Siemens MAG 1100, MAG 3100, MAG 5100 W, MAG 5000, MAG 6000 Handbook

Download

Page 1

Handbook

Order no.: FDK:521H0723

DKFD.PS.027.W3.02 - A5E00253199

SITRANS F M MAGFLO





Electromagnetic flowmeters Sensor types MAG 1100, MAG 3100, MAG 5100 W Signal converter types MAG 5000, MAG 6000

[]

Page 2

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



Siemens Flow Instruments range of electromagnetic flowmeters

MAG 5000 MAG 6000 MAG 3000

Ex-d

Outputs 1 current output 1 current output 1 current output

1digital output 1digital output 1 frequency/pulse output 1 relay output 1 relay output 1 relay output

Flow direction Uni/bidirectional Uni/bidirectional Uni/bidirectional

Communication Optional Add-on modules

HART



HART



Display 3 lines 3 lines 2 lines

20 characters 20 characters 16 characters

(optional without display) (optional without display)

Meter uncertainty ±0,5% o.r. ±0,25% o.r. ±0,25% o.r.

Enclosure IP 67, IP 20 IP 67, IP 20 IP 65, IP 67

Custody transfer PTB PTB approval (cold water) OIML R75

OIML R117

Ex-version [EEx ia] IIC [EEx ia/ib] IIB EEx de [ia/ib] IIB T6 Safety barrier [EEx ia] IIC

Power supply 12-24 V a.c./d.c. 12-24 V a.c./d.c. 24 V a.c./d.c.

115-230 V a.c. 115-230 V a.c.

Batch No Yes No

MAG 1100 MAG 1100 MAG 3100 MAG 3100 W MAG 5100 W

FOOD

Size [mm] DN 6-100 DN 10-100 DN 15-2000 DN 25-1200 DN 25-1200

Connection Flangeless Weld-in adapter, Flange Flange Flange

(Sandwich design) clamp adapter,

thread adapter

Pressure [bar] Max. 40 Max. 40 Max. 100 Max. 40 Max. 40

Temperature [

°°

°C] −20 to 200 −30 to 150 −40 to180 −10 to 95 −5 to 90

Liner Ceramic (Al

2 O3

) Ceramic (Al2 O3) Neoprene, EPDM, Neoprene and DN 25-40 &

PFA PFA Teflon (PTFE), EPDM D N 350-1200

Polyurethane, hard elastomer

Ebonite, DN 50-300 Linatex



composite elastomer

Electrodes Platinum Platinum AISI 316 Ti, AISI 316 Ti, AISI 316 Ti,

Hastelloy C276 Hastelloy Hastelloy C, PE electrodes PE electrodes

Platinum/Iridium,

Titanium, Tantalum,

PE electrodes

Enclosure IP 67 IP 67 IP 67/IP 68 IP 67/IP 68 IP 67/IP 68

Ex-version EEx ia/ib IIB T4-T6 EEx ia/ib IIB T4-T6

EEx ia/e IIC T3-T6

Page 3

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

1.1 Product introduction ................................................................................................................................................. 4

1.2 Mode of operation .................................................................................................................................................... 5

1.3 Pressure Equipment Directive 97/23ECs ................................................................................................................. 6

1.3.1 Exclusions ............................................................................................................................................................... 7

1.3.2 Product marking ...................................................................................................................................................... 7

2.1 Sensor MAG 1100 and MAG 1100 Ex ..................................................................................................................... 8

2.2 Sensor MAG 1100 FOOD ........................................................................................................................................ 9

2.3 Sensor MAG 3100, MAG 3100 Ex and MAG 3100 W ............................................................................................ 10

2.4 Sensor MAG 5100 W ............................................................................................................................................. 12

2.5.1 Signal converter MAG 5000 (DN 6 to DN 1200) .................................................................................................... 13

2.5.2 Signal converter MAG 6000 ................................................................................................................................... 14

2.5.3 Safety barrier (ia/ib) DN ≤ 300 ............................................................................................................................... 15

2.5.4 Safety barrier (ia) DN ≥ 350 ................................................................................................................................... 15

2.5.5 Cleaning unit .......................................................................................................................................................... 15

2.6 Meter uncertainty ................................................................................................................................................... 16

2.7 Output characteristics MAG 5000 and MAG 6000 ................................................................................................. 17

2.8.1 Sensor cables and conductivity of medium ............................................................................................................ 18

2.8.2 Minimum accept data for cable .............................................................................................................................. 18

2.9 HART



communication add-on module ................................................................................................................. 18

2.10 Cable data (Supplied by Siemens Flow Instruments) ........................................................................................... 18

3.1 Sizing table (DN 6 to DN 2000) .............................................................................................................................. 19

3.2.1 Minimum conductivity ............................................................................................................................................ 20

3.2.2 Liner selection guide .............................................................................................................................................. 20

3.2.3 Electrode selection guide ....................................................................................................................................... 20

3.3 Installation conditions ............................................................................................................................................ 20

3.4 Cleaning unit .......................................................................................................................................................... 24

3.5 Custody transfer approval ...................................................................................................................................... 25

3.6 Signal converter MAG 5000 CT, MAG 6000 CT Sealing ........................................................................................ 25

3.7 Ex installations ....................................................................................................................................................... 26

4.1 Sensor MAG 1100 ................................................................................................................................................. 27

4.2 Sensor MAG 1100 FOOD ...................................................................................................................................... 28

4.3 Sensor MAG 5100 W ............................................................................................................................................. 31

4.4 Sensor MAG 3100 and MAG 3100 W .................................................................................................................... 33

4.5 Signal converter ..................................................................................................................................................... 34

5.1 Potential equalization ............................................................................................................................................. 37

5.2 Inlet protection MAG 3100 ..................................................................................................................................... 38

5.3 Cathodic protected piping ...................................................................................................................................... 38

6.1 Compact installation MAG 5000 and MAG 6000.................................................................................................... 39

6.2.1 Add-on modules MAG 6000 only ........................................................................................................................... 41

6.2.2 Remote installation. At the sensor ......................................................................................................................... 41

6.2.3 Remote installation. Wall mounting ........................................................................................................................ 42

6.2.4 Remote installation. Signal conver ter in 19" insert ................................................................................................. 44

6.2.5 Add-on modules MAG 6000 only ........................................................................................................................... 45

6.2.6 Installation in IP 65 wall mounting enclosure ......................................................................................................... 46

6.2.7 Installation in IP 65 panel mounting enclosure (front of panel) ............................................................................... 47

6.2.8 Installation into the back of a panel ........................................................................................................................ 48

6.3 Signal converter Safety barrier .............................................................................................................................. 49

6.4 Signal converter Cleaning unit ............................................................................................................................... 50

7.1 Signal converter MAG 5000 and MAG 6000 connection diagram .......................................................................... 51

7.2 Wiring diagram for signal converter and sensor ..................................................................................................... 52

8.1 Keypad and display layout ..................................................................................................................................... 56

8.2 Menu build-up ........................................................................................................................................................ 57

8.2.1 Password ............................................................................................................................................................... 57

8.3.1 MAG 5000 and MAG 6000 ..................................................................................................................................... 58

8.3.2 MAG 6000 CT ........................................................................................................................................................ 59

8.4.1 Basic settings ........................................................................................................................................................ 60

8.4.2 Outputs .................................................................................................................................................................. 61

8.4.3 Digital and relay outputs ........................................................................................................................................ 61

8.4.4 Relay outputs ......................................................................................................................................................... 62

8.4.5 Exter nal input ......................................................................................................................................................... 62

8.4.6 Sensor characteristics ........................................................................................................................................... 63

8.4.7 Reset mode ........................................................................................................................................................... 63

8.4.8 Service mode ........................................................................................................................................................ 64

8.4.9 Operator menu setup ............................................................................................................................................. 65

8.4.10 Product identity ...................................................................................................................................................... 66

8.4.11 Change password .................................................................................................................................................. 66

8.4.12 Language mode ..................................................................................................................................................... 67

8.4.13 HART



communication MAG 5000 HART or as add-on module ........................................................................... 67

8.5.1 Flow rate ................................................................................................................................................................ 68

8.5.2 Totalizer ................................................................................................................................................................. 68

8.5.3 Batch ..................................................................................................................................................................... 68

8.6.1 Settings available ................................................................................................................................................... 69

8.6.2 Dimension dependent factory settings MAG 5000 and MAG 6000 ........................................................................ 70

8.6.3 Dimension dependent batch and pulse output settings .......................................................................................... 70

8.6.4 MAG 5000 CT and MAG 6000 CT settings ............................................................................................................ 71

8.7.1 Error handling ........................................................................................................................................................ 72

8.7.2 List of error numbers .............................................................................................................................................. 73

9.1 Converter check list ............................................................................................................................................... 74

9.2 Trouble shooting MAG converter ............................................................................................................................ 75

9.3 Check list MAG sensor .......................................................................................................................................... 76

9.4 Coil resistance table .............................................................................................................................................. 77

10.1 Sensor MAG 1100 ................................................................................................................................................. 78

10.2 Adapter, MAG 1100 FOOD (contains 2 adapters, 2 clamp rings and 2 gaskets) ................................................... 80

10.3 Sensor MAG 3100 and MAG 3100 Ex ................................................................................................................... 82

10.4 Sensor MAG 3100 W ............................................................................................................................................. 84

10.5 Sensor MAG 5100 W ............................................................................................................................................. 85

10.6 Signal converter ..................................................................................................................................................... 86

10.7 Signal converter 19" incl. back plate ...................................................................................................................... 87

10.8 Accessories ........................................................................................................................................................... 88

10.9 Calibration ............................................................................................................................................................. 89

2. Technical data

1. Product introduction

3. Project guidance

4. Dimensions and weight

6. Installation of signal converter

5. Installation of sensor

7. Electrical connection

8. Commissioning

10. Ordering

9. Service

Technical data

Sensor

CommissioningOrdering D & WInstallation of signal conv.

E. c.

Project guidance

Page 4

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

All SITRAN S F M MAGFLO electromagnetic flowmeters feature a unique SENSORPROM

memory unit which stores sensor calibration data and signal converter settings for the lifetime of the product. At commissioning the flowmeter commences measurement without any initial programming.

1.1 Product introduction

1. Product introduction

SITRANS F M MAGFLO



electromagnetic flowmeters offer reliable, precise and inexpensive flow measurement on all electrically conductive liquids. Typical applications are found in all industries. E.g.:

• Water sector: Potable water, treatment of chemicals, waste water and sludge.

• Food sector: Dairy products, beer, wine, soft-drinks and fruit juices.

• Chemical sector: Detergents, pharmaceuticals, acids and alkalies.

• Other sectors: District heating, paper pulp and mining slurries.

SITRANS F M MAGFLO



electromagnetic flowmeters are characterised by simplicity:

⇒ Simple to install ⇒ Simple to commission ⇒ Simple to operate ⇒ Simple to maintain

SITRANS F M MAGFLO



electromagnetic flowmeters are manufactured by Siemens Flow

Instruments A/S - one of the worlds leading makers of flowmeters.

The factory settings matching the sensor are stored in the SENSORPROM

unit. Also customer specified

settings are downloaded to the SENSORPROM

unit. Should the signal converter be replaced, the new converter will upload all previous settings and resume measurement without any need for reprogramming. Furthermore, the "fingerprint" used in connection with the Siemens Flow Instruments Verificator is stored during the sensor calibration.

USM II "Plug & Play" add-on communication modules.

USM II - the Universal Signal Module with "Plug & Play" simplicity makes it easy to access and integrate the flow measurement with almost any system. It ensures the flowmeter will be easy to upgrade to new communication platforms in the future, too.

Page 5

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

1. Product introduction

= When an electrical conductor of length L is moved at velocity v, perpendicular to the lines of flux

through a magnetic field of strength B, the voltage U

is induced at the ends of the conductor

Ui = L x B x v

Ui= Induced voltage L = Conductor length = Inner pipe diameter = k

B = Magnetic field strength = k

v = Velocity of conductor (media) k=k1 x k

Ui = k x v, the electrode signal is directly proportional to the fluid velocity

SENSOR

The sensor converts the flow into an electrical voltage (Ui) proportional to the velocity of the flow. The sensor is built up of a stainless steel pipe, 2 coils, electrodes, an isolating liner, housing and where applicable, connecting flanges.

SIGNAL CONVERTER

The signal converter consists of a number of function blocks which convert the sensor voltage into flow readings.

Power supply

2 different types of power supply are available. A 12 - 24 V a.c./d.c. and a 115 - 230 V a.c. switch mode type.

Coil current module generates a pulsating magnetizing current that drives the coils in the sensor. The current is permanently monitored and corrected. Errors or cable faults are registered by the selfmonitoring circuit.

Input circuit amplifies the flow proportional signal from the electrodes. The input impedance is extremely high: >10

Ω which allows flow measurements on fluids with conductivities as low as

1 mS/cm. Measuring errors due to cable capacitance are eliminated due to active cable screening.

Digital signal processor converts the analog flow signal to a digital signal and suppresses electrode noise through a digital filter. Inaccuracies in the signal converter as a result of long-term drift and temperature drift are monitored and continuously compensated for via the self-monitoring circuit. The analog to digital conversion takes place in an ultra low noise ASIC with 23 bit signal resolution. This has eliminated the need for range switching. The dynamic range of the signal converter is therefore unsurpassed with a turn down ratio of minimum 3000:1.

CAN communication

The signal converter operates internal via an internal CAN communication bus. Signals are transferred to/from a signal conditioner to the display module, internal/external option modules and the dialog module.

Dialog module

The display unit consists of a 3-line display and a 6-key keypad. The display shows a flow rate or a totalizer value as a primary reading.

Output module converts flow data to an analog, a digital and a relay output. The outputs are galvanically isolated and can be individually set to suit a particular application.

1.2 Mode of operation

The flow measuring principle is based on Faraday’s law of electromagnetic induction. The flowmeter consists of a sensor type MAG 1100, MAG 3100 or MAG 5100 W and a signal converter type MAG 5000 or 6000.

Page 6

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2345678901234567890

12345678901

234567890

12345678901

2345678901234567890

1. Product introduction

1.3 Pressure Equipment Directive 97/23ECs

Flange PN 6 PN 10 PN 16 PN 25 PN 40 PN 64 PN 100 150 lb 300 lb AWWA

25 N/A N/A N/A N/A SEP N/A SEP SEP SEP N/A 40 N/A N/A N/A N/A SEP N/A PED SEP SEP N/A 50 N/A N/A N/A N/A SEP PED PED SEP PED* N/A 65 SEP N/A SEP N/A PED PED PED SEP PED* N/A

80 SEP N/A SEP N/A PED PED PED SEP PED* N/A 100 SEP N/A SEP N/A PED PED PED SEP PED* N/A 125 SEP N/A SEP N/A PED PED PED PED* PED* N/A 150 SEP N/A PED N/A PED PED PED PED* PED* N/A 200 SEP SEP PED PED PED PED PED PED* PED* N/A 250 SEP LVD PED PED PED PED PED PED* PED* N/A 300 SEP LVD PED PED PED PED PED PED* PED* N/A 350 LVD LVD PED PED PED PED PED PED* PED* N/A 400 LVD LVD PED PED PED PED N/A PED* PED* N/A 450 LVD LVD PED PED PED N/A N/A PED* PED* N/A 500 LVD LVD PED PED PED N/A N/A PED* PED* N/A 600 LVD LVD PED PED PED N/A N/A PED* PED* N/A 700 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 750 N/A N/A N/A N/A N/A N/A N/A N/A N/A PED* 800 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 900 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED*

1000 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1050 N/A N/A N/A N/A N/A N/A N/A N/A N/A PED* 1100 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1200 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1400 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1500 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1600 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 1800 LVD LVD PED* N/A N/A N/A N/A N/A N/A PED* 2000 LVD LVD PED* N/A N/A N/A N/A N/A PED*

MAG 3100 & MAG 3100 W

234567890123456789

From May 30th 2002 the "Pressure Equipment Directive" is mandatory for all pressure equipment sold within the EU and EFTA.

The approach that Siemens Flow Instruments has taken is outlined in the tables below.

MAG 5100 W

Flange

PN 10 PN 16 PN 40 150 lb 300 lb

25 N/A N/A SEP SEP N/A 40 N/A N/A SEP SEP N/A 50 N/A SEP N/A SEP N/A 65 N/A SEP N/A SEP N/A

80 N/A SEP N/A SEP N/A 100 N/A SEP N/A SEP N/A 125 N/A SEP N/A PED* N/A 150 N/A PED N/A PED* N/A 200 SEP PED N/A PED* N/A 250 LVD PED N/A PED* N/A 300 LVD PED N/A PED* N/A 350 LVD PED N/A PED* N/A 400 LVD PED N/A PED* N/A 450 LVD PED N/A PED* N/A 500 LVD PED N/A PED* N/A 600 LVD PED N/A PED* N/A 700 LVD PED* N/A N/A PED* 750 N/A N/A N/A N/A PED* 800 LVD PED* N/A N/A PED* 900 LVD PED* N/A N/A PED*

1000 LVD PED* N/A N/A PED* 1050 N/A N/A N/A N/A PED* 1100 N/A N/A N/A N/A PED* 1200 LVD PED* N/A N/A PED*

Page 7

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

234567890

MAG 3100 high temperature PTFE

Flange PN 6 PN 10 PN 16 PN 25 PN 40 150 lb 300 lb

15 N/A N/A N/A N/A SEP SEP SEP 25 N/A N/A N/A N/A SEP SEP SEP 40 N/A N/A N/A N/A PED LVD PED* 50 N/A N/A N/A N/A PED PED* PED* 65 LVD N/A PED N/A PED PED* PED*

80 LVD N/A PED N/A PED PED* PED* 100 LVD N/A PED N/A PED PED* PED* 125 PED N/A PED N/A PED PED* PED* 150 PED N/A PED N/A PED PED* PED* 200 PED PED PED PED PED PED* PED* 250 PED PED PED PED PED PED* PED* 300 PED PED PED PED PED PED* PED* 350 PED PED PED PED PED PED* PED* 400 PED PED PED PED PED PED* N/A 450 PED PED PED PED PED PED* N/A 500 PED PED PED PED PED PED* N/A 600 PED PED PED PED PED*

1. Product introduction

12345678901234567890123456789012123456

234567890123456789012345678901212345

12345678901234567890123456789012123456

1234567890

23456789

1234567890

MAG 1100

Flange Ceramic Ceramic Ceramic Ceramic Ceramic PFA PFA PFA

mm 150° 200° Ex Ex-d FOOD Ex FOOD

6 SEP N/A SEP SEP N/A N/A N/A N/A 10 SEP N/A SEP SEP SEP SEP SEP SEP 15 SEP SEP SEP SEP SEP SEP SEP SEP 25 SEP SEP SEP SEP SEP SEP SEP SEP 40 PED PED PED PED PED LVD LVD LVD 50 PED PED PED PED PED PED PED PED 65 PED N/A PED PED PED PED PED PED 80 PED PED PED PED PED PED PED PED

100 PED PED PED PED PED PED PED PED

The key to the above tables is as follows.

