Silvercrest KH2376 06 Operating Instructions Manual
■ BLUETOOTH CAR RADIO
DK
Operating instructions
Betjeningsvejledning
KOMPERNASS GMBH ⋅ BURGSTRASSE 21 ⋅ D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH2376 06/2009-V3
BLUETOOTH CAR RADIO
BLUETOOTH-BILRADIO
3C
GB
KH 2376
CV_KH2376_37758_LB3C.indd 1-4CV_KH2376_37758_LB3C.indd 1-4 08.10.2009 15:48:51 Uhr08.10.2009 15:48:51 Uhr
Operating instructions ................................................................... 5
Betjeningsvejledning ...................................................................43
DK
KH 2376
4 5 6 7 8 9
10 11
121314151617181920212223242526
27
28 29
32
33
34
353637383940
28
41
2
3
42 43 44 45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
65
64
63
62
66
68
69
67
70
GB
30
31
,
CV_KH2376_37758_LB3C.indd 5-8CV_KH2376_37758_LB3C.indd 5-8 08.10.2009 15:48:52 Uhr08.10.2009 15:48:52 Uhr
Index
GB
Introduction . . . . . . . . . . . . . .6
Preface . . . . . . . . . . . . . . . . . . . . . . . 6
Information for these
operating instructions . . . . . . . . . . . . 6
Copyright . . . . . . . . . . . . . . . . . . . . . 6
Limited liability . . . . . . . . . . . . . . . . . 7
Warnings . . . . . . . . . . . . . . . . . . . . . 7
Proper use. . . . . . . . . . . . . . . . . . . . . 8
Safety . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Safety Instructions . . . . . . . . . . 8
Danger from laser radiation . . . . . . . 9
Traffi c safety . . . . . . . . . . . . . . . . . .10
Interaction with batteries . . . . . . . .10
Package contents and transport
inspection . . . . . . . . . . . . . . . . . . . .11
Disposal of the packaging . . . . . . .11
Operating elementse
(see foldout sides) . . . . . . . .12
Installation . . . . . . . . . . . . . .14
Connection . . . . . . . . . . . . . . . . . . .14
Installation . . . . . . . . . . . . . . . . . . .16
Uninstalling the device . . . . . . . . . .18
Initial operation . . . . . . . . . .19
Face plate . . . . . . . . . . . . . . . . . . . .19
Remote control . . . . . . . . . . . . . . . .20
Handling and operation . . .20
Switching On and Off . . . . . . . . . .21
Settings . . . . . . . . . . . . . . . . . . . . . .21
Radio reset (RESET) . . . . . . . . . . . .23
Radio functions . . . . . . . . . . . . . . . .23
General CD functions . . . . . . . . . .26
MP3 CDs functions . . . . . . . . . . . . 28
USB port . . . . . . . . . . . . . . . . . . . . .29
Card reader (SD/MMC) . . . . . . . .30
Record function . . . . . . . . . . . . . . . .30
Connecting an external audio
device to the car radio . . . . . . . . . .32
Bluetooth operation . . . . . . . . . . . .32
Cleaning . . . . . . . . . . . . . . . .34
Safety instructions . . . . . . . . . . . . . .34
Cleaning . . . . . . . . . . . . . . . . . . . . .34
Troubleshooting . . . . . . . . . .35
Safety instructions . . . . . . . . . . . . . .35
Malfunction causes and remedies . 35
Disposal . . . . . . . . . . . . . . . . .38
Disposal of the device . . . . . . . . . . 38
Disposing of the batteries . . . . . . . . 38
Appendix . . . . . . . . . . . . . . .38
Technical data . . . . . . . . . . . . . . . .38
Declaration of EC conformity . . . .39
Warranty . . . . . . . . . . . . . . . . . . . .40
Importer . . . . . . . . . . . . . . . . . . . . .40
Bluetooth Car Radio KH 2376
5
GB
Introduction
Introduction
Preface
Dear customer,
by purchasing the Bluetooth car radio you have decided on a quality product
from SilverCrest, which, in terms of technology and functionality, meets the most
up-to-date development standards.
Read the information included here so that you can quickly familiarize yourself
with your device and thus make full use of its functions.
