SEA PalmCopy Operating Instructions Manual
Sistemi elettronici
di Aperture Porte e Cancelli
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
English
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
OPERATING INSTRUCTIONS
INDEX
Do you want to have your personal installer code? .......................................................7
Do you want to set a suitable radio frequency for your transmitter?...............................7
Do you want to change language of your terminal?........................................................7
Do you want to set the automatic switch off time of your terminal?................................7
Do you want to create a new code for your transmitter?............................................... 8
Do you want to read the memorized code on the radio transmitter ?.............................8
Do you want a clone of your radio transmitter?..............................................................8
Do you want to check if your radio transmitter is memorized on the EEPROM memory?............8
Do you want to read and modify the whole data of the memory of your control unit?....9
Do you want to cancel all data from the EEPROM?......................................................9
Do you want to input some codes into the memory ?...................................................9
Do you want to read in the internal memory all memorized installations (max14
installations)?................................................................................................................10
Do you want to write on the internal memory ?.............................................................10
Do you want to reset the memory of all installations ?..................................................10
Do you want to see the adjustments of your automation ?...........................................10
Do you want to see the adjustments of your automation and modify them?.....................10
1
Rev. 04 - 09/2007
Sistemi elettronici
di Aperture Porte e Cancelli
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
English
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
TERMINAL FOR THE CODE ADMINISTRATION
CODES SMART E-COPY
The Palm terminal has been projected and developped by SEA purposely
to help the installer through all the operations of new installations and /or
maintenance of the radio smart e-copy.
In a Signal receiver ( no matter if connected on the control unit or if for
external Box), all the authorized codes are inside its memory module.
When this memory module is pulled out from the receiver and inserted in
the special connector of the terminal, it can be read, wrote or modified etc.
The memory of the receiver includes also special datas concerning the
installation: installer code (password) and the installation code;
Whereas on the terminal it is possible to set the reception frequency of
the terminal (433MHz, 868MHz), the switch off time of the terminal when
not used and the choice of the language.
Legend
1 Display
2 Membrane keypad
1
3 Connector for the memory plug-in
4 External current supply 12Vdc socket
5 Rs232 connector for the connection to the PC
Contents of the accessories case
- 12Vdc transformer for the current supply of
the terminal when batteries are
not included
2
- RS 232 cable fo the connection to the PC
CD ROM (23105280) optional accessory
5
- Software for the PC codes adminstration
Description of the functions
- Detailed users adminstration: name,
4
3
surename, complete address
- Insertion, modification or erase users
- Administration of installation archives
- prints
Rev. 04 - 09/2007
2
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Sistemi elettronici
di Aperture Porte e Cancelli
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
GENERAL STRUCTURE OF THE DISPLAY
MAIN MENU
I/0
SWITCH ON
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
English
A: Code admin.
B: Other functions
CODE ADMINISTRATION
A
A: Code administration
B: Other functions
A:Transmitter
B:Memory
C:Choose Installation
D:Gate administration
Administrates the operations as creation, transmission and memorisation of a
A
radio transmitter.
Administrates all the information concerning the memory of the transmitter.
B
Administrates the information concerning the different installations.
C
A: Transmitter
B: Memory
C: Choose Installation
D: Gate administration
3
Allows to read and modify the parameters set on the automation (pausing time,
D
copy, slow down, etc.)
ESC
To return to the preceding menu at any choice.
ENT
To confirm a made choice.
Rev. 04 - 09/2007
Loading...