PED Product covered by PED and only available as fully PED conforming

PED* Product covered by PED but available as either conforming or non conforming to PED

SEP Excluded from PED under Sound Engineering Practice

LVD Excluded from PED under the Low Voltage Directive

1.3.1 Exclusions

All products sold outside of EU and EFTA are excluded from the directive, also products sold into certain market sectors are also excluded. These include

1) Meters used in networks for the supply, distribution and discharge of water.

2) Meters used in pipelines for the conveyance of any fluid from offshore to onshore.

3) Meters used in the extraction of petroleum or gas, including christmas tree and manifold equipment.

4) Any meter mounted on a ship or mobile offshore platform.

1.3.2 Product marking

All meters will now carry either a CE mark or a CE mark followed by 0086

0086: This indicates that the product conforms to PED 97/23/EC, LVD 73/23/EEC + Amendment

93/68/EEC & EMC 89/336 EEC

CE: This indicates that the product conforms to LVD 73/23/EEC + Amendment 93/68/EEC &

EMC 89/336 EEC

Page 8

8 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



Type Flangeless sensor (Sandwich design)

Nominal size

DN 6, 10, 15, 25, 40, 50, 65, 80, 100 DN 10, 15, 25, 40, 50, 65, 80, 100 DN 6, 10, 15, 25, 40, 50, 65, 80, 100

Operating pressure DN 6-65: 40 bar, DN 80: 37.5 bar, DN 6-65: 40 bar, DN 80: 37.5 bar,

DN 100: 30 bar 20 bar DN 100: 30 bar

Vacuum: 1 × 10-6 bar Vacuum: 0.02 bar Vacuum: 1 × 10-6 bar

Temperature of medium

PFA

−30°C to +130°C

Ceramic

−20°C to +150°C −20°C to +120°C

High temp.

−20°C to +200°C Suitable for steam sterilization at 150°C

Temperature shock (Duration > 1 min.): Max. ±100°C momentarily (Duration > 1 min.):

(Ceramic liner) DN 6, 10, 15, 25: DN 6, 10, 15, 25:

Max. ∆T ≤ 15°C/min. Max. ∆T ≤ 15°C/min.

DN 40, 50, 65: Max. ∆T ≤ 10°C/min. DN 40, 50, 65: Max. ∆T ≤ 10°C/min.

DN 80, 100: Max. ∆T ≤ 5°C/min. DN 80, 100: Max. ∆T ≤ 5°C/min.

(Duration ≤ 1 min., (Duration ≤ 1 min., followed by 10 min. rest): followed by 10 min. rest):

DN 6, 10, 15, 25: Max. ∆T ≤ 80°C DN 6, 10, 15, 25: Max. ∆T ≤ 80°C

DN 40, 50, 65: Max. ∆T ≤ 70°C DN 40, 50, 65: Max. ∆T ≤ 70°C

DN 80, 100: Max. ∆T ≤ 60°C DN 80, 100: Max. ∆T ≤ 60°C

Ambient temperature Remote signal converter: −40°C to +100°C

Compact signal converter: −20°C to +50°C

Liner Aluminium oxide Al2O3 (ceramics) Reinforced PFA (Teflon) Aluminium oxide Al2O3 (ceramics)

Electrodes Platinum with gold/titanium brazing Hastelloy C-276 Platinum with gold/titanium brazing

alloy alloy

Enclosure Stainless steel AISI 316 L (1.4404) Stainless steel AISI 316 (1.4404) Stainless steel AISI 316 L (1.4404)

Terminal box

Standard

Fibre glass-reinforced polyamide Fibre glass-reinforced polyamide Stainless steel AISI 316 (1.4436)

(not compact) High temp.

Stainless steel AISI 316 (1.4436) Stainless steel AISI 316 L (1.4436)

Fixing studs Stainless steel AISI 304 (1.4301) Stainless steel AISI 304 (1.4301)

Number and size to EN 1092-1:2001 Number and size to EN 1092-1:2001

Mating flanges EN 1092-1:2001, ANSI B16.5

class 150 and 300 or equivalent

EN 1092-1:2001, ANSI B16.5 class 150 and 300 or equivalent

Option

DN 6/10: ½" pipe connection adapters thread: ½" tappered ISO 7-1

Gaskets

Standard

EPDM (max. 150°C, PN 40) EPDM (max. 150°C, PN 40)

Option

Graphite (max. 200°C, PN 40) Graphite (max. 200°C, PN 40)

Option

PTFE (max. 130°C, PN 25) PTFE (max. 130°C, PN 25)

Cable entries 4 Pg 13.5

Enclosure rating

Standard

IP 67 to EN 60529 (NEMA 4x) (1 m w.g for 30 min.)

Option

IP 68 to EN 60529 (NEMA 6) (10 m w.g. cont.)

Mechanical load (vibration) 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36 18-1000 Hz random in all directions

to EN 60068-2-36

Sensor: 3.17 G/Compact Ex-d: 1.14 G

Test pressure 80 bar (2 × PN) 40 bar (2 × PN) 80 bar (2 × PN)

Approvals 3A EEx ia/ib IIB T4-T6/

DEMKO, No. 97D.121909X EEx de [ia/ib] IIB T4-T6/ DEMKO 94C.115327X

Excitation frequency DN 6-65: 12.5 Hz DN 10-65: 12.5 Hz DN 6-65: 6.25 Hz

DN 80-100: 6.25 Hz DN 80-100: 6.25 Hz DN 80-100: 3.125 Hz

Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX

2. Technical data

2.1 Sensor MAG 1100 and MAG 1100 Ex

MAG 1100

MAG 1100 PFA

MAG 1100 Ex & Ex-d

MAG 1100 and MAG 1100 Ex

Page 9

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2. Technical data

Technical data

Adapter Stainless steel AISI 316 Pressure Pipe connection/ Adapter for direct welding into dairy pipe:

Operating

Tri-Clover

ISO 2037, DIN 11850, SMS 3008, BS 4825-1

pressure DN 10, 15, 25, 40, 50, 65, 80 PN 40

DN 100 PN 25

Clamp adapter:

Tri-Clamp

ISO 2852, DIN 32676, SMS 3016, BS 4825-3

DN 10, 15, 25, 40, 50 PN 16 DN 65, 80, 100 PN 10

Thread adapter:

DIN 11851: DN 10, 15, 25, 40 PN 40

DN 50, 65, 80, 100 PN 25

ISO 2853, SS 3351, BS 4825-4: DN 10, 15, 25, 40, 50, 65, 80 PN 16 SMS 1145: DN 25, 40, 50, 65, 80 PN 6

Gasket

Standard

EPDM (−20 °C to 150 °C)

Option

NBR (−20 °C to 100 °C)

Clamp Stainless steel AISI 304, ISO 2852

Type Hygienic sensor Nominal size

DN 10, 15, 25, 40, 50, 65, 80, 100

Process connection Hygienic adapters available for:

♦ Direct welding into dairy pipe ♦ Clamp fitting ♦ Threaded fitting

Operating pressure DN 10-65: 40 bar, DN 80: 37.5 bar, DN 100: 30 bar 20 bar

Vacuum

1 × 10-6 bar 0.02 bar

Temperature of medium −20°C to +150°C −30°C to +130°C

Suitable for steam sterilization Suitable for steam sterilization at 150°C

Temperature shock (Duration > 1 min.): Max. ±100°C momentarily

DN 10, 15, 25 Max. ∆T ≤ 15°C/min. DN 40, 50, 65 Max. ∆T ≤ 10°C/min. DN 80, 100 Max. ∆T ≤ 5°C/min. (Duration ≤ 1 min., followed by 10 min. rest):

DN 10, 15, 25 Max. ∆T ≤ 80°C DN 40, 50, 65 Max. ∆T ≤ 70°C DN 80, 100 Max. ∆T ≤ 60°C

Ambient temperature Remote signal converter: −40°C to +100°C Remote signal converter: −40°C to +100°C

Compact signal converter: −20°C to +50°C Compact signal converter: −20°C to +50°C

Liner Aluminium oxide Al2O3 (ceramic) Reinforced PFA (Teflon) Electrodes Platinum with gold/titanium brazing alloy Hastelloy C-276 Enclosure Stainless steel AISI 316 L (1.4404) Stainless steel AISI 316 L (1.4404) Terminal box

Standard

Fibre glass-reinforced polyamide Fibre glass-reinforced polyamide

(not compact) Option

Stainless steel AISI 316 (1.4436) Stainless steel AISI 316 (1.4436)

Cable entries 4 Pg 13.5 4 Pg 13.5 Enclosure rating

Standard

IP 67 to EN 60529 (NEMA 4x) (1 m w.g for 30 min.) IP 67 to EN 60529 (NEMA 4x) (1 m w.g for 30 min.)

Option

IP 68 to EN 60529 (NEMA 6) (10 m w.g. cont.) IP 68 to EN 60529 (NEMA 6) (10 m w.g. cont.)

Mechanical load (vibration) 18-1000 Hz random, 3.17 G rms in all directions 18-1000 Hz random, 3.17 G rms in all directions

to EN 60068-2-36 to EN 60068-2-36

Test pressure 80 bar (2 × PN) 40 bar (2 × PN) Approvals 3A, EHEDG 3A Excitation frequency DN 10-65: 12.5 Hz DN 10-65: 12.5 Hz

DN 80-100: 6.25 Hz DN 80-100: 6.25 Hz

Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX

2.2 Sensor MAG 1100 FOOD

MAG 1100 FOOD MAG 1100 FOOD PFA

Accessories MAG 1100 FOOD

Note

When combined sensor and adapter, the working pressure is the lower rated of the pair.

MAG 1100 FOOD

Page 10

10 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



Type Sensor with flanges Sensor with flanges Sensor with flanges Nominal size

DN 15-2000 DN 15-2000 / 15-300 DN 25-1200

Temperature of medium Temperature classification

Liner:

T3 + T4 T5 T6 Neoprene (standard) 0 to 70°C 0 to 70°C 0 to 70°C 0 to 70°C 0 to 70°C EPDM1) −10 to 95°C −10 to 95°C −10 to 90°C −10-75°C −10 to 95°C Linatex rubber −40 to 70°C2) −20 to 70°C −20 to 70°C −20 to 70°C Ebonite1) 0 to 95°C 0 to 95°C 0 to 90°C 0 to 75°C PTFE −20 to 100°C −20 to 100°C −20 to 90°C −20 to 75°C PTFE high temperature −20 to 180°C

Ambient temperature

Remote signal converter −40°C to 100°C −20°C to 50°C −40°C to 100°C Compact signal converter −20°C to 50°C −20°C to 50°C −20°C to 50°C

Operating pressure3)

[[

[abs.bar

]]

]

Liner:

Neoprene 0.01 to 100 bar 0.01 to 100 bar 0.01 to 40 bar EPDM 0.01 to 40 bar 0.01 to 40 bar 0.01 to 40 bar Linatex



0.01 to 40 bar 0.01 to 40 bar

Ebonite 0.01 to 100 bar 0.01 to 100 bar

PTFE teflon:

DN 15 to 600 Max. 100°C: 0.3 to 50 bar 0.3 to 40 bar DN 15 to 300 Max. 180°C: 0.6 to 50 bar

Excitation frequency DN 15 - 65: 12.5 Hz DN 15 - 65: 6.25 Hz All sizes 3.125 Hz

DN 80 - 150: 6.25 Hz DN 80/100: 3.125 Hz DN 200 - 1200: 3.125 Hz DN 125 - 300: 1.5625 Hz DN 1400 - 2000: 1.5625 Hz DN 350 - 1200: 3.125 Hz

Enclosure rating

Standard

IP 67 to EN 60529 (NEMA 4x) (1 m w.g for 30 min.)

Option

IP 68 to EN 60529 (NEMA 6) (10 m w.g. cont.)

Cable entries 4 Pg 13.5 Mechanical load 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36 Test pressure 1.5 × PN Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX

2.3 Sensor MAG 3100, MAG 3100 Ex and MAG 3100 W

MAG 3100 MAG 3100 Ex / Ex-d MAG 3100 W

) With WRC (Water Research Council, UK) approval

) For temperature below −20°C AISI 304 or 316 flanges must be used

) Maximum operating pressure decreases with increasing operating temperature and with stainless steel flanges

MAG 3100, MAG 3100 Ex and MAG 3100 W

Page 11

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2. Technical data

Technical data

Flanges

Standard

DN 15-50: PN 40 DN 25-50: PN 40 EN 1092-1:20011) DN 65-150: PN 16 DN 65-150: PN 16 Rased face DN 200-1000: PN 10 DN 200-1200: PN 10

DN 1100 -2000: PN 6

Option

DN 65-1000: PN 6 DN 200-600: PN 16

DN 1200-2000: PN 10

DN 200-2000: PN 16

DN 200-600: PN 25

DN 65-600: PN 40

DN 50-400 PN 63

DN 25-350 PN 100 ANSI B 16.5 3/4"-24": Class 150 (20 bar) 3/4"-24": Class 150 (20 bar) (∼BS 1560) 3/4"-24": Class 300 (50 bar) AS 2129 3/4"-48": Table D/E AS 4087 Class 14 (DN 50 - 1200, 14 bar)

Class 21 (DN 50 - 600, 21 bar)

Class 35 (DN 50 - 600, 35 bar) AWWA C-207 28"-78": Class D (10 bar) 28"-48": Class D (10 bar)

Electrodes

Standard

AISI 316 Ti (1.4571) AISI 316 Ti (1.4571)

Option

Hastelloy C-276, Platinum / Iridium, Titanium,

AISI 316 Ti Ceramic Coated, Tantalum

PE - electrodes

Standard

As measuring electrodes (except PTFE) AISI 316 Ti (1.4571)

Measuring pipe

Standard

AISI 304 (1.4301) AISI 304 (1.4301)

Option

AISI 316 L (1.4404)

Flange and

Standard

Carbon steel Carbon steel

housing material Corrosion-resistant two-component coating (min. 150 µm) Corrosion-resistant two-compo-

nent coating (min. 150 µm)

Option

AISI 304 (1.4301) flanges and carbon steel housing. Coating as above

Option

AISI 316 L (1.4404) flanges and housing

Ex-approval

Remote

DN 15-25 EEx ia/ib IIB T4-T6

DN 40-300 EEx ia/ib IIB T4-T6

DN 350-2000 EEx e ia IIC T3-T6

Compact

DN 15-300 EEx de [ia/ib] IIB T4-T6

MAG 3000 Ex-d

Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX

2.3 Sensor MAG 3100, MAG 3100 Ex and MAG 3100 W

(continued)

MAG 3100 MAG 3100 Ex / Ex-d MAG 3100 W

MAG 3100, MAG 3100 Ex and MAG 3100 W

) EN 1092-1, DIN 2501 & BS 4504 have the same mating dimensions

Page 12

12 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



Type Sensor with flanges Design Straight Coned 1 DN reduction Straight Nominal size

25-40 50-300 350-1200

Liner Hard elastomer Composite elastomer Hard elastomer

(hard rubber) (hard & soft rubber) (hard rubber)

Liner approvals WRc WRc WRc Medium temperature −5 to 90°C Ambient temperature

Remote signal converter −40 to 90°C Compact signal converter −20 to 50°C

Operating pressure 0.01 to 40 bar 0.03 to 20 bar 0.01 to 16 bar Excitation frequency 12.5 Hz 50-65 mm: 12.5 Hz 3.125 Hz

80-150 mm: 6.25 Hz

200-300 mm: 3.125 Hz

Enclosure rating

Standard

IP 67 to EN 60529 1 m w.g. for 30 minutes

Option

IP 68 to EN 60529 10 m w.g. continuously

Cable entries 4 Pg 13.5 Mechanical load 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36 Test pressure 1.5 × nominal pressure Flanges

EN 1092-1

Standard

PN 40 50-150 mm: PN 16 PN 10

200-300 mm: PN 10

Option

200-300 mm: PN 16 PN 16

ANSI B16.5

Standard

Class 150 lb Class 150 lb 14"-24": Class 150 lb

AWWA C-207 Standard 28"-48": Class D

Pressure drop at 3 m/sec. As straight pipe Max. 25 mbar As straight pipe Electrodes AISI 316 Ti (1.4571) PE/grounding electrodes

Standard

AISI 316 Ti (1.4571)

Measuring pipe/meter body AISI 304 (1.4301) Composite elastomer AISI 304 (1.4301) Flanges Carbon steel Housing Carbon steel Surface finish Two component epoxy Polyester powder coat Two component epoxy

min. 150 microns min. 100 microns min. 150 microns

Colour RAL 7035 pale grey Approvals

Conforms to

PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX1)

2.4 Sensor MAG 5100 W

) For sizes greater than 600 mm PED conformity is available as a cost added option, the basic unit will only carry the LVD (Low Voltage Directive)

and EMC approval.

MAG 5100 W

Page 13

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2. Technical data

Technical data

Current output

Current 0-20 mA, 4-20 mA or 4-20 mA + alarm Load < 800 ohm Time constant 0.1-30 s adjustable

Digital output

Frequency 0-10 kHz, 50% duty cycle Time constant 0.1-30 s adjustable

Active 24 V d.c., 30 mA, 1 KΩ ≤ R

load

≤ 10 KΩ, short-circuit-protected

Passive 3-30 V d.c., max. 110 mA, 200 Ω ≤ R

load

≤ 10 KΩ

Relay Time constant Changeover relay, time constant same as current time constant

Load 42 V a.c./2 A, 24 V d.c./1A

Digital input 11-30 V d.c., Ri = 4.4 KΩ

Activation time 50 ms Current I

11 V d.c.

= 2.5 mA, I

30 V d.c.

= 7 mA

Functions Flow rate, 2 totalizers, low flow cut-off, empty pipe cut-off, flow direction, error system, operating time,

uni/bidirectional flow, limit switches, pulse output, control for cleaning unit

Galvanic isolation All inputs and outputs are galvanically isolated Cut-off Low flow 0-9.9% of maximum flow

Empty pipe Detection of empty pipe1)

Totalizer Two eight-digit counters for forward, net or reverse flow Display Background illumination with alphanumerical text, 3 × 20 characters to indicate flow rate, totalized

values, settings and faults

Reverse flow indicated by negative sign

Time constant Time constant as current output time constant

Zero point adjustment Automatic Electrode input impedance > 1 x 1014 Ω Excitation frequency Sensor size depending pulsating d.c. current (125 mA) Ambient temperature Display version during operation: −20 to +50°C

Blind version during operation: −20 to +60°C

During storage: −40 to +70°C (RH max. 95%)

Custody transfer approval PTB MAG 5000 CT (cold water)

Communication

Standard

Without serial communication

Optional

HART



Compact

Enclosure material Fibre glass-reinforced polyamide Enclosure rating IP 67 to EN 60529 and DIN 40050 (1 m w.g. for 30 minutes) Mechanicalload 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36

19" insert

Enclosure material Standard 19" insert of aluminium/steel (DIN 41494)

Width: 21 TE

Height: 3 HE

Enclosure rating IP 20 to EN 60529 and DIN 40050 Mechanical load Version: 1 G, 1-800 Hz sinusoidal in all directions to EN 60068-2-36

EMC performance Emission: EN 50081-1 (Light industry)

Immunity: EN 50082-2 (Industry)

Supply voltage 115-230 V a.c. +10% to −15%, 50-60 Hz

11-30 V d.c. or 11-24 V a.c.