We wish you a great deal of enjoyable use.
Information for these operating instructions
These operating instructions are a component of the KH 2376 Bluetooth car radio
(henceforth designated as the device) and supplies you with important information for intended use, safety, installation and connection as well as operation of
the device.
The operating instructions must be constantly kept available close to the device.
They are to be read and used by anyone assigned to install, service and repair
faults in the device.
Keep these operating instructions and hand them over with the device to any future
owners.
Copyright
This documentation is copyright protected.
All rights including those of photographic reproduction, duplication and distribution
by means of particular methods (for example data processing, data carriers and
data networks), wholly or partially as well as substantive and technical changes
are reserved.
6
Bluetooth Car Radio KH 2376
Introduction
Limited liability
All technical information, data and information for installation, connection and
operation contained in these operating instructions correspond to the latest at time
of printing and, to the best of our knowledge, take into account our previous
experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to observe the instructions, improper use, inappropriate repairs, making unauthorized
changes or for using unapproved replacement parts.
Warnings
In the existing operation instructions the following warnings are used:
WARNING
GB
A warning of this danger level signifi es a possible dangerous
situation.
If the dangerous situation is not avoided it can lead to injuries.
The directives in this warning are there to avoid personal injuries. ►
IMPORTANT
A warning of this danger level signifi es possible pr
damage.
If the situation is not avoided it can lead to property damage.
The directives in this warning are there to avoid property damage. ►
NOTICE
A notice signifi es additional information that assists in the handling of the ►
device.
operty
Bluetooth Car Radio KH 2376
7
GB
Introduction
Proper use
This device is intended only for reception of FM/AM radio stations as well as
for the playback of audio and MP3 CDs, MP3 fi les from USB data carriers and
SD/MMC memory cards as well as audio signals of external audio devices.
In addition you can couple the device with a Bluetooth mobile phone and with the
microphone unit use the device as a hands free facility.
This device is not intended for any other use or for uses beyond those mentioned.
WARNING
Danger from unintended use!
Danger can come from the device if used for unintended purposes and/or
other types of use.
Use the device exclusively for intended purposes. ►
Observe the procedures described in these operating instructions. ►
Claims of any kind for damage resulting from unintended use will not be excepted.
The oper
ator alone bear
s liability.
Safety
In this chapter you receive important safety information regarding handling of the
device.
This device complies with the statutory safety regulations. Incorrect usage can,
however, lead to personal injury and property damage.
Basic Safety Instructions
For safe handling of the device observe the following safety information:
Before use check the device for visible external damage. Do not put into ■
operation a device that is damaged or has been dropped.
8
Bluetooth Car Radio KH 2376
Introduction
Damaged cables or connections should be replaced by authorized qualifi ed ■
persons or by the customer service department.
sons who, due to their physical, intellectual or motor abilities, are incapable ■
Per
of operating the device safely may only use the device under supervision or
direction fr
Only permit children to use the device under supervision. ■
Repairs should only be carried out by authorized specialist companies or ■
by the customer service department. Incorrect repairs can result in signifi cant
danger
A repair to the device during the warranty period may only be carried out by ■
a cutomer service department authorized by the manufacturer otherwise no
additional warr
Defective components may only be replaced with original replacement parts. ■
Only by using original replacement parts can you guarantee that the safety
requir
Protect the device from moisture and liquid penetration. ■
om a responsible person.
s for the user
ements are complied with.
. In addition warranty claims become void.
anty claims can be considered for subsequent damages.
GB
Danger from laser radiation
WARNING
The device is equipped with a class 1 laser.
Laser radiation is dangerous to the eyesight!
Observe the following safety instructions to avoid exposure of
yourself or others to laser radiation:
NEVER open the device. ►
Have the device repaired only by a specialist. ►
Do not make any modifi cations to the device. ►
Bluetooth Car Radio KH 2376
9
GB
Introduction
Traffi c safety
WARNING
Safety in traffi c has the highest priority!
Observe the following safety instructions so that you do not put yourself or
others in danger:
Before travel commencement familiarize yourself with the operation of the ►
device.
