Sharp XL-3000C Manual

0 (0)

COMPACT AUDIO SYSTEM CHAÎNE AUDIO COMPACTE

MODEL

MODÈLE

XL-3000C

OPERATION MANUAL

MODE D’EMPLOI

XL-3000C Compact Audio System consisting of XL-3000C (main unit) and CP-XL3000U (speaker system).

Chaîne audio compacte XL-3000C composée de XL-3000C (appareil principal) et de CP-XL3000U (enceintes acoustiques).

ENGLISH Please refer to pages E-1 to E-28.

FRANÇAIS Se reporter aux pages F-1 à F-28.

ENERGY STAR® Program Information

As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.

WHY PURCHASE ENERGY STAR® LABELED PRODUCTS?

Many Electrical /Electronic Products use energy both when they are on and when they are off. Americans spend more than $3 billion a year on energy consumed by home electronic products when they are not in use. The new ENERGY STAR® labeled models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than $1 billion a year in energy savings for consumers.

The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution that contributes to global warming. If every American family replaced their electronic equipment with ENERGY STAR® labeled models, it would reduce

air pollution equivalent to eliminating more than two million cars.

By using ENERGY STAR® labeled products, you will save money on your electric bills and use less energy. That makes good economic sense and it’s good for our environment.

ENERGY STAR® is a U.S. registered mark.

0001

ENGLISH

Introduction

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

Contents

Page

Ñ General Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6

Ñ Preparation for Use

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 - 10

Ñ Basic Operation

General Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Ñ CD Playback

Page

Ñ Radio

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19 Listening to the Memorised Station . . . . . . . . . . . . . . . . . . . . . 20

Ñ Advanced Features

Timer and Sleep Operation . . . . . . . . . . . . . . . . . . . . . . . . .21 - 23

Enhancing Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Ñ References

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Listening to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 16 Repeat or Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Programmed Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

General Information - Introduction / Contents -

ENGLISH E-1

General Information - Precautions -

E-2

Precautions

Ñ General

zPlease ensure that the equipment is positioned in a well-venti- lated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 30 cm (12") of free space on the top of the unit.

10 cm (4") 10 cm (4")

30 cm (12")

10 cm (4")

zUse the unit on a firm, level surface free from vibration.

z Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generates electrical noise.

zDo not place anything on top of the unit.

zDo not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures.

zIf your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.

z In case of an electrical storm, unplug the unit for safety.

z Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.

z Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.

zThis unit should only be used within the range of 5°C - 35°C (41°F - 95°F).

Warnings:

zThe voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

zCD players use a laser pickup which can damage the eyes if viewed directly. Do not look at the pickup, and do not touch the pickup directly.

Ñ Volume control

The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels, which occurs whilst turning the unit on with the volume control setting up high, or whilst continually listening at high volumes.

ENGLISH

Ñ Care of compact discs

Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player.

zDo not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface.

zKeep your discs away from direct sunlight, heat, and excessive moisture.

zAlways hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

NO

YES

 

correct

Ñ Condensation

Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control.

Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.

Accessories

Please confirm that the following accessories are included.

AC power lead

1

Remote control

1

 

AM loop aerial

1

FM aerial

1

GeneralInformation

- Precautions /Accessories-

 

 

 

 

 

Speaker wire

2

 

 

 

Note:

 

 

 

 

 

Only the above accessories are included.

ENGLISH E-3

Information

and Indicators -

General

- Controls

 

 

 

 

Controls and Indicators

Ñ Front panel

 

7

1

8

 

9

 

 

Reference page

 

1. CD Compartment . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 11, 14

10

2. Volume Up and Down Buttons . . . . . . . . . . .

. . . . . . . . . . . 12

 

3. Power Button . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 11

 

4. Function Selector Button . . . . . . . . . . . . . . .

. . . . . 14, 18, 24

 

5. Memory/Set Button . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 17, 20

 

6. Bass/Treble Selector Button . . . . . . . . . . . . .

. . . . . . . . . . . 12

 

7. CD Play or Pause, Tuning Up Button . . . . . .

. . . . . 14, 15, 18

 

8. CD Stop, Tuning Down Button . . . . . . . . . . .

. . . . . . . . 15, 18

 

9. CD Track Down or Fast Reverse,

 

 

Tuner Preset Down Button . . . . . . . . . . . . . .

. . . . . . . . 16, 20

 

10. CD Open/Close Button . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 11

 

11. CD Track Up or Fast Forward,

 

 

Tuner Preset Up Button . . . . . . . . . . . . . . . . .