Power consumption 230 V a.c.: 9 VA

24 V d.c.: 9 W, IN = 380 mA, IST = 8 A (30 ms)

12 V d.c.: 11 W, IN = 920 mA, IST = 4 A (250 ms)

2.5.1 Signal converter MAG 5000 (DN 6 to DN 1200)

Accuracy 0.5%

MAG 5000 and MAG 5000 CT

) Special cable required in separate mounted installation

6.221

99.19

Page 14

14 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



Current output

Current 0-20 mA, 4-20 mA or 4-20 mA + alarm Load < 800 ohm Time constant 0.1-30 s adjustable

Digital output

Frequency 0-10 kHz, 50% duty cycle Time constant 0.1-30 s adjustable

Active 24 V d.c., 30 mA, 1 KΩ ≤ R

load

≤ 10 KΩ, short-circuit-protected

Passive 3-30 V d.c., max. 110 mA, 200 Ω ≤ R

load

≤ 10 KΩ

Relay Time constant Changeover relay, time constant same as current time constant

Load 42 V a.c./2 A, 24 V d.c./1A

Digital input 11-30 V d.c., Ri = 4.4 KΩ

Activation time 50 ms Current I

11 V d.c.

= 2.5 mA, I

30 V d.c.

= 7 mA

Functions Flow rate, 2 totalizers, low flow cut-off, empty pipe cut-off, flow direction, error system, operating time,

uni/bidirectional flow, limit switches, pulse output, control for cleaning unit and batch

Galvanic isolation All inputs and outputs are galvanically isolated Cut-off Low flow 0-9.9% of maximum flow

Empty pipe Detection of empty pipe1)

Totalizer Two eight-digit counters for forward, net or reverse flow Display Background illumination with alphanumerical text, 3 × 20 characters to indicate flow rate, totalized

values, settings and faults Reverse flow indicated by negative sign

Time constant Time constant as current output time constant

Blind version during operation: −20 to +60°C

During storage: −40 to +70°C (RH max. 95%) Custody transfer approval PTB DANAK OIML R75 DANAK OIML R117 MAG 6000 CT (cold water) (hot water) (cold water/milk, beer etc.)

Communication

Standard

Prepared for client mounted add-on modules

Optional

HART, Profibus PA, Profibus DP, CANopen, DeviceNet as add-on module

Compact

19" insert

Enclosure material Standard 19" insert of aluminium/steel (DIN 41494)

Width: 21 TE

Height: 3 HE

Enclosure rating IP 20 to EN 60529 and DIN 40050 Mechanical load Version: 1 G, 1-800 Hz sinusoidal in all directions to EN 60068-2-36

EMC performance Emission: EN 50081-1 (Light industry)

Immunity: EN 50082-2 (Industry) Supply voltage 115-230 V a.c. +10% to −15%, 50-60 Hz

11-30 V d.c. or 11-24 V a.c. Power consumption 230 V a.c.: 9 VA

24 V d.c.: 9 W, IN = 380 mA, IST = 8A (30 ms)

12 V d.c.: 11 W, IN = 920 mA, IST = 4A (250 ms)

2.5.2 Signal converter MAG 6000

Accuracy 0.25%

MAG 6000 and MAG 6000 CT

6.221

99.19

) Special cable required in separate mounted installation

Page 15

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2. Technical data

Technical data

Safety barrier & cleaning unit

Application As combined unit with MAG 6000 only and MAG 1100 Ex/3100 Ex in the size

range DN 6-300

Ex approval [EEx ia/ib] IIB Cable parameter Group Capacity in µF Inductance in mH

Electrode cable IIB ≤ 31 ≤ 80 Coil cable IIB ≤ 0.5 ≤ 8

Ambient temperature During operation: −20 to +50°C

During storage: −20 to +70°C

19" insert

Enclosure material Standard 19" insert in aluminium/steel (DIN 41494)

Width: 21 TE

Height: 3 HE Enclosure rating IP 20 to EN 60529 and DIN 40050 Mechanical load 1 G, 1-800 Hz sinusoidal in all directions to EN 60068-2-36

EMC performance

Emission EN 50081-1 (Light industry)

Immunity EN 50082-2 (Industry)

2.5.3 Safety barrier (ia/ib) DN

≤≤

≤ 300

Application For use with MAG 5000/6000 19 insert and MAG 3100 Ex in the size

range DN 350-2000

Ex approval [EEx ia] IIC Cable parameter Group Capacity in µF Inductance in mH

IIC ≤ 4.1 ≤ 1.5

IIB ≤ 45 ≤ 87

IIA ≤ 45 ≤ 87

Ambient temperature During operation: −20 to +50°C

During storage: −20 to +70°C

19" insert

Enclosure material Standard 19" insert in aluminium/steel (DIN 41494)

Width: 21 TE

Height: 3 HE Enclosure rating IP 20 to EN 60529 and DIN 40050 Mechanical load 1 G, 1-800 Hz sinusoidal in all directions to EN 60068-2-36

EMC performance

Emission EN 50081-1 (Light industry)

Immunity EN 50082-2 (Industry)

2.5.4 Safety barrier (ia) DN

≥≥

≥ 350

Application For use together with MAG 5000 and 6000 19" insert to clean the electrodes

on MAG 1100, MAG 3100 or MAG 5100 W.

NB Must not be used with intrinsically safe systems

Cleaning voltage (unloaded)

a.c. cleaning 60 V a.c. d.c. cleaning 30 V d.c.

Cleaning period 60 sec. + 60 sec. pause period Relay Switch relay activated when cleaning is in progress

Load 42 V/2 A

Operation

Automatic Yes Manual No

Indicator lamps LEDs: "ON" and "CLEANING" Supply voltage and 115-230 V a.c. +10% to −15%, 50-60 Hz, 7 VA cleaning, 5 VA stand by power consumption Ambient temperature During operation: −20 to +50°C

During storage: −20 to +70°C

19" insert

Enclosure material Standard 19" insert in aluminium/steel (DIN 41494)

Width: 21 TE

Height: 3 HE Enclosure rating IP 20 to EN 60529 and DIN 40050 Mechanical load 1 G, 1-800 Hz sinusoidal in all directions to EN 60068-2-36

2.5.5 Cleaning unit

Page 16

16 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



MAG 5000 or MAG 6000 used with MAG 3100 W or MAG 1100 PFA2.6

Meter uncertainty

V: Actual flow velocity [m/s] E: Meter uncertainty as a percentage of actual flow

MAG 6000 used with MAG 3100, MAG 1100 Ceramic or MAG 5100 W

V: Actual flow velocity [m/s] E: Meter uncertainty as a percentage of actual flow

Reference conditions (ISO 9104 and DIN/EN 29104)

Temperature of medium 20°C ±5 K Ambient temperature 20°C ±5 K Supply voltage Un ±1% Warming-up time 30 minutes Incorporation in pipe section Inlet section 10×DN (DN ≤ 1200), 5×DN (DN > 1200)

Outlet section 5×DN (DN ≤ 1200), 3×DN (DN > 1200)

Flow conditions Fully developed flow profile

Additions in the event of deviations from reference conditions

Current output As pulse output ±(0.1% of actual flow +0.05% FSO) Effect of ambient temperature Display/frequency/pulse output: < ±0.003% / K act.

Current output: < ±0.005% / K act. Effect of supply voltage < 0.005% of measuring value on 1% change Repeatability ±0.1% of actual flow for V ≥ 0.5 m/s

Page 17

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

2. Technical data

Technical data

2.7 Output characteristics MAG 5000 and MAG 6000

Output characteristics Bidirectional mode Unidirectional mode 0-20 mA

4-20 mA

Frequency

Pulse output

Relay

Power down Active

Error relay No error Error

Limit switch or 1 set point 2 set points direction switch

Low flow Intermediate flow (Reverse flow) High flow High flow/ (Forward flow) Low flow

Batch on digital output

Batch on relay Hold Batch

Page 18

18 DKFD.PS.027.W3.02

2. Technical data

Technical data

SITRANS F M MAGFLO



Coil cable Electrode cable

Basic data No. of conductors 2 3

Min. sqr. area 0.5 mm

0.2 mm

Screen Yes Yes Max. capacitance N.A. 350 pF/m

Max. cable loop Media temperature: < 100°C 40 Ω N.A. resistance < 200°C6 Ω N.A.

2.8.1 Sensor cables and conductivity of medium

Conductivity of Compact installation: medium Liquids with an electrical conductivity ≥ 5 µS/cm.

For a conductivity between 5 and 10 µS/cm, the repeatability may degrade to ±0.5% of actual flow.

Remote installation:

Standard cable

Note

For detection of empty sensor the min. conductivity must always be

≥ 20 µS/cm and the max. length

of electrode cable when remote mounted is 50 metres. Special cable must be used. For remote mounting in Ex applications special cable cannot be used, empty sensor cannot be detected and the electrically conductivity must be

≥ 30 µS/cm.

For remote mounted CT installations the max. cable length is 200 metres.

2.8.2 Minimum accept data for cable

2.9 HART





communication

add-on module

Application MAG 6000, MAG 6000 CT

Optional available as factory mounted in MAG 5000

Communication standard Bell 202 frequency shift keying (f.s.k.) standard Communication modes • Single loop mode

• Multi-drop mode, 15 slave devices

Communicator Rosemount Hand-held communicator type 275

Cable specification

Communication mode /

Single loop

Q [mm2] CU ≥ 0.2 mm2/AWG 24 Screen Yes (Overall screen) Loop resistance

Min.

230 Ω

Max.

800 Ω

Cable capacity ≤ 400 pF/m Cable length 1500 m Twisted pair Yes

HART is a registered trademark of the HART Communication Foundation.

2.10 Cable data (Supplied by Siemens Flow Instruments)

Standard cable Special cable (electrode/coil) (electrode)

Basic data No. of conductors 3 3

Sqr. area 1.5 mm

0.25 mm

Screen Yes Double Color code Brown, blue, black Brown, blue, black Outside color Grey Grey Ext. diameter 7.8 mm 8.1 mm Conductor Flexible CU Flexible CU Isolation material PVC PVC

Amb. temperature • Flexible installation −5 to 70°C −5 to 70°C

• Non flexible installation −30 to 70°C −30 to 70°C

Cable parameter Capacity 161.50 pF/m N.A.

Inductance 0.583 µH/m N.A. L/R 43.83 µH/Ω N.A.

Special cable

Page 19

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

3. Project guidance

3.1 Sizing table (DN 6 to DN 2000)

The table shows the relationship between flow velocity V, flow quantity Q and sensor dimension DN.

Guidelines for selection of sensor

Min. measuring range: 0-0.25 m/s Max. measuring range: 0-10 m/s Normally the sensor is selected so that V lies within the measuring range 1-2 m/s.

Flow velocity calculation formula:

V =

1273.24 x Q [l/s] [m/s]

[mm]

or V =

[m/s]

DN2 [mm]

353.68 x Q [m

/h]

Page 20

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

3.2.1 Minimum conductivity

Applications Min. conductivity Compact mounted 5 µS/cm Remote mounted 5 µS/cm With empty pipe detection 20 µS/cm Ex-installations

(Remote mounted only)

30 µS/cm

District heating systems

(Without DC cleaning unit)

250 µS/cm

3.2.2 Liner selection guide

Liner Applications Ceramics Al2O

General purpose, agressive chemicals

PFA General purpose, dairy, food and beverage Neoprene General purpose, sewage EPDM Drinking water, sea water PTFE Agressive chemicals, paper and pulp, high temperature applica-

tions

Linatex





Abrasive media and mining slurries

Ebonite Drinking water

3.2.3 Electrode selection guide

Electrodes Applications AISI 316 Ti General purpose, water, sewage and district heating AISI 316 Ti Ceramic coated High content of fibres, paper pulp Hastelloy C-276 Good chemical proporties, sea water Titanium Chlorine, chlorite, nitric and chromic acids

Textile bleaching industry

Tantalum Almost any acid solution Platinum and platinum/irridium The ultimate electrode material. Unaffected by most liquids

3.3 Installation conditions

Reading and operating the flowmeter is possible under almost any installation conditions because the display can be oriented in relation to the sensor. To ensure optimum flow measurement, attention should be paid to the following:

Page 21

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

The sensor must be mounted as shown in the upper figure. Do not mount the sensor as shown in the lower figure. This will position the electrodes at the top where there is possibility for air bubbles and at the bottom where there is possibility for mud, sludge, sand etc. If using empty pipe detection, the sensor can be tilted 45°, as shown in the upper figure.

Recommended installation is in a vertical/inclined pipe to minimize the wear and deposits in the sensor.

Installation in horizontal pipes

Measuring abrasive liquids and liquids containing particles

The sensor must always be completely full with liquid.

Therefore avoid:

• Installation at the highest point in the pipe system

• Installation in vertical pipes with free outlet

For partially filled pipes or pipes with downward flow and free outlet the flowmeter should be located in a U-tube.

Recommended flow direction: upwards. This minimizes the effect on the measurement of any gas/air bubbles in the liquid.

Installation in vertical pipes

3.3 Installation conditions

(continued)

Page 22

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

To achieve accurate flow measurement it is essential to have straight lengths of inlet and outlet pipes and a certain distance between pumps and valves. It is also important to centre the flowmeter in relation to pipe flanges and gaskets.

The electrical potential of the liquid must always be equal to the electrical potential of the sensor. This can be achieved in different ways depending on the application: A. Wire jumper between sensor and adjacent

flanges. (MAG 1100 and MAG 3100).

B. Direct metallic contact between sensor and

fittings. (MAG 1100 FOOD).

C. Built-in earthing electrodes. (MAG 3100 and

MAG 3100 W).

D. Optional earthing/protection flanges/rings.

(MAG 1100 and MAG 3100).

E. Optional graphite gaskets on MAG 1100.

(Standard for MAG 1100 High temperature).

Inlet and outlet conditions

Potential equalization

Avoid a vacuum in the measuring pipe, since this can damage certain liners. See "Technical data", chapter 2.

The flowmeter can be installed between two reducers (e.g. DIN 28545). Assuming that at 8° the following pressure drop curve applies. The curves are applicable to water.

Example:

A flow velocity of 3 m/s (V) in a sensor with a diameter reduction from DN 100 to DN 80 (d

1/d2

= 0.8) gives a pressure drop of 2.9 mbar.

Vacuum

Installation in large pipes

Page 23

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

The sensor and signal converter can be installed either compact or remote.

With compact installation the temperature of medium must be according to the graph.

With remote installation, the cable length and type described under "Technical data", chapter 2 must be used.

Compact/remote installation

IP 68 applications only

If the sensor is buried or permanently submerged, the terminal box must be encapsulated with silicon dielectric gel.

Mix the two components well and pour the contents into the terminal box. The material is a non-toxic, transparent, selfhealing gel which cures in approx. 24 hours. The gel can be penetrated with test instruments or be removed in case of cable replacement.

Horizontal installation

Vertical installation

Suggestions for the direct burial of MAG 3100 & MAG 5100 W sensors

If MAG 3100 or MAG 5100 W sensors are buried directly into the ground we would suggest the following precautions are observed.

The SENSORPROM



unit should be removed from the terminal box on the sensor and relocated in the signal converter remote mounting prior to burying the sensor. (See product manual LS.27.V2.02).

All the sensor data plate information and serial number should be recorded for each sensor prior to burying. This will ensure correct matching with the SENSORPROM unit.

The sensor should be potted to IP 68 and suitable coil and electrode cables used prior to burying.

The use of pea gravel at least 300 mm all around the sensor. This provides some drainage and also avoids caking the sensor with earth. It also helps located the sensor should excavation take place.

Before covering the pea gravel with earth we suggest the use of electrical cable identification tape laid above the gravel.

The sensor should not be subject to heavy vehicles applying excessive weight above the sensor or pipeline.

Page 24

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

The Siemens Flow Instruments cleaning unit can be used with MAG 5000 or 6000 in 19" insert version. The cleaning unit can be used in applications where the liner material and subsequently the electrodes may be coated with deposits. If the coating is electrically insulating, the electrode signal will be reduced. If the coating is electrically conductive, the electrode signal will be partly shortcircuited and in both cases the accuracy of the meter will decrease (dependent on the type and thickness of the coating).

Note

The cleaning unit cannot be used for inflammable or explosive media! Empty pipe detection and cleaning facility cannot be used at the same time.

The cleaning unit cleans the electrodes electro-chemically by applying a voltage to the electrodes for approx. 60 sec. While cleaning, the signal converter stores and holds the latest measured flow reading on the display and also the signal outputs. After an additional pausing period of 60 sec. the flowmeter resumes normal measurement and the cleaning is now completed.

The relay in the signal converter activates the cleaning cycle. In the relay output menu (under cleaning) the cleaning interval can be set between 1 hour and 24 hours.

Cleaning should only take place with liquid in the pipe. This can be detected via the empty pipe function. It is therefore recommended to select “empty pipe detection” ON when using the cleaning unit.

The cleaning sequence can also be controlled manually through the electrical input of the signal converter. Before this is done, ensure that the measuring pipe is full.

Mode of operation

3.4 Cleaning unit

AC-cleaning

DC-cleaning

AC-cleaning is used to remove fatty deposits on the electrodes. These fatty deposits are seen in waste water applications, in abbatoirs and water applications with oil residuals. During the cleaning process, the surface of the electrodes get warmer, which tends to soften grease particles and the gas bubbles generated mechanically lift deposits away from the surface of the electrodes.

DC-cleaning is used to eliminate electrically conductive deposits in the measuring pipe influencing the measuring accuracy. Particularly in district heating applications an electrically conductive deposit (magnetite) may occur and short-circuit the electrode signal. In this case the accuracy of the meter decreases and the signal/ noise conditions of the meter become inferior. The problem only arises if the conductivity of the water is less than approx. 250 µS/cm.

During DC-cleaning, electrolysis takes place where the flow of electrons removes the particle deposits from the electrode area.

Note Do not use DC-cleaning on sensors with tantalum electrodes.

Page 25

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

A signal converter can be supplied in a version tested and approved for custody transfer (CT ). The internal counter can accordingly be used for charging. This requires verification, sealing and setting of the signal converter together with the sensor for a specific flow range. After sealing the data on the signal converter must not be changed.

The sealing of the signal converter is done by placing sealing marks on the signal converter and on the connection plate in the terminal box.