Only operate the de
place to carry out comprehensive operations.
Only remove or insert the face plate when the vehicle is parked. ►
Set to a moderate volume so that acoustic signals from the police, fi re ►
department and other rescue services can be heard in good time.
vice when the traffi c situation allows. Stop in a suitable ►
Interaction with batteries
WARNING
Danger from improper use!
For safe handling of batteries observe the following safety instructions:
Do not throw the batteries into a fi re. ►
Do not short circuit the batteries. ►
Do not attempt to recharge the batteries. ►
Regularly check the condition of the batteries. Leaking battery acid can
►
cause permanent damage to the device. Special caution should be shown
when handling damaged or leaking batteries. Danger from acid burns!
Wear protective gloves.
Store batteries in a place inaccessible to children. If swallowed seek ►
immediate medical attention.
ve the batteries from the remote control if you do not intend to use ►
Remo
the device for extended periods of time.
10
Bluetooth Car Radio KH 2376
Introduction
Package contents and transport inspection
WARNING
Risk of suff ocation!
Packaging material should not be used as a play thing. ►
There is a risk of suff ocation!
GB
The device is deliv
Car radio (incl. face plate) ▯
Installation bracket (Attached) ▯
Bezel frame (Attached) ▯
Fixture plate (incl. securing material) ▯
Remote control ▯
1 Battery CR2025, 3 V DC ▯
Keys for installation frame (2x) ▯
Case for face plate ▯
Microphone unit with adhesive strip ▯
Operating instructions ▯
NOTICE
Check the contents to make sure everything is there and for visible ►
damage.
If the contents are not complete or ar
packaging or through transportation contact the service hotline
(see warranty card).
ered with the following components as standard:
e damaged due to defective ►
Disposal of the packaging
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces generated waste. Dispose of packaging material that is no longer needed
according to the regionally established regulations.
NOTICE
If possible preserve the device's original packaging during the warranty ►
period so that in the case of a warranty claim you can package the device
properly for r
Bluetooth Car Radio KH 2376
eturn.
11
GB
Operating Elements
Operating elementse (see foldout sides)
POWER/DIM:
Switch device on and off /
dim display illumination
2
Multi controller:
Turn to set value/volume
3
MU:
Switch off sound/button
4
TA:
Activate traffi c radio/button
5
SEL:
Press or hold down to access
adjustment options
6
Display
7
AF:
Alternative frequency search
/ activate regional programmes
8
PTY:
Station search by PTY group
9
DISP:
Show display information
10
Unlocking the face plate
11
Card slot for SD/MMC cards
12
USB port
AUX IN:
13
3,5 mm stereo input socket for
the connection of an external
audio device
14
▸▸I:
Title / Station search forwards
17
Station button 6/next directory
18
Station button 5/previous
directory
19
RDM/4:
Random playback in the CD/
MP3 operation mode,
station button 4
20
INT/3:
Intro function in the CD/MP3
operation mode, station button 3
21
RPT/2:
Repeat function in the CD/
MP3 operation mode,
station button 2
22
PAU/1:
Stop playback in the CD/
MP3 operation mode, station
button 1
Sensor for remote control
23
24
BND/ENT:
Select band range/confi rm
selection
25
SCN/REC:
Automatic station search/
Record to a data carrier at
the USB port or the SD/MMC
card slot
26
MD/LD:
Set operating mode/
switch to loudness
15
I◂◂:
Title / Station search
backwards
16
A/PS:
Automatic station saving
12
27
OPEN:
Reject disc
28
Holder for the face plate
29
RESET:
Resetting the device
30
Theft protection LED
31
Positions LED of the CD
compartment
Bluetooth Car Radio KH 2376
Operating Elements
32
CD compartment
33
ISO-Block connection B
Automotive blade
34
type fuse 10 A
ISO block connection A
35
36
Bluetooth antenna
Socket for microphone unit
37
Securing screw
38
(incl. M5 nut and washer)
39
LINE OUT:
Audio cinch output L/R for
amplifi er
Antenna connection for
40
DIN antenna plug
41
POWER/DIM:
Switch device on and off /
dim display illumination
42
Button
I◂◂:
43
Title / Station search
backwards
44
VOL+:
Volume increase
45
Button
46
▸▸I:
Title / Station search forwards
47
INT/3:
Intro function in the CD/
MP3 operation mode,
