Sharp XGC60X Service Manual

XG-C60X

SERVICE MANUAL
SERVICE-ANLEITUNG

S93i5XG-C60XU

LCD PROJECTOR
LCD PROJEKTOR

MODEL
MODELL

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

XG-C60X

Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand gebracht werden. Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.

OUTLINE

This service manual covers only changes from XG-C55X. For other information, refer to the service manual of XG­C55X.

UMRISS

Diese Service-Anleitung umfasst nur Änderungen zum XG-C55X. Weitere Informationen finden Sie in der Service­Anleitung für den XG-C55X.

CONTENTS

Page

» CHANGING PARTS LIST .................................. 2

» SPECIFICATIONS ............................................. 3

» SOFTWARE UPDATE PROCEDURE ............... 4

» SCHEMATIC DIAGRAM .................................... 8

» PRINTED WIRING BOARD ASSEMBLIES ..... 10

» PARTS LIST

Ë

ELECTRICAL PARTS ...................................11

Ë

CABINET AND MECHANICAL PA RTS ....... 12

Ë

ACCESSORIES PARTS .............................. 17

Ë

PACKING PARTS ........................................ 17

» PACKING OF THE SET ................................... 18

» ÄNDERN DER TEILELISTE .............................. 5

» TECHNISCHE DATEN ...................................... 6

» SOFTWARE-AKTUALISIERUNGS-

VERFAHREN ..................................................... 7

» SCHEMATISCHER SCHALTPLAN ................... 8

» LEITERPLATTENEINHEITEN ......................... 10

» ERSATZTEILLISTE

Ë

ELEKTRISCHE BAUTEILE ..........................11

Ë

GEHÄUSE UND MECHANISCHE

BAUTEILE ................................................... 12

Ë

ZUBEHÖRTEILE ......................................... 17

Ë

VERPACKUNGSTEILE ............................... 17

» VERPACKEN DES GERÄTS........................... 18

INHALT

Seite

SHARP CORPORATION

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

XG-C60X

CHANGING PARTS LIST

Ref.No. Desccription XG-C55X XG-C60X Note
PRINTED WIRING BOARD ASSEMBLY

Input Unit DUNTKB170DE04 DUNTKB170DE05 The daughter parts are same as XG-C55X.
Output Unit DUNTKB929FE01 DUNTKB929FE02 The daughter parts are same as XG-C55X.
Key Unit DUNTKB602DE01 DUNTKB602DE02 The daughter parts are same as XG-C55X.
R/C Unit DUNTKB603DE01 DUNTKB603DE02 The daughter parts are same as XG-C55X.
AC Inlet Unit RUNTKA058WJZZ ←
Fan Unit RUNTKA026WJN1 RUNTKA026WJN2
Power Unit RDENCA044WJZZ ←
PC I/F Unit CPCi-A002CE30 CPCi-A002CE31 The daughter parts are same as XG-C55X.
Ballast Unit RDENCA045WJZZ ←

Fan Unit
R7219 Resistor VRS-CY1JF273FY VRS-CY1JF103FY
R7220 Resistor VRS-CY1JF103FY VRS-CY1JF273FY

Cabinet and Mechanical Parts

Refer to Parts List

Optics Mechanism Parts

Refer to Parts List

2

Specifications

XG-C60X

Product type

Model

Video system

Display method

LCD panel

Standard lens

Projection lamp

Component input signal

(INPUT1/2)

Horizontal resolution

Computer RGB input signal

(INPUT 1/2)

Video input signal

(INPUT 3)

S-video input signal

(INPUT 4)

Computer control signal (RS-232C)

Pixel clock

Ver tical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
XG-C60X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1,024 [H] × 768 [V])
1—1.27× zoom lens, F1.7—2.2, f = 36.5—46.3 mm
SHP 300 W
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P

: 0.7 Vp-p, 75 Ω terminated

B

P

: 0.7 Vp-p, 75 Ω terminated

R

750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—230 MHz
43—200 Hz*
15—126 kHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)

3.0 W (monaural)
4 cm × 7 cm
AC 100–240 V

4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode) with AC 100 V
380 W (Standard mode)/310 W (Low power mode) with AC 240 V

0.5 W (AC 100 V) – 0.8 W (AC 240 V) (When “Mntr.out/RS232” is set to “OFF”)
1,505 BTU/hour (Standard mode)/1,220 BTU/hour (Low power mode) with AC 100 V
1,430 BTU/hour (Standard mode)/1,165 BTU/hour (Low power mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz

3

15

⁄8" × 3 7⁄8" × 11 9⁄16" (390 (W) × 99 (H) × 294 (D) mm) (main body only)

1

15

⁄2" × 4 7⁄16" × 11 5⁄8" (393 (W) × 114 (H) × 303 (D) mm) (including adjustment foot

and projecting parts)

11.3 lbs. (5.1 kg)
Remote control, Two R-6 batteries, Power cord for U.S., Canada etc. (11'10", 3.6 m), Power cord
for Europe except U.K. and Korea (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6',

1.8 m), Power cord for Australia, New Zealand and Oceania (6', 1.8 m), RGB cable (9'10", 3 m),
USB cable (3'3", 1 m), DIN-D-sub RS-232C adaptor (5 57⁄64", 15 cm), Remote receiver, Extra air
filter, Lens cap (attached), Projector manual and technical reference CD-ROM, Sharp Advanced
Presentation Soft-ware CD-ROM, Sharp Advanced Presentation Software quick installation guide,
Quick guide label,Operation manual

Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), Two R­6batteries (“AA” size, UM/SUM-3, HP-7, or similar), Power cord for U.S., Canada
etc.(QACCDA010WJPZ), Power cord for Europe except U.K. and Korea (QACCVA011WJPZ),
Power cord for U.K., Hong Kong and Singapore, (QACCBA012WJPZ), Power cord for Australia,
New Zealand and Oceania (QACCLA018WJPZ), RGB cable (QCNWGA012WJPZ), USB cable
(QCNWG0007CEPZ), DIN-D-sub RS-232C adaptor (QCNWGA015WJPZ), Remote receiver
(RUNTKA061WJZZ), Air filter(PFILDA005WJZZ), Lens cap (PCAPHA003WJSA), Projector manual
and technical reference CD-ROM (UDSKAA042WJZZ), Sharp Advanced Presentation Software
CD-ROM (UDSKAA043WJZZ),Sharp Advanced Presentation Software quick installation guide
(TINS-A867WJZZ), Quick guide label (TLABZA364WJZZ), Operation manual (TiNS-B043WJZZ)

* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.

As a part of policy of continuous improvement, SHARP reserves the right to make design and speci­fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.

3

XG-C60X

SOFTWARE UPDATE PROCEDURE

Only the display in the following window screen is different from XG-C55X. Other displays are the same as

XG-C55X.

12. On the Tera Term Pro, select the File and then the Send file.
Check the Binary in the Option and then select the software file for update you decompressed.
Then click open.

4

ÄNDERN DER TEILELISTE

Ref.Nr. Beschreibung XG-C55X XG-C60X Hinweis

LEITERPLATTEN-BAUGRUPPE

Eingangseinheit

Ausgangseinheit

Schlüsseinheit

Fernbedienungs-einheit

AC Eingangseinheit

Gebläse-einheit

Netzeinheit RDENCA044WJZZ ←

PC-I/F-einheit CPCi-A002CE30 CPCi-A002CE31

Ballast-einheit RDENCA045WJZZ ←

Gebläse-Einheit

R7219 Widerstand VRS-CY1JF273FY VRS-CY1JF103FY

R7220 Widerstand VRS-CY1JF103FY VRS-CY1JF273FY

DUNTKB170DE04 DUNTKB170DE05

DUNTKB929FE01 DUNTKB929FE02

DUNTKB602DE01 DUNTKB602DE02

DUNTKB603DE01 DUNTKB603DE02

RUNTKA058WJZZ ←

RUNTKA026WJN1 RUNTKA026WJN2

Die Tochterteile sind die gleichen wie beim XG-C55X.

Die Tochterteile sind die gleichen wie beim XG-C55X.

Die Tochterteile sind die gleichen wie beim XG-C55X.

Die Tochterteile sind die gleichen wie beim XG-C55X.

Die Tochterteile sind die gleichen wie beim XG-C55X.

XG-C60X

Gehäuse Und Mechanische Bauteile

Siehe Teileliste.

Teile Für Optikmechanismus

Siehe Teileliste.

5

XG-C60X

Technische Daten

Produkttyp

Videosystem

Wiedergabeverfahren

LCD-Panel

Standard-Objektiv

Projektionslampe

Komponenten-Eingangssignale

(INPUT 1/2)

Horizontale Auflösung

Computer-RGB-Eingangssignal

(INPUT 1/2)

Videoeingangssignal

(INPUT 3)

S-Videoeingangssignal

(INPUT 4)

Computer-Steuerungssignal (RS-232C)

Vertikale Frequenz

Horizontale Frequenz

Audioeingangssignal

Audioausgang

Lautsprechersystem

Nennspannung

Eingangsspannung

Nennfrequenz

Leistungsaufnahme

Leistungsaufnahme

(Bereitschaft)

W ä rmeableitung

Betriebstemperatur

Lagertemperatur

I/R-Trägerfrequenz

Abmessungen (ca.)

Gewicht (ca.)

Mitgeliefertes Zubehör

Ersatzteile

*Bei vertikalen Frequenzen über 100 Hz kann eine zeitweise Störung sichtbar werden, wenn die OSD-Funktionen eingeschaltet sind.

LCD PROJEKTOR
XG-C60X

Modell

NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD-Panel × 3, optische RGB-Verschlussmethode
Panel-Größe: 0,99tum(25,1 mm)(15 [H] × 20 [B] mm)
Anzahl der Bildpunkte: 786.432 Bildpunkte (1.024 [H] × 768 [V])
1—1,27× Zoom-Objektiv, F1,7—2,2, f = 36,5—46,3 mm
Wechselstromlampe SHP 300 W
15-poliger Mini-D-Sub-Anschluss
Y: 1,0 Vs-s, negatives Sync., 75

: 0,7 Vs-s, 75 Ω terminiert

P

B

: 0,7 Vs-s, 75 Ω terminiert

P

R

750 Fernsehzeilen (DTV720P)
15-poliger Mini-D-Sub-Anschluss
RGB getrennt/Sync auf Grün-Typ analoger Eingang: 0-0,7 Vs-s, positiv, 75
HORIZONTALES SYNC.-SIGNAL: TTL-Pegel (positiv/negativ)
VERTIKALES SYNC.-SIGNAL: Wie oben
RCA-Anschluss: VIDEO, gemischtes Video, 1,0 Vs-s, negatives Sync., 75

4-pol. Mini DIN-Anschluss
Y (Luminanzsignal): 1,0 Vs-s, negatives Sync., 75
C (Chrominanzsignal): Stoß 0,286 Vs-s, 75
9-Pin Mini-DIN-Stecker
12-230 MHz