3.5 Custody transfer approval

3.6 Signal converter MAG 5000 CT, MAG 6000 CT

Sealing

The final sealing should be carried out as shown:

MAG 6000 CT is installed like a standard MAG 6000 except for the final sealing. Calibration sealing has been carried out at calibration.

Page 26

SITRANS F M MAGFLO



3. Project guidance

DKFD.PS.027.W3.02

Project guidance

Signal converters

The signal converter can be one of the following types:

MAG 5000/6000 19” with safety barrier (ia/ib) for separate mounting in safe area

Approval [EEx ia/ib] llB. The safety barrier is to be used with sensors MAG 1100 Ex and MAG 3100 Ex, DN 6 - 300. When this safety barrier is used, the coil circuit is intrinsic safety “ib” and the electrode circuit is intrinsic safety “ia”.

MAG 5000/6000 19” with safety barrier (ia) for separate mounting in safe area

Approval [EEx ia] llC. The safety barrier is to be used with sensors MAG 3100 Ex, DN 350 - 2000. When the safety barrier is used, the coil circuit is increased safety “e” and the electrode circuit is intrinsic safety “ia”.

Sensors

The sensors can be one of the following type.

MAG 1100 Ex for mounting in Ex areas

Approval EEx ia/ib llB T4...T6. DEMKO no. 97D.121909X. DN 6 - 100.

MAG 3100 Ex for mounting in Ex areas

The sensor carries the approval: DN 15 - 25 EEx ia/ib llB T4...T6, DEMKO no. 98E.123914X DN 40 - 300 EEx ia/ib llB T4...T6, DEMKO no. 98E.123915X DN 350 - 2000 EEx e ia llC T3...T6, SIRA no. Ex 92C3107X.

The electrode circuit in the sensors is manufactured to an intrinsically safe category “ia” and the coil circuit to an intrinsically safe category “ib”, achieved by an integrated and patented protection circuit. For DN 350 - 2000 the coil circuit is increased safety “e”.

Marking

The marking has the following meaning according to European Norm EN 50014.

E: Certified to CENELEC standard.

Ex: Designates explosion proof material and indicates that the apparatus has been approved

in accordance with a certificate issued.

i: “Intrinsic safety” is a protection ensuring that the energy in the electric circuit is too small to ignite

the explosive atmosphere. There are two categories of intrinsic safety: “ia” and “ib”.

ia: In intrinsic safety category “ia”, the circuit must remain safe, even in the event of two

simultaneous errors occurring that are independent of one another.

ib: In intrinsic safety category “ib” the circuit must remain safe if an error occurs.

d: The enclosure of the of the signal converter is so strong that it can resist an explosion in-

side the enclosure. The enclosure is dimensioned in a way so that an explosion will not effect the surroundings.

e: “Increased safety” is a constructional safeguard which ensures the apparatus does not

contain normally arcing or sparking devices, or hot surfaces that will cause ignition.

ll: Designates that the apparatus may be used in all areas (Except mining).

B: Indicates the gas group in which the unit may be used.

T4...T6 The temperature class describes the maximum temperature which any exposed surface of the equipment may reach. The sensor can have temperature class T3, T4, T5 or T6 depending on the temperature of the media. Please see technical data for the sensor.

T3: Max. surface temperature 200 °C. => (Max. media temperature 180 °C). T4: Max. surface temperature 135 °C. => (Max. media temperature 120 °C). T5: Max. surface temperature 100 °C. => (Max. media temperature 90 °C). T6: Max. surface temperature 85 °C. => (Max. media temperature 75 °C).

3.7 Ex installations

Page 27

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

MAG 1100, compact/separate4. Dimensions and

weight

4.1 Sensor MAG 1100

DN A1)B1)A1B

DDiD

DGWeight2)

(Al2O3) (PFA)

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

6 156 181 309 334 48.3 6 17.3 34 2.2 10 156 181 309 334 48.3 10 10 13.6 34 2.2 15 156 181 309 334 48.3 15 16 17.3 40 2.2 25 164 196 317 349 63.4 25 26 28.5 56 2.7 40 176 218 329 371 84.0 40 38 43.4 75 3.4 50 184 235 337 388 101.6 50 50 54.5 90 4.2 65 194 254 347 407 120.0 65 66 68.0 112 5.5 80 200 266 353 419 133.0 80 81 82.5 124 7.0

100 213 292 366 445 159.0 100 100 107.1 150 10.0

) 13 mm shorter when the AISI terminal box is used. (Ex and high temperature 200°C).

) With signal converter MAG 5000 or MAG 6000 installed, weight is increased by approx. 0.8 kg.

The total built-in length "L" [mm] before assembling depends on the gasket selected.

DN EPDM Graphite PTFE(Teflon) Without gasket Earthing ring

6 64 66 70 64 77 10 64 66 70 64 77 15 65 66 70 64 77 25 80 81 85 79 92 40 95 96 100 94 107 50 105 106 110 104 117 65 130 131 135 129 142 80 155 156 160 154 167

100 185 186 190 184 197

The MAG 1100 DN 6 and DN 10 are prepared for assembly with the 1/2" pipe connection.

The length "L" varies dependent on the gasket choice:

Without gasket EPDM Graphite Teflon

L [mm] 150 150 152 156

Page 28

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

4.2 Sensor MAG 1100 FOOD

MAG 1100 FOOD, compact and separate

DN L A A

BB1DDiD

Weight 1)

(Al2O3) (PFA)

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[mm

]]

]

[[

[kg

]]

]

10 64 156 309 188.0 341.0 64.0 10 10 2.2 15 64 156 309 188.0 341.0 64.0 15 16 2.2 25 79 164 317 202.8 355.8 77.5 25 26 2.7 40 94 176 329 221.5 374.5 91.0 40 38 3.4 50 104 184 337 243.5 396.5 119.0 50 50 4.2 65 131 194 347 259.0 412.0 130.0 65 66 5.5 80 156 200 353 277.5 430.5 155.0 80 81 7.0

100 186 213 366 304.5 457.5 183.0 100 100 10.0

) With signal converter MAG 5000 or MAG 6000 installed, weight is increased by approx. 0.8 kg.

Built-in length

DN A L 1)

[mm] [mm]

10 99 146 15 99 146 25 113 161 40 126 176 50 154 186 65 165 223 80 200 258

100 225 288

) The total built-in length "L" is independent of the

adapter type selected.

Page 29

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

Accessories MAG 1100 FOOD

Weld-in type

DIN 11850 DS/ISO 2037 SMS 3008 BS4825-1 Tri-Clover

Di Do Di Do Di Do Di Do Di Do

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

10 10 40 10.0 13.0 10.0 13.0 10.0 13.0 10.0 13.0 9.4 12.7 15 15 40 16.0 19.0 16.0 19.0 16.0 19.0 16.0 19.0 - -

15.9 15 40 --------15.75 19.05 20 15 40 20.0 23.0 20.0 23.0 20.0 23.0 20.0 23.0 - -

25 25 40 - - 22.6 25.6 22.6 25.6 22.6 25.6 22.1 25.4 25 25 40 26.0 29.0 - - - - - - - -

28 25 40 - - 25.6 28.6 - - - - - 322540----29.6 32.0 - - - 32 25 40 32.0 35.0 - - - - - - - -

33.7 25 40 - - 31.3 34.3 31.3 34.3 - - - 38 40 40 - - 35.6 38.6 35.6 38.6 35.6 38.6 34.8 38.1 40 40 40 - - 37.6 40.6 - - - - - -

40 40 40 38.0 40.0 - - - - - - - 50 50 40 - - 48.6 51.6 48.6 51.6 48.6 51.6 47.5 50.8 50 50 40 50.0 53.0 - - - - - - - -

63.5 65 45 - - 60.3 64.1 60.3 64.1 60.3 64.1 60.2 63.5 65 65 45 66.0 70.0 - - - - - - - 70 65 45 - - 66.8 70.6 - - - - - -

766545----72.0 76.0 - - - -

76.1 80 50 - - 72.9 76.7 72.9 76.7 72.9 76.7 72.9 76.2 80 80 50 81.0 85.0 - - - - - - - -

88.9 80 50 - - 84.9 89.8 84.9 89.8 - - - 100 100 50 100 104 - - - - - - - -

101.6 100 50 - - 97.6 102.5 97.6 102.5 97.6 102.6 97.38 101.6

114.3 100 50 - - 110.3 115.6 110.3 115.6 110.3 115.6 - -

Adapter

Sensor

Clamp type

DIN 32676 ISO 2852 SMS 3016 BS4825-3 Tri-Clamp

Di Do Di Do Di Do Di Do Di Do

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

10 10 40 10.0 34.0 10.0 34.0 10.0 34.0 - - 9.4 25.0 15 15 40 16.0 34.0 16.0 34.0 16.0 34.0 - - 15.75 25.0 20 15 40 20.0 34.0 20.0 34.0 - - - - - -

25 25 40 - - 22.6 50.5 22.6 50.5 22.6 50.5 22.1 50.5 25 25 40 26.0 50.5 26.0 50.5 - - - - - -

33.7 25 40 31.3 50.5 31.3 50.5 31.3 50.5 - - - 38 40 40 - - 35.6 50.5 35.6 50.5 35.6 50.5 34.8 50.5

40 40 40 38.0 50.5 38.0 50.5 - - - - - 50 50 40 50.0 64.0 - - - - - - - -

51 50 40 48.6 64.0 48.6 64.0 48.6 64.0 47.5 64.0

63.5 65 45 - - 60.3 77.5 60.3 77.5 60.3 77.5 60.2 77.5 65 65 45 66.0 91.0 - - - - - - - -

76.1 80 50 - - 72.9 91.0 72.9 91.0 72.9 91.0 72.9 91.0 80 80 50 81.0 106.0 - - - - - - - -

100 100 50 100 119.9 - - - - - - - -

101.6 100 50 - - 97.6 119.0 97.6 119.0 97.6 119.0 97.38 119.0

Adapter

Sensor

Tri-Clover and Tri-Clamp are registered trademarks for Ladish Co.

Page 30

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

Accessories MAG 1100 FOOD

(continued)

Threaded type

DIN 11851

Di Do

[mm] [mm] [mm] [mm] [mm]

10 10 40 10.0 28.0 15 15 40 16.0 34.0 20 15 40 20.0 44.0

25 25 40 26.0 52.0 32 25 40 32.0 58.0 40 40 40 38.0 65.0 50 50 40 50.0 78.0 65 65 45 66.0 95.0 80 80 50 81.0 110.0

100 100 50 100.0 130.0

Adapter

Sensor

Threaded type

ISO 2853 SS 3351 BS 4825-4 (IDF)

Di Do Di Do Di Do

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

25 25 40 22.6 37.0 22.6 37.0 22.6 37.0 38 40 40 35.6 51.0 35.6 51.0 35.6 51.0 51 50 40 48.6 64.0 48.6 64.0 48.6 64.0

63.5 65 45 60.3 78.0 60.3 78.0 60.3 78.0

76.1 80 50 72.9 91.0 72.9 91.0 72.9 91.0

101.6 100 50 - - - - 97.6 126.0

101.6 100 50 97.6 118.0 97.6 118.0 - -

Adapter

Threaded type

SMS 1145

Di Do

[mm] [mm] [mm] [mm] [mm]

25 25 40 22.6 40.0 32 25 40 29.6 48.0 38 40 40 35.6 60.0

51 50 40 48.6 70.0

63.5 65 45 60.3 85.0 76 65 45 72.0 98.0

Adapter

Sensor

Page 31

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

mm inch mm inch mm inch mm inch mm inch mm inch mm inch 25 1" 187 7.4 N/A N/A N/A N/A 200 7.9 200 7.9 N/A N/A 40 1½” 197 7.8 N/A N/A N/A N/A 200 7.9 200 7.9 N/A N/A 50 2" 188 7.4 N/A N/A 200 7.9 N/A N/A 200 7.9 N/A N/A 65 2½” 194 7.6 N/A N/A 200 7.9 N/A N/A 200 7.9 N/A N/A 80 3" 200 7.9 N/A N/A 200 7.9 N/A N/A 200 7.9 N/A N/A 100 4" 207 8.1 N/A N/A 250 9.8 N/A N/A 250 9.8 N/A N/A 125 5" 217 8.5 N/A N/A 250 9.8 N/A N/A 250 9.8 N/A N/A 150 6" 232 9.1 N/A N/A 300 11.8 N/A N/A 300 11.8 N/A N/A 200 8" 257 10.1 350 13.8 350 13.8 N/A N/A 350 13.8 N/A N/A 250 10" 284 11.2 450 17.7 450 17.7 N/A N/A 450 17.7 N/A N/A 300 12" 310 12.2 500 19.7 500 19.7 N/A N/A 500 19.7 N/A N/A 350 14" 362 14.3 550 21.7 550 21.7 N/A N/A 550 21.7 N/A N/A 400 16" 387 15.2 600 23.6 600 23.6 N/A N/A 600 23.6 N/A N/A 450 18" 418 16.5 600 23.6 600 23.6 N/A N/A 600 23.6 N/A N/A 500 20" 443 17.4 625 24.6 625 24.6 N/A N/A 680 26.8 N/A N/A 600 24" 494 19.4 750 29.5 750 29.5 N/A N/A 820 32.3 N/A N/A 700 28" 544 21.4 875 34.4 875 34.4 N/A N/A N/A N/A 875 34.4 750 30" 571 22.5 N/A N/A N/A N/A N/A N/A N/A N/A 937 36.9 800 32" 606 23.9 1000 39.4 1000 39.4 N/A N/A N/A N/A 1000 39.4 900 36" 653 25.7 1125 44.3 1125 44.3 N/A N/A N/A N/A 1125 44.3 1000 40" 704 27.7 1250 49.2 1250 49.2 N/A N/A N/A N/A 1250 49.2 42" 704 27.7 N/A N/A N/A N/A N/A N/A N/A N/A 1250 49.2 1100 44" 755 29.7 N/A N/A N/A N/A N/A N/A N/A N/A 1375 54.1 1200 48" 810 31.9 1500 59.1 1500 59.1 N/A N/A N/A N/A 1500 59.1

4.3 Sensor MAG 5100 W

Dimensions

AWWA

Nominal

size

PN 10 PN 16 PN 40 Class 150

Page 32

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

mm inch kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs 25 1" N/A N/A N/A N/A 4 9 4 9 N/A N/A 40 1½” N/A N/A N/A N/A 7 15 6 13 N/A N/A 50 2" N/A N/A 9 20 N/A N/A 8 20 N/A N/A 65 2½” N/A N/A 10.7 24 N/A N/A 11 24 N/A N/A 80 3" N/A N/A 11.6 26 N/A N/A 13 28 N/A N/A 100 4" N/A N/A 15.2 33 N/A N/A 19 41 N/A N/A 125 5" N/A N/A 20.4 45 N/A N/A 24 52 N/A N/A 150 6" N/A N/A 26 57 N/A N/A 29 64 N/A N/A 200 8" 48 106 48 106 N/A N/A 56 124 N/A N/A 250 10" 64 141 69 152 N/A N/A 79 174 N/A N/A 300 12" 76 167 86 189 N/A N/A 110 243 N/A N/A 350 14" 100 220 116 255 N/A N/A 131 289 N/A N/A 400 16" 127 280 144 317 N/A N/A 165 364 N/A N/A 450 18" 152 335 178 393 N/A N/A 176 388 N/A N/A 500 20" 184 405 232 512 N/A N/A 235 518 N/A N/A 600 24" 258 568 343 736 N/A N/A 345 761 N/A N/A 700 28" 315 693 350 772 N/A N/A N/A N/A 309 681 750 30" N/A N/A N/A N/A N/A N/A N/A N/A 480 1058 800 32" 410 904 442 975 N/A N/A N/A N/A 421 928 900 36" 512 1129 550 1213 N/A N/A N/A N/A 539 1188 1000 40" 650 1433 732 1614 N/A N/A N/A N/A 670 1477 42" N/A N/A N/A N/A N/A N/A N/A N/A 700 1544 1100 44" N/A N/A N/A N/A N/A N/A N/A N/A 1100 2426 1200 48" 990 2183 1106 2439 N/A N/A N/A N/A 1030 2271

AWWA

Nominal size

PN 10 PN 16 PN 40 Class 150

MAG 5100 W weight

The effect of temperature on working pressure MAG 5100 W

Metric (Pressures in bar) Sizes 25 mm, 40 mm & > 600 mm Flange spec. Flange Temperature

°°

°C

rating −510 5090 EN 1092-1 PN 10 10.0 10.0 9.7 9.4 PN 16 16.0 16.0 15.5 15.1 PN 40 40.0 40.0 38.7 37.7 ANSI B16.45 150 lb 19.7 19.7 19.3 18.0 AWWA C-207 Class D 10.3 10.3 10.3 10.3

Sizes 50 mm to 600 mm

EN 1092-1 PN 10 10.0 10.0 10.0 8.2 PN 16 10.0 16.0 16.0 13.2 PN 40 10.0 40.0 40.0 32.9 ANSI B16.45 150 lb 10.0 19.7 19.7 16.2

Imperial (Pressures in Psi) Sizes 1", 1½”, & > 24" Flange spec. Flange Temperature

°°

°F

rating 23 50 120 200 EN 1092-1 PN 10 145 145 141 136 PN 16 232 232 225 219 PN 40 580 580 561 547 ANSI B16.45 150 lb 286 286 280 261 AWWA C-207 Class D 150 150 150 150

Sizes 2" to 24"

EN 1092-1 PN 10 145 145 145 119 PN 16 145 232 232 191 PN 40 145 580 580 477 ANSI B16.45 150 lb 145 286 286 235

Page 33

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

DN A

AS T

2129 E, AWWA AS 4087 C -207

PN PN PN PN PN Class Class Class Class

6, 25 40 64 100 150 300 14- D

10, 21-

16 35

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

15 187 338 59 104 200 200 200 - - 200 200 200 - 6 4 25 187 338 59 104 200 200 200 - 260 200 200 200 1.2 6 5 40 197 348 82 124 200 200 200 - 280 200 200 200 1.2 6 8 50 205 356 72 139 200 200 200 276 300 200 200 200 1.2 6 9 65 212 363 72 154 200 200 200 320 350 200 272 200 1.2 6 11

80 222 373 72 174 200 272 272 323 340 272 272 200 1.2 6 12 100 242 393 85 214 250 250 250 380 400 250 310 250 1.2 6 16 125 255 406 85 239 250 250 250 420 450 250 335 250 1.2 6 19 150 276 427 85 282 300 300 300 415 450 300 300 300 1.2 6 27 200 304 455 137 338 350 350 350 480 530 350 350 350 1.2 8 40 250 332 483 137 393 450 450 450 550 620 450 450 450 1.2 8 60 300 357 508 137 444 500 500 500 600 680 500 500 500 1.6 8 80 350 362 513 270 462 550 550 550 700 800 550 550 550 - 1.6 8 110 400 387 538 270 512 600 600 600 750 - 600 600 600 - 1.6 10 125 450 418 569 310 563 600 600 600 - - 600 640 600 - 1.6 10 175 500 443 594 350 614 625 625 680 - - 680 730 625 - 1.6 10 200 600 494 645 430 715 750 750 750 - - 820 860 750 - 1.6 10 300 700 544 695 500 816 875 - - - - - - 875 875 2.0 - 350 750 571 722 556 869 - - - - - - - 937 937 2.0 - 380 800 606 757 560 939 1000 - - - - - - 1000 1000 2.0 - 475 900 653 804 630 1042 1125 - - - - - - 1125 1125 2.0 - 560

1000 704 906 670 1146 1250 - - - - - - 1250 1250 2.0 - 700 1100 755 906 770 1248 1375 - - - - - - - - 2.0 - 1200 1200 810 961 792 1348 1500 - - - - - - 1500 1500 2.0 - 1250 1400 925 1076 1000 1675 1750 - - - - - - - - 3.0 - 1753 1500 972 1123 1020 1672 - - - - - - - 1875 1875 3.0 - 2600 1600 1025 1176 1130 1915 2000 - - - - - - - - 3.0 - 2341 1800 1123 1274 1250 1974 2250 - - - - - - - - 3.0 - 3253 2000 1223 1374 1375 2174 2500 - - - - - - - - 3.0 - 4060

4.4 Sensor MAG 3100 and MAG 3100 W

MAG 3100 & MAG 3100 W, compact/separate

) 13 mm shorter with AISI terminal box (Ex and high temperature)

) When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length

)TC = Type C grounding ring, TE = Type E grounding ring

) Weights are approx. and for PN 16 without signal converter

D = Outside diameter of flange, see flange tables

Weight

EN 1092-1-2001

BS 1560/ ANSI 16.5

Page 34

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

4.5 Signal converter

Signal converter installed in compact mode

Weight: MAG 6000 and MAG 5000: 0.75 kg

Weight: Wall bracket: 0.9 kg

Signal converter installed remote

19"insert, standard unit

Weight incl. back print:

MAG 5000: 0.8 kg MAG 6000: 0.8 kg Safety barrier (ia/ib): 1.0 kg Safety barrier (ia): 0.8 kg Cleaning unit: 0.9 kg

Compact polyamide

Earthing/protection flange

Weight

[mm] [mm] [kg]

25-250 1.2 15 0.03-0.4 300-600 1.6 20 0.6-2.6 700-1200 2.0 25 3-5 1400-2000 3.0 40 9-16

Weight

[mm] [kg]

15 6 0.07

25-150 6 0.3-1.4 200-350 8 1.7-4.1 400-600 10 6.5-13.0

Type C flanges for liners of neoprene, EPDM, Linatex and ebonite. Type E flanges for liners of PTFE.