. . . . . . . . 16, 20

2

3

 

 

 

5

Ñ Display

 

 

 

1. Timer Play Indicator

4

 

 

 

 

2. Sleep Indicator

 

 

 

6

3. CD Random Play Indicator

 

 

 

 

4. Memory Indicator

 

 

 

 

 

5. FM Stereo Mode Indicator

1

2

3

4

5

6. CD Play Indicator

7. CD Repeat Play Indicator

 

 

 

 

 

8. FM Stereo Receiving Indicator

9. Surround Indicator

8 6

7

9

E-4

ENGLISH

 

 

Description of remote control (See page 6.)

 

 

1

2

3

4

5

6 7 8 9

1

2

4

3

Ñ Rear panel

 

Reference page

1. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 24

2. AM Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8, 10

3. Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8, 10

4. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . .

8, 10

5. CD Digital Output Socket . . . . . . . . . . . . . . . . . . . . . . . . .

. 24

6. Subwoofer Output Socket . . . . . . . . . . . . . . . . . . . . . . . . .

. 10

7. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . .

. 24

8. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8, 9

9. AC Power Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . .

8, 10

ÑSpeaker system

1.Tweeter

2.Woofer

3.Bass Reflex Duct

4.Speaker Terminals

ENGLISH

Information

and Indicators -

General

- Controls

 

 

E-5

Information

and Indicators -

General

- Controls

 

 

Controls and Indicators (continued)

1

11

 

 

 

 

 

2

12

 

 

3

13

17

 

4

14

21

18

5

15

19

 

6

16

22

 

7

 

20

23

8

 

 

 

 

 

 

 

 

24

25

9

 

 

 

10

 

26

27

Buttons with " " mark in the illustration can be operated on the remote control only.

Other buttons can be operated both on the main unit and the remote control.

Ñ Remote control

 

 

Reference page

1. Remote Control Transmitter . . . . . . . . . . . . . . .

. . . . . . . . . . . . 7

2. Power Button . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 11

3. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 14

4. Tuner Button . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 18

5. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 21

6. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 13, 21

7. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . 13, 17, 20

8. Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 11

9. Surround Button . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 12

10. Volume Up and Down Buttons . . . . . . . . . . . . .

. . . . . . . . . . . 12

11. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 24

12. Band Selector Button . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 18

13. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 17

14. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 23

15. Random/Repeat Button . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 16

16. CD Open/Close Button . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 11

17. Tuner Preset Up Button . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 20

18. CD Track Down Button . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 16

19. CD Fast Reverse, Tuning Down Button . . . . . .

. . . . . . . . 16, 18

20. CD Play Button . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 14

21. CD Track Up Button . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 16

22. CD Fast Forward, Tuning Up Button . . . . . . . . .

. . . . . . . . 16, 18

23. CD Pause Button . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 15

24. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . 15

25. Tuner Preset Down Button . . . . . . . . . . . . . . . .

. . . . . . . . . . . 20

26. Bass Up and Down Buttons . . . . . . . . . . . . . . .

. . . . . . . . . . . 12

27. Treble Up and Down Buttons . . . . . . . . . . . . . .

. . . . . . . . . . . 12

E-6

ENGLISH

 

 

Battery installation for remote control (See page 7.)

 

 

Remote Control

Ñ Battery installation

Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar). Batteries are not included.

1Remove the battery cover.

2Insert the batteries according to the direction indicated in the battery compartment.

When inserting or removing the batteries, push them towards the battery terminals.

3Replace the cover.

Precautions for battery use:

zReplace all old batteries with new ones at the same time.

zDo not mix old and new batteries.

zRemove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.

Caution:

zDo not use rechargeable batteries (nickel-cadmium battery, etc.).

zInstalling the batteries incorrectly may cause the unit to malfunction.

Notes concerning use:

zReplace the batteries if the operating distance is reduced or if the operation becomes erratic.

zPeriodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.

zExposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit.

zKeep the remote control away from moisture, heat, shock, and vibrations.

Ñ Test of the remote control

Check the remote control after checking all connections have been made correctly. (See pages 8 - 10.)

Face the remote control directly to the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the POWER button. Does the power turn on? Now, you can enjoy the music.

Remote sensor

0.2 m - 6 m (8" - 20' )

Preparation for Use - Remote Control -

ENGLISH E-7

Preparation for Use - System Connections -

System Connections

 

 

FM aerial

Right speaker

AM loop aerial

Left speaker

 

MD

Speaker with a built-in amplifier (This speaker

is not included.)

VCR, DVD, etc.

not supplied supplied

Wall socket

(AC 120 V, 60 Hz)

supplied

E-8 ENGLISH

Ñ Speaker connection

Connect the wire with the white line to the minus (-) terminal and the black wire to the plus (+) terminal.

Right speaker

Left speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White line

Black

Caution:

zConnect the speaker wires to the speakers first, then to the unit.

zUse speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.

zDo not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

zDo not let the bare speaker wires touch each other.

Incorrect

Incorrect

Ñ Placing the speaker system

There is no distinction between the right and the left speakers.