Pixeltakt

43-200 Hz*
15-126 kHz
ø3,5 mm Minibuchse: AUDIO, 0,5 Vrms, mehr als 47 k
3,0 W (Mono)
4 cm × 7 cm
100-240 V Wechselstromspannung
4,0 A
50/60 Hz
400 W (Standard-Modus)/325 W (Modus mit niedrigem Stromverbrauch)bei AC 100 V
380 W (Standard-Modus)/310 W (Modus mit niedrigem Stromverbrauch)bei AC 240 V
0,5 W (bei AC 100 V)-0,8 W (bei AC 240 V) (wenn “Monitor/RS232” auf “OFF” gestellt ist)

1.505 BTU/Stunde (Standard-Modus)/1.220 BTU/stunde (Modus mit niedrigem Stromverbrauch)bei AC 100 V

1.430 BTU/Stunde (Standard-Modus)/1.165 BTU/stunde (Modus mit niedrigem Stromverbrauch)bei AC 240 V
41°F bis 95°F (+5°C bis +35°C)
– 4°F bis 140°F (–20°C bis +60°C)
Plastik

Gehäuse

38 kHz

3

15

⁄8" × 3 7⁄8" × 11 9⁄16" (390 (B) × 99 (H)× 294 (T) mm) (nur Hauptgerät)

1

⁄2" × 4 7⁄16" × 11 5⁄8" (393 (B) × 114 (H) × 303 (T) mm) (einschließlich Drehfüße und Projektionsteile)

15
11,3 lbs. (5,1 kg)
Fernbedienung, zwei R6-Batterien, Netzkabel für USA, Kanada usw. (11'10", 3,6 m), Netzkabel für Europa, ausgenommen
Großbritannien (6', 1,8 m), Netzkabel für Großbritannien, Hongkong und Singapur (6', 1,8 m), Netzkabel für Australien, Neuseeland
und Ozeanien (6', 1,8 m), RGB-Kabel (9' 10", 3 m), USB-Kabel 3'3", 1 m), (DIN-D-Sub RS-232C-Adapter (5
Fernbedienungsempfänger, Zusätzlicher Luftfilter, Objektivkappe (befestigt), Projektorhandbuch-und technische Referenz-CD­ROM, Sharp Advanced Presentation Software CD-ROM, Schnell-Installationsanleitung für die Sharp Advanced Presentation
Software, “QUICK GUIDE (Schnellanleitung)”-Aufklebers, Bedienungsanleitung
Lampeneinheit (Lampen-/Gehäusemodul) (BQC-XGC55X//1), Fernbedienung (RRMCGA176WJSA), zwei R 6-Batterien (“AA”,
UM/SUM-3, HP-7 oder ähnlich), Netzkabel für USA, Kanada usw. (QACCDA010WJPZ), Netzkabel für Europa, ausgenommen
Großbritannien (QACCVA011WJPZ), Netzkabel für Großbritannien, Hongkong und Singapur (QACCBA012WJPZ), Netzkabel
für Australien, Neuseeland und Ozeanien (QACCLA018WJPZ),RGB-Kable (QCNWGA012WJPZ), USB-Kabel
(QCNWG0007CEPZ), DIN-D-Sub RS-232C-Adapter (QCNWGA015WJPZ), Fernbedienungsempfänger (RUNTKA061WJZZ),
Luftfilter (PFILDA005WJZZ), Objektivkappe (PCAPHA003WJSA), Projektorhandbuch-und- technische Referenz-CD-ROM
(UDSKAA042WJZZ), Sharp Advanced Presentation Software CD-ROM (UDSKAA043WJZZ), Schnell-Installationsanleitung für
die Sharp Advanced Presentation Software (TINS-A867WJZZ), “QUICK GUIDE (Schnellanleitung)”-Aufklebers
(TLABZA364WJZZ), Bedienungsanleitung (TiNS-B043WJZZ)

Ω

terminiert

Ω

Ω

terminiert

terminiert

Ω

(Stereo)

Ω

terminiert

Ω

terminiert

57

⁄64", 15 cm),

Bedingt durch fortlaufende technische Verbesserungen behält sich SHARP das Recht vor, das De­sign und die Spezifikationen ohne vorherige Ankündigung ändern zu können. Die angegebenen
Leistungswerte stellen die Nennwerte einer in Serienherstellung produzierten Einheit dar. Geringe
Abweichungen bei einzelnen Geräten sind möglich.

6

XG-C60X

SOFTWARE-AKTUALISIERUNGSVERFAHREN

Nur das Display auf dem folgenden Bildschirm unterscheidet sich vom XG-C55X. Andere Displays sind die
gleichen wie beim XG-C55X.

12. Unter Tera Term Pro wählen Sie "File" und dann "Send file".

Markieren Sie "Binary" in der Option, dann wählen Sie die Softwaredatei zur Aktualisierung aus, die dekomprimiert

wurden.

Klicken Sie dann auf "open".

7

87109654321

A

B

C

D

E

F

G

H

1716 19181514131211

XG-C60X

Ë

FAN UNIT / GEBLÄSE-EINHEIT

XG-C60X

8

9

XG-C60X

PRINTED WIRING BOARD ASSEMBLIES

H

LEITERPLATTENEINHEITEN

G

F

E

FAN UNIT (Side-A)

GEBLÄSE-EINHEIT (Seite-A)

D

C

B

A

FAN UNIT (Side-B)

GEBLÄSE-EINHEIT (Seite-B)

654321

10

XG-C60X

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

PARTS LIST

ERSATZTEILLISTE

PARTS REPLACEMENT

Parts marked with "å" are important for maintaining the safety of
the set. Be sure to replace these parts with specified ones for main­taining the safety and performance of the set.

