzia wynosi 85 (4003)/ 87 (4170) dB(A) zaÊ poziom mocy akustycznej 96 (4003)/98 (4170) dB(A) (poziom odchylenie: 3 dB), zaÊ wibracje ✱ m/s

(metoda

d∏oƒ-r´ka). Dokumentacja techniczna: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE DECLARAÇÃO DE CONFIRMIDADE Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as

seguintes normas ou documentos normativos: EN 60 745, EN 55 014, conforme as disposições das directivas 2006/95/CE, 2004/108/CE, 98/37/CE (até 28.12.2009), 2006/42/CE (a partir de 29.12.2009). RUÍDO/VIBRAÇÕES Medido segundo EN 60 745 o nível de pressão acústica desta ferramenta é 85 (4003)/87 (4170) dB(A) e o nível de potência acústica 96 (4003)/98 (4170) dB(A) (espaço de erro: 3 dB), e a vibração ✱ m/s

(método braço-mão).

Processo técnico em: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE DICHIARAZIONE DI CONFORMITÀ Dichiaramo, assumendo la piena responsabilità di tale dichiarazione, che il prodotto è

conforme alle seguenti normative e ai relativi documenti: EN 60 745, EN 55 014 in base alle prescrizioni delle direttive 2006/95/EG, 2004/108/EG, 98/37/EG (fino al 28.12.2009), 2006/42/EG (a partire dal 29.12.2009). RUMOROSITÀ/VIBRAZIONE Misurato in conformità al EN 60 745 il livello di pressione acustica di questo utensile è 85 (4003)/ 87 (4170) dB(A) ed il livello di potenza acustica 96 (4003)/98 (4170) dB(A) (deviazione standard: 3 dB), e la vibrazione ✱ m/s

(metodo mano-braccio).

Fascicolo tecnico presso: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE MINÖSÉGI TANUSITVANY Teljes felelösségünk tudatában kijelentjük, hogy jelen termék a következö szabványoknak vagy kötelezö hatósági elöírásoknak megfelel: EN 60 745, EN 55 014, a 2006/95/EK, 2004/108/EK, 98/37/EK (2009.12.28-ig), 2006/42/EK (2009.12.29-tŒl kezdve) elöírásoknak megfelelöen. ZAJ/REZGÉS Az EN 60 745 alapján végzett mérések szerint ezen készülék hangnyomás szintje 85 (4003)/87 (4170) dB(A) a hangteljesítmény szintje 96 (4003)/98 (4170) dB(A) (normál eltérés: 3 dB), a rezgésszám ✱ m/s

(kézre-ható érték).

A mıszaki dokumentáció a következŒ helyen található: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE STRVZUJÍCÍ PROHLÅ◊ENÍ Potvrzujeme na odpovπdnost, Ωe tento v¥robek odpovídå nåsledujícím normåm nebo normativním podkladüm: EN 60 745, EN 55 014, podle ustanovení smπrnic 2006/95/ES, 2004/108/ES, 98/37/ES (do 28.12.2009), 2006/42/ES (od

29.12.2009). HLUÇNOSTI/VIBRACÍ Mπ®eno podle EN 60 745 çiní tlak hlukové vlny tohoto p®ístroje 85 (4003)/87 (4170) dB(A) a dávka hluçnosti 96 (4003)/98 (4170) dB(A) (standardní odchylka: 3 dB), a vibrací ✱ m/s

(metoda ruka-paΩe).

Technická dokumentace u: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE STANDARDIZASYON BEYANI Ye¤ane sorumlu olarak, bu ürünün aﬂa¤ıdaki standartlara veya standart belgelerine uygun oldu¤unu beyan ederiz: EN 60 745, EN 55 014, yönetmeli¤i hükümleri uyarınca 2006/95/EG, 2004/108/EG, 98/37/EG (28.12.2009 tarihine kadar), 2006/42/EG (29.12.2009 tarihinden itibaren). GÜRÜLTÜ//T‹TREﬁIM Ölçülen EN 60 745 göre ses basıncı bu makinanın seviyesi 85 (4003)/87 (4170) dB(A) ve çal›ﬂma s›ras›ndaki gürültü 96 (4003)/98 (4170) dB(A) (standart sapma: 3 dB), ve titreﬂim ✱ m/s

(el-kol metodu).

Teknik belgelerin bulundu¤u merkez: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

08 SKIL Europe BV A. v.d. Kloot

DECLARAØIE DE CONFORMITATE CE Declaråm pe proprie råspundere cå acest product este conform cu urmåtoarele standarde sau documente standardizate: EN 60 745, EN 55 014, în conformitate cu regulile 2006/95/CE, 2004/108/CE, 98/37/CE (pânå la

28.12.2009), 2006/42/CE (începând cu 29.12.2009). ZGOMOT/VIBRAØII Måsurat în conformitate cu EN 60 745 nivelul de presiune a sunetului generat de acest instrument este de 85 (4003)/87 (4170) dB(A) iar nivelul de putere a sunetului 96 (4003)/98 (4170) dB(A) (abaterea standard: 3 dB), iar nivelul vibraøiilor ✱ m/s

(metoda mînå - braø).