Note

MAG 3100 high temperature (PTFE) is always equipped with 2 pcs. type E earthing flanges.

Page 35

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

Wall mounting box 21 TE

Weight excl. signal converter: 2.3 kg

Wall mounting box 42 TE

Weight excl. signal converter: 2.9 kg

Panel front unit 21 TE

Weight excl. signal converter: 1.2 kg

Page 36

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

4. Dimensions and weight

D & W

Back of panel unit 21 TE

Back of panel unit 42 TE

Weight: 0.9 kg

Weight: 0.7 kg

Panel front unit 42 TE

Weight excl. signal converter: 1.6 kg

Page 37

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



5. Installation of sensor

Sensor

To obtain optimum results from the measuring system, the chassis body of the sensor must have the same electrical potential as the liquid being measured.

5. Installation of sensor

5.1 Potential equalization

MAG 1100

Graphite gaskets EPDM or PTFE gaskets

Electrically conductive piping

A: Potential equalization with electri-

cally conductive graphite gaskets

B: Potential equalization using earth

strap supplied.

C: Potential equalization with electri-

cally conductive graphite gaskets

D: Potential equalization using sepa-

rate potential equalization ring

Electrically non-conductive piping

MAG 1100 FOOD

The sensor must be installed between two adapters. Potential equalization with the liquid occurs automatically via these adapters and through the adjacent pipe.

MAG 3100 W / MAG 3100 (except PTFE liner)

Potential equalization is carried out with the built-in earthing electrodes. No further action need to be taken.

Page 38

38 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



5. Installation of sensor

Sensor

MAG 3100 (PTFE liner)

Electrically conductive piping

Use an earth straps on one side.

Potential equalization, electrically conductive pipe

Non-conductive piping

Use an earthing flange. Place the flange between flowmeter and the adjacent pipe flange. Selection of earthing flange depends on the medium, liner material and application, see figure.

Special attention must be given to systems with cathodic protection.

Compact installation:

The signal converter must be supplied through an isolation transformer. The terminal "PE" must never be connected.

Remote installation:

The screen must only be connected at the sensor end via a 1.5 µF condensator. The screen must never be connected at both ends.

Isolated sensor:

If above mentioned connections are unacceptable, the sensor must be isolated from the pipe work.

Liner Suitable

material earthing flange

PTFE Type E

Type of earthing flange depending on liner material

With abrasive liquids, flowmeter inlet protection may be necessary. Here type C and E earthing flanges are used. Type C (for all liners except PTFE) is clamped between the flanges. Type E (for PTFE liner only) is fitted to the flange. When using an earthing flange, gaskets must always be used between the adjacent pipe flange and the earthing flange.

5.2 Inlet protection MAG 3100

5.3 Cathodic protected piping

Page 39

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6. Installation of signal converter

6.1

Compact installation MAG 5000 and MAG 6000

Compact polyamide

Step 1

Remove and discard the terminal box lid of the sensor.

Fit the PG 13.5 cable glands for the supply and output cables.

Step 2

Remove the two black plug assemblies for coil and electrode cables in the terminal box and connect them to their corresponding terminal numbers on the connection board.

Step 3

Connect an earth wire between PE on connection board and bottom of connection box. Connect the 2 pin connector and 3 pin connector as shown.

Note

In earlier version the 3 pin connector was a 5 pin connector.

Step 4

Mount the connection plate in the terminal box. The SENSORPROM

unit connections will be established automatically when the connection plate is mounted in the terminal box.

Note

Check that your connection board lines up with the SENSORPROM

unit, if not, move the SENSORPROM

unit to the other side of the

terminal box.

Step 5

Fit the supply and output cables respectively and tighten the cable glands to obtain optimum sealing. Please refer to the wiring diagram in chapter 7 for the electrical connections.

Mount the signal converter on the terminal box.

Note

System will not register flow if black plugs are not connected to connection board

Page 40

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

1. Use a screw driver to remove the outer frame.

2. Loosen the 4 screws retaining the control pad.

3. Withdraw the control pad and turn it to the required orientation.

4. Tighten the 4 screws until a mechanical stop is felt in order to obtain IP 67 enclosure rating.

5. Snap-lock the outer frame onto the control pad (click).

The signal converter can be mounted in either direction as the arrow indicates without turning the terminal box.

The terminal box can be rotated ±90° in order to optimize the viewing angle of the signal converter display/keypad: Unscrew the four screws in the bottom of the terminal box. Turn the terminal box to the required position and retighten the screws firmly.

Turning the control pad

Turning the signal converter

Page 41

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

Locate the add-on module in the bottom of the MAG 6000 signal converter.

6.2.1 Add-on modules MAG 6000 only

Press the add-on module forwards as far as possible.

The add-on module has now been installed and the signal converter is ready to be installed on the terminal box. Communication to the operator menu and electrically inputs and outputs is automatically established by power on.

6.2.2 Remote installation -

At the sensor

Fit and connect the electrode and coil cables as shown in chapter 7 “Electrical connections”. The unscreened cable ends must be kept as short as possible. The electrode cable and the coil cable must be kept separate to prevent interference. Tighten the cable glands well to obtain optimum sealing.

Remove the SENSORPROM® unit from the sensor and mount it on the connection plate in the signal converter.

Page 42

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.3 Remote installation -

Wall mounting

MAG 6000

Mount wall bracket on a wall or into the back of a panel.

Mount wall bracket on a vertical or horizontal pipe using an ordinary hose clip or a duct strap.

Vertical pipe mounting

Horizontal pipe mounting

Take the SENSORPROM® memory unit from the sensor. Mount the SENSORPROM

unit in the wall mounting unit as shown. The text on the SENSORPROM

unit must face towards the

wall bracket.

Mount an earth wire between PE on connection board and bottom of connection box.

Page 43

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.3 Remote installation -

Wall mounting

(continued)

Mount the connection plate in the terminal box. Fix the connection plate with the two diagonal opposite screws.

Fit the coil, electrode, supply and output cables respectively and tighten the cable glands to obtain optimum sealing. Please see the wiring diagram in chapter 7 for the electrical connections.

Mount the signal converter on the terminal box.

Page 44

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.4 Remote installation -

Signal converter in 19" insert

1. Fit the SENSORPROM® memory unit on the connection board supplied with the signal converter. The SENSORPROM® unit is supplied with the sensor in the terminal box.

2. Mount the guide rails into the rack system as shown. Distance between guide rails is 20 TE. Guide rails are supplied with the rack system and not with the signal converter.

3. Mount the connection board as shown.

4. Connect the cables as shown under "Electrical connection", chapter 7.

5. Insert the signal converter into the rack system.

Page 45

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

Locate the add-on module in the bottom of the MAG 6000 signal converter.

6.2.5 Add-on modules MAG 6000 only

Press the add-on module forwards as far as possible.

Page 46

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.6 Installation in IP 65 wall mounting enclosure

1. Mount the IP 65 enclosure on the wall with four screws.

2. Mount the SENSORPROM® memory unit on the connection board as shown.

The SENSORPROM® unit is supplied with the sensor in the terminal box. The connection board for IP 65 wall mounting boxes must be used.

3. Connect the cables to the terminals, see "Electrical connection", chapter 7.

4. Insert the signal converter and close the cover.

Page 47

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.7 Installation in IP 65 panel mounting enclosure (front of panel)

1. Mount the SENSORPROM

memory unit on the connection board as shown.

The SENSORPROM

unit is supplied with the sensor in the terminal box.

2. Fit the enclosure in a cut out at the front of a panel. Fasten the four screws accessible at the front.

3. Connect the cables as shown under "Electrical connection", chapter 7.

4. Insert the signal converter and close the cover.

Page 48

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.2.8 Installation into the back of a panel

1. Mount the SENSORPROM

memory unit on the connection board as shown.

The SENSORPROM

unit is supplied with the sensor in the terminal box.

2. Mount the connection board into the back of the enclosure.

3. Connect the cables as shown under "Electrical connection", chapter 7.

4. Mount the enclosure into the back of a panel with four screws.

5. Insert the signal converter.

Page 49

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.3 Signal converter

Safety barrier

1. Fit the SENSORPROM® memory unit on the connection board supplied with the safety barrier. The SENSORPROM

unit is delivered mounted in the terminal box of the sensor. The

connection board supplied with the signal converter is not used.

2. Mount the guide rails into the rack system as shown. Distance between guide rails is 20 TE. Guide rails are supplied with the rack system and not with the signal converter.

3. Mount the connection board as shown. The mounting screw must be installed just in line with the guide rails.

4. Connect the cables as shown under "Electrical connection", chapter 7.

5. Insert the signal converter and the safety barrier into the rack system.

Page 50

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

6. Installation of signal converter

Installation of signal conv.

6.4 Signal converter

Cleaning unit

1. Fit the SENSORPROM

memory unit on the connection board supplied with the cleaning unit.

The SENSORPROM

unit is delivered mounted in the terminal box of the sensor. The

connection board supplied with the signal converter is not used.

2. Mount the guide rails into the rack system as shown. Distance between guide rails is 20 TE. Guide rails are supplied with the rack system and not with the signal converter.

3. Mount the connection board as shown. The mounting screw must be installed just in line with the guide rails.

4. Connect the cables as shown under "Electrical connection", chapter 7.

5. Select AC-cleaning or DC-cleaning mode at the switch located on the base of the cleaning unit.

6. Insert the cleaning unit and the signal converter into the rack system.

Page 51

SITRANS F M MAGFLO



7. Electrical connection

DKFD.PS.027.W3.02

E. c.

7. Electrical connection

7.1 Signal converter MAG 5000 and MAG 6000 connection diagram

Grounding

PE must be connected due to safety class 1 power supply.

Mechanical counters

When mounting a mechanical counter to terminals 57 and 58 (active output), a 1000 µF capacitor must be connected to the terminals 56 and 58. Capacitor + is connected to terminal 56 and capacitor − to terminal 58.

Output cables

If long cables in noise environment, we recommend to use screened cable.

Electrodes cables

Dotted connections only to be when using special electrode cable.

Note

Special cable with individual wire shields (shown as dotted lines) are only requried when using empty pipe function or long cables. (See “Technical data” chapter 2 for further details.)

Page 52

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

7. Electrical connection

E. c.

7.2 Wiring diagram for signal converter and sensor

Compact installation

Compact

Remote IP 67 wall mounting

Remote installation

Cathodic protected piping

Compact installation:

The signal converter must be supplied through an isolation transformer. The terminal "PE" must not be connected.

Remote installation:

The screen must only be connected at the sensor end via a 1.5 µF capacitor. The screen must never be connected at both ends.

Sensor cables

• Unscreened cable ends must be as short as possible and the two cables must be kept separate. Cables must be in one length and must not be taken to a distribution box or similar terminal arrangement.

• Terminals 81 and 84 are only connected when special electrode cable with double screening is used.

• Coil cable screen must be connected in both ends. Electrode cable screen must be connected at sensor side only.

Note

See 5.3 when using cathodic protection.

Note

Mount the grounding wire from connection box to PE to ensure sufficient grounding.

Page 53

SITRANS F M MAGFLO



7. Electrical connection

DKFD.PS.027.W3.02

E. c.

19” IP 20 version

19” IP 66 version

19” IP 20 version EEx (ia/ib) DN

≤ ≤

≤

300

Page 54

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

7. Electrical connection

E. c.

19” IP 20 version EEx e (ib) DN

≥≥

≥

350

19” IP 66 version EEx (ia/ib) DN

≤ ≤

≤

300

19” IP 66 version EEx e (ib) DN

≥≥

≥

350

Page 55

SITRANS F M MAGFLO



7. Electrical connection

DKFD.PS.027.W3.02

E. c.

19” IP 20 version with cleaning

19” IP 66 version with cleaning

Page 56

56 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Communication mode Basic settings Operator active

Service mode Output Operator inactive

Operator menu External input

Product identity Sensor characteristics

Language mode Reset mode

8. Commissioning

8.1 Keypad and display layout

Keypad

The keypad is used to set the flowmeter. The function of the keys is as follows:

TOP UP KEY This key (hold 2 sec.) is used to switch between operator menu

and setup menu. In the converter setup menu, a short press will cause a return to the previous menu.

FORWARD KEY This key is used to step forward through the menus. It is the only

key normally used by the operator.

BACKWARD KEY This key is used to step backward through the menus.

CHANGE KEY This key changes the settings or numerical values.

SELECT KEY This key selects the figures to be changed.

LOCK/UNLOCK KEY This key allows the operator to change settings and gives access

to submenus.

Display

The display is alphanumerical and indicates flow values, flowmeter settings and error messages.

The upper line is for primary flow readings and will always show either flow rate, totalizer 1 or totalizer 2. The line is divided into 3 fields.

S: Sign field P: Primary field for numerical value U: Unit field

The centre line is the title line (T) with individual information according to the selected operator or setup menu.

The lowest line is the subtitle line (ST) which either will add information to the title line or keep individual information independent of the title line.

F: The alarm field. Two flashing triangles will appear by a fault condition.

M: The mode field. The symbols indicate the following.

Ready for change Access to submenu

Value locked RESET MODE: Zero setting of

totalizers and initialization of setting

L: The lock field. Indicates the function of the lock key.

Page 57

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.2 Menu build-up

The menu structure of a specific signal converter type is shown in a menu overview map. Details of how a specific parameter is set is shown in a menu detail map for the specific parameter. A detail map is valid for each type of signal converter if not indicated otherwise. The menu structure is valid for the title and subtitle line only. The upper line is for primary readings only and will always be active with either flowrate, totalizer 1 or totalizer 2.

The menu is built up in two parts. An operator menu and a setup menu.

Operator menu

The operator menu is for daily operation. The operator menu is customised in the operator menu setup. The signal converter always starts in operator menu No. 1. The page forward and page backward keys are used to step through the operator menus.

Setup menu

The setup menu is for commissioning and service only.

Access to the setup menu is gained by pressing the top up key for 2 seconds. The setup menu operates in two modes:

• View mode

• Setup mode

View mode

is a read only mode. The pre-selected settings can only be scanned.

Setup mode

is a read and write mode. The pre-selected settings can be scanned and changed.

Access to the setup mode is password protected. The factory set password is 1000.

Access to a submenu in the set up menu is gained by the lock key. A short press on a top up key will bring you back to the previous menu. A long press (2 sec.) on the top up key will exit the setup menu and bring you back to operator menu No. 1.

8.2.1 Password

The SETUP MENU can be operated in two different modes:

VIEW MODE (Read only) CHANGE MODE (Read and write mode)

Access to view mode is always gained by pressing the forward key when in the password menu.

Access to change mode is password protected. The password is factory set to 1000, but can be changed to any value between 1 and 9999 in the change password menu.

The factory setting of 1000 can be re-established as follows:

• Switch off power suppply

• Press the TOP UP key and switch on the power supply

• Release the key after ROM and RAM tests are completed

The user code is now reset to 1000.

Page 58

58 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.3.1 MAG 5000 and MAG 6000

Menu overview

Page 59

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.3.2 MAG 6000 CT

Menu overview

Page 60

60 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.4.1 Basic settings

Menu detail

Comma for flow rate, totalizer 1 and totalizer 2 can be individually positioned.

• open the respective window.

• ensure that the cursor is positioned below the comma. Use the SELECT KEY .

• move the comma to the requested position. Use the CHANGE KEY .

Units are changed by means of the CHANGE KEY with the cursor placed below the unit selected. Select units (cursor moved) by means of the SELECT KEY .

Totalizer 2 is not visible when batch is selected as digital output.

max.

2 - is only visible when it has been choosen as external input.

Main frequency

To select the main power supply frequency corresponding to the country in which the flowmeter is installed. (US = 60 Hz)

Flow direction

Select the correct flow direction in the pipe

max.

Sets the measuring range, the analog outputs and the frequency output. Value, decimal point, unit and time can be set individually (setting is dimension dependent).

max.

Sets the measuring range, the analog outputs and the frequency output. Value, decimal point, unit and time can be set individually (setting is dimension dependent). Only visible when it has been choosen as external digital input.

Totalizers

To set unit and decimal point.

Low flow cutt off

To set a % of selected Q

max.

. To filter noise in the

installation. Influences display and all outputs.

Error level

To select which error level, the flowmeter will detects an error.

Page 61

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.4.3 Digital and relay outputs

Error level

Error number

8.4.2 Outputs

Digital output Frequency Proportional to flowrate (Terminal 56, 57, 58)

The current output must be set off when not used.