"HOW TO ORDER REPLACEMENT PARTS"

To have your order filled promptly and correctly, please furnish the
following informations.

1. MODEL NUMBER 2. REF. NO.

3. PART NO. 4. DESCRIPTION

5. CODE 6. QUANTITY

in USA: Contact your nearest SHARP Parts Distributor.

For location of SHARP Parts Distributor,
Please call Toll-Free; 1-800-BE-SHARP

in CANADA: Contact SHARP Electronics of Canada Limited

Phone [phone].

Ref. No. Part No. ★ Description Code

PRINTED WIRING BOARD ASSEMBLIES

(NOT REPLACEMENT ITEM)

AUSTAUSCH VON TEILEN

Ersatzteile, die besondere Sicherheitseigenschften haben, sind in
dieser Anleitung markiert. Elektrische Komponenten mit solchen
Eigenshaften sind in den Ersatzteil durch "å" gekenn-zeichnet.
Der Gebrauch von Ersatzteilen, die nicht deselben Sicherheits­eigenschaften haben wie die vom Hersteller empfohlenen ud in der
Bedienungsanleitung angegebenen, können zur Ursache von
Blitzeinschlägen, Bränden und anderen Gefahren werden.

"WIE MAN ERSATSTEILE BESTELLT"

Damit Ihre Bestellung promt und korrekt ausgeführt wird, geben Sie
bitte folgende Informationen.

1. MODELL NR. 2. REF. NR.

3. ERSATZTEIL NR. 4. BESCHREIBUNG

5. KODE 6. QUANTITÄT

★ MARKIERUNG : ERSATZTEILE-LIEFERUNG★ MARK: SPARE PARTS-DELIVERY SECTION

Ref. No. Part No. ★ Description Code

RUNTKA026WJN2

FAN UNIT

DUNTKB170DE05 - Input Unit —
DUNTKB929FE02 - Output Unit —
DUNTKB602DE02 - Key Unit —
DUNTKB603DE02 - R/C Receiver Unit —
RUNTKA058WJZZ - AC Inlet Unit —
RUNTKA026WJN2 - Fan Unit —
RDENCA044WJZZ - Power Unit —
CPCi-A002CE31 J PC I/F Unit

å RDENCA045WJZZ J Ballast Unit BZ

R7219 VRS-CY1JF103FY J 10k 1/16W Metal Oxide AA

RESISTORS

R7220 VRS-CY1JF273FY J 27k 1/16W Metal Oxide AA

11

XG-C60X

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

3-19 PSPAH0648CE00 J Spacer, x2 AB

CABINET AND MECHANICAL PARTS

1
1-1 DBDYRA005WJ01 J Rear Body Ass'y AY
1-1-1
1-1-2 HiNDPA506WJSA J Terminal Indication Panel AH
1-1-3 HiNDPA085WJZZ J Earth Label AD
1-1-4 HiNDPA516WJZZ J Shield Label AE
1-1-5 PSPAKA008WJ00 J Spacer, x2 AD
1-2 LX-HZ3106CEFD J Screw, x1 AB
1-3 LX-NZ3173CEFW J Insert Nut, x1 AD

2
2-1 DBDYTA052WJ01 J Top Body Ass'y
2-1-1
2-1-2 GCOVAA032WJKA J LED Cover, x3 BB
2-1-3
2-1-4 HiNDPA641WJSA J "IQ" Label
2-1-5 DBTN-A013WJ01 J Operation Button Ass'y AX
2-1-5-1
2-1-5-2 HDECQA025WJKA J Decoration Button-A AH
2-1-5-3 HDECQA026WJKA J Decoration Button-B AH
2-1-5-4 HDECQA027WJKA J Decoration Button-C AH
2-1-7 PSPAZA106WJZZ J Spacer, x4 AA
2-1-8 PSPATA005WJZZ J Tape, x2 AC
2-2 JBTN-A014WJKA J Height Adjust Button AE
2-3 LANGKA006WJFW J Fixing Angle AD
2-4 MSPRCA001WJFW J Spring, for Height AB

2-5 PSPAT0013CEZZ J Tape, x4 AC
2-6 QCNW-A492WJZZ J Leaf Switch AH
2-7 XBPSF26P06000 J Screw, x1 AA
2-8 XEBSD30P08000 J Screw, x1 AA
2-9 XEPSD26P08000 J Screw, x1 AA

3
3-1 DBDYUA003WJ13 J Bottom Body Ass'y (for U.S.,

3-1 DBDYUA003WJ15 J Bottom Body Ass'y (for U.K.,

3-1-1
3-1-2 HiNDPA714WJSA J Model Label (for U.S.,

3-1-2 HiNDPA772WJSA J Model Label (for U.K., Hong

3-1-3 HiNDPA292WJSA J FCC Label AL
3-1-4 HiNDPA114WJSB J Hot Caution Label AD
3-1-5

3-1-6 LX-NZ3120CEFW J Insert Nut(R) AB
3-1-7 LX-NZ3122CEFW J Insert Nut(L) AC
3-1-8 PFiLDA003WJZZ J PBS Filter AG
3-2 DCOVAA029WJ01 J Bottom Filter Cover Ass'y AR
3-2-1
3-2-2 HPNC-A002WJSA J Intake Punching Cover AL
3-3 GCOVA1824CESA J R/C Cover AD
3-4 GCOVAA030WJKA J Exhaust Panel AM
3-5 GCOVAA038WJKA J Handle Cover, x2 AF
3-6 GLEGPA003WJKA J Adjuster Foot(Front) AW
3-7 GLEGPA004WJKA J Adjuster Foot(Rear, Right) AH
3-8 GLEGPA005WJKA J Adjuster Foot(Rear, Left) AH
3-9 HPNC-A001WJSA J Punching Cover AL
3-10 JHNDAA003WJZZ J Carrying Handle BA
3-11 LANGKA040WJFW J Anti-Theft Angle AD
3-12 LX-HZ3105CEFD J Screw, for Insert Nut, x1 AB
3-13 LX-NZ3095CEFD J Nut Screw(R) AA
3-14 LX-NZ3123CEFE J Nut Screw(L) AD
3-15 LX-NZ3173CEFW J Insert Nut, x1 AD
3-16 LX-NZA003WJFW J Nut, x3 AD
3-17 PFiLDA002WJZZ J Filter AE
3-18 PSLDMA074WJZZ J Shield AK