Left speaker

Right speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker grilles are removable:

Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles.

Notes:

zThe speakers are magnetically shielded.

Therefore, they do not affect the display even you use them near the TV. However, some colour variation may occur, depending on the type of TV used.

If colour variation occurs...

Turn off the TV (from the power switch). After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present...

Move the speakers further away from the TV.

zIf any kind of magnet or an electromagnet is placed too close to the TV and the system, irregular colours may appear on the TV screen.

ENGLISH

Preparation for Use - System Connections -

E-9

Preparation for Use - System Connections -

E-10

System Connections (continued)

Ñ Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial wire to the AM and GND terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Notes:

zPlacing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

zWhen static is still heard even after adjusting the position of the AM loop aerial, try reversing the wire connections.

Installing the AM loop aerial:

 

< Assembling >

< Attaching to the wall >

Notes:

zWhen an external FM aerial is used, disconnect the supplied FM aerial wire from the FM 75 OHMS socket.

zWhen using an external AM aerial, be sure to keep the wire of the AM loop aerial connected.

Ñ Subwoofer connection

When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass. Connect an RCA lead from a commercially available speaker with a built-in amplifier to the SUBWOOFER OUT socket.

Speaker with a built-in amplifier

 

 

Wall

Screws (not supplied)

External FM or AM aerial:

Use an external FM or AM aerial if you require better reception. Consult your dealer.

External

External AM aerial

AM loop aerial

FM aerial

 

15 m (49 feet)

7.5 m (25 feet)

Earth rod

Ñ Connecting the AC power lead

After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the AC power lead of this unit into the wall socket.

Notes:

zUnplug the unit if it will not be used for a prolonged period of time.

zNever use a power lead other than the one supplied. Otherwise, a malfunction or an accident may occur.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ENGLISH

General Control

Ñ To turn the power on

Press the POWER button to turn the power on.

To set the unit to stand-by mode:

Press the POWER button again.

Ñ To change the display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button on the remote control.

Dimmed

Brightened

Ñ Opening and closing the CD compartment

The CD compartment cover is motorised.

When the power is turned on, you can open or close the CD compartment cover by pressing the (OPEN/CLOSE) button.

Caution:

z Do not open or close the CD compartment cover manually. It may cause malfunctions to the unit.

z Be careful not to jam your fingers in the CD compartment cover.

Basic Operation - General Control -

ENGLISH E-11

Sound Control

 

 

 

 

 

 

 

 

 

 

 

 

 

Ñ Adjusting the bass

 

 

 

 

 

 

 

 

Main unit operation:

 

 

 

 

 

 

 

 

 

1 Press the BASS/TREBLE button until "BASS" appears on the

 

 

 

 

display.

 

 

 

 

 

 

 

 

 

2 Within 5 seconds, press the VOLUME (

or

) button to adjust

 

 

 

 

the bass.

 

 

 

 

 

 

 

 

 

Remote control operation:

 

 

 

 

 

 

 

 

Press the BASS ( or

) button to adjust the bass.

OperationBasic Sound-Control -

 

 

 

 

-5

...

0

...

5

 

 

 

 

 

 

 

 

 

 

-5 ...

0

...

5

 

 

 

 

Ñ Adjusting the treble

 

 

 

 

 

 

 

 

Main unit operation:

 

 

 

 

 

 

 

 

 

1 Press the BASS/TREBLE button until "TRE" appears on the dis-

 

 

 

 

play.

 

 

 

 

 

 

 

 

 

2 Within 5 seconds, press the VOLUME (

or

) button to adjust

 

 

 

 

the treble.

 

 

 

 

 

 

 

 

 

Remote control operation:

 

 

 

 

 

 

 

 

Press the TREBLE (

or ) button to adjust the treble.

 

 

 

 

Ñ Setting the surround

 

 

 

 

 

 

 

 

Press the SURROUND button to allow you to enjoy music that

 

 

 

 

seems to surround you. "SURROUND" will appear.

Ñ Adjusting the volume

 

 

 

To cancel the surround mode, press the SURROUND button again.

 

 

 

 

 

 

 

 

 

Press the VOLUME button to increase the volume and the VOL-

 

 

 

 

 

 

UME button for decreasing.

 

 

 

 

 

 

 

 

 

 

.....

 

 

SURROUND Indicator

 

 

MIN 1 2

28

29 MAX

Note:

 

 

 

 

 

 

The surround effect cannot be obtained from monaural sound sig-

 

 

 

 

 

 

 

 

nals.

 

 

 

 

 

E-12 ENGLISH

Setting the Clock

This may be operated only with the remote control.

In this example, the clock is set for the 12-hour (AM 12:00) display.