Current output Proportional to flowrate (Terminal 31 and 32)

4 - 20 mA + alarm: Current output gives the following mA, depending on what is selected as error level in basic settings. Fatal: 1 mA, permanent: 2 mA, warning: 3 mA

Digital output Pulse/volume (Terminal 56, 57, 58)

Menu detail

Page 62

62 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Menu detail

Limit/direction

Limit switches are available for both digital as well as relay output.

Direction mode: 1 set point at 0% flow; hysteresis 5%. If 2 set points must activate 2 separate outputs, a single set point has to be selected individually for digital as well as relay outputs.

Batch

(MAG 6000 only)

(Possible through relay and digital output)

8.4.4 Relay outputs

Cleaning

8.4.5 External input

Batch control is available on MAG 6000 only.

The relay output must always be used to operate the cleaning unit when a cleaning unit has been installed together with the signal converter. The relay output cannot be used for other purposes.

Page 63

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Menu detail

8.4.6 Sensor characteristics

8.4.7 Reset mode

If “SENSORPROM not installed” is shown, refer to chapter 6 (depending on type of mounting configuration).

Page 64

64 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.4.8 Service mode

All previous settings are reinitialised when service mode is exited using the top up key.

The error system

The error system is divided into an error pending list and a status log list. Time is gained as days, minutes and hours since the error has occurred.

The first 9 standing errors are stored in error pending. When an error is removed it is removed from error pending.

The latest 9 errors are stored in the status log. When an error is removed it is still kept in status log. Errors in status log is stored for 180 days.

Error pending and status log are accessible when enabled in the operator menu.

Menu detail

1) Standard

2) If digital output is set to frequency

Page 65

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Menu setup

8.4.9 Operator menu setup

The upper line is always active and can never be deselected.

The two lower lines are for individual operator information. Information which the operator can scroll through with the forward key.

• A closed lock key in the operator menu setup, means that the menu is enabled when viewing the operator menu.

• An open lock key symbol, means that the menu is not available in the operator menu.

The middle line can either be used as a heading “Text line” for the lower line, or as a flow reading. A flow reading can be individually selected for each menu.

The lower line may be used for an additional flow reading to the reading already available in the upper line.

Text means that the text for the chosen measured value is shown. For example if text is chosen in line 2 and flow rate is chosen in line 3, the text “flow rate” is shown in line 2 and the measured flow rate value is show in line 3.

Page 66

66 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.4.10 Product identity

Software version of add-on module is only available if the add-on module has been installed.

Menu detail

8.4.11 Change password

Page 67

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.4.12 Language mode

Menu detail

8.4.13 HART





communication MAG 5000 HART or as add-on module

Page 68

68 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.5.3 Batch

(Only available on MAG 6000)

A batch can be started, paused or stopped from the operator menu, in addition to the externally operated batch control. The batch is controlled using the lock and the top up keys.

The lock key:

• Starts the batch

• Holds the batch (pause) when pressed during batching

• Restarts the batch to continue when pressed during a pause.

The top up key resets a batch completely during a pause.

The accumulated number of performed batches can be viewed when enabled in the operator menu setup.

The batch cycle counter is reset by pressing the lock key in the “batch cycle cnt reset” menu.

Batch cycle counter

Batch cycle counter reset

8.5.1 Flow rate

Operator menu

The 1

display line is always active and shows the value enabled in the operator menu setup.

• Flow rate

• Totalizer 1

• Totalizer 2

The 2

and 3rd display lines are individually set in the operator menu. The page forward key steps

through the enabled settings.

• Flow rate

• Totalizer

• Totalizer reset

• Batch control

• Batch cycle counter

• Batch cycle counter reset

• Pipe size

• Sensor type

• Pending errors

• Status log

• Tag No.

8.5.2 Totalizer

A totalizer is reset by pressing the lock key when the corresponding totalizer reset window is open.

Page 69

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

8.6.1 Settings available

Parameter Factory settings Settings available Password

Default value 1000 Password 1000 1000 - 9999

Basic settings

Flow direction Positive Positive, negative Q

max.

Dim. dependent Dim. dependent

- Volume units Dim. dependent m3, ml, l, kl, hl, Ml, ft3, in3, USG, USkG, USMG, UKG, UKMG

- Time units Dim. dependent Sec., min., hour, day

Totalizer 1 Forward Forward, reverse, net

- Totalizer 1 units Dim. dependent m3, ml, l, kl, hl, Ml, ft3, in3, USG, USkG, USMG, UKG, UKMG

Totalizer 2 Reverse Forward, reverse, net

- Totalizer 2 units Dim. dependent m3, ml, l, kl, hl, Ml, ft3, in3, USG, USkG, USMG, UKG, UKMG

Low flow cut-off 1.5 % 0 - 9.9 % Empty pipe Off Off, on Error level Warning Fatal, permanent, warning

Output

Current output Off On/off, uni-/bidirectional, 0/4 - 20 mA

- Time constant 5 s 0.1 - 30 s

Digital output Pulse Error, direction/limit, batch1), frequency, pulse, error no.,

off

Relay output Error Error, direction/limit, cleaning, error No., off Direction/limit switch Off 1 set point/2 set points, −100 - 100%

- Hysteresis 5% 0.0 - 100%

Batch

Off

- Batch quantity 0 Dim. dependent

- Batch compensation 0 −100 - 100 m

- Batch counter Down Up/down

- Time constant 0.1 s 0.1 - 30 s

Frequency Off 500 Hz, 1 kHz, 5 kHz, 10 kHz

- Time constant 5 s 0.1 - 30 s

Pulse On

- Pulse polarity Positive Positive/negative

- Pulse width 66 ms 64 µs, 130 µs, 260 µs, 510 µs, 1.0 ms, 2.0 ms,

4.1 ms, 8.2 ms, 16 ms, 33 ms, 66 ms, 130 ms, 260 ms, 520 ms, 1.0 s, 2.1 s, 4.2 s.

- Volume/pulse Dim. dependent Dim. dependent

- Time constant 0.1 s 0.1 - 30 s

Electrode cleaning Off Off/cleaning

- Cleaning cycle time 24 h 1 - 240 h

External input

External input Off Batch, reset totalizer, freeze output, forced output, off

- Batch Start, hold/continue, stop, Q

max.

Sensor characteristics

Correction factor 1 0.85 - 2.00 Language English English, German, French, Danish, Swedish, Finnish,

Spanish, Russian, Italian, Portuguese

Operator menu

Primary field Flow rate Flow rate, Totalizer 1, Totalizer 2 Title/subtitle line Flow rate Flow rate, Flow rate %, Q

max.

, Totalizer 1, Totalizer 2, Totalizer 1 reset, Totalizer 2 reset, Batch start/ paused/stop, Batch cycle counter, Batch cycle counter reset, Sensor size, Sensor type, Error pending, Status log, Tag No.

Batch is available on MAG 6000 only

The signal converter is delivered with factory settings ready to measure the actual flow.

Page 70

70 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

DN Q

max.

MAG 5100 W MAG 1100,

3100, 3100 W Volume/ Pulse Totalizer

mm [inches] fac.set. min. max. min. max. unit pulse unit unit

300 - - 25.5 1017 l/h 1 l l

900 - - 70.7 2827 l/h 1 l l

2000 - - 159.1 6361 l/h 1 l l 25 1 5000 442.0 17671 442.0 17671 l/h 10 l l 40 11/

12 1.2 45 1.2 45 m3/h 10 l l 50 2 20 1.6 63 1.8 70 m3/h 10 l l 65 21/

30 2.5 100 3.0 119 m3/h 100 l l 80 3 50 4.0 160 4.6 180 m3/h 100 l l

100 4 120 6.3 250 7.1 282 m3/h 100 l l 125 5 180 10.0 400 11.1 441 m3/h 100 l m

150 6 250 15.7 629 16.0 636 m3/h 100 l m

200 8 400 24.9 997 28.3 1130 m3/h 1 m

250 10 700 40.0 1600 44.2 1767 m3/h 1 m

300 12 1000 62.5 2500 63.7 2544 m3/h 1 m

350 14 1200 86.6 3463 86.6 3463 m3/h 1 m

400 16 1800 113.1 4523 113.1 4523 m3/h 1 m

450 18 2000 143.2 5725 143.2 5725 m3/h 1 m

500 20 3000 176.8 7068 176.8 7068 m3/h 1 m

600 24 4000 254.5 10178 254.5 10178 m3/h 10 m

700 28 5000 346.4 13854 346.4 13854 m3/h 10 m

750 30 6000 397.7 15904 397.7 15904 m3/h 10 m

800 32 7000 452.4 18095 452.4 18095 m3/h 10 m

900 36 9000 573.0 22902 573.0 22902 m3/h 10 m

1000 40 12000 707.0 28274 707.0 28274 m3/h 10 m

1100 44 14000 855.3 34211 855.3 34211 m3/h 10 m

1200 48 15000 1018.0 40715 1018.0 40715 m3/h 10 m

1400 54 25000 - - 1385.5 55417 m3/h 10 m

1500 60 30000 - - 1590.5 63617 m3/h 10 m

1600 66 35000 - - 1809.6 72382 m3/h 10 m

1800 72 40000 - - 2290.3 91608 m3/h 10 m

2000 78 45000 - - 2827.5 113097 m3/h 10 m

8.6.2 Dimension dependent factory settings MAG 5000 and MAG 6000

Volume/pulse or batch quantity

min. max.

DN 15 147 µl 3.86 m

DN 25 409 µl 10.7 m

DN 40 1.05 ml 27.5 m

DN 50 1.64 ml 42.9 m

DN 65 2.77 ml 72.5 m

DN 80 4.19 ml 110 m

DN 100 6.54 ml 172 m

DN 125 10.2 ml 268 m

DN 150 14.7 ml 386 m

DN 200 26.2 ml 686 m

DN 250 40.9 ml 1072 m

DN 300 58.9 ml 1544 m

DN 350 80.2 ml 2102 m

DN 400 105 ml 2745 m

DN 450 133 ml 3474 m

DN 500 164 ml 4289 m

DN 600 236 ml 6177 m

DN 700 321 ml 8407 m

DN 800 419 ml 10981 m

DN 900 530 ml 13897 m

DN 1000 654 ml 17157 m

DN 1200 942 ml 24706 m

DN 2000 2.62 l 68629 m

8.6.3 Dimension dependent batch and pulse output settings

Page 71

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Internal totalizers

Depending on type of approval it is possible to reset the internal totalizers. The type of approval is selected in the reset menu, with the hardware key mounted. It is possible to select between:

• Hot/cold water

• Other liquids

Resetting of totalizers by electrical input is not possible.

Hot/cold water

• Totalizer 1 is allocated to forward flow (cannot be reset).

• Totalizer 2 is allocated to reverse flow (cannot be reset).

Other liquids

Both totalizer 1 and totalizer 2 are allocated to measure the net flow, i.e. any reverse flow will make the totalizers count backwards.

• Totalizer 1 cannot be reset.

• Totalizer 2 can be reset if the flow velocity in the meter pipe is <0.25 m/s. When the totalizer is

reset, the pulse output register will also be reset.

Setting primary operating parameters such as Q

max.

, low flow cut-off, units, approvals, etc. is blocked

during normal operation. See menu setup.

These settings are made in connection with commissioning or calibration by mounting a hardware key on the connection plate of the signal converter. When the key is mounted, there is access to all menu items. When the key is removed, the primary settings are blocked in accordance with the requirements in the authorisation.

8.6.4 MAG 5000 CT and MAG 6000 CT settings

Output

• When selecting hot water, the output settings are not allowed and menu will not be shown on display.

• When selecting cold water or other liquids, all output settings can be changed.

Page 72

72 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Error system

The converter system is equipped with an error and status log system with 4 groups of information.

• Information without a functional error involved

• Warnings which may cause malfunction in the application. The cause of the error may disappear

on its own

• Permanent errors which may cause malfunction in the application. The error requires an operator

• Fatal error which is essential for the operation of the flowmeter

2 menus are available in service and operator menus for registration of information and errors

• Error pending

• Status log

Error pending

The first 9 standing errors are stored in “error pending”. When an error is removed it is removed from “error pending”. The acceptance level for “error pending” can be individually configured to a particular application. The acceptance level is set in the “basic settings” in the converter setup menu.

Acceptance levels

• Fatal error: Fatal errors are registered as errors

• Permanent errors: Permanent and fatal errors are registered as errors

• Warning (Default value): Warnings, permanent and fatal errors are registered as errors

The error information is displayed in the title and subtitle line. The title line will show the time since occurrence of error. The subtitle line will flash between an error text and a remedy text. The error text will indicate type of error (I, W, P or F), error No. and error text. The remedy text will inform the operator of the action to take to remove the error.

Status Log

Like “error pending” except that information, warnings, permanent and fatal errors is always stored in the “status log”. The “status log” stores the latest 9 messages received/registered during the last 180 days.

Alarm field

The alarm field on the display will always flash with an error pending.

Error output

The digital and relay output can individually be activated error by error (error level). The relay output is default selected to error level. An output can also be selected to activate on a single error number. The alarm field, error output and error pending always operate together. The analog output turns to a 1 mA level when in the 4-20 mA mode.

Operator menu

Error pending and status log are as default enabled in the operator menu.

8.7.1 Error handling

Page 73

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



8. Commissioning

Commissioning

Error Error text #Comment Outputs Input

No. Remedy text status status

1 I1 -

Power on

OK Power on has happened Active Active

2 I2 -

Add-on module

Applied A new module has been applied to the system Active Active

3 I3 -

Add-on module

Install An add-on module is defect or has been removed.

This can be an internal add-on module Active Active

4 I4 -

Param. corrected

OK A less vital parameter in the converter has been re-

placed by its default value Active Active

20 W20 -

Totalizer 1

Reset manually During initialisation the check of the saved totalizer

value has failed. It is not possible to rely on the saved totalizer value anymore. The totalizer value must be reset manually in order to rely on future readings Active Active

20 W20 -

Totalizer 2

Reset manually During initialisation the check of the saved totalizer

value has failed. It is not possible to rely on the saved totalizer value anymore. The totalizer value must be reset manually in order to rely on future readings Active Active

21 W21 -

Pulse overflow

Adj. pulse settings Actual flow is too big compared with pulse width and Reduced

volume/pulse pulse width Active

22 W22 -

Batch timeout

Check installation Duration of batching has exceeded a predefined Batch out-

max. time put on zero Active

23 W23 -

Batch overrun

Check installation Batch volume has exceeded a predefined maximum Batch out-

overrun volume put on zero Active

W24 - Batch neg. flow

Check flow direction Negative flow direction during batch Active Active

30 W30 -

Overflow

Adj. Q

max.

Flow is above Q

max.

settings Max. 120 % Active

31 W31 -

Empty pipe

Pipe is empty Zero Active

40 P40 -

SENSORPROM



Insert/change SENSORPROM unit not installed Active Active

41 P41 -

Parameter range

Switch off and on A parameter is out of range. The parameter could not

be replaced by its default value. The error will disappear at the next power-on Active Active

42 P42 -

Current output

Check cables Current loop is disconnected or the loop resistance

is too big Active Active

43 P43 -

Internal error

Switch off and on Too many errors occured at the same time

Some errors are not detected correctly Active Active

44 P44 -

CT SENSORPROM



SENSORPROM unit has been used as CT version Active Active

60 F60 -

CAN comm. error

Converter/AOM CAN bus communication error. An add-on module, the

display module or the converter is defect Zero Inactive

61 F61 -

SENSORPROM error

Replace It is not possible to rely on the data in SENSOR-

PROM unit anymore Active Active

62 F62 -

SENSORPROM ID

Replace The SENSORPROM unit ID does not comply with the

product ID. The SENSORPROM



unit is from another type of

product MASSFLO, SONOFLO etc. Zero Inactive

63 F63 -

SENSORPROM



Replace It is not possible to read from the SENSORPROM



unit anymore. Active Active

70 F70 -

Coil current

Check cables Coil excitation has failed Active Active

71 F71 -

Internal error

Replace converter Internal convertion error in ASIC Active Active

8.7.2 List of error numbers

Page 74

74 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



9. Service

Commissioning

9. Service

Power on converter, display light on

YES

Check cables/connections Check connection board Check pins in converter multiplug - OK

Correct fault

YES

Output readings OK

Converter defective

YES

Display defect Change display

Output and display readings OK ?

Check cables/connections Check connection board Check pins in converter multiplug - OK

Correct fault

Error triangles flashing

YES

Check error table

Converter OK Check settings/application Check installation/sensor/ earthing connection etc.

YES

Often problems with unstable/wrong measurements occur due to insufficient/wrong earthing or potential equalization. Please check this connection. If OK, the SITRANS F M MAGFLO converter can be checked as described under 9.1 and sensor under 9.3.

9.1 Converter check list

When checking SITRANS F M MAGFLO installations for malfunction the easiest method to check the signal converter is to replace it with another MAG 5000/6000 converter with a similar power supply. A replacement can easily be done as all settings are stored in and downloaded from the SENSORPROM



unit - no extra settings need to be made.

If no spare converter is available - then check converter according to check table.

Page 75

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



9. Service

Commissioning

9.2 Trouble shooting MAG converter

Symptom Output Error Cause Remedy

signals code

Empty display Minimum 1. No power supply Power supply

Check MAG 5000/6000 for bended pins on the connector

2. MAG 5000/6000 defective Replace MAG 5000/6000

No flow signal Minimum 1. Current output disabled Turn on current output

2. Digital output disabled Turn on digital output

3. Reverse flow direction Change direction

F70 Incorrect or no coil current Check cables/connections

W31 Measuring pipe empty Ensure that the measuring

pipe is full

F60 Internal error Replace MAG 5000/6000

Undefined P42 1. No load on current output Check cables/connections

2. MAG 5000/6000 defective Replace MAG 5000/6000

P41 Initializing error Switch off MAG 5000/6000,

wait 5 s and switch on again

Indicates flow Undefined Measuring pipe empty Select empty pipe cut-off with no flow

Empty pipe cut-off is OFF Ensure that the measuring

in pipe

pipe is full Electrode connection missing/ Ensure that electrode cable electrode cable is insufficiently is connected and sufficiently screened screened

Unstable Unstable 1. Pulsating flow Increase time constant flow signal

2. Conductivity of medium Use special electrode cable

too low

3. Electrical noise potential Ensure sufficient potential

between medium and equalization

sensor

4. Air bubbles in medium Ensure medium does not

contain air bubbles

5. High concentration of par- Increase time constant

ticles or fibres

Measuring error Undefined Incorrect installation Check installation

P40 No SENSORPROM unit Install SENSORPROM unit P44 CT SENSORPROM unit Replace SENSORPROM unit

or reset SENSORPROM unit

with MAG CT converter

F61 Deficient SENSORPROM unit Replace SENSORPROM unit F62 Wrong type of SENSORPROMReplace SENSORPROM unit

unit

F63 Deficient SENSORPROM unit Replace SENSORPROM unit F71 Loss of internal data Replace MAG 5000/6000

Maximum W30 Flow exceeds 100% of Q

max.

