Siemens TI 903 Instruction Manual
en Instruction manual ....................................................................... 6
fr Mode d’emploi ...........................................................................33
nl Gebruiksaanwijzing .................................................................... 62
pl Instrukcja obsługi ....................................................................... 91
cs Návod k použití ........................................................................ 120
ru ǪȋǻǽȃȆǻȊȉȆȗȂȉǽǻȈȃȚ ............................................................ 147
Fully automatic espresso machine
Machine à expresso automatique
Volautomatische espressomachine
Ekspres do kawy
Plně automatický kávovar
Автоматическая кофемашина
TI 903..
!
"
&
(1U«««)'« «
#
DMJDL
9
*
**
*** *7
*7
***
**
*
$
%
DMJDL
* ** ***
*
** ***
&
'
(
SUHVV
PD[
* **
*** *7
7
en
6
Table of contents
enInstruction manual
8 Intended use . . . . . . . . . . . . . . . . 7
( Important safety information . . . 7
7 Environmental protection . . . . . 9
Saving energy . . . . . . . . . . . . . . . . . . . 9
Environmentally-friendly disposal . . . . . 9
* Getting to know your appliance 9
Included in delivery . . . . . . . . . . . . . . . 9
Assembly and components . . . . . . . .10
Controls . . . . . . . . . . . . . . . . . . . . . . .10
_ Accessories. . . . . . . . . . . . . . . . 11
K Before using for the first time . 12
Installing and connecting the
appliance. . . . . . . . . . . . . . . . . . . . . .12
Commissioning the appliance . . . . . .12
1 Operating the appliance. . . . . . 14
Selecting a drink . . . . . . . . . . . . . . . .14
Preparing coffee using freshly ground
beans. . . . . . . . . . . . . . . . . . . . . . . . .15
Preparing coffee using ground coffee15
Preparing drinks with milk . . . . . . . . .16
Dispensing hot water . . . . . . . . . . . . .17
Adjusting beverage settings . . . . . . .17
Setting the grinding level . . . . . . . . . .18
P Customising . . . . . . . . . . . . . . . 19
Creating a user profile . . . . . . . . . . . .19
Editing or deleting user profile. . . . . .20
Saving individual drinks . . . . . . . . . . . 20
A Childproof lock . . . . . . . . . . . . . 20
Activating the child-proof lock . . . . . .20
Deactivating the child-proof lock . . . .20
Q Menu settings . . . . . . . . . . . . . . .21
Changing settings . . . . . . . . . . . . . . 21
Starting the "Water filter"or "frost
protection" programme. . . . . . . . . . . 22
D Daily care and cleaning . . . . . . .23
Cleaning agent . . . . . . . . . . . . . . . . . 23
Cleaning the appliance. . . . . . . . . . . 24
Cleaning the milk system . . . . . . . . . 25
Cleaning the brewing unit. . . . . . . . . 25
. Service programmes . . . . . . . . .26
Rinse milk system . . . . . . . . . . . . . . 27
Descaling . . . . . . . . . . . . . . . . . . . . . 27
Cleaning . . . . . . . . . . . . . . . . . . . . . . 28
calc’nClean. . . . . . . . . . . . . . . . . . . . 28
3 Trouble shooting . . . . . . . . . . . .29
4 Customer service . . . . . . . . . . . .32
Technical data . . . . . . . . . . . . . . . . . 32
E number and FD number. . . . . . . . 32
Guarantee . . . . . . . . . . . . . . . . . . . . 32
Intended use en
7
8 Intended use
Intended use
Check the appliance for
damage after unpacking it. Do
not connect the appliance if it
has been damaged in
transport.
This appliance is designed for
processing normal household
quantities in the home or similar
quantities in non-industrial
applications. Non-industrial
applications include, for
example, use in employee
kitchens in shops, offices,
agricultural and other
commercial businesses, as well
as use by guests in boarding
houses, small hotels and
similar dwellings.
Only use the appliance indoors
at room temperature and up to
2000 m above sea level.
( Important safety
information
Important safety information
Please read carefully, follow
and retain the operating
instructions. When passing on
the appliance, enclose these
instructions.
This appliance may be used by
children aged 8 or over and by
people who have reduced
physical, sensory or mental
abilities or inadequate
experience and/or knowledge,
provided they are supervised or
have been instructed on how to
use the appliance safely and
have understood the resulting
dangers. Children under 8
years of age must be kept away
from the appliance and the
power cord and must not
operate the appliance. Children
must not play with the
appliance. Cleaning and user
maintenance may not be
carried out by children, unless
they are aged 8 years or older
and are supervised.
:Warning
Risk of electric shock!
■ The appliance may only be
connected to a power supply
via a correctly installed
socket with earthing. Ensure
that the protective conductor
system of the domestic
electricity supply has been
correctly installed.
Risk of electric shock!
en Important safety information
8
■ Connect and operate the
appliance only in
accordance with the
specifications on the rating
plate. If the power cord of
this appliance is damaged, it
must be replaced by
customer service.
Risk of electric shock!
■ Do not use if the power
cable or appliance is
damaged. If a fault occurs,
pull the mains plug or switch
off the mains voltage
immediately.
Risk of electric shock!
■ To prevent hazards, the
appliance may be repaired
by our customer service
only.
Risk of electric shock!
■ Never immerse the
appliance or mains cord in
water.
:Warning
Hazard due to magnetism!
