SilverCrest SMS 300 A1 User manual [gb]

ANTI DUST MITES HANDHELD VACUUM CLEANER SMS 300 A1
ANTI DUST MITES HANDHELD VACUUM CLEANER
Operating instructions and safety instructions
MILBENSAUGER
Bedienungsanleitung und Sicherheitshinweise
IAN 305356
ΣΚΟΥΠΆΚΙ ΓΙΆ ΆΚΆΡΕΆ
Οδηγίες χρήσης και υποδείξεις ασφαλείας
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
GB / IE / NI / CY Operating instructions Page 1 GR / CY Οδηүίες χρήσης Σελίδα 19 DE / AT / CH Bedienungsanleitung Seite 37
Contents
Introduction ...................................................2
Copyright ............................................................... 2
Intended use ............................................................ 2
Setting up .....................................................3
Package contents and transport inspection ..................................... 3
Disposal of the packaging .................................................. 3
Safety information .............................................4
Parts and operating components .................................9
Safety switches ...............................................9
Operation ...................................................10
Usage recommendations .......................................11
Cleaning .....................................................11
Emptying dust container. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the dust filter .................................................... 12
Cleaning the UV-C lamp ..................................................13
Storage .....................................................13
Disposal of the appliance .......................................13
Troubleshooting ..............................................14
Fault causes and remedies ................................................. 14
Appendix ....................................................15
Technical data ..........................................................15
Ordering spareparts ..................................................... 16
Kompernass Handels GmbH warranty ....................................... 17
Service ................................................................ 18
Importer ............................................................... 18
SMS 300 A1
GB│IE│NI│CY 
 1
Introduction
Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of
this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.
Copyright
This documentation is protected by copyright. Any copying or reproduction, including in the form of extracts, or any
reproduc tion of images (even in a modified state), is permitted only with the written authorisation of the manufacturer.
Intended use
The appliance is intended exclusively for killing bacteria and removing dust, germs and house mites. It is suitable for use on mattresses, bed sheets, duvets, upholstered furniture and the like. It may only be used indoors and in private households. Any other use is deemed improper.
The appliance is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk is borne solely by the user.
2 │ GB
│IE│NI│
CY
SMS 300 A1
Setting up
Package contents and transport inspection
(See fold-out page for illustrations)
DANGER!
Do not allow children to play with packaging materials. There is a risk of
suffocation.
♦ Remove all parts of the appliance and the operating instructions from the
carton.
♦ Remove all packaging materials from the appliance.
The following components are included in delivery:
Mite vacuum cleaner SMS 300 A1Operating instructions
NOTE
Check the package for completeness and signs of visible damage.If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact Customer Service (see section Service).
Disposal of the packaging
Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites.
SMS 300 A1
GB│IE│NI│CY 
 3
Safety information
RISK OF ELECTRIC SHOCK!
The rating of the power supply must correspond with the
details given on the rating plate of the appliance.
To avoid potential risks, arrange for a defective appliance
to be checked and, if required, repaired by qualified technicians, or contact our Customer Service Department.
Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury.
Pull only on the plug itself when unplugging the appliance,
never on the power cable.
Never bend (kink) or crush the power cable; always route it
in such a way that it cannot come into contact with hot surfaces and such that no one can step on it or trip over it.
Disconnect the mains plug before cleaning and after each
use.
Always unwind the power cable fully before switching on
and do not use an extension cable.
Never touch the power cable or the plug with wet hands.Never use the appliance adjacent to water contained in a
bath, shower, wash basin or other vessels. The proximity of water is hazardous, even if the appliance is switched off.
4 │ GB
│IE│NI│
CY
SMS 300 A1
RISK OF ELECTRIC SHOCK!
Under no circumstances should the appliance be immersed
in liquids or liquids be allowed to penetrate the housing.
Do not expose the appliance to humidity and do not use it
outdoors. If any liquid gets into the housing, disconnect the appliance from the power socket immediately and have it repaired by a qualified technician.
Do not open the appliance housing. If the appliance is
defective, have it repaired by an authorised technician only.
Do not use the appliance if it shows visible signs of
damage, has fallen or leaks water. Arrange for it to be repaired by qualified specialists.
This appliance may be used by children aged 8 years or
more and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised by an adult or have been instructed in the safe use of the appliance and have understood the potential risks.
Do not allow children to use the appliance as a toy.
Cleaning and user maintenance may not be carried out by children unless they are supervised.
SMS 300 A1
GB│IE│NI│CY 
 5
RISK GROUP 3
This appliance contains a lamp that is classified as risk group
3. WARNING – UV emitted from this product.
Avoid eye and skin exposure to unshielded product.
WARNING
UV emitted from this product. Avoid eye and skin exposure to unshielded product.
WARNING! RISK OF INJURY!
Use this appliance only when it is assembled. In particular,
the cover of the UV-C lamp must be correctly installed before use! Use this appliance only as described in these operating instructions. Never look directly into the UV-C lamp. UV radiation can lead to injuries to your eyes and skin.