Not Available

Not Available

Not Available

Not Available

Not Available

Not Available

Not Available

Not Available

Not Available

Not Available

– Rear Body Unit Ass'y —

– Rear Body —

–Top Body Unit Ass'y —

–Top Body —

– "SHARP" Badge —

– Operation Button —

Adjust Button

– Bottom Body Unit Ass'y —

Canada, Europe except U.K.,
Korea, Australia, New Zealand
and Oceania)

Hong Kong and Singapore)

– Bottom Body —

Canada, Europe except U.K.,
Korea, Australia, New Zealand
and Oceania)

Kong and Singapore)

– Kensington Standard —

Security Connector

– Bottom Filter Cover —

3-20 PSPAT0013CEZZ J Tape, x2 AC
3-21 PZETKA013WJZZ J Shield Spacer, x1 AG
3-22 PZETKA014WJZZ J Shield Spacer, x1 AH
3-23 PZETKA015WJZZ J Shield Spacer, x1 AD
3-24 QCNW-A493WJZZ J Leaf Switch AF
3-25 XBPSD30P08JS0 J Screw, x8 AA
3-26 XBPSD40P05J00 J Screw, x3 AA
3-27 XEBSD30P12000 J Screw, x7 AA
3-28 XEPSD26P08000 J Screw, x1 AA
3-29 LANGKA075WJFW J Angle AG
3-30 PGiDJA001WJKZ J Ventilation Guide AE

4
4-1 DBFL-A001WJ01 J Speaker Net Ass'y AH
4-2 QCNW-5062CEZZ J Connection Cord(SP) AE
4-3 VSP7040PB568A J Speaker AL
4-4 XEBSD30P08000 J Screw, x4 AA

5 Refer to Optical Mechanism parts
6
6-1 DDORRA001WJ02 J Lamp Door Ass'y AP
6-1-1
6-1-2 HiNDPA514WJZZ J Caution Label AF
6-1-3 HiNDPA515WJZZ J Caution Label AE
6-1-4 PSPAHA070WJ00 J Spacer AB
6-1-5 PSPAHA071WJ00 J Spacer AB
6-1-6 PSPAHA072WJ00 J Spacer AA
6-2 LX-BZ3366CEFN J Screw, x1 AD
6-3 XRESJ30-06000 J E-ring, x1 AA
6-4 PSLDPA014WJFW J Heat Sink, Door, x1 AE
6-5 XEBSD30P08000 J Screw, x1 AA

7 CCOVAA027WJ01 J Lens Cover(Upper) Ass’y AQ
7-1
7-2 PSPAHA084WJZZ J Spacer, x4 AA

8 GCOVAA028WJKA J Lens Cover(Lower) AH
9 HPNC-A003WJFW J
10 LANGTA007WJFW J AC Socket Attaching Angle AD
11 LHLDW1003GEZZ J Wire Holer, x1 AA
12 LHLDW1060CEZZ J Wire Holer, x1 AB
13 LHLDZA009WJKZ J PWB Holder BB
14 LX-BZA020WJZZ J Screw, x2 AC
15 LX-HZA007WJFD J Screw, x4 AB
16 NFANRA022WJZZ J Cooling Fan AR
17 PCAPHA003WJSA J Lens Cap AH
18 PSPAGA036WJZZ J Fan Spacer, x6 AD
19 PZETKA045WJZZ J Shield, for Ballast Unit AN
20 PZETKA005WJ00 J Shield, for Output Unit AP
21 PZETZA004WJKZ J Insulating Sheet AD
22 DUNTKB170DE05 – Input Unit —
23 DUNTKB929FE02 – Output Unit —
24 DUNTKB602DE01 – Key Unit —
25 DUNTKB603DE01 – R/C Receiver Unit —
26 RUNTKA058WJZZ – AC Inlet Unit —
27 CPCi-A002CE31 J PC I/F Unit
28 RDENCA044WJZZ – Power Unit —

å 29 RDENCA045WJZZ J Ballast Unit BZ

30 QCNW-A491WJZZ J Bi-Metal AM
31 QCNW-A774WJZZ J Connecting Cord (FG) AD
32 QCNW-A936WJZZ J Connecting Cord (KY) AC
34 QCNW-C170WJQZ J Connecting Cord (RC)
35 XBBSD40P12000 J Screw, x1 AB
36 XBBSF30P10000 J Screw, x4 AA
37 XBPSD30P06R00 J Screw, x13 AB
38 XEBSD30P08000 J Screw, x5 AA
39 XEBSD30P12000 J Screw, x13 AA
40 XEBSF30P12000 J Screw, x10 AA
41 NSFTZ0134CEFW J Shaft Screw, x6 AD
42 NSFTZA001WJFW J Shaft Screw, x4 AD
43 GCOVHA014WJKZ J Shading Cover AD
44 LANGTA005WJFW J Attaching Angle, x2 AE
45 LANGTA006WJFW J Attaching Angle, x1 AG
46 PSLDMA008WJFW J Shield AK
47 LHLDW1021GE00 J Wire Holder, x1 AB
49 PSPAZA061WJZZ J Spacer, x2 AD
50 PSLDMA009WJFW J Terminal Shield AH