Check Q

max.

(Basic Settings)

W21 Pulse overflow

• Volume/pulse too small Change volume/pulse

• Pulse width too large Change pulse width

Measuring Missing one electrode Check cables approx. 50%

connection

Loss of totalizer OK W20 Initializing error Reset totalizer manually data ##### OK Totalizer roll over Reset totalizer or increase

Signs in display

totalizer unit

Page 76

76 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



9. Service

Commissioning

ATTENTION!

If there is leakage from MAG 1100/3100/3100 W or MAG 5100 W and the unit has been used to measure inflammable/explosive liquids, there might be a risk of explosion when checking with a megger.

9.3 Check list MAG sensor

Disconnect all leads to MAG 1100/3100/3100 W or MAG 5100 W

MAG 1100/3100/3100 W or MAG 5100 W installed and filled with the medium:

Check coil resistance with a multimeter R 85-86 Nominal value: See table

Check coil insulation with a megger (500 V) R 85 - Gnd Nominal value: Infinite resistance

Check electrode circuit with a moving-coil instrument without amplifier (measurement unstable) R 82 - Gnd Nominal value: 5-500 kohm R 83 - Gnd Nominal value: 5-500 kohm

Sensor apparently OK. Remove sensor, dry it and check

Sensor may be defective. Contact Siemens Flow Instruments

Dirty electrodes or conductivity too low

> 500 kohm

< 500 kohm

YES

MAG 1100/3100/3100 W or MAG 5100 W removed from system – empty and dry:

Check coil resistance with a multimeter R 85-86 Nominal value: See table

Check coil insulation with a megger (500 V) R 85 - Gnd Nominal value: Infinite resistance

Check electrode insulation with megger (500 V) R 82 - Gnd Nominal value: Infinite resistance R 83 - Gnd Nominal value: Infinite resistance

YES

MAG 1100/3100/3100 W or MAG 5100 W OK

YES

Check continuity between electrode and electrode terminal R 82 - Electrode Nominal value: 0 kohm R 83 - Electrode Nominal value: 0 kohm

YES

Sensor may be defective. Contact Siemens Flow Instruments

Page 77

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



9. Service

Commissioning

9.4 Coil resistance

Coil resistance for MAG 1100, MAG 1100 PFA = 98 ohms +/− 4

Note

On MAG 1100 DN 15 produced as from May 1999 the coil resistance must be 86 ohm, +8/−4 ohm.

Coil resistance

MAG 3100 MAG 3100 W MAG 5100 W

DN Resistance Size mm Ohms Tolerance Ohms Tolerance

15 104 15 104 +/− 2 104 +/− 2 25 104 25 104 +/− 2 104 +/− 2 40 92 40 92 +/− 292+/− 2 50 92 50 92 +/− 2 124 +/− 4 65 100 65 100 +/− 2 127 +/− 4

80 94 80 94 +/− 2 126 +/− 4 100 92 100 92 +/− 2 125 +/− 4 125 92 125 92 +/− 2 126 +/− 4 150 94 150 94 +/− 2 116 +/− 4 200 90 200 90 +/− 2 109 +/− 4 250 92 250 92 +/− 2 104 +/− 4 300 100 300 100 +/− 2 108 +/− 4 350 112 350 112 +/− 2 112 +/− 2 400 100 400 100 +/− 4 100 +/− 4 450 108 450 108 +/− 4 108 +/− 4 500 122 500 122 +/− 4 122 +/− 4 600 115 600 114 +/− 4 114 +/− 4 700 128 700 112 +/− 4 112 +/− 4 750 133 800 128 800 127 +/− 4 127 +/− 4 900 131 900 93 +/− 493+/− 4

1000 131 1000 103 +/− 4 103 +/− 4 1100 126 1200 130 1200 124 +/− 4 124 +/− 4 1400 130 1500 124 1600 133 1800 133 2000 147

All resistance values are at 20 °C. The resistance changes proportionally 0.4% / °C.

Page 78

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Size Code No. Symbol

MAG 1100 DN 6 FDK:083G4044 Ceramic Al2O

DN 10 FDK:083G4046 Temperature of medium max. 150°C DN 15 FDK:083G4047 Included: DN 25 FDK:083G4049 2 EPDM gaskets, studs and nuts DN 40 FDK:083G4051

DN 50 FDK:083G4052

DN 65 FDK:083G4053

DN 80 FDK:083G4054

DN 100 1) FDK:083G4055

MAG 1100 DN 10 FDK:083G5046 PFA-liner DN 15 FDK:083G5047 Temperature of medium max. 150°C DN 25 FDK:083G5049 Included: DN 40 FDK:083G5051 2 EPDM gaskets, studs and nuts DN 50 FDK:083G5052

DN 65 FDK:083G5053

DN 80 FDK:083G5054

DN 100 1) FDK:083G5055

MAG 1100 (High temperature) DN 15 FDK:083G4057 Ceramic Al2O

DN 25 FDK:083G4059 Temperature of medium max. 200°C DN 40 FDK:083G4061 Included: DN 50 FDK:083G4062 2 graphite gaskets, studs and nuts DN 80 FDK:083G4064

DN 100 1) FDK:083G4065

MAG 1100 Ex DN 6 FDK:083G4024 Ceramic Al2O

DN 10 FDK:083G4026 Temperature of medium max. 120°C DN 15 FDK:083G4027 Included: DN 25 FDK:083G4029 2 EPDM gaskets, studs and nuts DN 40 FDK:083G4031

DN 50 FDK:083G4032

DN 65 FDK:083G4033

DN 80 FDK:083G4034

DN 100 1) FDK:083G4035

MAG 1100/3000 Ex-d DN 6 FDK:083G3054 Ceramic Al2O

DN 10 FDK:083G3056 Temperature of medium max. 120°C DN 15 FDK:083G3057 Included: DN 25 FDK:083G3059 2 EPDM gaskets, studs and nuts DN 40 FDK:083G3061

DN 50 FDK:083G3062

DN 65 FDK:083G3063

DN 80 FDK:083G3064

DN 100 1) FDK:083G3065

MAG 1100 FOOD DN 10 FDK:083G2016 Ceramic Al2O

DN 15 FDK:083G2017 Temperature of medium max. 150°C DN 25 FDK:083G2019 Enclosure IP 67 DN 40 FDK:083G2021

DN 50 FDK:083G2022

DN 65 FDK:083G2023

DN 80 FDK:083G2024

DN 100 FDK:083G2025

MAG 1100 FOOD DN 10 FDK:083G5066 PFA DN 15 FDK:083G5067 Temperature of medium max. 130°C DN 25 FDK:083G5069 Enclosure IP 67 DN 40 FDK:083G5071

DN 50 FDK:083G5072

DN 65 FDK:083G5073

DN 80 FDK:083G5074

DN 100 FDK:083G5075

10.1 Sensor MAG 1100

) The studs supplied for DN 100 are for PN 10/16 only. For use with PN 25/40, see "Accessories".

10. Ordering

Page 79

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Material DN Code No. Symbol Pipe connection 1/2” external thread AISI 316 6, 10 FDK:083G0080

2 pipe connections (1.4436) 2 gaskets EPDM 12 M4 screws (12 mm)

Grounding ring AISI 316 6, 10 FDK:083G0686 1 potential equalizing ring (1.4436) 15 FDK:083G0687 3 teflon gaskets 25 FDK:083G0689 1 earth strap 40 FDK:083G0691 1 M6 screw 50 FDK:083G0692

65 FDK:083G0693 80 FDK:083G0694

100 FDK:083G0695

Grounding ring Hastelloy C22 6, 10 FDK:083G3256 1 potential equalizing ring 15 FDK:083G3257 3 teflon gaskets 25 FDK:083G3259 1 earth strap 40 FDK:083G3261 1 M6 screw 50 FDK:083G3262

65 FDK:083G3263 80 FDK:083G3264

100 FDK:083G3265

Studs and nuts for DN 100 PN 25/40 AISI 304 100 FDK:083G0226 8 M20 studs (1.4305) 16 M20 nuts

Accessories

Description Material DN Code No. Symbol EPDM gaskets EPDM 10 FDK:083G2206

2 gaskets 15 FDK:083G2207

25 FDK:083G2209 40 FDK:083G2211 50 FDK:083G2212 65 FDK:083G2213 80 FDK:083G2214

100 FDK:083G2215

NBR gaskets NBR 10 FDK:083G2216 2 gaskets 15 FDK:083G2217

25 FDK:083G2219 40 FDK:083G2221 50 FDK:083G2222 65 FDK:083G2223 80 FDK:083G2224

100 FDK:083G2225

Description Material DN Code No. Symbol EPDM gaskets EPDM 6, 10 FDK:083G3116

2 gaskets 15 FDK:083G3117 2 earth straps 25 FDK:083G3119 3 M6 screws 40 FDK:083G3121

50 FDK:083G3122 65 FDK:083G3123 80 FDK:083G3124

100 FDK:083G3125

PTFE gaskets PTFE 6, 10 FDK:083G0156 2 PTFE gaskets 15 FDK:083G0157 2 earth straps 25 FDK:083G0159 3 M6 screws 40 FDK:083G0161

50 FDK:083G0162 65 FDK:083G0163 80 FDK:083G0164

100 FDK:083G0165

Graphite gaskets Graphite 6, 10 FDK:083G0116 2 gaskets 15 FDK:083G0117

25 FDK:083G0119 40 FDK:083G0121 50 FDK:083G0122 65 FDK:083G0123 80 FDK:083G0124

100 FDK:083G0125

Gaskets for MAG 1100 FOOD

Gaskets for MAG 1100

Page 80

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Adapter DoDiSensor Clamp type: Matching standard

DN DN DIN 32676 DS/ISO 2852 SMS 3016 BS 4825-3 Tri-Clamp



[mm] [mm] [mm] [mm] Code No. Code No. Code No. Code No. Code No.

10 34.0 10.0 10 FDK:083G2186 FDK:083G2186 FDK:083G2186 - FDK:083G2286 15 34.0 16.0 15 FDK:083G2187 FDK:083G2187 FDK:083G2187 - FDK:083G2287 20 34.0 20.0 15 FDK:083G2188 FDK:083G2188 ---

25 50.5 22.6 25 - FDK:083G2189 FDK:083G2189 FDK:083G2189 FDK:083G2289 25 50.5 26.0 25 FDK:083G2179 FDK:083G2179 ---

33.7 50.5 31.3 25 FDK:083G2190 FDK:083G2190 FDK:083G2190 --

38 50.5 35.6 40 - FDK:083G2191 FDK:083G2191 FDK:083G2191 FDK:083G2291 40 50.5 38.0 40 FDK:083G2181 FDK:083G2181 --50 64.0 50.0 50 FDK:083G2182 ----

51 64.0 48.6 50 FDK:083G2192 FDK:083G2192 FDK:083G2192 FDK:083G2292

63.5 77.5 60.3 65 - FDK:083G2193 FDK:083G2193 FDK:083G2193 FDK:083G2293 65 91.0 66.0 65 FDK:083G2183 ----

76.1 91.0 72.9 80 - FDK:083G2194 FDK:083G2194 FDK:083G2194 FDK:083G2294 80 106.0 81.0 80 FDK:083G2184 ----

100 119.0 100.0 100 FDK:083G2185 ---FDK:083G2295

101.6 119.0 97.6 100 - FDK:083G2195 ---

Adapter DoDiSensor Weld-in type: Matching standard

DN DN DIN 11850 DS/ISO 2037 SMS 3008 BS 4825-1 Tri-Clover



[mm] [mm] [mm] [mm] Code No. Code No. Code No. Code No. Code No.

10 13.0 10.0 10 FDK:083G2116 FDK:083G2116 FDK:083G2116 FDK:083G2116 FDK:083G2276 15 19.0 16.0 15 FDK:083G2117 FDK:083G2117 FDK:083G2117 -

15.9 15.9 13.5 15 - - - - FDK:083G2277

20 23.0 20.0 15 FDK:083G2118 FDK:083G2118 FDK:083G2118 25 25.6 22.6 25 - FDK:083G2109 FDK:083G2109 FDK:083G2109 FDK:083G2279 25 29.0 26.0 25 FDK:083G2119 ----

28 28.6 25.6 25 - FDK:083G2100 --32 32.0 29.6 25 - - FDK:083G2102 -32 35.0 32.0 25 FDK:083G2120 ----

33.7 34.3 31.3 25 - FDK:083G2110 FDK:083G2110 -38 38.6 35.6 40 - FDK:083G2111 FDK:083G2111 FDK:083G2111 FDK:083G2281 40 40.6 37.6 40 - FDK:083G2101 ---

40 41.0 38.0 40 FDK:083G2121 ---50 53.0 50.0 50 FDK:083G2122 ---51 51.6 48.6 50 - FDK:083G2112 FDK:083G2112 FDK:083G2112 FDK:083G2282

63.5 64.1 60.3 65 - FDK:083G2113 FDK:083G2113 FDK:083G2113 FDK:083G2283 65 70.0 66.0 65 FDK:083G2123 ---70 70.6 66.8 65 - FDK:083G2103 ---

76 76.0 72.0 65 - - FDK:083G2106 --

76.1 76.7 72.9 80 - FDK:083G2114 FDK:083G2114 FDK:083G2114 FDK:083G2284 80 85.0 81.0 80 FDK:083G2124 ----

88.9 88.9 84.9 80 - FDK:083G2104 FDK:083G2104 --

100 104.0 100.0 100 FDK:083G2125 ---FDK:083G2285

101.6 102.5 97.6 100 - FDK:083G2115 ---

114.3 115.6 110.3 100 - FDK:083G2105 ---

10.2 Adapter, MAG 1100 FOOD (contains 2 adapters, 2 clamp rings and 2 gaskets)

Symbol

Page 81

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Adapter D

DiSensor Threaded type: Matching standard

DN DN ISO 2853 SS 3351 BS 4825-4 (IDF)

[mm] [mm] [mm] [mm] Code No. Code No. Code No.

25 37.0 22.6 25 FDK:083G2149 FDK:083G2149 FDK:083G2149 38 51.0 35.6 40 FDK:083G2151 FDK:083G2151 FDK:083G2151 51 64.0 48.6 50 FDK:083G2152 FDK:083G2152 FDK:083G2152

63.5 78.0 60.3 65 FDK:083G2153 FDK:083G2153 FDK:083G2153

76.1 91.0 72.9 80 FDK:083G2154 FDK:083G2154 FDK:083G2154

101.6 118.0 97.6 100 FDK:083G2155 FDK:083G2155 -

101.6 126.0 97.6 100 - - FDK:083G2145

Threaded type: Matching standard

Adapter D

Sensor DIN 11851

DN DN

[mm] [mm] [mm] [mm] Code No.

10 28.0 10.0 10 FDK:083G2156 15 34.0 16.0 15 FDK:083G2157 20 44.0 20.0 15 FDK:083G2158

25 52.0 26.0 25 FDK:083G2159 32 58.0 32.0 25 FDK:083G2160 40 65.0 38.0 40 FDK:083G2161

50 78.0 50.0 50 FDK:083G2162 65 95.0 66.0 65 FDK:083G2163 80 110.0 81.0 80 FDK:083G2164

100 130.0 100.0 100 FDK:083G2165

Symbol

10.2 Adapter, MAG 1100 FOOD

(continued)

Symbol

Threaded type: Matching standard

Adapter D

Sensor SMS 1145

DN DN

[mm] [mm] [mm] [mm] Code No.

25 40.0 22.6 25 FDK:083G2139 32 48.0 29.6 25 FDK:083G2140 38 60.0 35.6 40 FDK:083G2141

51 70.0 48.6 50 FDK:083G2142

63.5 85.0 60.3 65 FDK:083G2143 76 98.0 72.0 65 FDK:083G2144

Tri-Clover and Tri-Clamp are registered trademarks for Ladish Co.

Page 82

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Type No.: MAG 3100

−−

−

1. Nominal size DN

15 ......................................................................... 04

25 ......................................................................... 06

40 ......................................................................... 08

50 ......................................................................... 09

65 ......................................................................... 10

80 ......................................................................... 11

100 ......................................................................... 12

125 ......................................................................... 13

150 ......................................................................... 14

200 ......................................................................... 15

250 ......................................................................... 16

300 ......................................................................... 17

350 ......................................................................... 18

400 ......................................................................... 19

450 ......................................................................... 30

500 ......................................................................... 20

600 ......................................................................... 21

700 ......................................................................... 22

750 ......................................................................... 34

800 ......................................................................... 23

900 ......................................................................... 24

1000 ......................................................................... 25

1050 ......................................................................... 35

1100 ......................................................................... 26

1200 ......................................................................... 27

1400 ......................................................................... 28

1500 ......................................................................... 29

1600 ......................................................................... 31

1800 ......................................................................... 32

2000 ......................................................................... 33

2. Liner material

Neoprene ............................................................................. 1

EPDM ................................................................................... 2

PTFE (DN ≤ 300, PN ≤ 50 bar), ........................................... 3

PTFE (DN ≥ 350 ≤ 600, PN ≤ 40 bar)

Ebonite ................................................................................ 6

Linatex



(PN ≤ 40 bar) ....................................................... 7

3. Flanges

EN 1092-1, PN 6 (DN 65 - 2000) ................................................... A

EN 1092-1, PN 10 (DN 200 - 2000) ............................................... B

EN 1092-1, PN 16 (DN 65 - 2000) conform to PED 97/23/EC ...... C

EN 1092-1, PN 16 (DN 700 - 2000) not conform to PED 97/23/EC W

EN 1092-1, PN 25 (DN 200 - 600) ................................................. D

EN 1092-1, PN 40 (DN 15 - 600) .................................................... E

EN 1092-1, PN 63 (DN 50 - 400) not with PTFE ........................... Q

EN 1092-1, PN 100 (DN 25 - 350) not with PTFE ......................... R

ANSI class 150 (DN 15 - 600, 20 bar) ........................................... F

ANSI class 300 (DN 15 - 600, 50 bar) ........................................... G

AS 2129, Table E (DN 15 - 1200, 14 bar) ...................................... N

AWWA C-207, class D (DN 700 - 2000, 10 bar) ........................... O

AS 4087 Class 14 (DN 50 - 1200, 14 bar) ..................................... P

AS 4087 Class 21 (DN 50 - DN 600, 21 bar) ................................. T

AS 4087 Class 35 (DN 50 - DN 600, 35 bar) ................................. V

4. Electrode material/PE electrodes (not PTFE)

AISI 316 Ti, ceramic coated (PE electrodes not coated) .......................... 1

AISI 316 Ti ................................................................................................... 2

Hastelloy C-276 ........................................................................................... 4

Platinum/iridium (80/20) .............................................................................. 5

Titanium ....................................................................................................... 6

Tantalum ..................................................................................................... 8

5. Flange and housing material

Carbon steel (grey coating) .................................................................................... 1

AISI 304 flanges/carbon steel (grey coating), ....................................................... 2

AISI 316 L flanges/housing (polished) .................................................................... 3

6. Temperature/Ex-version

Standard ............................................................................................................................................. 1000

High temperature (PTFE only, DN ≤ 300 mm, PN ≤ 50 bar) .............................................................. 2100

EEx e ia IIC T4-T6 (DN 350 - 2000) .................................................................................................... 4000

EEx ia ib IIB T4-T6 (DN 15 - 300) ....................................................................................................... 4100

Compact EEx de (DN 15 - 300) ......................................................................................................... 5000

10.3 Sensor MAG 3100 and MAG 3100 Ex

Page 83

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Earthing/protection flange type E (AISI 316) for PTFE liner only

Accessories

Description Code No. Symbol

Submersible kit (IP 68, 10 m w.g.) For use with standard MAG 3100 when sensor is buried FDK:085U0220 or permanently submerged.