Never use the appliance on people or animals! UV
radiation can lead to injuries to eyes and skin.
The bactericidal ultraviolet rays of the UV-C lamp on the
underside of the appliance are harmful to eyes and skin. Never expose yourself, other persons or animals to direct or reflected radiation. In case of exposure to the radiation, seek medical attention immediately.
Make sure that the safety switches of the UV-C lamp are
not blocked.
Keep animals, hair, jewellery, loose clothing, fingers and all
other parts of the body away from the suction opening of the appliance in order to prevent tight suction. Switch the appliance off immediately if it sucks onto any body part or object.
6 │ GB
│IE│NI│
CY
SMS 300 A1
WARNING! RISK OF INJURY!
Do not touch the vibration head during operation.Ensure that the connected power cable is not a hazard to
tripping.
Never leave the appliance unattended while it is switched
on or connected to the mains power supply. Children should be supervised to ensure that they do not play with the appliance.
Never allow children to use the appliance unattended.Allow the UV-C lamp to cool down sufficiently after use.
Otherwise, there is a risk of burns.
Never place your hand under the appliance while it is still
in operation.
RISK OF FIRE!
Do not insert anything into the openings of the appliance
and make sure that they are not blocked.
Make sure that the ventilation openings on the sides of the
appliance are not blocked.
To avoid a fire during operation, do not cover the
appliance.
Do not use the appliance in rooms containing highly
flammable substances or toxic or explosive vapours.
In case of fire, do not extinguish the appliance with water.
Asphyxiate flames with a fireproof blanket or use a suitable fire extinguisher.
SMS 300 A1
GB│IE│NI│CY 
 7
CAUTION! PROPERTY DAMAGE!
Do not use the appliance to vacuum up the following items:
– flammable or flammable substances – glowing embers, burning cigarettes, matches, etc. – liquids or wet substances (e.g. wet carpet shampoo) – very fine dust (e.g. concrete dust), ash or toner – sharp, hard objects (e.g. glass splinters)
Do not place or lay any heavy objects on the product,
power plug, or powercable.
Do not attempt to lubricate the rollers with lubricant or oil.
This would cause more dust and dirt to stick to the rollers.
Do not clean the appliance with aggressive, chemical or
abrasive cleaning agents. They could damage it.
8 │ GB
│IE│NI│
CY
SMS 300 A1
Parts and operating components
(See fold-out page for illustrations)
1 Handle 2 On/Off switch 3 Dust container 4 Dust filter (in the dust container) 5 Ventilation opening 6 Power cable 7 Vibration head 8 UV-C lamp 9 Suction opening 0 Safety switches q Rollers w Vibration button e UV-C lamp cover
Safety switches
The appliance has two safety switches 0on the left and rightof the underside of the appliance. The UV-C lamp 8 only switches on when the vibration button w is pressed if both safety switches the automatic switch-off of the UV-C lamp the switched-on appliance is placed on a level surface (fig. A).
0are pressed simultaneously. This deactivates
8. This happens automatically when
A
If the safety switches lose contact with the substrate, the automatic switch-off function is activated and the UV-C lamp 8stops lighting (figs. B and C).
B
SMS 300 A1
UV-C lamp on
UV-C lamp off
C
UV-C lamp off
GB│IE│NI│CY 
 9
Operation
Never look into the UV-C lamp Never use the appliance on people or animals! UV radiation can lead to
injuries to eyes and skin.
Only operate the appliance when it has been properly assembled.
This is the only way to avoid the dangers of UV radiation.
Use this appliance only as described in these operating instructions.
This is the only way to avoid the dangers of UV radiation.
NOTE
Use the appliance only if it is completely and correctly assembled. The
dust container undamaged. If dirt gets into the motor of the unit, it could cause motor damage.
Make sure that the safety switches of the UV-C lamp
of the appliance are not blocked.
Test the appliance on a small, unobtrusive spot first.
1) Plug the power plug into a properly installed, easily accessible wall outlet.
2) Place the appliance flat on the surface to be cleaned.
3) Press the On/Off switch vacuuming.
4) Press the vibration button shakes up the surface to be cleaned and the swirled up dust is sucked in through the suction opening 9. Pressing the vibration button walso switches on the UV-C lamp
5) Move the appliance evenly over the surface to be cleaned.
6) After vacuuming, press the On/Off switch
7) Unplug the appliance from the mains socket.
WARNING! RISK OF INJURY!
8during use!
3and the dust filter 4must be inserted correctly and
8 on the underside
2 to turn on the appliance. The appliance starts
w to activate the vibration head 7. The vibration
8.
2 to turn off the appliance.
10 │ GB
│IE│NI│
CY
SMS 300 A1
Usage recommendations
♦ Always clean mattresses from both sides. ♦ New mattresses should be cleaned once a month. Older mattresses should
first be cleaned daily for one week. Afterwards, cleaning should take place once a month.