number button 3
48
VOL-:
Volume decrease
49
PTY/7:
Station search by PTY group/
number button 7
50
Number button 6
51
DSP/*:
Sound setting/button *
BAND/0:
52
Select frequency range/
number button 0
53
Battery compartment
54
SEL/#:
Press or hold down to access
adjustment options/button #
55
TA/9:
Activate traffi c radio station/
number button 9
56
AF/8:
Alternative Frequency search/
regional programme activation/
number button 8
57
Number button 5
58
RDM/4:
Random playback in the CD/
MP3 operation mode/ number
button 4
59
RPT/2:
Repeat function in the CD/
MP3 operation mode/
number button 2
60
▸II/1:
Playback start or stop/
number button 1
61
MODE:
Set operation type/
Loudness function
62
Microphone unit plug
63
Microphone
64
TALK button
green LED for connection status
65
66
Case for face plate
67
Bezel frame
68
Installation bracket
69
Key for installation bracket
70
Fixture plate
(incl. securing material)
GB
Bluetooth Car Radio KH 2376
13
GB
Installation
WARNING
With the installation of the device damage can occur!
If possible have the device installed by a qualifi ed technician. ►
If you want to install the device yourself, for safe and fl awless operation ►
of the device follow the instructions for connection and installation.
Connection
IMPORTANT
The use of incorrect connections can lead to damage to the
device.
F
or installation use the device's ISO connections. The vehicle specifi c ISO ►
adapter that you may possibly require can be obtained from a specialist
establishment, from a local dealer or from the store's technical department.
When using other connection types the warranty becomes void!
Installation
Confi guration of the ISO connections
1 unconfi gured
2
1357
ISO A
2468
1357
ISO B
2468
3 unconfi gured
4 Permanent positive
5 Antenna power
6 unconfi gured
7 12 V (Ignition positive)
8 Minus (-)
1 Rear right +
2 R
3 Front right +
4 Front right 5 Front left +
6 Front left 7 Rear left +
8 Rear left -
Confi guration
unconfi
gured
Confi guration
ear right -
14
Bluetooth Car Radio KH 2376
Installation
To connect the device to two speakers use only the cables for the front speakers.
NOTICE
Make sure that a permanent positive connection is applied to the station ►
memory of connection 4 in the ISO block A.
In some automobile models the standard confi
[4] and [7] in ISO block A are interchanged at the factory. If this is the
case the station memory can be lost. To correct this, the connections 7
(Ignition positive) and 4 (Permanent positive) in the ISO Block A must be
swapped.
You can connect an external amplifi er to the audio cinch output. For this ►
follow the operating instructions for the external amplifi er.
Antenna power connection
IMPORTANT
Possible damage to the device!
Nev
er attach the antenna power connection with the antenna's motor ►
power cable.
GB
guration of the connections ►
The connection for the antenna power is available for a relay controlled antenna.
The relay then automatically extends the antenna when the device is switched
on. When switched off the antenna retracts. This connection can also be used to
control an external amplifi er. For exact connection information please consult the
amplifi er's operating instructions.
Connection of an external amplifi er
For the connection of an external amplifi er use the audio cinch output LINE
39
OUT
. For this follow the operating instructions for the external amplifi er.
Connecting the microphone unit
For connection of the microphone unit use the microphone unit socket 37.
Bluetooth Car Radio KH 2376
15
GB
A
Installation
Connection schematic
Antenna Bluetooth antenna
1 3
ISO B
ISO
External amplifi er
Microphone unit
Installation
The device can be installed into any standard ISO mounting duct. In the event that
your vehicle does not have an ISO mounting duct contact your local specialist
establishment, local dealer or the technical department of the store.
NOTICE
Before installation remove, without fail, the two transport securing screws ►
on the top of the housing (marked with a red sticker)!
Connect the cable before fi
plugged in properly and that the system functions correctly.
Installation instructions
Install the device in the duct provided for it or select the installation location so ■
that all buttons can be comfortably reached and the driver is not impeded.