The appliance contains
permanent magnets which may
affect electronic implants, e.g.
heart pacemakers or insulin
pumps. Persons wearing
electronic implants must
maintain a minimum distance of
10 cm from the appliance and
from the following parts upon
removal: milk container, milk
system, water tank and brewing
unit.
:Warning
Risk of suffocation!
Do not let children play with
packaging material. Store small
parts safely as they can be
easily swallowed.
:Warning
Risk of burns!
■ The milk system becomes
very hot. After use, allow it to
cool down first before
touching it.
Risk of burns!
■ After use, surfaces such as
the cup warmer may still be
hot for a certain period.
:Warning
Risk of injury!
■ Improper use of this
appliance may result in
injury.
Risk of injury!
■ Do not reach into the
grinding unit.
Environmental protection en
9
7 Environmental
protection
Environmental protection
Saving energy
■ If the appliance is not being used,
switch it off.
■ Set the interval for automatic
switch-off to the smallest value.
■ If possible, do not interrupt coffee or
milk froth dispensing. Stopping a
process prematurely results in
higher energy consumption and the
drip tray fills up more quickly.
■ Descale the appliance regularly to
avoid a build-up of limescale.
Limescale residue results in higher
energy consumption.
Environmentally-friendly
disposal
Dispose of packaging in an
environmentally-friendly manner.
Please ask your dealer about current
disposal routes.
* Getting to know your
appliance
Getting to know your appliance
This section provides an overview of the
scope of delivery, the assembly and the
components of your appliance. It also
introduces you to the different controls.
Note: Depending on the appliance
model, individual details and colours
may differ.
How to use these instructions:
The cover pages of the operating
instructions can be folded out towards
the front. The illustrations are identified
using numbers that are referred to in the
operating instructions.
Example: ~ Fig. !
Included in delivery
~ Fig. !
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE). The
guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.
# Fully automatic coffee machine
+ Milk container (container, lid, riser,
connection hose)
3 Measuring spoon
; Water hardness testing strip
C Operating instructions
en Getting to know your appliance
10
Assembly and components
~ Fig. "
Controls
( Display
0 Control panel
8 Rotary selector/start- stop
(rotate and press to navigate)
@ Outlet system (coffee, milk, hot
water), height adjustable
H Milk container (container, lid, riser,
connection hose)
P Drip tray (coffee grounds
container, drip plate)
h Rating plate
X Brewing chamber cover
` Water tank
)" Recessed grip on water tank
)* Grind compartment (ground
coffee/cleaning tablet)
)2 Rotary selector for grinding level
setting
): Aroma lid
)B Bean container
Button Meaning
on/off Switches the appliance on and off
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■ it is still warm when switched on, or
■ coffee was not dispensed before the appliance was switched off.
The appliance is ready for use when the symbols for drink selection and the on/off button
light up on the display.
! Customising
The appliance provides the option of saving and calling up customised settings for coffee
drinks. ~ "Customising" on page 19
" Coffee strength
Adjusting the coffee strength. ~ "Adjusting beverage settings" on page 17
milk Briefly press:
Setting for share of milk in the drink in %
As a drink or as an ingredient in certain coffee drinks. ~ "Adjusting beverage settings"
on page 17
Press and hold for at least 4 seconds:
Child-proof lock ~ "Childproof lock" on page 20
ml Drink quantity in millilitres. ~ "Adjusting beverage settings" on page 17
# Two drinks
Preparation of two drinks simultaneously. Position cups next to one another under the cof-
fee dispenser. ~ "Adjusting beverage settings" on page 17
$/± Menu settings/service programmes
Briefly press the $/± button in order to call up the menu settings and service pro-
grammes. Briefly press the $/± button again to return to the drink selection. If no selec-
tion is made within approx. 10 seconds, the appliance will automatically return to the drink
selection.
Note: Press and hold the $/± button for at least 5 seconds to call up the menu settings
directly.
Accessories en
11
--------
Display
The display ( shows the selected
drinks, settings and setting options, as
well as messages about the appliance’s
operating status.
Additional information is shown in the
display; this is hidden after a short
period of time or once the information is
confirmed by pressing a button.
The display also prompts the user to
perform certain actions.
The individual steps for performing the
action are shown in the display.
If the action required was carried out,
e.g. "Fill water tank", the corresponding
message will disappear.
Rotary selector
The rotary selector 8 has a range of
different functions.
■ Rotation: navigate in the display and
change settings.
■ Pressing: start beverage preparation
or service programme, confirm
menu selection.
■ Pressing while drink is being
dispensed: prematurely stop
dispensing.
_ Accessories
Accessories
The following accessories are available
from retailers or from customer service:
--------
The contact data for customer service in
all countries can be found at the back of
these instructions.
Navigation buttons
For navigating in the display.
Accessory Order number
Retail Customer ser-
vice
Cleaning tablets TZ80001 00311807
Descaling tablets TZ80002 00576693
Water filter TZ70003 00575491
Care set TZ80004 00576330
Adapter for milk con-
tainers
TZ90008 00577862
en Before using for the first time
12
K Before using for the
first time
Before using for the first time
In this section, you will learn how to
commission your appliance. Before you
can use your new appliance, you must
make some settings.
Note: Only use the appliance in
frost-free areas. If the appliance was
transported or stored at temperatures
below 0 °C, you must wait for at least 3
hours before using it.
Installing and connecting the
appliance
1. Remove any protective plastic film.
2. Place the appliance on a level,
water-resistant surface which can
bear the weight.