Not Available

Not Available

Not Available

Not Available

– Speaker Net Unit Ass'y —

– Lamp Door Unit Ass'y —

– Lamp Door —

– Les Cover (Upper) —

Cooling Fan Attaching Angle

AP

12

CABINET AND MECHANICAL PARTS/
GEHÄUSE UND MECHANISCHE BAUTEILE

H

2-7

G

2

2-9

2-3

2-6

2-8

2-1

2-1-3

7

7-1

7-2

F

39

19

G

15

C

E

29

D

D

13

14

C

18

16

18

B

A

3

3-10

3-5

Q

E

I

54

Y

9

3-1-3

3-1

3-22

39

2-2

2-4

A

2-1-5

2-1-5-3

2-1-5-1

2-1-5-2

21

32

B

F

D

3-18

3-21

3-27

37

31

J

3-1-4

3-30

3-27

40

3-27

3-6

3-5

2-1-5-4

3-25

2-1-7

3-4

M

2-5

2-1-1

2-1-4

2-1-2

2-1-2

37

H

B

F

J

I

24

E

43

38

28

39

S

27

39

10

Y

39

3-14

3-27

3-1-5

35

34

37

23

42

8517

3-26

3-27

3-11

3-23

3-1-7

W

X

T

3-3

3-1-2

51

25

6-1-1

6-1-5

6-3

1-1-5

1-3

1-2

44

37

37

K

M

49

46

37

47

H

J

P

3-12

3-1-8

3-16

S

3-15

3-20

3-8

3-20

3-9

XG-C60X

6-1-6

3-13

3-1-6

3-7

3-1-1

3-24

6-1-2

6-1

6-2

22

11

P

20

3-26

3-16

3-28

6-5

6-1-3

1-1-4

1-1-3

41

37

50

Q

26

4-4

4-2

3-26

W

3-27

3-16

X

3-29

3-17

3-2-1

3-2-2

T

6-1-4

45

N

L

C

N

L

54

3-19

K

6

6-4

1-1-2

40

36

1-1

1-1-1

1

30

12

G

4-3

55

53

4-1

4

3-2

13

654321

XG-C60X

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

CABINET AND MECHANICAL PARTS

(Continued)

51
53 95KEDB7781ZZ J Connecting Cord AF
54 XJPSF30P08000 J Screw, x2 AA
55 95KRAZ4141ZT J Screw, x1 AC
56 PSLDHA015WJFW J
57 PSLDHA016WJFW J
58 PSPAZA319WJZZ J Spacer, x3
59 PSPAGA134WJZZ J Spacer, x2

Not Available

–

Serial No. Label

Shield
Shield

—

AD
AD

OPTICAL MECHANISM PARTS

5 CCHSKA001WJ61 J Optical Mechanism Unit
5-1
5-1-1 LANGKA116WJFW J IC Fan Angle AG
5-1-2 LHLDW1037CEZZ J Wire Holder, x1 AA
5-1-3 LHLDW1182CEZZ J Cable Clamp, x1 AC
5-1-4 NFANRA005WJZZ J Cooling Fan, x1 AT
5-1-5 NFANSA002WJZZ J Blow Fan, x2 AX
5-1-6 NFANSA003WJZZ J Blow Fan, x1 AX
5-1-7 PDUC-A001WJKZ J Intake Duct(Bottom) AN
5-1-8 PDUC-A002WJKZ J Intake Duct(Top) AM
5-1-9 PSPAZ0373CEZZ J Spacer, for Fan, x12 AC
5-1-10 PSPAZA017WJZZ J Spacer, for Fan, x3 AB
5-1-11 QCNW-C171WJQZ J Connecting Cord(SO)
5-1-12 QCNW-A499WJZZ J Connecting Cord(EB) AH
5-1-13 RH-HXA002WJZZ J Thermister AL
5-1-14 RUNTKA026WJN2 J Fan Unit —
5-1-15 XBPSD26P14000 J Screw, x2 AA
5-1-16 XEBSD30P12000 J Screw, x2 AA
5-2
5-2-1 LANGKA004WJFW J Fixing Angle, x2 AD
5-2-2 LANGKA005WJFW J Fixing Angle, x2 AD
5-2-3 NFANRA003WJZZ J Exhaust Fan AX
5-2-4 PDUC-A003WJKZ J Exhaust Duct AQ
5-2-5 PSLDPA003WJFW J Heat Sink AE
5-2-6 PSPAZ0373CEZZ J Spacer, for Fan, x8 AC
5-2-7 XEBSD30P12000 J Screw, x5 AA
5-3
5-3-1 CMiR-A004WJ61 J Prism Unit
5-3-1-1 LANGKA001WJFW J Fixing Spring, x3 AD
5-3-1-2 LANGKA036WJ00 J Light Shielding Angle AK
5-3-1-3 PFiLWA068WJZZ J Output Polarizer(G)
5-3-1-4 PFiLWA019WJZZ J Output Polarizer(B) BG
5-3-1-5 PFiLWA069WJZZ J Output Polarizer(R)
5-3-1-6 XSSSF20P06000 J Screw, x12 AA
5-3-1-7 XiPSF20P04000 J Screw, x3 AA