♦ The dust filter
use, the UV-C lamp 8 every 12 – 24 months. If you have any questions about spare parts, please contact customer service (see section Service).
4should be changed every 12 –18 months depending on
Cleaning
RISK OF ELECTRIC SHOCK!
Before cleaning the appliance, disconnect the power plug from the power
socket. Otherwise, there is a risk of electrocution.
CAUTION! PROPERTY DAMAGE!
Do not use abrasive, aggressive or chemical cleaning agents.
They can damage the surface and also lead to irreparable damage to the appliance.
♦ Clean the appliance only with a soft cloth lightly moistened with water. ♦ Empty the dust container
4 must also be cleaned regularly to avoid overloading the motor.
Emptying dust container
♦ Pull the dust container 3upwards out of the appliance (fig. D).
3after each use of the appliance. The dust filter
SMS 300 A1
D
GB│IE│NI│CY 
 11
♦ Reach into the opening of the dust filter 4and pull it out of the dust
con tainer 3(fig. E).
E
♦ Remove the cover of the dust container 3(fig. F).
F
♦ Empty the dust container 3. ♦ If necessary, wipe the dust container
con tainer 3 with a dry duster.
♦ Also wipe the cover of the dust container ♦ Replace the cover of the dust container
completely pushed into the dust container 3 and closes it tightly.
3and the recess for the dust
3 with a dry duster.
3. Make sure that the cover is
Cleaning the dust filter
♦ Knock out the dust filter 4 after pulling it out of the dust container 3. ♦ If necessary, clean the dust filter
NOTE
Do not clean the dust filter
♦ After cleaning, replace the dust filter
firmly seated.
12 │ GB
│IE│NI│
CY
4 with a soft brush.
4 with water.
4 in the dust container 3 so that it is
SMS 300 A1
NOTE
New dust filters
(see section Ordering spare parts).
4 can be reordered from the customer service
♦ Replace the empty dust container
recess for the dust container 3on the appliance.
Cleaning the UV-C lamp
WARNING! RISK OF INJURY!
The UV-C lamp
down sufficiently after use. Otherwise, there is a risk of burns.
♦ Use a screwdriver to loosen the screw on the cover
and remove the cover e.
♦ Wipe the UV-C lamp
NOTE
♦ Be careful not to touch the UV-C lamp
♦ Put on the cover
8gets hot during use. Allow the UV-C lamp 8 to cool
8with a dry duster.
e and fix it again with the screw.
Storage
♦ Store the appliance in a clean and dry place away from direct sunlight.
Disposal of the appliance
NOTE
Remove the UV-C lamp
of it separately from the appliance.
8 before disposing of the appliance and dispose
3 with the inserted dust filter 4 in the
eof the UV-C lamp 8
8with your fingers.
The adjacent symbol of a crossed-out wheelie bin means that this appliance is subject to Directive 2012/19/EU. This directive states that this appliance may not be disposed of in normal household waste at the end of its useful life, but must be brought to a specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the environment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
SMS 300 A1
GB│IE│NI│CY 
 13
Troubleshooting
This section contains important information on fault identification and rectification. Follow the instructions to avoid hazards and damage.
Fault causes and remedies
The following table will help you to identify and rectify minor malfunctions. If the solutions presented below do not resolve the problem, please contact Customer Service (see section Service).
Fault Cause Remedy
The appliance does not suck.
The suction power is too weak.
The UV-C lamp does not light up.
The vibration head
7does not
vibrate.
An unpleasant odour escapes from the appliance during suction.
8
The appliance is not switched on.
The plug is not plugged in.
The mains socket is not supplying power.
The dust container full.
The dust filter
The suction opening is blocked.
The automatic switch-off device of the UV-C lamp
3is
4 is dirty. Clean the dust filter 4.
9
8 has been activated.
The UV-C lamp appliance is defective.
The vibration function is not switched on.
Odours often develop when new appliances are used for the first time.
The appliance is defective.
8or
Make sure that the appliance is properly connected to the power supply and press the On/Off switch
Insert the power plug into the socket.
Check the house fuses
Empty the dust container
Turn off the appliance, pull out the
plug from the wall socket
and remove the blockage.
Check the safety switches left and right (see section Safety switches).
Contact Customer Service (see section Service).
Press the vibration button
The smell should disappear after the appliance has been used a few times.
Switch off the appliance, pull out the power plug socket and contact Customer Service (see section Service).
2.
3.
0
w.
from the
14 │ GB
│IE│NI│
CY
SMS 300 A1
Appendix
Technical data
Power supply 220 – 240 V ∼ (alternating current), 50 – 60Hz
Power consumption 300 W
Protection class
Light bulb 6 W, G5, UV-C
Classification of the UV-C lamp risk group
(double insulation)
II /
Risk group 3
SMS 300 A1
GB│IE│NI│CY 
 15
Loading...
+ 40 hidden pages