Only connect the device to a properly installed 12 V automotive battery. ■
Only connect the device in the vehicle via an ISO plug. ■
Install the device in such a way as to avoid the development of heat accumu- ■
lation and so that the device is suffi ciently
nally installing the device. Make sure that it is ►
v
entilated.
16
Bluetooth Car Radio KH 2376
Installation
To avoid function disturbances the installation angle should be less than 30°. ■
Do not install the device in a location where it will be subjected to high ■
temperatures(i.e. direct sunlight or heating vents), heavy contamination and
strong vibr
In the event that changes to the vehicle are necessary contact your vehicle ■
dealer/qualifi ed radio installation facility.
ations.
Installing the device into the ISO duct
Pull the installation bracket
housing.
Place the installation bracket into the ISO mounting duct.
Bend the tabs on the installation bracket with a scr
is fi xed fi rmly into the mounting duct (see diagram).
68
and the bezel frame 67 from the device's
GB
w driver so that the bracket
e
Check to make sure that the bracket is securely fi xed.
Connect the ISO socket block of the device with the two ISO plugs on your
vehicle.
Connect the antenna cable from the v
on the device.
Feed the micr
microphone unit socket. Lay the cable in such a way that the microphone
unit can be secured later in the v
phone" on page 32.
Contingently connect the audio cinch cable of an external amplifi er to the
LINE OUT socke
ophone unit cable into the mounting duct and connect it to the
t 39 on the device.
ehicle antenna to the antenna socket
ehicle interior see chapter "Using the micro-
Bluetooth Car Radio KH 2376
17
GB
Installation
If necessary secure your device against theft with additional measures.
Attach the securing screw with the anchoring plate 70 and the securing material
to the engine fi rewall of the vehicle.
Carefully push the device into the mounting duct until it locks into place.
After all connections have been made activate the RESET button with a ball
point pen or other pointed object.
Attach the face plate as described under "Installing the face plate".
IMPORTANT
Possible damage to the cable!
Observ
as to avoid damaging it.
Finally put on the bez
e the position of the cable when sliding the device into the duct so ►
Uninstalling the device
To remove the installed device proceed as follows:
Remove the bezel frame
Insert the right and left keys
device. (The tabs are now bent back.)
Pull the device out.
el frame.
67
.
69
into their respective slots on the sides of the
18
Bluetooth Car Radio KH 2376
Initial operation
Initial operation
Face plate
To protect against theft you can remove the face plate from your device. Do not
store the removed face plate in your vehicle.
NOTICE
When the face plate is not inserted into the frame the theft protection ►
30
LED
To safeguard the face plate always keep it stored in its case. ►
Installing the face plate
Place the face plate with the left side in the
frame fi rst.
Then fi rmly press the right side until it locks into
place.
on the device blinks.
GB
Check to make sur
correctely installed in the frame. If the face plate is
incorrectly installed it can result in malfunctions when
operating the device.
e that the face plate is fi rmly and
Removing the face plate
Press the
Tilt the face plate completely forward.
Slide the face plate to the left and then pull fi rst
the right and then the left side away.
10
button to unlock the face plate.
Bluetooth Car Radio KH 2376
19
GB
Remote control
Inserting the battery
Remove the supplied battery from the packing.
To insert the battery and/or change the battery proceed
as follows:
Pull the battery compartment out of the remote control
by pressing the lateral locking device and at the same
time pull the batter
Remove the depleted battery and insert a new battery
of the type CR2025 (Button cell) into the battery compartment. Be sur
polarity.
Slide the battery compartment back into the remote
control.
Handling and operation
y compar
e to insert the battery with the correct
tment out.
Using the remote control
Point the remote control to the Infrared sensor
device.
NOTICE
You can use the remote control up to a distance of 8 m from the device. ►
Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
NOTICE
Most of the functions can be operated by the buttons on the device as well ►
as by the buttons on the remote control. In these instructions operation via
the buttons on the device is described. An
the remote control will be specifi cally highlighted.
23
on the front panel of the
y reference to the pushbuttons on
If no setting is made and/or no button pushed within approx. 5 seconds the ►
device returns to its previous operating mode. Changed settings are saved.