Documentaøie tehnicå la: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE ДЕKЛАPAЦИЯ ЗA CБOTВETCTBИE Декларираме на изцяло наша отговорност, че това изделие е съобразено със следните стандарти или стандартизирани документи: EN 60 745, EN 55 014, в съответствие с нормативната уредба на 2006/95/EG, 2004/108/EG, 98/37/EG (до 28.12.2009), 2006/42/EG (от 29.12.2009).

ШУМ/ВИБPAЦИИ Измерено в съответствие с EN 60 745 нивото на звуково налягане на този инструмент е 85 (4003)/ 87 (4170) dB(A) а нивото на звукова мощност е 96 (4003)/98 (4170) dB(A) (стандартно отклонение: 3 dB), а вибрациите

са ✱ m/s

(метод ръка-рамо).

Подробни технически описания при: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE IZJAVA O USKLA ĐENOSTI Izjavljujemo uz punu odgovornost da je ovaj proizvod usklađen sa slijedeçim normama i normativnim dokumentima: EN 60 745, EN 55 014, prema odredbama smjernica 2006/95/EG, 2004/108/EG, 98/37/EG (do

28.12.2009), 2006/42/EG (od 29.12.2009). BUCI/ VIBRACIJAMA Mjereno prema EN 60 745, prag zvuãnog tlaka ovog elektriãnog alata iznosi 85 (4003)/87 (4170) dB(A) a jakost zvuka 96 (4003)/98 (4170) dB(A) (standardna devijacija: 3 dB), a vibracija ✱ m/s

(postupkom na ‰aci-ruci).

Tehniãka dokumentacija se moÏe dobiti kod: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE IZJAVA O USKLA ĐENOSTI Pod punom odgovorno‰çu izjavljujemo da je ovaj proizvod usklađen sa sledeçim standardima ili standardizovanim dokumentima: EN 60 745, EN 55 014, u skladu sa odredbama smernica 2006/95/EG, 2004/108/EG, 98/37/EG (do

28.12.2009), 2006/42/EG (od 29.12.2009). BUKA/VIBRACIJE Mereno u skladu sa EN 60 745, nivo pritiska zvuka ovog alata iznosi 85 (4003)/87 (4170) dB(A), a jaãina zvuka 96 (4003)/98 (4170) dB(A) (normalno odstupanje: 3 dB), a vibracija ✱ m/s

(mereno metodom na ‰aci-ruci).

Tehniãka dokumentacija kod: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

SRB

IZJAVA O USTREZNOSTI CE Odgovorno izjavljamo, da je ta izdelek v skladu z naslednjimi standardi ali standardnimi dokumenti: EN 60 745, EN 55 014, v skladu s predpisi navodil 2006/95/ES, 2004/108/ES, 98/37/ES (do 28.12.2009), 2006/42/ES (od 29.12.2009). HRUP/VIBRACIJA Izmerjeno v skladu s predpisom EN 60 745 je raven zvoãnega pritiska za to orodje 85 (4003)/87 (4170) dB(A) in jakosti zvoka 96 (4003)/98 (4170) dB(A) (standarden odmik: 3 dB), in vibracija ✱ m/s

(metoda ‘dlan-roka’).

Tehniãna dokumentacija se nahaja pri: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

SLO

CE VASTAVUSDEKLARATSIOON Kinnitame ainuvastutajana, et see toode vastab järgmistele standarditele või normdokumentidele: EN 60 745, EN 55 014 vastavalt direktiivide 2006/95/EÜ, 2004/108/EÜ, 98/37/EÜ (kuni 28.12.2009), 2006/42/EÜ (alates 29.12.2009) nõuetele. MÜRA/VIBRATSIOON Vastavalt kooskõlas normiga EN 60 745 läbi viidud mõõtmistele on antud seadme helirõhk 85 (4003)/ 87 (4170) dB(A) ja helitugevus 96 (4003)/98 (4170) dB(A) (standardkõrvalekalle: 3 dB), ja vibratsioon ✱ m/s

(käe-randme-meetod).