3. Using the mains plug, connect the
appliance to an earthed socket that
has been correctly installed.
Commissioning the appliance
Setting the language
Notes
■ The language selection appears
automatically when the appliance is
switched on for the first time.
■ You can change the language at any
time. ~ "Menu settings"
on page 21
1. Switch on the appliance with the
on/off button.
The preset language appears in the
display.
2. Use the rotary selector to select the
desired display language.
3. Confirm with the right navigation
button.
The setting has been saved.
Setting the water hardness
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling
programme should be run. The preset
water hardness is level 4.
You can check the water hardness
using the enclosed test strip or by
asking your local water supplier.
1. Briefly immerse the enclosed test
strip in fresh tap water, leave it to
drip off and read off the result after 1
minute.
2. Use the rotary selector to set the
water hardness determined.
3. Confirm with the right navigation
button.
The "Fill bean container" reminder lights
up briefly.
4. Either confirm with the right
navigation button or wait a few
seconds.
Notes
■ When the appliance is used for the
first time after running a service
program, or if it has not been
operated for a long period, the first
beverage will not have the full aroma
and should not be consumed.
■ After commissioning the appliance,
you will achieve a suitably thick and
stable "crema" only after the first few
cups have been dispensed.
■ If the appliance is in use for a long
period of time, water droplets will
form on the ventilation slots. This is
normal.
Before using for the first time en
13
The table shows the allocation of the
levels to the different degrees of water
hardness:
Subsequent changes to the water
hardness can be made at any time.
~ "Menu settings" on page 21
Filling the bean container
This appliance can be used to prepare
coffee drinks from coffee beans or
ground coffee (not instant coffee).
1. Open the lid ): of the bean
container )B.
2. Pour in the beans.
3. Close the lid again.
Notes
■ The coffee beans are freshly ground
for each brewing.
■ The coffee beans must be sealed
and stored in a cool place to retain
optimum quality.
■ Coffee beans can be stored in the
bean container for a number of days
without losing their aroma. Always
add the ground coffee first prior to
beverage preparation. ~ "Preparing
coffee using ground coffee"
on page 15
Filling the water tank
Important: Fill the water tank with fresh,
cold, still water on a daily basis. Prior to
operation, check whether the water tank
has been sufficiently filled.
1. Hold the recessed grip )" on the
side of the water tank `and gently
tilt out the water tank to the side.
2. Use the handle to remove the water
tank.
3. Insert the water filter. ~ "Inserting
or replacing a water filter"
on page 22
Note: The water filter is not included
in product package.
~ "Accessories" on page 11
4. Fill the water tank with water up to
the "max" marking.
5. Re-insert the water tank into the
holder and tilt back to the starting
position.
The brand logo lights up in the display.
The appliance heats up and rinses.
Some water will run out of the outlet
system.
The appliance is ready for use when the
symbols for the beverages and the
on/off button light up on the display.
Level Degree of water hardness
German (°dH) French (°fH)
1 1-7 1-13
2 8-14 14-25
3 15-21 26-38
4 22-30 39-54
en Operating the appliance
14
1 Operating the
appliance
Operating the appliance
In this section, you will learn how to
prepare your appliance for beverage
preparation and how to prepare hot
drinks. It features information on
adjusting the beverage settings and
adjusting the grinding level.
Selecting a drink
■ Use the rotary selector to select the
desired drink.
■ The display shows the name of the
drink and the currently active values
(e.g. strength or cup size).
■ The drink selected can be prepared
with the pre-set values or first
adjusted to individual taste.
~ "Adjusting beverage settings"
on page 17
■ If no controls are activated within
approx. 5 seconds, the appliance
will exit settings mode. The settings
made will be automatically stored.
You can choose from the following
drinks:
--------
Note: For a number of settings, coffee
is prepared in two steps
("aromaDoubleShot"). Wait until the
procedure is fully completed.
Espresso Macchiato
Ristretto
Espresso
Espresso Doppio
Coffee
Cappuccino
Latte Macchiato
Caffe Latte
Milk froth
Warm milk
Hot water
Operating the appliance en
15
Preparing coffee using freshly
ground beans
You can choose between Ristretto,
Espresso Doppio, Espresso and Coffee.
The preparation of coffee drinks with
milk is explained in a separate section.
~ "Preparing drinks with milk"
on page 16
The appliance is switched on. The water
tank and bean container have been
filled.
1. Place a cup under the outlet system.
2. Use the rotary selector to select the
desired drink.
The name of the drink and the currently
active values are shown on the display.
3. To change the settings for the
selected drink
~ "Adjusting beverage settings"
on page 17
4. To begin dispensing the drink, press
the rotary selector.
The coffee is brewed and then
dispensed into the cup.
Note: To prematurely stop dispensing
the drink, press the rotary selector
again.
Preparing coffee using ground
coffee
You can also operate this appliance
using ground coffee. Do not use instant
coffee. The preparation of coffee drinks
with milk is explained in a separate
section. ~ "Preparing drinks with milk"
on page 16
The appliance is switched on. The water
tank has been filled.
1. Place a cup under the outlet system.
2. Use the rotary selector to select the
desired drink.
3. Press the " button.
4. Use the rotary selector to select
"Ground coffee".
5. Press the " button.
6. Remove the aroma lid ): of the
bean container )B and open the
grounds compartment )*.
7. Add the ground coffee; do not press
firmly. Add no more than two level
measuring spoons.
Caution!
Do not place coffee beans or instant
coffee in the grounds compartment.