Note:When exchanging the following parts, it becomes unit

5-3-1-8
5-3-1-9
5-3-1-10
5-3-1-11
5-3-1-12
5-3-1-13
5-3-1-14
5-3-1-15
5-3-1-16
5-3-2 LHLDZA002WJFW J Prism Holder AZ
5-3-3 LHLDZA036WJFW J Lens Mount BD
5-3-4 LX-BZ3248CEFF J Screw, x4 AB
5-3-5 XBPSF30P08JS0 J Screw, x4 AA

å 5-4 BQC-XGC55X//1 J Lamp Unit CL

5-4-1
5-4-1-1 LX-BZ3449CEFN J Screw, x2 AC
5-4-1-2 PCASZA002WJKZ J Lamp Case AR
5-4-1-3 PSLDHA001WJFW J Heat Sink AE

Not Available

Not Available

Not Available

– Intake Duct Ass'y —

– Exhaust Duct Ass'y —

– Prism Holder Unit —

replacement correspondence.

Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available

XiPSF20P04W00 J Screw, x3 AC
XSSSF20P04000 J Screw, x6 AB

Not Available

– Fixing Angle(Upper) —
– Fixing Angle(Lower) —
– LCD Attaching Angle, x3 —
– Cross Dichroic Prism —
– R-LCD Panel —
– G-LCD Panel —
– B-LCD Panel —

– Lamp Case Ass'y —

5-4-1-4 XREUW20-04000 J E-ring, x2 AA
5-4-3 LANGUA006WJFW J Lamp Adjusting Angle AP
5-4-4 MSPRKA002WJFW J Reflector Fixing Angle, x2 AD

å 5-4-6 RLMPFA009WJZZ J Lamp CG

5-4-7 TLABZA429WJZZ J Caution Label AC
5-4-9 XBPSF30P08JS0 J Screw, x6 AA
5-4-14 XEBSD30P12000 J Screw, x1 AA
5-5 GCOVUA003WJKZ J Light Shield Plate AD
5-6 LANGKA037WJFW J
5-7 LCHSKA001WJKZ J Optical Mecha. Unit, Base AY
5-8 LCHSKA002WJKZ J Optical Mecha. Unit, Cover AV
5-9 LHLDW1046CEZZ J Wire Holder, x2 AA
5-10 LHLDW1076GEZZ J Cable Clamp Holder, x3 AA
5-11 LHLDZA001WJKZ J Mirror Adj. Holder, x3 AD
5-12 MSPRP1198CEFW J Mirror Fixing Spring, x6 AD
5-13 NFANSA002WJZZ J Blow Fan AV
5-14 NFANSA003WJZZ J Blow Fan AU
5-15 PCOVZA001WJKZ J PBS Fan Holder AH
5-16 PCOVZA002WJKZ J Lamp House AS
5-16 LHLDW1182CEZZ Hoder AC
5-17 PFiLWA049WJZZ J Incoming PF(G) BF
5-18 PFiLWA022WJZZ J Incoming PF(B) BG
5-19 PFiLWA023WJZZ J Incoming PF(R) BD
5-20 PFiLWA043WJZZ J UV Absorbing Filter AW
5-21 PLNS-A027WJZZ J Fly-eye Lens-1 BL
5-22 PLNS-A007WJZZ J Fly-eye Lens-2 BS
5-23 PLNS-A008WJZZ J Condenser Lens-1 AX
5-24 PLNS-A009WJZZ J Condenser Lens-2, x2 AS
5-25 PLNS-A010WJZZ J Relay Lens-1 AT
5-26 PLNS-A011WJZZ J Relay Lens-2 AQ
5-27 PLNS-A012WJSA J Projection Lens BZ
5-28 PLNS-A015WJZZ J Relay Lens-3 AS
5-29 PMiR-0219CEZZ J Reflection Mirror(M3) AS
5-30 PMiR-A005WJZZ J Reflection Mirror(M1) AZ
5-31 PMiR-A006WJZZ J Reflection Mirror(M2) AV
5-32 PMiR-A008WJZZ J Reflection Mirror(M4) AM
5-33 PMiR-A009WJZZ J Reflection Mirror(M5) AL
5-34 PSLDHA003WJFW J Heat Sink, for Lamp House AF
5-35 PSLDHA004WJFW J Heat Sink, for Lamp House AF
5-36 PSPAT0076CEZZ J Teflon Tape, x2 AC
5-37 PSPAZ0373CEZZ J Fan Spacer, x2 AC
5-38 PSPAZA013WJZZ J Mirror Spacer, x10 AB
5-39 PSPAZA014WJZZ J Blow Fan Spacer, x3 AD
5-40 PSPAZA016WJZZ J Fixing Spacer, x13 AB
5-41 PSPAZA017WJZZ J Fan Spacer, x2 AB
5-42 PSPAZA090WJZZ J Glass Tape, x1 AF
5-43 QCNW-A546WJZZ J Connecting Cord AG
5-44 RH-HXA003WJZZ J Temp. Sensor AH
5-45 XBPSF30P08JS0 J Screw, x22 AA
5-46 XEBSD30P12000 J Screw, x4 AA
5-47 LHLDW1182CEZZ J Hoder AC