Earthing/protection flange type C (AISI 304) for all liners except PTFE for MAG 3100 and 3100 W only

Flange

PN 6 PN 10 PN 16 PN 25 PN 40 150 lb 300 lb

FDK: FDK: FDK: FDK: FDK: FDK: FDK:

DN 083N... 083N... 083N... 083N... 083N... 083N... 083N...

25 8361 8361 8361 40 8362 8362 8362

50 8344 8344 8344 65 8345 8345 8345 8345 8345 80 8347 8347 8347 8347 8347 100 8070 8025 8025 8025 8025 125 8071 8071 8071 8071 8071 150 8072 8008 8008 8008 8073 200 8074 8011 8011 8011 8075 8011 8076 250 8078 8013 8013 8013 8079 8013 8079 300 8080 8012 8012 8081 8082 8012 8082 350 8083 8039 8039 8084 8085 8039 8085 400 8099 8100 8100 8101 8102 8100 8102 450 8103 8103 8104 8104 8105 8104 8106 500 8107 8107 8108 8108 8109 8107 8110 600 8111 8111 8112 8112 8113 8114 700 8300 8294 8294 800 8303 8304 8304 900 8306 8307 8307 1000 8309 8310 8310 1200 8312 8313 8313

1400 8349 8353 8357 1600 8350 8354 8358 1800 8351 8355 8359 2000 8352 8356 8360

ANSI B 16.5EN 1092-1

Pressure

stage

Flange

PN 6 PN 10 PN 16 PN 25 PN 40 150 lb 300 lb

stage FDK: FDK: FDK: FDK: FDK: FDK: FDK:

DN 083N... 083N... 083N... 083N... 083N... 083N... 083N...

15 8365 8365 8365 25 8271 8272 8272 40 8278 8275 8275 50 8282 8283 8283 65 8284 8285 8286 8287 8287 80 8288 8289 8290 8291 8292 100 8116 8117 8118 8118 8119 125 8120 8121 8122 8122 8123 150 8124 8125 8126 8126 8127 200 8129 8130 8130 8131 8132 8370 8133 250 8135 8136 8137 8138 8139 8140 8141 300 8144 8144 8145 8146 8147 8148 8149 350 8152 8153 8154 8155 8156 8157 8158 400 8160 8161 8162 8163 8164 8165 8166 450 8168 8169 8170 8171 8172 8173 8174 500 8177 8178 8179 8180 8181 8182 8183 600 8186 8187 8188 8189 8190 8191

ANSI B 16.5EN 1092-1

Pressure

Page 84

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

DN PN Code No.

EN 1092-1 flanges Neoprene EPDM

liner liner

Liner:

Neoprene or EPDM 25 40 FDK:083Z8000 FDK:083Z8100

Flanges:

Carbon steel, EN 1092-1 40 40 FDK:083Z8001 FDK:083Z8101

Electrodes:

AISI 316 Ti 50 40 FDK:083Z8002 FDK:083Z8102

Grounding electrodes:

AISI 316 Ti 65 16 FDK:083Z8003 FDK:083Z8103

Enclosure:

IP 67 80 16 FDK:083Z8004 FDK:083Z8104

100 16 FDK:083Z8005 FDK:083Z8105 125 16 FDK:083Z8053 FDK:083Z8055 150 16 FDK:083Z8007 FDK:083Z8107 200 10 FDK:083Z8008 FDK:083Z8108 200 16 FDK:083Z8208 FDK:083Z8308 250 10 FDK:083Z8009 FDK:083Z8109 250 16 FDK:083Z8209 FDK:083Z8309 300 10 FDK:083Z8010 FDK:083Z8110 300 16 FDK:083Z8210 FDK:083Z8310 350 10 FDK:083Z8058 FDK:083Z8060 350 16 FDK:083Z8059 FDK:083Z8061 400 10 FDK:083Z8012 FDK:083Z8065 400 16 FDK:083Z8063 FDK:083Z8066 450 10 FDK:083Z8068 FDK:083Z8070 450 16 FDK:083Z8213 FDK:083Z8071 500 10 FDK:083Z8014 FDK:083Z8114 500 16 FDK:083Z8214 FDK:083Z8314 600 10 FDK:083Z8015 FDK:083Z8115 600 16 FDK:083Z8215 FDK:083Z8315 700 10 FDK:083Z8016 FDK:083Z8116 800 10 FDK:083Z8017 FDK:083Z8117

900 10 FDK:083Z8018 FDK:083Z8118 1000 10 FDK:083Z8019 FDK:083Z8119 1200 10 FDK:083Z8021 FDK:083Z8121

10.4 Sensor MAG 3100 W

Nominal Nominal Flange type PN Code No. ANSI/AWWA size size Neoprene EPDM flanges DN inch bar liner liner

25 1" ANSI 150 20 FDK:083Z8600 FDK:083Z8650 40 1½" ANSI 150 20 FDK:083Z8601 FDK:083Z8651 50 2" ANSI 150 20 FDK:083Z8602 FDK:083Z8652 65 2½" ANSI 150 20 FDK:083Z8603 FDK:083Z8653

80 3" ANSI 150 20 FDK:083Z8604 FDK:083Z8654 100 4" ANSI 150 20 FDK:083Z8051 FDK:083Z8052 125 5" ANSI 150 20 FDK:083Z8054 FDK:083Z8656 150 6" ANSI 150 20 FDK:083Z8056 FDK:083Z8057 200 8" ANSI 150 20 FDK:083Z8608 FDK:083Z8658 250 10" ANSI 150 20 FDK:083Z8609 FDK:083Z8659 300 12" ANSI 150 20 FDK:083Z8610 FDK:083Z8660 350 14" ANSI 150 20 FDK:083Z8611 FDK:083Z8661 400 16" ANSI 150 20 FDK:083Z8064 FDK:083Z8067 450 18" ANSI 150 20 FDK:083Z8613 FDK:083Z8663 500 20" ANSI 150 20 FDK:083Z8614 FDK:083Z8664 600 24" ANSI 150 20 FDK:083Z8615 FDK:083Z8665 700 28" AWWA 10 FDK:083Z8616 FDK:083Z8666 750 30" AWWA 10 FDK:083Z8622 FDK:083Z8672 800 32" AWWA 10 FDK:083Z8617 FDK:083Z8667 900 36" AWWA 10 FDK:083Z8618 FDK:083Z8668

1000 40" AWWA 10 FDK:083Z8619 FDK:083Z8669 1050 42" AWWA 10 FDK:083Z8673 1200 48" AWWA 10 FDK:083Z8621 FDK:083Z8671

Liner:

Neoprene/

EPDM

Flange:

Carbon steel ANSI Class 150 or AWWA C-207, Class D

Electrodes:

AISI

316 Ti

Grounding electrode:

AISI 316 Ti

Enclosure:

IP 67

Page 85

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

10.5 Sensor MAG 5100 W

EN 1092-1 flanges DN PN PED Code No.

Liner:

Composite elastomer or 25 40 Yes FDK:082Z8500

hard elastomer 40 40 Yes FDK:082Z8502

Flanges:

Carbon steel, EN 1092-1 50 40*) Yes FDK:082Z8504

Electrodes:

AISI 316 Ti 65 16 Yes FDK:082Z8506

Grounding electrodes:

AISI 316 Ti 80 16 Yes FDK:082Z8508

Enclosure:

IP 67 100 16 Yes FDK:082Z8510

125 16 Yes FDK:082Z8512 150 16 Yes FDK:082Z8514 200 10 Yes FDK:082Z8516

16 Yes FDK:082Z8517

250 10 Yes FDK:082Z8519

16 Yes FDK:082Z8520

300 10 Yes FDK:082Z8522

16 Yes FDK:082Z8523

350 10 Yes FDK:082Z8525

16 Yes FDK:082Z8526

400 10 Yes FDK:082Z8528

16 Yes FDK:082Z8529

450 10 Yes FDK:082Z8531

16 Yes FDK:082Z8532

500 10 Yes FDK:082Z8534

16 Yes FDK:082Z8535

600 10 Yes FDK:082Z8537

16 Yes FDK:082Z8538

700 10 Yes FDK:082Z8540

16 No FDK:082Z8541 16 Yes FDK:082Z8558

800 10 Yes FDK:082Z8544

16 No FDK:082Z8545 16 Yes FDK:082Z8559

900 10 Yes FDK:082Z8547

16 No FDK:082Z8548 16 Yes FDK:082Z8560

1000 10 Yes FDK:082Z8550

16 No FDK:082Z8551 16 Yes FDK:082Z8561

1200 10 Yes FDK:082Z8555

16 No FDK:082Z8556 16 Yes FDK:082Z8562

*) max. 20 bar

Page 86

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Version Enclosure Code No. Symbol

Signal converter MAG 5000 Blind 11-30 V d.c./ IP 67, fibre- for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5006

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5005

polyamide

Signal converter MAG 5000 11-30 V d.c./ IP 67, fibre- for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5002

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5001

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5011

HART



polyamide

10.6 Signal converter

Compact polyamide

Description Version Enclosure Code No. Symbol

Signal converter MAG 6000 Blind 11-30 V d.c./ IP 67, fibre-

for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5008

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5007

polyamide

Signal converter MAG 6000 11-30 V d.c./ IP 67, fibre- for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5004

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5003

polyamide

Description Version Enclosure Code No. Symbol

Signal converter MAG 6000 CT 11-30 V d.c./ IP 67, fibre- for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5010

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5009

polyamide

Accessories MAG 5000 and MAG 6000

Description Code No. Symbol

Wall mounting unit for IP 67 version

Wall bracket, 4 Pg 13.5 cable glands FDK:085U1001

Spare parts

Description Version Code No. Symbol

Connection plate 12-24 V FDK:083F4149

115-230 V FDK:083F4148

Add-on module MAG 6000 only

Description Code No. Symbol

HART





FDK:085U0226

Profibus PA FDK:085U0227 CANopen FDK:085U0228 DeviceNet FDK:085U0229 Profibus DP FDK:085U0230

Description Version Enclosure Code No. Symbol

Signal converter MAG 5000 CT 11-30 V d.c./ IP 67, fibre-

for compact and wall mounting 11-24 V a.c. glass reinforced FDK:083F5046

polyamide

115/230 V a.c. IP 67, fibre-

50/60 Hz glass reinforced FDK:083F5044

polyamide

Page 87

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Version Code No. Symbol

Signal converter MAG 5000 for rack 11-30 V d.c./ FDK:083F5021 and panel mounting 11-24 V a.c.

115-230 V a.c. FDK:083F5020

50/60 Hz

Signal converter MAG 6000 for rack 11-30 V d.c./ FDK:083F5023 and panel mounting 11-24 V a.c.

115-230 V a.c. FDK:083F5022

50/60 Hz

Signal converter MAG 6000

(DN ≤ 300)

11-30 V d.c./

insert with safety barrier [EEx ia/ib] IIB 11-24 V a.c. FDK:083F5041

Signal converter MAG 6000

(DN ≤ 300)

115-230 V a.c.

insert with safety barrier [EEx ia/ib] IIB 50/60 Hz FDK:083F5040

Wall boxes (Without back plates)

Description Code No. Symbol

IP 66 wall mounting enclosure for IP 20 19" inserts (21 TE) FDK:083F5037

IP 66 wall mounting enclosure for IP 20 19" inserts

(42 TE) FDK:083F5038

Description Version Code No. Symbol Cleaning unit for electrode cleaning 115-230 V a.c.

19" insert (21 TE) incl. back plate 50/60 Hz FDK:083F5036 Cleaning unit for electrode cleaning 11-30 V d.c.

19" insert (21 TE) incl. back plate 11-24 V a.c. FDK:083F5039

Safety barrier [EEx ia] IIC for MAG 3100 Ex DN 350-2000 19" insert (21 TE) incl. back plate FDK:083F5034

Panel mounting kit for 19" insert (21 TE) IP 65 enclosure in ABS plastic for panel-front mounting FDK:083F5030

Panel mounting kit for 19" insert (42 TE) IP 65 enclosure in ABS plastic for panel-front mounting FDK:083F5031

Back of panel mounting kit for 19" insert (21 TE) IP 20 enclosure in aluminium FDK:083F5032

Back of panel mounting kit for 19" insert (42 TE) IP 20 enclosure in aluminium FDK:083F5033

Front cover (7 TE) FDK:083F4525

Accessories

Description Version Code No. Symbol

MAG 6000 with IP 66 enclosure 115/230 V a.c.

50/60 Hz FDK:083F5026

MAG 6000 19" insert and cleaning unit 115/230 V a.c.

complete mounted with 50/60 Hz FDK:083F5029 IP 66 wall mounting enclosure

MAG 6000 19" insert and cleaning unit 11-30 V d.c. complete mounted with 11-24 V a.c. FDK:083F5047 IP 66 wall mounting enclosure

MAG 6000 19" insert and safety barrier

(DN ≤ 300)

115/230 V a.c. complete mounted with IP 66 50/60 Hz FDK:083F5028 wall mounting enclosure, [EEx ia/ib] IIB

MAG 6000 19" insert and safety barrier

(DN ≥ 350)

115/230 V a.c. complete mounted with IP 66 50/60 Hz FDK:083F5027 wall mounting enclosure, [EEx ia/e] IIC

Wall mounting units complete

10.7 Signal converter 19" incl. back plate

Page 88

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Code No. Symbol

Length

Cable 10 m FDK:083F0121 for standard electrode or coil, 20 m FDK:083F0210 3 x 1.5 mm2 with shield 40 m FDK:083F0211 PVC 60 m FDK:083F0212

100 m FDK:083F0213 150 m FDK:083F3052 200 m FDK:083F3053 500 m FDK:083F3054

Cable 20 m FDK:083F3095 required for empty pipe or low conductivity, 40 m FDK:083F3094 double shielded, 3 x 1.5 mm

60 m FDK:083F3093

PVC 100 m FDK:083F3092

150 m FDK:083F3056 200 m FDK:083F3057 500 m FDK:083F3058

Standard Pg 13.5 screwed cable entries for above cables (nickel-plated brass) 2 pcs. FDK:083G3140

Standard Pg 13.5 screwed cable entries for above cables in black polyamide (100°C) 2 pcs. FDK:083G0228

Sealing screws for sensor/signal converter 2 pcs. FDK:085U0221

Stainless steel (AISI 316) terminal box with lid FDK:085U1000

Polyamide terminal box FDK:085U1002

Complete incl. terminals incl. lid

Polyamide lid for terminal box FDK:085U1003

2 kB SENSORPROM





unit FDK:085U1005

(Sensor serial No. must be specified when ordering)

Adapter for ½ NPT brass FDK:083N4394

Adapter for ½ NPT stainless steel FDK:083N4395

Adapter for ½ NPT polyamide FDK:083N4396

10.8 Accessories

Back plates

Description Enclosure Version Code No. Symbol

Signal converter 19" 12-24 V FDK:083F4117

115-230 V

Signal converter & ia, safety barrier 19" 12-24 V FDK:083F4118

115-230 V

Signal converter & ia/ib, safety barrier 19" 12-24 V FDK:083F4119

115-230 V

Signal converter & cleaning unit 19" 12-24 V FDK:083F4123

115-230 V

Signal converter Wall unit 12-24 V FDK:083F4121

115-230 V

Signal converter & ia, safety barrier Wall unit 12-24 V FDK:083F4122

115-230 V

Signal converter & ia/ib, safety barrier Wall unit 12-24 V FDK:083F4120

115-230 V

Signal converter & cleaning unit Wall unit 12-24 V FDK:083F4124

115-230 V

Page 89

SITRANS F M MAGFLO



DKFD.PS.027.W3.02

10. Ordering

Ordering

Description Code No. Code No. Code No. Code No.

DN 3-65 DN 80-150 DN 200-500 DN 600-1200

Standard calibration

Each sensor calibrated twice at two calibration points Included in sensor scope of delivery

Matched pair

Sensor and signal converter calibrated together with standard calibration

Customer specified matched pair

Sensor with signal converter calibrated in max. 10 customer specified points

Accredited Siemens Flow Instruments matched pairs Calibrations acc. to EN 45001

Sealing and labeling instruction must follow the order

- PTB cold water

- PTB other media than water

- OIML R75 hot water

- OIML R117 other media than water

- OIML R117 cold water

Accredited Delft matched pair Calibration acc. to EN 45001

Sealing and labeling instruction as above

Wittness inspection

Any of above mentioned calibrations

10.9 Calibration

Initial calibration

Re-calibration

Description Code No. Code No. Code No. Code No.

DN 3-65 DN 80-150 DN 200-500 DN 600-1200

Matched pair

Sensor and signal converter calibrated FDK:085F7302 FDK:085F7303 FDK:085F7304 FDK:085F7305 together with standard calibration

Customer specified matched pair

Sensor with signal converter calibrated FDK:085F7377 FDK:085F7378 FDK:085F7379 FDK:085F7380 in max. 10 customer specified points

Accredited Siemens Flow Instruments matched pairs Calibrations acc. to EN 45001

Sealing and labeling instruction must follow the order

- PTB cold water FDK:085F7387 FDK:085F7388 FDK:085F7389 FDK:085F7390

- PTB other media than water

- OIML R75 hot water

- OIML R117 other media than water

- OIML R117 cold water

Accredited Delft matched pair Calibration acc. to EN 45001 N/A FDK:085F7393 FDK:085F7394 FDK:085F7395

Sealing and labeling instruction as above

Add-on

Code No.: On application form to be filled in and sent to SFI-GB

Page 90

90 DKFD.PS.027.W3.02

SITRANS F M MAGFLO



Page 91

DKFD.PS.027.W3.02

SITRANS F M MAGFLO



Page 92

We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are always welcomed.

Technical data subject to change without prior notice.

The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

SIEMENS Flow Instruments A/S Nordborgvej 81 DK-6430 Nordborg

Order no.: FDK:521H0723-01 Printed in: Denmark

Siemens MAG 1100, MAG 3100, MAG 5100 W, MAG 5000, MAG 6000 Handbook

Specifications and Main Features

Frequently Asked Questions

User Manual