8. Close the grounds compartment and
the aroma lid.
The name of the drink and the currently
active values are shown on the display.
9. To change the settings for the
selected drink
~ "Adjusting beverage settings"
on page 17
10. To begin dispensing the drink, press
the rotary selector.
The coffee is brewed and then
dispensed into the cup.
Notes
■ Any grounds residue in the grounds
shaft should be directed down the
shaft using a soft brush.
■ To prematurely stop dispensing the
drink, press the rotary selector
again.
■ For another drink with ground coffee,
repeat the procedure.
■ When ground coffee is used, the
aromaDoubleShot function is not
available.
en Operating the appliance
16
Preparing drinks with milk
This appliance features an integrated
milk system. The milk system can be
used to prepare coffee drinks with milk,
as well as milk froth and warm milk.
You can choose between Espresso
Macchiato, Cappuccino,
Latte Macchiato and Caffe Latte.
Notes
■ While milk is being prepared, you
may hear a whistling sound. These
noises are emitted for technical
reasons and are normal.
■ Dried milk residues are difficult to
remove, therefore always perform
cleaning. ~ "Cleaning the milk
system" on page 25
:Warning
Risk of burns!
The milk system becomes very hot.
After use, always let it cool down before
you touch it.
Using the milk container
The milk container H has been
designed especially for use together
with this appliance. It is intended solely
for use in the household and for storing
milk in the refrigerator.
Important: The milk container can only
be connected if the milk system is
installed in the outlet system with an
adapter and hose. (~ Fig. #)
1. To remove the lid, press the marking
and remove the lid. (~ Fig. ')
2. Pour in the milk.
3. Press the lid onto the milk container
until it engages.
4. Connect the milk container on the
left of the appliance. The milk
container must engage.
Coffee drinks with milk
The appliance is switched on. The water
tank and bean container have been
filled.
The milk container filled with milk is
connected.
1. Place a cup or a glass under the
outlet system.
2. Use the rotary selector to select the
desired drink.
The name of the drink and the currently
active values are shown on the display.
3. To change the settings for the
selected drink
~ "Adjusting beverage settings"
on page 17
4. To begin dispensing the drink, press
the rotary selector.
The milk is dispensed into the cup or
glass first. The coffee is then brewed
and dispensed into the cup or the glass.
Note: Pressing the rotary selector once
can prematurely stop the dispensing of
milk or coffee; pressing the rotary
selector twice stops the drink
dispensing completely.
Milk froth or warm milk
The appliance is switched on. The water
tank has been filled.
The milk container filled with milk is
connected.
1. Place a cup or a glass under the
outlet system.
2. Select "Milk froth" or "Warm milk"
with the rotary selector.
The name of the drink and the currently
active values are shown on the display.
3. To change the settings for the
selected drink
~ "Adjusting beverage settings"
on page 17
Operating the appliance en
17
4. To begin dispensing the drink, press
the rotary selector.
Milk froth or warm milk is dispensed
into the cup or glass.
Note: To prematurely stop dispensing
the drink, press the rotary selector
again.
Dispensing hot water
Note: Before dispensing hot water,
clean the milk system and remove the
milk container. If the milk system is not
cleaned, the dispensed water may
contain small quantities of milk.
~ "Cleaning the milk system"
on page 25
:Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
The appliance is switched on. The water
tank has been filled.
1. Place a cup under the outlet system.
2. Remove the milk container, if
connected.
3. Select "Hot water" with the rotary
selector.
4. To change the settings for the
selected drink
~ "Adjusting beverage settings"
on page 17
5. To begin dispensing the drink, press
the rotary selector.
Hot water is dispensed into the cup.
Note: To prematurely stop dispensing
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
1. Press the " button.
2. Use the rotary selector to set the
coffee strength or select ground
coffee.
3. Press the "button or the rotary
selector to confirm.
Button Function Selection
" Selecting the coffee
strength, ground coffee
■ very mild
■ mild
■ normal
■ high
■ very strong
■ aromaDoubleShot strong
■ aromaDoubleShot strong +
■ Ground coffee
milk Milk/coffee mixing ratio Setting share of milk in %
(only for coffee drinks with milk)
ml Cup size Adjustment of the volume in ml increments.
Not available for ristretto.
# 2 cups at once Place 2 cups under the outlet.
en Operating the appliance
18
aromaDoubleShot function
The longer the coffee is brewed, the
more bitter substances and undesired
aromas are released. This has a
negative effect on the taste and makes
the coffee less easily digestible. For
extra strong coffee, the appliance
therefore has a special
aromaDoubleShot function. When half
the volume has been prepared, a
second portion of coffee beans is
ground and a second brew made so
that in each case only the pleasant and
beneficial flavours and aromas are
released.
Note: The aromaDoubleShot function
can be selected for all coffee drinks
except for:
■ drinks with a small volume of coffee,
e.g. ristretto
■ a small volume of coffee, e.g. setting
a 200 ml "Caffe Latte" with a 90%
share of milk (10% share of coffee)
■ preparation with ground coffee
■ Dispensing two cups
Adjusting the milk/coffee mixing ratio
A coffee drink with milk is selected.
1. Press the milk button.
2. Use the rotary selector to set the
share of milk in %.
Example: When a value of 30% is
configured, 30% milk and 70%
coffee will be dispensed.
3. Press the milkbutton or the rotary
selector to confirm.
Selecting cup size
A drink is selected.
1. Press the ml button. The preset
volume depends on the type of
beverage.