20
Bluetooth Car Radio KH 2376
Handling and operation
Switching On and Off
Press briefl y the POWER/DIM button to switch the device on. In the display
the notice WELCOME appears.
Briefl y touch the POWER/DIM button to dim the display illumination.
GB
To switch off
hold down the POWER/DIM button longer.
Settings
WARNING
Hearing damage as a result of too high a volume!
If the volume is set too high it can lead to permanent hearing damage.
Set the volume to moderate levels only. ►
Volume
Turn the multi controller to set the volume.
Bass/Treble/Balance/Fader
Press the SEL button. The current volume level is shown. Each further press of
the SEL button accesses the next setting point.
The following settings are possible:
VOL - Volume (from 0 to 45),
BAS - Bass (from -7 to +7),
TRE - Treble (from -7 to +7)
BAL - Balance (sound distribution between the right and left speakers)
(from 8L to 8R)
FAD - Fader (sound distribution between the rear and front speakers)
(from 8R to 8F)
Turn the multi controller to change the settings of the displayed menu items.
further settings with the SEL button
Hold down the SEL button for approx. 2 seconds and then press the SEL
button repeatedly until the desired function is shown in the display.
INVOL - switch on volume
Turn the multi controller to set the volume level, with which the device is to be
set when turned on.
Bluetooth Car Radio KH 2376
21
ADJ - Time of day
Handling and operation
GB
NOTICE
The device is equipped with an RDS controlled clock. The clock sets itself ►
automatically when the EON function is switched on and also continues to
run when the radio is switched off
can also set the time of day manually.
Turn the multi controller to the right to set the hours and to the left to set the
minutes.
TA
VOL - Volume for traffi c radio
Turn the multi controller to set the volume level, with which traffi c reports are
to be played back.
EON - Inf
When the EON function is switched on the radio switches to traffi c radio or PTY
groups if the TA or PTY function has been activated.
REC - R
ormation from other stations
Turn the multi controller in order to switch the EON function on (EON ON)
or off (EON OFF).
ecording format
. If you do not receive any RDS signal you
Loudness
Turn the multi controller to set the record format for recording on SD/MMC
and/or USB data carriers, MP3 (MP3 data) or WMA (Window
Audio).
DSP - Equalizer (Digital Sound Processing)
Turn the multi controller to select one of the settings DSP CLASSIC, DSP
K, DSP POP, DSP FLAT or DSP NONE. In the setting DSP NONE
ROC
no DSP is switched on. The DSP equalizer setting is shown at the bottom of
the display.
You can also set the equalizer by pressing the DSP button on the remote control.
With this setting DSP is switched off when the radio frequency is shown again.
Hold down the MD/LD button to switch the loudness function on or off .
s Media
22
Bluetooth Car Radio KH 2376
Handling and operation
Operating mode
Press the MD/LD button to switch between radio reception (frequency in-
dicator), CD/MP3 operation (CD), card slot (SD/MMC), USB port (USB)
and audio input (AUX).
NOTICE
The operating modes CD, SD/MMC and USB can only be accessed when ►
the corresponding medium is inserted.
Display
Press repeatedly the DISP button to display successively the following
information:
Radio station, title + interpret, time of day (will automatically be set with RDS reception), PTY settings (these RDS functions are transmitted by the broadcast institutions in various formats; see also the chapter "Radio functions") and frequencies.
GB
NOTICE
When you are not receiving any RDS or PTY information, "PS NONE“ or ►
"PTY NONE“ is shown in the display.
Radio reset (RESET)
To reset the device to its factory default settings, press the RESET button with a
pointed object, such as a pen.
Reset the device:
when operating for the fi rst time, ▯
after the cable connection, ▯
if not all function buttons are working ▯
when an error message appears in the display. ▯
Radio functions
Select frequency range
Press the BND/ENT button to switch between USW (FM1, FM2, FM3)
and medium wave (MW1, MW2).
Automatic station search
Press briefl y the buttons I◂◂ or ▸▸I to start a station search. The search will
stop when a station is found.