Temp. Sensor Attaching Angle

AD

14

OPTICS MECHANISM PARTS-1/2
TEILE FÜR OPTIKMECHANISMUS-1/2

H

XG-C60X

5-2

5-2-6

5-2-6

G

5-2-6

5-2-6

5-2-2

5-2-7

5-2-1

5-2-7

5-2-5

5-2-7

A

5-2-3

5-2-6

5-2-4

5-2-1

F

5-3

E

5-3-1-12

5-3-1-6

5-2-7

5-3-1-15

5-3-1-1

5-3-1-10

5-2-2

5-2-7

5-3-1-1

5-3-1-7

5-3-1-15

5-3-1-1

5-3-1-13

5-3-1-10

5-3-1-6

5-1

5-1-8

5-1-1

5-1-14

5-1-15

5-1-16

5-1-4

5-1-2

5-1-12

5-1-11

5-3-1-9

5-3-1-3

5-3-1-10

5-3-1-4

5-3-1-14

5-3-1-6

5-3-1-6

5-5

5-1-7

5-1-13

5-1-5

5-1-9

5-1-9

5-1-6

5-1-5

5-1-9

5-1-10

5-1-16

5-1-9

5-1-9

5-1-9

5-1-10

5-1-9

5-1-10

5-1-9

5-47

5-3-4

D

5-3-1

C

5-3-3

5-3-5

5-27

B

A

5-3-1-5

5-3-1-2

5-3-1-11

5-3-2

5-3-1-16

5-3-1-8

15

654321

XG-C60X

OPTICS MECHANISM PARTS-2/2
TEILE FÜR OPTIKMECHANISMUS-2/2

H

5-4

5-4-9

5-4-1-4

G

F

E

D

C

A

5-16

5-34

5-35

5-39

5-45

5-9

5-43

5-45

5-21

5-14

5-41

5-4-9

5-8

5-10

5-39

5-4-6

5-4-3

5-11

5-45

5-45

5-22

5-4-4

5-32

5-4-14

5-45

5-23

5-24

5-19

5-44

5-6

5-12

5-4-9

5-45

5-30

5-24

5-17

5-4-1-3

5-42

5-20

5-45

5-12

5-31

5-26

5-4-1-4

5-11

5-45

5-40

5-29

5-4-1-2

5-36

5-45

5-25

5-38

5-46

5-4-1

5-4-1-1

5-4-1-1

5-4-7

5-11

5-45

5-18

5-7

B

5-37

5-12

A

5-45

5-37

5-12

5-13

5-39

5-15

5-45

5-28

5-33

5-46

654321

16

XG-C60X

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

SUPPLIED ACCESSORIES

å QACCDA010WJPZ J Power Cord AR

å QACCVA011WJPZ J Power Cord AT

å QACCBA012WJPZ J Power Cord (for U.K., AX

å QACCLA018WJPZ J Power Cord(for Australia,

PFiLDA005WJZZ J Extra Air Filter AF

(for U.S., Canada, etc)

(for Europe except U.K. and
Korea)

Hong Kong and Singapore)

QCNWGA012WJPZ J RGB Cable AS
QCNWG0007CEPZ J USB Cable AL
QCNWGA015WJPZ J
RCORF0083CEZZ J Core, for Power Cord AL

RRMCGA176WJSA J Remote Control BA
95E103RRC21202 J Battery Cover AE
TCADEA095WJZZ J Questionnaire Card
TCAUZA015WJZZ J Stipulation Card AE
TiNS-B043WJZZ J Operation Manual
TiNS-A867WJZZ J Operation Manual (Install AG

TLABZA364WJZZ J Quick Guide Label AF
UDSKAA042WJZZ J CD-ROM(INS) AQ
UDSKAA043WJZZ J CD-ROM(SAPS) AQ
CGAN-A234WJ01 J ER Package

RUNTKA061WJZZ J Remote Mouse Receiver BL

New Zealand and Oceania)

DIN-D-sub RS-232C Adaptor

(for U.S., Canada, etc)

Guide)

(for U.S., Canada)

AK

PACKING PARTS

(NOT REPLACEMENT ITEM)

SPAKCB071WJZZ – Packing Case (for U.S., —

SPAKCB182WJZZ – Packing Case (for U.K., —

SPAKFA040WJZZ –
SPAKFA071WJZZ – Partition —
SPAKP0805CEZZ – Polystylene Cover —
SPAKXA053WJZZ – Buffer Material, x2 —
SSAKA0160CEZZ – Polyethylene Bag —
TLABK0001TAZZ – No. Label —
TLABK0023TAZZ – No. Label —

Canada, Europe except U.K.,
Korea, Australia, New Zealand
and Oceania)

Hong Kong and Singapore)
Packing Case, for Accessories

—

EXTENSION CABLE

(Use for servicing)

QCNW-A868WJZZ J Connecting Cord CE

QCNW-A869WJZZ J Connecting Cord CE

QCNW-A870WJZZ J Connecting Cord CE

QCNW-5688CEZZ J Connecting Cord, x3 BK

(Output-Input)

(Output-PC I/F)

(Output-PC I/F)

(Output-LCD)

17

XG-C60X

PACKING OF THE SET/VERPACKEN DES GERÄTS

Remote Control

Packing Case,
for Accessories

Buffer Material

Remote Control
"AA" size Battery (2pcs)
Power Cord
RGB Cable
USB Cable
DIN-D-sub RS-232C Adaptor
Extra Air Filter
CD-ROM (SAPS)
CD-ROM (INS)
Operation Manual
Quick Guide Label
Remote Mouse Receiver

Front

Polystyrene Cover

Lens Cap

Packing Case

Fix with craft tape.

No. Label

Fix with 8 staples.

18

XG-C60X

19

XG-C60X

COPYRIGHT © 2003 BY SHARP CORPORATION

ALL RIGHTS RESERVED.

No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

TQ1629-S

Sep. 2003 Printed in Japan

In Japan gedruckt

Design and Production Information
Design : Japan
Production : Japan

SY. DS

SHARP CORPORATION
AV Systems Group
Quality & Reliability Control Center
Yaita, Tochigi 329-2193, Japan