2. Use the rotary selector to adjust the
desired volume in ml increments.
3. Press the mlbutton or the rotary
selector to confirm.
Notes
■ The volume cannot be changed for
ristretto.
■ The volume dispensed can fluctuate
depending on the quality of the milk.
Preparing two cups at once
A coffee drink or a coffee drink with milk
is selected.
1. Press the # button.
2. Place two pre-heated cups on the
left and right below the outlet
system.
3. To begin dispensing the drink, press
the rotary selector.
The selected drink will be brewed and
will then be dispensed into the two
cups.
Notes
■ The drink is prepared in two steps
(two grinding operations). Please
wait until the process is fully
completed.
■ The aromaDoubleShot function is
not possible in the # selection.
Setting the grinding level
This appliance features an adjustable
grinder. This enables the grinding level
of the coffee to be individually changed.
:Warning
Risk of injury!
Do not reach into the grinding unit.
Caution!
The appliance may be damaged! Only
adjust the grinding level when the
grinder is running!
Customising en
19
When the grinder is in operation, use
the rotary selector )2 to set the
grinding level.
■ Finer grinding level: turn
anticlockwise. (Fig. a)
■ Coarser grinding level: turn
clockwise. (Fig. b)
Notes
■ The new setting will not become
apparent until the second cup of
coffee.
■ For dark roast coffee beans, choose
a finer grinding level; for lighter
beans, choose a coarser grinding
level.
P Customising
Customising
User profiles can be created in the
customising menu. In the user profiles,
individual beverages can be stored
under names of your choice.
Creating a user profile
1. Press the ! button. The menu
appears.
2. Use the rotary selector to select a
new profile.
3. Press the right navigation button to
confirm the selection.
4. Use the rotary selector to select a
background picture.
5. Press the right navigation button to
confirm the selection.
The user name can be entered.
6. Use the rotary selector to select the
desired letters. Press the rotary
selector to confirm the letters.
The letter is saved.
Once the user name has been fully
entered:
7. Press the right navigation button to
save the user name.
8. Press the right navigation button
again to save the profile.
The user profile picture appears.
An individual beverage can then be
saved immediately for the user created.
Saving individual beverages:
1. Press the rotary selector.
The display "change beverages"
appears.
2. Press the right navigation button to
save the profile.
3. Use the rotary selector to select the
desired beverage.
The selected beverage can be adjusted
in line with personal preference.
~ "Adjusting beverage settings"
on page 17
D E
en Childproof lock
20
4. Press the rotary selector.
A prompt appears for you to confirm
the selection.
5. Press the right navigation button to
confirm the selection.
6. Press the ! button.
The settings are completed.
The appliance is ready for use again.
Note: Up to 10 personal beverages
can be saved in one profile.
Editing or deleting user profile
1. Press the ! button. The menu
appears.
2. Use the rotary selector to select the
desired profile.
3. Press the left navigation button to
delete the profile.
- or -
Press the right navigation button to
edit the settings in the profile.
The settings in the profile can be
changed as described. ~ "Creating a
user profile" on page 19
4. Press the ! button.
The appliance is ready for use again.
Saving individual drinks
A drink that is currently being dispensed
can be saved directly in a new or
existing profile using the individual
settings.
1. Press and hold the ! button for at
least 5 seconds.
If no profiles have yet been saved, a
new profile appears automatically.
2. If profiles are already saved and if
the individual drink should be saved
in a new profile, use the rotary
selector to select a new profile.
- or -
If the individual drink should be
saved in an existing profile, use the
rotary selector to select the desired
profile.
3. Press the rotary selector to confirm
the selection.
If a new profile is created, enter name
and select background picture. Confirm
the entries.
If a profile is already available, select
this and save the drink.
4. Press the ! button.
The appliance is ready for use again.
Note: To exit the menu automatically,
set "Leave profiles automatically" under
"User profiles". ~ "Menu settings"
on page 21
A Childproof lock
Childproof lock
The appliance can be locked to protect
children against scalding and burns.
Activating the child-proof lock
Press and hold the milk button for at
least 4 seconds.
"Child-proof lock activated" appears in
the display.
It is no longer possible to operate the
appliance.
Deactivating the child-proof
lock
Press and hold the milk button for at
least 4 seconds.
"Child-proof lock deactivated" appears
in the display.
The appliance can be used in the usual
way.
Menu settings en
21
Q Menu settings
Menu settings
This menu is used for changing settings
individually, accessing information and
starting a programme.
Changing settings
1. Press and hold the $/± button for at
least 5 seconds to open the "Menu".
The different setting options will
appear in the display.
2. Make the desired setting using the
rotary selector.
The current setting is highlighted in
colour on the display.
3. Press the navigation button under
"select".
4. Use the rotary selector to change the
setting.
5. Press the navigation button under
"confirm".
The setting has been saved.
6. Press the $/± button to exit the
"Menu".
The drink selection appears on the
display.
Notes
■ You can switch to the previous level
by pressing the navigation button
under "back".
■ The setting procedure can be
aborted by pressing the navigation
button under "abort".
■ Press the $/± button to exit the
menu at any time.
■ If no entry is made within approx. 2
minutes, the menu closes
automatically and the settings are
not saved.
The following settings are available:
Settings Possible settings Explanation
Language Different languages Setting the language to be used for display texts.
Water hardness ■ 1 (soft)
■ 2 (medium)
■ 3 (hard)
■ 4 (very hard)
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness correctly, so that the appliance indicates accurately
when the descaling programme should be run.
Switch off after 15 minutes
up to
3 hours
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Brightness display Level 1 up to level 10
Standard setting 7
Setting that governs the brightness of the display
Beverage info Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Factory settings Appliance reset to factory set-
tings
Resets all your own settings to the condition
when delivered.
en Menu settings
22
--------
Starting the "Water filter"or
"frost protection" programme
1. Briefly press the $/±button.
2. The rotary selector can be used to
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
Note: The rotary selector can also be
used to select a service programme.
~ "Service programmes" on page 26
Water filter
A water filter lessens limescale
deposits, reduces impurities in water
and improves the taste of the coffee.
Water filters are available from retailers
or from customer service.
~ "Accessories" on page 11
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
1. Select "Water filter" in the menu
settings.
2. Use the navigation button to select
"insert" or "replace".
3. Use the measuring spoon to press
the water filter firmly into the empty
water tank.
4. Fill the water tank with water up to
the "max" marking.
5. Place a container with a capacity of
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
6. Subsequently empty the container.
The appliance is ready for use again.
Demo mode ■ on
■ off
For presentation purposes only. The setting "off"
must be activated for normal operation. The setting is only possible in the first 3 minutes after
switching on the appliance.
Beverage settings
Espresso / Coffeetemperature
■ normal
■ high
■ max.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Hot water temperature
■ > 70 °C
■ > 80 °C
■ > 85 °C
■ > 90 °C
■ > 97 °C
Setting the temperature for hot water.
The setting is effective for all preparation types.
Order coffee/milk ■ first milk
■ first coffee
Setting that governs whether milk or coffee
should be brewed and dispensed first. (Cappuccino)
Daily care and cleaning en
23
Notes
■ The rinsing of the filter automatically
activates the interval for the display
of the filter change. After this interval
or after 2 months at the latest, the
filter will no longer be effective. It
needs to be replaced for reasons of
hygiene and to prevent a build-up of
limescale (which could damage the
appliance).
■ If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the
existing filter should be rinsed before
the first time the appliance is used
again. To do this, simply dispense a
cup of hot water.
Removing the water filter
If a new water filter is not inserted, the
"Water filter" function must be
deactivated.
1. Select "Water filter" in the menu
settings.
2. Select and confirm the "remove"
setting.
3. Remove the water filter from the
water tank.
4. Re-insert the water tank.
The appliance is ready for use again.
Frost protection
A service programme to prevent frost
damage during transportation and
storage. This programme completely
empties the appliance. The appliance
must be ready for use.
1. Press the rotary selector to start the
programme.
2. Empty the water tank and re-insert it.
3. The appliance emits steam.
4. Empty the drip tray and thoroughly
clean the appliance.
The appliance can now be transported
or stored.
D Daily care and
cleaning
Daily care and cleaning
With good care and cleaning, your
appliance will remain fully functioning
for a long time to come. In this section,
you will learn how to correctly clean and
care for your appliance.
:Warning
Risk of electric shock!
Before cleaning the appliance, pull out
the mains plug. Never immerse the
appliance in water. Do not use a steam
cleaner.
Cleaning agent
Please observe the following
information to ensure that the different
surfaces are not damaged by using the
wrong type of cleaning agent.
Do not use:
■ Harsh or abrasive cleaning agents.
■ Any cleaning agents containing
alcohol or spirits.
■ Hard scouring pads or sponges.
Notes
■ New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel. Wash new sponge
cloths thoroughly before use.
■ Always remove any limescale,
residues of coffee or milk, cleaning
or descaling solution immediately.
This residue may cause corrosion to
form.
9
9
en Daily care and cleaning
24
Caution!
Not all of the appliance's components
can be cleaned in the dishwasher.
~ Fig. % - (
Cleaning the appliance
1. Wipe the outside of the appliance
with a soft, damp cloth.
2. Clean the display using a micro-fibre
cloth.
3. Any grounds residue in the grounds
shaft should be directed down the
shaft using a soft brush.
Notes
■ If the appliance is cold when
switched on, or if it is switched off
after dispensing coffee, it rinses
automatically. The system is
therefore self-cleaning.
■ If the appliance has not been used
for a prolonged period of time (e.g.
while you are on holiday), clean the
entire appliance thoroughly,
including the milk system and
brewing unit.
Cleaning the drip tray and the coffee
grounds container
~ Fig. %
Note: The drip tray and coffee grounds
container should be emptied and
cleaned every day in order to prevent
deposits.
1. Pull the drip tray with the coffee
grounds container forwards and out.
2. Remove the drip plate.
3. Empty and clean the drip tray and
coffee grounds container.
4. Wipe out the interior of the appliance
(intake trays).
Cleaning the milk container
~ Fig. '
Note: For reasons of hygiene, the milk
container should be cleaned regularly
1. Dismantle the milk container into its
individual parts.
2. Clean all parts of the milk container
or put them in the dishwasher.
Not dishwasher-safe:
Outlet system cover
Brewing chamber cover
Brewing unit
Water tank
Aroma lid
Dishwasher- safe:
max.
60°C
Drip plate
Drip tray
Coffee grounds container
Coffee grounds slider, red
Brewing unit cover, red
Measuring spoon
Milk system, all parts
Milk container, all parts
Daily care and cleaning en
25
Cleaning the milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
~ Fig. #, ~ Fig. &
Manually clean the milk system on a
weekly basis, or more frequently if
required. For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 27
Remove the milk system:
1. Remove the milk container from the
appliance.
2. Slide the outlet system to the bottom
position.
3. Press the unlocking mechanism at
the top right.
4. Fold the cover down towards the
front and remove.
5. Remove the milk system and
dismantle into individual parts.
6. Clean the individual parts with
detergent solution and a soft cloth.
7. Rinse all parts with clean water and
leave to dry.
Notes
■ All parts of the milk system can be
cleaned in the dishwasher.
Detergent residues in the milk
system must be thoroughly removed
following the rinsing process.
■ Important: The outlet system cover
is not dishwasher-safe.
Inserting the milk system:
1. Assemble the individual parts of the
milk system.
2. Insert the milk system into the cover.
3. Slide the outlet system to the bottom
position.
4. Position the cover at the bottom and
pivot it upwards until it engages.
Cleaning the brewing unit
~ Fig. $, ~ Fig. (
In addition to the automatic cleaning
programme, the brewing unit should be
removed regularly for cleaning.
Caution!
Clean the brewing unit without detergent
and do not put it in the dishwasher.
Remove the brewing unit:
1. Switch off the appliance.
2. Remove the water tank.
3. Slide both red locking sliders
towards one another and remove the
cover.
4. Remove, clean and dry the coffee
grounds slider (red) and the brewing
unit cover (red).
5. Slide the red lock to the right across
the brewing unit.
6. Carefully remove the brewing unit
and clean thoroughly under running
water.
7. Clean the interior of the appliance
thoroughly with a moist cloth,
removing any coffee residues.
8. Allow the brewing unit and the
interior of the appliance to dry.
Insert the brewing unit:
1. Push the brewing unit into the
appliance in the direction of the
arrow. The arrow is located on the
top of the brewing unit.
Position the brewing unit from
above, suspend on the guide rails
and push into the appliance.
2. Slide the red lock to the left across
the brewing unit.
3. Insert the coffee grounds slider (red)
and the brewing unit cover (red).
4. Insert the cover until it engages.
5. Insert the water tank.
en Service programmes
26
. Service programmes
Service programmes
Every so often – the exact frequency
depends on usage and water hardness
– one of the following messages will
appear in the display in place of the
coffee selection:
■ Rinse milk system
■ Run descaling program urgently!
■ Run cleaning program urgently!
■ Run calc'nClean program urgently!
The appliance should immediately be
cleaned or descaled using the
appropriate programme. Alternatively,
the two processes Descale and Clean
can be carried out together using the
calc’nClean function. Failure to carry out
the service programme according to the
instructions may damage the appliance.
You can also start the service
programmes at any time without having
to wait for a reminder to appear in the
display. Press the $/± button, select the
desired programme and run it.
Notes
■ Important: If descaling is not
performed on the appliance in good
time, then the following appears
“Descaling programme overdue.
Device will shortly be locked!”.
Immediately perform the descaling
process in accordance with the
instructions. If the appliance is
locked, it can only be operated
again once the descaling process
has been carried out.
■ Caution: For each of the service
programmes, use descaling and
cleaning agents as described in the
instructions and observe the
(relevant) safety information.
■ Do not drink the liquids.
■ Never use vinegar, vinegar-based
products, citric acid or citric
acid-based products for descaling.
■ For cleaning and descaling only use
the tablets intended for such. The
tablets were specially developed for
this appliance and new stocks can
be ordered through customer
service. ~ "Accessories"
on page 11
■ Never insert descaling tablets or
other media into the grounds
compartment.
■ Never interrupt the service
programme.
■ Prior to starting a service
programme, remove, clean and
re-insert the brewing unit. Rinse the
milk system.
■ At the end of a service programme,
wipe down the appliance using a
soft, damp cloth to immediately
remove any descaler residue. This
residue may cause corrosion to
form.
■ New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use.
■ If one of the service programs is
interrupted, e.g. by a power outage,
proceed as follows:
The appliance automatically starts a
special rinsing.
1. Rinse out the water tank.
2. Pour in fresh still water up to the
"max" marking and confirm.
The programme starts and rinses the
appliance. Duration: approx.
2 minutes.
3. Empty, clean and re-insert the drip
tray.
4. Empty, clean and re-insert the milk
container.
The programme has finished. The
appliance is ready for use again.
5. Press the $/± button to exit the
programme.
Service programmes en
27
Rinse milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
For particularly thorough cleaning, the
milk system can be additionally rinsed
with water.
Duration: approx. 2 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Rinse milk system".
3. Press the rotary selector to start the
programme.
4. Empty, clean and re-connect the milk
container.
5. Place an empty glass under the
outlet system and confirm.
The programme runs.
6. Empty, clean and re-connect the milk
container.
7. Empty the glass.
The programme has finished. The
appliance is ready for use again.
8. Press the $/± button to exit the
programme.
The milk system should also be subject
to thorough manual cleaning at regular
intervals. ~ "Cleaning the milk system"
on page 25
Descaling
Duration: approx. 21 minutes
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Descale".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
5. Empty, clean and re-connect the milk
container.
6. Remove the water filter (if present)
and confirm.
7. Fill the empty water tank with
lukewarm water up to the marking
"0.5 l". Release one descaling
tablet TZ80002 in the water.
8. Place a container with a capacity of
at least 1.0 l under the outlet system
and confirm.
9. Press the rotary selector.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
10. Rinse out the water tank and (if
removed) re-insert the water filter.