1 Press the CLOCK button and within 3 seconds, press the MEMORY button.

2 Within 1 minute, press the PRESET ( or ) button to

select 12-hour or 24-hour display and then press the MEMORY button.

"AM 12:00" The 12-hour display will appear. (AM 12:00 - PM 11:59)

"0:00" The 24-hour display will appear.

(0:00 - 23:59)

Note that this can only be set when the unit is first installed or it has been reset. (Refer to step 3 under "If trouble occurs" on page 26.)

3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button.

zWhen the 12-hour display is selected, "AM" will change automatically to "PM".

4 Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button.

zThe hour will not advance even if minutes advance from "59" to "00".

zThe clock starts from "0" second. (Seconds are not displayed.)

To confirm the time display when the power is on:

Press the CLOCK button.

The time display will appear for about 5 seconds.

Note:

The time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows.

To readjust the clock:

Perform "Setting the Clock" from the beginning.

To change the 12-hour or 24-hour display:

1Clear all the programmed contents. [Perform to step 3 under "If trouble occurs" on page 26 for details.]

2Perform "Setting the Clock" from the beginning.

Basic Operation - Setting the Clock -

ENGLISH E-13

Sharp XL-3000C Manual

Listening to a CD

CD Playback - Listening to a CD -

1 Press the POWER button to turn the power on.

2 Press the FUNCTION button until "CD STOP" or "NO DISC" appears on the display.

When operating with the remote control, press the CD button.

3 Press the(OPEN/CLOSE) button to open the CD compartment.

4 Place a CD on the spindle, label side up.

Be sure to place 8 cm (3") disc in the middle of a disc holder.

12 cm (5")

8 cm (3")

5 Press the (OPEN/

CLOSE) button to close the CD compartment.

Total number of

Total playing time

tracks

 

6 Press the( ) button to start playback from track 1.

When the last track on the disc has finished playing, the CD player will stop automatically.

E-14

ENGLISH

Sound Control (See page 12.)

To interrupt playback:

 

Main unit operation:

 

Press the

 

button.

 

To resume playback from the same point, press the

button again.

Remote control operation:

 

Press the

 

button.

 

To resume playback from the same point, press the

button.

To stop playback:

 

Press the

 

button.

 

 

 

 

 

To remove the CD:

Whilst in the stop mode, press the (OPEN/CLOSE) button. Press the CD eject button and remove the CD.

CD Eject Button

Notes:

zAfter removing the CD, make sure to press the (OPEN/CLOSE) button and close the CD compartment.

zWhen the unit enters the stand-by mode, the opened CD compartment cover will be closed automatically.

After use:

Press the POWER button to enter the power stand-by mode.

Caution:

zDo not open or close the CD compartment cover manually. It may cause malfunctions to the unit.

zBe careful not to jam your fingers in the CD compartment cover.

zIf the power fails whilst the compartment is open, wait until the power is restored.

zIf a disc is damaged, dirty, or loaded upside down, "NO DISC" or "READ ERR" will appear on the display.

zKeep foreign objects out of the CD compartment.

zSubjecting the unit to shock or vibration may cause mistracking.

zWhen the unit is not being used, be sure to close the CD compartment. If it is left open, the lens may be covered with dust and the unit may not operate properly.

zIf TV or radio interference occurs during CD operation, move the unit away from the TV or radio.

ENGLISH

CD Playback - Listening to a CD -

E-15

Playback

/ Repeat or Random Play -

CD a CD

 

- Listening to

 

 

E-16

Listening to a CD (continued)

 

Repeat or Random Play

Ñ To locate the beginning of a track

To move to the beginning of the next track:

Press the button for less than 0.5 seconds during playback.

zYou can skip to any track by pressing the button repeatedly until the desired track

number appears.

To restart the track being played:

Press the button for less than 0.5 seconds during playback.

zYou can skip to any track by pressing the button repeatedly until the desired track

number appears.

Ñ To locate the desired portion

For audible fast forward:

Press and hold down the button during playback.

For audible fast reverse:

Press and hold down the button during playback.

Notes:

zNormal playback will resume when the or button is released.

zWhen the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, playback will start when you release the button.

zThe or button on the remote control allows you to locate the desired portion.

You can select one of the CD playback mode; "Repeat play", "Random play" and "Normal play".

1 When in the CD mode, press the RANDOM/REPEAT button on the remote control repeatedly to select the playback mode.

Repeat playback mode Random playback mode

Normal playback mode

2 Press the button to start playback.

To repeat a programmed sequence:

Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat playback.

Notes:

zIn random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.)

zIf you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located.

Caution:

After performing repeat or random play, be sure to press the button. Otherwise, the disc will play continuously.

To cancel repeat or random play:

Press the RANDOM/REPEAT button on the remote control repeatedly to select the normal playback mode.

ENGLISH

Loading...
+ 42 hidden pages