Siemens Mammomat 3000 Installation Instructions

MAMMOMAT 300/1000/3000

Installation Instructions

Object tables; 64 31 600

64 31 618 64 31 626 64 31 634 64 83 759 64 83 742

Modifications when; M300 with SW 2.2 or earlier

M3000 with SW 1.4 or earlier M1000/3000 with SW 4.0 or later

The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registra tion of a utility model _or_ design,_are_ reserved.

English

Print No.: RXB7-120.031.06.02.02 Doc. Gen. Date: 01.00

Replaces: RXB7-120.031.06.01.02 65 58 725

General

Purpose

The purpose of this instruction is to describe

grid bars

of object tables listed below.

Object tables affected

The modification instruction is val id for the following object tables:

Object table Part No.

18x24 (bucky) 64 31 600 24x30 (bucky) 64 31 618 18x24 (cassette holder) 64 31 626 24x30 (cassette holder) 64 31 634 Magnification table 1.8 64 83 759 Magnification table 1.5 64 83 742

MAMMOMATs affected

If the generator software is version;

2.2 or earlier with MAMMOMAT 300

when

and

how

remove the

Tools req uired

1.4 or earlier with MAMMOMAT 3000 or

4.0 or later with MAMMOMAT 1000/3000

Standard assembly tools.

MAMMOMAT 300/1000/3000 RXB7-120.031.06. Page 2 of 4 Siemens-Elema AB Installation Instructions Rev. 02 01.00 SPS-UD Solna, SWEDEN

+ 2 hidden pages