11. Pour in fresh still water up to the
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 2 minutes
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk
container.
The programme has finished. The
appliance is ready for use again.
15. Press the $/± button to exit the
programme.
en Service programmes
28
Cleaning
Duration: approx. 6 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Clean".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
5. Open the grounds compartment,
add a cleaning tablet, close the
grounds compartment and confirm.
6. Place a container with a capacity of
at least 1.0 l under the outlet system
and confirm.
The programme runs.
Duration: approx. 5 minutes
7. Empty the container and confirm.
The programme has finished. The
appliance is ready for use again.
8. Press the $/± button to exit the
programme.
calc’nClean
Duration: approx. 26 minutes
calc’nClean combines the functions
"Descale" and "Clean". If the two
programmes are due close together,
the appliance suggests this service
programme automatically.
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"calc’nClean".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
5. Empty, clean and re-connect the milk
container.
6. Open the grounds compartment,
add a cleaning tablet, close the
grounds compartment and confirm.
7. Remove the water filter (if present)
and confirm.
8. Fill the empty water tank with
lukewarm water up to the marking
"0.5 l". Release one descaling
tablet TZ80002 in the water.
9. Place a container with a capacity of
at least 1.0 l under the outlet system
and confirm.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
10. Rinse out the water tank and (if
removed) re-insert the water filter.
11. Pour in fresh still water up to the
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 7 minutes
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk
container.
The programme has finished. The
appliance is ready for use again.
15. Press the $/± button to exit the
programme.
Trouble shooting en
29
3 Trouble shooting
Trouble shooting
Faults often have simple explanations.
Before calling the customer service,
please refer to the fault table and
attempt to correct the fault yourself.
Please read through the safety
information at the beginning of these
instructions.
Fault table
Problem Cause Remedial action
Coffee or milk froth quality varies considerably.
Build-up of limescale in the
appliance.
Descale the appliance in accordance
with the instructions.
No hot water dispensed. The milk system or the intake
of the milk system is soiled.
Clean the milk system or the intake.
~ "Cleaning the milk system"
on page 25
Too little or no milk froth. The milk system or the intake
of the milk system is soiled.
Clean the milk system or the intake.
~ "Cleaning the milk system"
on page 25
Unsuitable milk. Do not use milk that has already been
boiled. Use cold milk with a fat content
of at least 1.5%.
Build-up of limescale in the
appliance.
Descale the appliance as described in
the instructions.
No intake of milk is performed
by the milk system.
The milk system is incorrectly
assembled.
Correctly assemble all parts.
~ Fig. #
Incorrect connection sequence
for milk container and milk system.
Connect the milk system to the outlet
system first, then connect the milk container.
The personally selected
per-cup quantity is not reached.
Coffee dispensing slows to a
trickle or stops completely
Grinding level is too fine.
The ground coffee is too fine.
Set a coarser grinding level.
Use coarser ground coffee.
Heavy build-up of limescale in
the appliance.
Descale the appliance as described in
the instructions.
Air in the water filter. Immerse the water filter into water until
no more air bubbles escape; insert the
filter again.
No coffee flows out, only water. An empty bean container is not
detected by the appliance.
Pour in coffee beans
Note: The appliance will adjust to the
coffee beans upon the next dispensing
process.
The coffee shaft on the brewing
unit is blocked.
Clean the brewing unit. ~ "Cleaning
the brewing unit" on page 25
The appliance no longer
responds.
Fault in the appliance. Press and hold the on/offbutton for 10
seconds.
en Trouble shooting
30
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a higher pro-
portion of robusta beans.
The beans are no longer freshly
roasted.
Use fresh beans.
The grinding level is not suitable for the coffee beans.
Set a finer grinding level.
The coffee is too “acidic”. The grinding level is too coarse
or the ground coffee is too
coarse.
Set a finer grinding level or use finer
ground coffee.
Unsuitable type of coffee. Use a darker roast.
The coffee is too “bitter”. The set grinding level is too fine
or the ground coffee is too fine.
Set a coarser grinding level or use
coarser ground coffee.
Unsuitable type of coffee. Change the type of coffee.
The coffee tastes “burnt”. The brewing temperature is too
high
Reduce the temperature.
~ "Adjusting beverage settings"
on page 17
The set grinding level is too fine
or the ground coffee is too fine.
Set a coarser grinding level or use
coarser ground coffee.
Unsuitable type of coffee. Change the type of coffee.
The water filter does not stay in
position in the water tank.
The water filter is not mounted
correctly.
Immerse the water filter into water until
no more air bubbles escape; insert the
filter again.
Firmly press the water filter straight
down into the tank connection.
The coffee grounds are not
compact and are too wet.
The set grinding level is too fine
or too coarse, or not enough
ground coffee has been used.
Set a coarser or finer grinding level or
use two level measuring spoons of
ground coffee.
Water dripped onto the inner
floor of the appliance when the
drip tray was removed.
Drip tray removed too early. Wait a few seconds after the last drink
was dispensed before removing the
drip tray.
The drip tray cannot be
removed.
The coffee grounds container is
very full.
The coffee grounds slider
becomes stuck.
Clean the interior of the brewing unit.
~ "Cleaning the brewing unit"
on page 25
Correctly insert the coffee grounds
slider.
The outlet system cannot be
assembled or disassembled.
Incorrect sequence Connect the outlet system (with milk
system) first, then connect the milk system; alternatively, in the case of disassembly, first remove the milk container
and then remove the outlet system.
Loading...