Tehniline toimik saadaval aadressil: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

EST

CE DEKLARÅCIJA PAR ATBILST±BU STANDARTIEM Mïs ar pilnu atbild¥bu pazi¿ojam, ka ‰is izstrÇdÇjums atbilst standartiem vai standartizÇcijas dokumentiem EN 60 745, EN 55 014 un ir saska¿Ç ar direkt¥vÇm 2006/95/ES, 2004/108/ES, 98/37/ES (l¥dz

28.12.2009) un 2006/42/ES (no 29.12.2009). TROKSNIS/VIBRÅCIJA Saska¿Ç ar standartu EN 60 745 noteiktais instrumenta rad¥tÇ trok‰¿a ska¿as spiediena l¥menis ir 85 (4003)/87 (4170) dB(A) un ska¿as jaudas l¥menis ir 96 (4003)/98 (4170) dB (A) (pie tipiskÇs izkliedes: 3 dB), un vibrÇcijas intensitÇte ir

CE ATITIKTIES DEKLARACIJA Mes atsakingai parei‰kiame, kad ‰is gaminys atitinka tokius standartus ir normatyvinius dokumentus: EN 60 745, EN 55 014 pagal reglament˜ 2006/95/EB, 2004/108/EB, 98/37/EB (iki 2009-12-28), 2006/42/EB (nuo 2009-12-29) nuostatas. TRIUK·MINGUMAS/VIBRACIJA ·io prietaiso triuk‰mingumas buvo i‰matuotas pagal EN 60 745 reikalavimus keliamo triuk‰mo garso slògio lygis siekia 85 (4003)/87 (4170) dB(A) ir akustinio galingumo lygis 96 (4003)/98 (4170) dB(A) (standartinis nuokrypis: 3 dB), ir vibracijos pagreitis rankos pla‰takos srityje tipiniu atveju yra maÏesnis, kaip ✱ m/s

Techninò byla laikoma: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

CE PREHLÁSENIE O ZHODE Vÿhradne na na√u vlastnú zodpovednos† prehlasujeme, Ωe tento vÿrobok zodpovedá nasledujúcim normám alebo normovanÿm dokumentom: EN 60 745, EN 55 014, v súlade s predpismi 2006/95/EG, 2004/108/EG, 98/37/EG (do

28.12.2009), 2006/42/EG (od 29.12.2009). HLUKU/VIBRÁCIÁCH Merané pod¬a EN 60 745 je úroveµ akustického tlaku tohto nástroja 85 (4003)/87 (4170) dB(A) a úroveµ akustického vÿkonu je 96 (4003)/98 (4170) dB(A) (√tandardná odch¥lka: 3 dB), a vibrácie sú ✱ m/s

(metóda ruka - paΩa).

Súbor technickej dokumentácie sa nachádzajú na adrese: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.

123

When cutting wood When cutting metal Uncertainty (K)

Pendant le coupage du bois Pendant le coupage du métal Incertitude (K)

Beim Sägen von Holz Beim Sägen von Metall Unsicherheit (K)

Bij het zagen van hout Bij het zagen van metaal Onzekerheid (K)

För sågning i trä För sågning i metall Onoggrannhet (K)

Ved savning i træ Ved savning i metal Usikkerhed (K)

Ved skjæring i tre Ved skjæring i metall Usikkerhet (K)

Puun sahattaessa Metallin sahattaessa Epävarmuus (K)

Al cortar madera Al cortar metales Incertidumbre (K)

Ao cortar madeira Ao cortar metais Incerteza (K)

Quando si tagliano legno Quando si tagliano metalli Incertezza (K)

Fa bagazazo Fém bagazazo Szórás (K)

Pﬁi ﬁezání dﬁeva Pﬁi ﬁezání kovÛ Nepﬁesnost (K)

Tahta keserken Metalleri keserken Tolerans (K)

Podczas ci´cia drewna Podczas ci´cia metalu B∏àd pomiaru (K)

Пpи pаботе с деревами Пpи pаботе с металлами Недостоверность (K)

При різанні деревини При різанні металу Похибка (K)

Oταν κβετε ξύλo Oταν κβετε µέταλλα Ανασφάλεια (K)

Când tåiaøi lemn Când tåiaøi metale Incertitudine (K)

Пpи pязане на дърво Пpи pязане на метал Неопределеност (K)

Pri rezaní dreva Pri rezaní kovu NepresnosÈ (K)

Kod rezanja drva Kod rezanja metala Nesigurnost (K)

Kada seãete drvo Kada seãete metal Nesigurnost (K)

Pri rezanju les Pri rezanju kevin Netoãnost (K)

Puidu saagimisel Metalli saagimisel Mõõtemääramatus (K)

ZÇÆïjot kokÇ ZÇÆïjot metÇlu Izkliede (K)

Pjaudami medÏia Pjaudami metalà Paklaida (K)

EST

SLO

SRB

FIN

✱

4003 4170

1 11,0 m/s

1 9,5 m/s

2 8,6 m/s

2 9,3 m/s

3 1,5 m/s

Skil 4003, 4170 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual