Silvercrest KH 2130-06-09-V3 User Manual
6
RADIO SET
KH 2130
KOMPERNASS GMBH
BURGSTRASSE 21 ⋅ D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH 2130-06/09-V3
Radio Set
Operating instructions
KH 2130
Konformitätserklärung gemäß dem Gesetz über Funkanlagen und
Telekommunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE)
Declaration of Conformity in accordarice with the Radio and Telecommunications Terminal Equipment Act
(FTEG) and Directive 1999/5/EC (R&TTE Directive)
Hersteller / Verantwortliche Person
Manufacturer / responsible person
erklärt, dass das Produkt
declares that the product
Type (ggf. Anlagenkonfiguration mit Angabe der Module):
Type (if applicable, configuration including the modules)
Telekommunikations(Tk-)endeinrichtung
Telecommunicätions ternlinal equiprrient
Verwendungszweck / lntended purpose
bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des § 3 und den übrigen
einschlägigen Bestimmungen des FTEG (Artikel 3 der R&TTE) entspricht.
complies with the essential requirements of §3 and the other relevant provisions of the FTEG
(Article 3 of the R&TTE Directive), when used for its intended purpose.
Kompernaß GmbH
Burgstraße 21
44867 Bochum
Funkübertragungs-Set
Radio Transmission Set
KH 2130
5 Funkanlage
Radio equipment
Übertragung von Audio und Video Signalen
Transmission of audio and video signals
Gesundheit und Sicherheit gemäß § 3 (1) 1. (Artikel 3 (1) a))
Health and safety requirements pursuant to § 3 (1) 1. (Article 3 (1) a))
angewendete harmonisierte Normen
Harmonised Standards applied
EN 60065: 2002 + A1: 2006
Schutzanforderungen in Bezug auf die elektromagnetische Verträglichkeit
(§ 3 (1) 2, Artikel 3 (1) b)
Protection requirements concerning electromagnetic compatibility § 3(1)(2), (Article 3(1) b))
angewendete harmonisierte Normen
Harmonised Standards applied
EN 301 489-1 V1.6.1
EN 301 489-3 V1.4.1
Maßnahmen zur effizienten Nutzung des Funkfrequenzspektrums
Measures for the efficient use of the radio frequency spectrum
5 Luftschnittstelle bei Funkanlagen gemäß § 3(2) (Artikel 3(2)
Air interface of the radio systems pursuant to § 3(2) (Article 3(2)
Angewendete harmonisierte Normen
Harmonised standards applied
Bochum, 29.07.2009
Hans Kompernaß
Geschäftsführer
EN 300 220-3 V1.1.1
EN 300 440-2 V1.1.2
CONTENT PAGE
Intended Use 2
Contents 2
Technical data 3
Safety instructions 3
The device components 6
Putting the device into use 6
Connecting the transmitter 6
Connecting the receiver 8
Switching on 8
Improving the transmission quality 9
Channel configuration (parallel operation) 9
Expansion options 9
Cleaning 9
Troubleshooting 9
Disposal 10
Importer 10
Important warranty information 11
Read these operating instructions carefully before using the device for the first time
and preserve this booklet for later reference. Pass this booklet on to whoever might
acquire the device at a future date.
- 1 -
Intended Use
Contents
The device inintended exclusively for
private, non-commercial use. The radio
transmission set is suitable for audio and
video equipment, such as:
Televisions•
SAT receiver/set top boxes•
DVD/CD players•
PCs•
etc.•
The equipment must have the appropriate
AV inputs/outputs. The radio transmission
set is intended for:
Wireless transmission of audio, video •
and infrared signals:
(Transmission distances outdoors are
possible up to approx. 100 metres!).
No warranty is provided for damages
resulting from improper use of the device!
1 Radio transmission set (1 x transmitter,
1 x receiver)
2 Wall plug transformers
(9 V
1 SCART—CINCH adapter IN
1 SCART—CINCH adapter OUT
2 CINCH—Jacks 3,5 mm cable, 3 core
1 CINCH—CINCH cable, 3 core
1 Infrared cable (infrared transmission
diode cable for the remote control
signals to be transmitted)
3 Adhesive pads for the infrared
transmitter diodes
1 AUDIO adapter 3,5 mm stereo jack
on CINCH sockets
1 Operating manual
/300 mA)
- 2 -
Technical data
Safety instructions
Power supply:
Transmitter 9 V
Receiver 9 V
Manufacturer HON-KWANG
ELECTRIC CO., LTD
Model number: HKA-0930EC-230K
Input:
35 mA, 9 W
Output : 9 V
Protection class: II /
Transmitter connections:
• 9 V
• 2 x Audio/Video IN (jacks 3,5 mm)
• 1 x TV output (jack 3,5 mm)
• Infrared socket (IR)
Receiver connections:
• 9 V
• Audio R/L and Video OUT (CINCH)
Operating
temperature:
Humidity:
(no condensation)
Dimensions:
Transmitter/Receiver
unit: 135 x 55 x 145 mm
Weight :
• Receiver approx. 170 g
• Transmitter approx. 185 g
• Mains power adapter approx. 202 g
Video signal: 1 Vss
Audio signal: 1 Vss (type)
Transmission power: 10 mW
Open space range: up to 100 m
Within enclosed buildings or other locations, transmission disruptions (reflections)
may arise that strongly impair the image
and sound quality.
Supply voltage
Supply voltage
/ 300 mA
/ 300 mA
230 V ~/ 50 Hz,
, 300mA 2,7 VA
+5 ~ +35°C
5 ~ 90 %
Please read the following information •
carefully.
The operating manual must be stored •
safely and passed on to any future
owners of the radio transmission set.
Only use the product for the intended •
purpose as described in this operating
manual.
Risk of electric shocks!
Set up the radio transmission set out-•
side of the reach of children. Never
allow children to play with the radio
transmission set without supervision.
Children could attempt to insert foreign objects into the openings in the
device housing.
Only connect the devices to a socket with •
a mains voltage of 230 V ~ /50 Hz
using the supplied mains adapters.
Only plug the mains power adapter •
(wall plug transformer) in the designated 9 V
respective device.
Protect the device from moisture. Use •
it only in dry rooms, do not use it outdoors or close to liquids.
Make sure that neither the device nor •
the mains adapter becomes wet or
damp or sustains any other damage
during use.
When a storm and/or thunderstorm •
with the risk of lightening threatens,
disconnect the mains adapter from the
mains power.
Never allow any fluids to enter into the •
housings of the radio transmission sets.
Never submerse the device in water. •
Wipe it only with a slightly damp cloth.
connection socket of the
- 3 -
Loading...