Bluetooth Car Radio KH 2376
23
GB
Handling and operation
Manual station selection
Hold down one of the buttons I◂◂ or ▸▸I for two seconds. MANUAL ap-
pears in the display.
Now press the buttons I◂◂ or ▸▸I to change the frequency in steps of
0,05 MHz (USW) and/or 9 kHz (MW) until the desired frequency is set.
If no button is pr
again. AUTO appears in the display..
essed for appr
Saving radio stations
For each frequency range 6 stations can be saved.
Hold down for approx. 3 seconds one of the station buttons 1 to 6 to save
the curr
off of the tone.
ently set station. Successful saving is indicated by a brief switching
Accessing saved stations
Select with BND/ENT the frequency range.
Press one of the station buttons 1 to 6, to access the saved station.
Automatic saving
Hold down the A/PS button for 3 seconds. A search immediately starts
whereby each found station remains for approx. fi ve seconds. The station indicator and/or the station frequency blinks and the memory cell is displayed.
With weak stations the search will automatically continue.
ox. two seconds the automatic station search is set
Running through saved stations
Press briefl y the A/PS button. All stations will be briefl y selected.
When you hear the desired station press briefl y the A/PS button. The chosen
station remains selected.
Alternative Frequency (AF)
You can search for alternative frequencies of a station so that it will always have
optimal reception.
Press the AF button. The display show
for the optimal frequency of the currently selected station.
s AF. The device then always searches
24
Bluetooth Car Radio KH 2376
Handling and operation
Regional programmes
A few stations broadcast regional programmes.
In order to playback only the station's regional programme hold down the AF
button until the notice REG ON appears in the display
To again playback the national programme hold down the AF button until
the notice REG OFF appears in the display
Programme mode (PTY)
With the help of this function you can search for stations in a designated genre.
The following settings are possible:
GB
.
.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
NOTICE
Please note that this information is dependent on the region, the broadcas- ►
ting corporation and the station.
► EON function must be switched on.
For this function the
Switc
With the station search only stations of the currently selected PTY identifi cation will
be considered.
hing the PTY function on/off
To activate the PTY search press the PTY button. In the display the notice
appears.
PTY
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
To deactivate the PTY search press the PTY button again.
Setting the PT
Hold down the PTY button and then turn the multi controller to set the in-
dividual PT
Station search by PTY identifi cation
During the display of a PTY identifi cation if you press briefl y the PTY button
or the buttons I◂◂ and/or ▸▸I a search immediately star
correspond to this PTY identifi cation.
Bluetooth Car Radio KH 2376
Y identifi cation
Y identifi cation.
ts for stations, which
25
GB
Handling and operation
If no station is found that corresponds to this PTY identifi cation the notice NOT FND
appears briefl y and then the search ends with the last set station.
Traffi c radio (TA - "Traffi c Announcement")
For this function the EON function must be switched on.
Press the TA button to switch this mode on or off
In the TA mode the device will immediately switch from other stations or operation
modes to the radio station, which is currently broadcasting traffi c information. With
this the volume level entered under TAVOL will be set.
During the playback of traffi c radio press the TA button to stop the TA function
without switching off this function.
.
General CD functions
NOTICE
Dampness and high humidity can cause the CD player to malfunction. In ►
this case switch on the vehicle heating to dissipate the dampness before
using the device. Do not subject the de
temperatures.
Anti-Shock function (ESP - "Electric Shock Protection")
The device is equipped with an anti shock function. This function serves to compensate for vibrations, for example on uneven streets, and to provide an uninterrupted playback even with device movement. When the device is switched on the
memory automatically fi lls with data:
vice to any extreemly high or low
with audio CDs for 10 seconds; ■
with MP3-CDs for 120 seconds. ■
Inserting and removing CDs
fold the face plate downward by pressing the face plate's unlocking device.
Push the CD into the CD slot with the inscribed side facing up.
Lock the face plate back into place by folding it upwards. Playback of the CD
begins. T
o remove the CD open the face plate again. Press the OPEN button. The
T
CD will be ejected. The device switches to r
26
OC READ appears in the display (Read directory contents).
adio mode.
Bluetooth Car Radio KH 2376
Loading...